8533J82AVBE1 概述
Subminiature Pushbutton Switches 超小型按钮开关
8533J82AVBE1 数据手册
通过下载8533J82AVBE1数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载C&K 8500 Series
Subminiature Pushbutton Switches
Features/Benefits
Typical Applications
A
• Pre-travel or over-travel models
• Detection
available
• Telecommunications and
• Ratings up to 3 AMPS
• Reliable contact design
• RoHS compliant
networking equipment
• Computers and peripherals
Models Available
Specifications
Materials
CONTACT RATING: Q contact material (853X Models): 1 AMP @
120 V AC or 28 V DC; (855X Models): 3 AMPS @ 120 V AC or
28 V DC. See page A-63 for additional ratings.
CASE: Glass filled phenolic or diallyl phthalate (DAP) (UL 94V-0).
PLUNGER: Phenolic or glass filled polyester, black standard(UL94V-0).
CAP & FRAME: Nylon, black, standard.
ELECTRICAL LIFE:
BUSHING: Brass, nickel plated.
853X MODELS: 250,000 actuations at full load.
855X MODELS: 10,000 actuations at full load.
CONTACTS: Q contact material: Coin silver, silver plated. See page
A-63 for additional contact materials.
CONTACT RESISTANCE: Below 30 mΩ typ. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
TERMINALS: Q contact material: Copper alloy, silver plated. See page
A-63 for additional contact materials.
9
INSULATION RESISTANCE: 10 Ω min.
TERMINAL SEAL: Epoxy.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 65ºC.
HARDWARE: Nut: Brass, nickel plated; Lockwasher: Steel, bright
nickel plated.
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the
latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages A-61 thru A-64. For additional options not shown in catalog, consult Customer Service Center. All
models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Switch Function
8531 SPST Off-Mom. 1 Amp
8532 SPST Off-Mom. 1 Amp
8533 SPST On-Mom. 1 Amp
8534 SPST On-Mom. 1 Amp
8551 SPST Off-Mom. 3 Amps
8552 SPST Off-Mom. 3 Amps
Actuator or Plunger
M
.150" high
J81 Snap-in with frame
J82 Snap-in with frame for LED
Terminations
Solder lug
AV Right angle, PC thru-hole
PC Thru-hole
S
T
.210" high
15/32 bushing
Z
T1 15/32 bushing with frame
C
(8532 and 8534 only)
Contact Material
Q
B
G
Silver
Gold
Gold over silver
Seal
E
D
Epoxy
No epoxy seal
Cap or Plunger Color
2
1
3
9
Black
White
Red
Frame Color
Black
NONE Models without frame
2
Gray
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–60
C&K 8500 Series
Subminiature Pushbutton Switches
SWITCH FUNCTION
A
SWITCH FUNCTION
POS. 1
POS. 2
NO.
POLES
MODEL
NO.
ACTUATION
FORCE
RATING
TOTAL TRAVEL
SCHEMATIC
8531
8551
1 AMP
with overtravel
.042 (1,07) TYP.
SP
OFF
MOM.
.095 (2,41) TYP.
7.7 oz (220g) TYP.
N.O. with overtravel
3 AMPS
SPST
Part number shown: 8531MZQE2
8532
8552
1 AMP
3 AMPS
SP
OFF
MOM.
.050 (1,27) TYP.
6 oz (170g) TYP.
N.O.
SPST
Part number shown: 8532MZQE2
with pretravel
.057 (1,45) TYP.
8533
8534
1 AMP
1 AMP
ON
ON
MOM.
MOM.
.080 (2,03) TYP.
.032 (0,81) TYP.
11.5 oz (456 g) TYP.
10.3 oz (282g) TYP.
N.C. with pretravel
SP
with overtravel
.028 (0,71) TYP.
N.C. woth overtravel
SPST
Part number shown: 8533MZQE2
MOM. = Momentary
All models
with all options when ordered with G or Q contact material.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–61
C&K 8500 Series
Subminiature Pushbutton Switches
PLUNGER COLOR
PLUNGER
ACTUATOR OR PLUNGER
A
M
.150" HIGH PLUNGER
S
.210" HIGH PLUNGER
PANEL MOUNTING
OPTION
CODE
PLUNGER COLOR
2
3
BLACK
RED
NOTE: One mounting nut and lockwasher supplied with all actuators (except T actuator: two nuts supplied).
CAP COLOR
ACTUATOR
ACTUATOR OR PLUNGER
PANEL MOUNTING
T
15/32 BUSHING
OPTION
CODE
CAP COLOR
BLACK
NOTE: No frame color choice required.
T1 15/32 BUSHING WITH FRAME
2
1
3
9
WHITE
RED
GRAY
Cap Finish: gloss. Other colors available,
consult Customer Service Center.
One mounting nut and lockwasher
supplied with all actuators (except T
actuator: two nuts supplied).
NOTE: Caps available for plunger
options, see page A-63.
NOTE: No frame color choice required.
Available with 8532 and 8534 models only.
CAP COLOR
ACTUATOR—SNAP-IN FRONT MOUNT
ACTUATOR OR PLUNGER
FRAME COLOR
OPTION
CODE
CAP AND FRAME
COLOR
J81 SNAP-IN WITH FRAME
2
BLACK
Cap and Frame Finish: matte.
Other colors available,
consult Customer Service Center.
One mounting nut and lockwasher
supplied with all actuators.
NOTE: Caps & frames available
separately, see pages A-63 and A-64.
J82 SNAP-IN WITH FRAME FOR LED
NOTE: LED snaps
securely into frame.
Height depends on
LED used.
LED not included.
For LED information, see page A-64.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–62
C&K 8500 Series
Subminiature Pushbutton Switches
TERMINATIONS
A
C
PC THRU-HOLE
Z
SOLDER LUG
PC MOUNTING
AV RIGHT ANGLE, PC THRU-HOLE
MODEL NO.
DIM “X”
DIM. "X"
8531, 8533, 8551
8532, 8534, 8552
0.500
0.438
NOTE: Available with M or S plunger models only
CONTACT MATERIAL
OPTION
CODE
RoHS
COMPLIANT *
RoHS
COMPATIBLE *
TERMINAL
PLATING
CONTACT
MATERIAL
RATINGS
1
GOLD
YES
YES
YES
YES
YES
YES
GOLD
LOW LEVEL/DRY CIRCUIT
POWER
0.4 VA MAX. @ 20 V AC OR DC MAX.
B
Q
G
853X MODELS: 1 AMP @ 120 V AC OR 28 V DC.
855X MODELS: 3 AMPS @ 120 V AC OR 28 V DC.
4
5
SILVER
SILVER
0.4 V MAX @20 V AC OR DC MAX. OR 853X MODELS: 1 AMP @
120 V AC OR 28 V DC. 855X MODELS: 3 AMPS @120 V AC OR 28 V DC.
LOW LEVEL/DRY
CIRCUIT OR POWER
GOLD OVER
3
GOLD
2
SILVER
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the
latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
CONTACTS: Coin silver, with gold plate over nickel plate.
TERMINALS: Copper alloy, with gold plate over nickel plate.
CONTACTS: Coin silver, silver plated.
2
3
4
5
All models
with all options when ordered with G or Q contact material.
Q contact material standard with C, Z terminations.
8551 & 8552 available with Q contact material only.
TERMINALS: Copper alloy, silver plated.
SEAL
E
EPOXY SEAL
AVAILABLE HARDWARE
Cap
Cap, J80, J81 & J 82 options only
Frame
.331 DIA.
(8,41È)
.150 (3,81)
FOR 267A
.200 (5,08)
FOR 8931
.300
(7,62)
PART NO.
PART NO.
267A01000 WHITE
267A02000 BLACK
267A03000 RED
267A09000 GRAY
893101000 WHITE
893102000 BLACK
893103000 RED
893109000 GRAY
PART NO.
448901000 WHITE
448902000 BLACK
448903000 RED
448909000 GRAY
PART NO.
85X2T, 8534T
models only
85X1T, 8532T1,
8533T, 8534T1 models only
613302263 BLACK
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss or matte
Material: Nylon
Finish: Matte
Third Angle
Projection
Other colors available, consult Customer Service Center.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–63
C&K 8500 Series
Subminiature Pushbutton Switches
AVAILABLE HARDWARE
A
Frame
PART NO.
NOTE: Additional nuts, locking rings and lockwashers available separately, see section
“Technical Data and Additional Hardware”.
615602263 BLACK
Other colors available, consult Customer Service Center.
Material: Nylon
Finish: Matte
TYPICAL APPLICATION
Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC
mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and
frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte.
.047" (1,19) PANEL THK.
.062" (1,57) PANEL THK.
.090" (2,29) PANEL THK.
.125" (3,18) PANEL THK.
PART NO.
PART NO.
PART NO.
PART NO.
432502263
432602263
432702263
432802263 BLACK
Panel Inserts
Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for
indicator light assembly. Order insert separately from frame. Blank insert panel (without hole
for LED) also available. LED not included.
PANEL INSERT
BLANK PANEL INSERT
WITH HOLE FOR LED
WITHOUT HOLE FOR LED
PART NO.
PART NO.
894902000
476602000 BLACK
Special colors, custom markings available, consult Customer Service Center.
LED INFORMATION
Process Information: Soldering to LED leads must be completed within 5 seconds
at 500ºF (260ºC) maximum.
.025 SQ.
TYP. (0,63)
Flat denotes
cathode.
.200 DIA.
(5,08˘)
LEDs are not supplied with J82 option. LED snaps into switch frame surrounding
actuator and is wired externally.
.030
(0,76)
.230 DIA.
(5,84˘)
.750
(19,05)
.340
(8,64)
Suggested LED for J82 option.
Dimensions for reference only.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–64
8533J82AVBE1 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
8533J82AVBE12 | ITT | Subminiature Pushbutton Switches | 获取价格 | |
8533J82AVBE2 | ITT | Subminiature Pushbutton Switches | 获取价格 | |
8533J82AVBE22 | ITT | Subminiature Pushbutton Switches | 获取价格 | |
8533J82AVQD1 | ITT | Subminiature Pushbutton Switches | 获取价格 | |
8533J82AVQD12 | ITT | Subminiature Pushbutton Switches | 获取价格 | |
8533J82AVQD2 | ITT | Subminiature Pushbutton Switches | 获取价格 | |
8533J82AVQD22 | ITT | Subminiature Pushbutton Switches | 获取价格 | |
8533J82AVQE1 | ITT | Subminiature Pushbutton Switches | 获取价格 | |
8533J82AVQE12 | ITT | Subminiature Pushbutton Switches | 获取价格 | |
8533J82AVQE2 | ITT | Subminiature Pushbutton Switches | 获取价格 |
8533J82AVBE1 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6