2DC79S-F0 [ITT]
D SUB;Nano Miniature NDD Series Connectors
The Challenge
ICS’s top tier Micro connector customers approached ITT, Interconnect Solutions about a high density and robust low profile Nano
miniature connector that allowed more signal carrying capacity in a smaller package. In addition, these customers identified the need
to have these connectors perform in high shock and vibration environments as well as high temperature +200 degree C environ-
ments. These same customers requested the use of ITT’s standard twist pin contact system within this new form factor of products.
Standard hardware accessories featuring
jackscrew assembly option accommodating
increased functionality in user applications
Knurled Jack Screws for ease of mating
High temperature LCP dielectric material
providing wider range of operating capabili-
ties for hostile environments
Proven twist pin contact construction
with 5 points of electrical contact and high
reliability crimp joints yielding robust con-
tact performance
Thru hole PCB Mount with mating plug con-
nector accommodating placement directly
on printed circuit boards. SMT version avail-
able in the future
D
Multiple contact layouts from 9 to 51
positions, on 0.025 centers providing
greater variability in data transmission require-
ments
Cable Harnesses available in discrete
insulated wires, ribbon cable, and flex
circuit terminations
The ITT Solution …
Interconnect Solutions collated VOC information from multiple OEM’s manufacturing sophisticated electronics equipment for
Aerospace, Geophysical, and Industrial applications and correlated this input with market trend data for small form factor
connectors. Based on the strong VOC results and ITT's engineering expertise in designing and manufacturing micro miniature
connectors, ICS developed the dual row Nano Miniature NDD Series connector family. This new family of nano miniature
connector products addresses the harsh environments typically seen in our customers’ applications and provides higher density
signals within a smaller profile connector package.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
D-73
Nano Miniature NDD Series Connectors
Technical Overview
ITT has been manufacturing harsh environment single row nano miniature connectors since 1971. The new NDD series from
ITT takes advantage of ITT’s over 35 years experience in nano miniature connector design to introduce a new level of innovative
higher density family of connector products. This new Nano Miniature NDD Series connector will be qualified to the new mil-
itary specification MIL-DTL-32139.
ITT`s NDD miniature connectors are small form factor high density interconnects designed and manufactured for high relia-
bility and harsh environment applications. These interconnects are ideal where size and weight limitations require an ultra low
profile and robust interconnect package. Utilizing our innovative twist pin contact system on 0.025 contact spacing and having
5 points of electrical contact, the NDD series offers an extremely rugged small form factor interconnect solution. Typical appli-
cations for the NDD series are Avionics, Aerospace, Defense Electronics, Geophysical, Industrial Control Systems, and Medical
Diagnostics.
Twist Pin technology
At the heart of ITT’s new dual row NDD series we've incorporated our proven twist pin contact system. The twist pin contact
system has been utilized exclusively for ITT’s larger MDM series of products for over 45 years.
D
NDD Series- Nano Miniature Connector Performance Summary
Dielectric Withstanding Voltage:
Contact Rating:
250 VAC RMS at Sea Level, 100 VAC RMS at 70,000 feet
1 amp maximum
Wire Accommodation:
Insulation Resistance:
Contact Resistance:
#30-#32 AWG
5000 Meg ohms min @ 100 VDC
71 mv max @ 1 amp
Engagement/Separation Force:
Operating Temperature:
Humidity (Mated):
Forces not to exceed 5 oz/contact
-55 ° C to +125 ° C*
Per EIA-364, procedure 31-A
Vibration:
Mechanical Shock:
Durability:
Mating/Unmating after Durability:
Salt Spray/Corrosion Resistance:
Thermal Vacuum Out gassing:
20 g's, in accordance with EIA-364-28, condition IV
100 g's, in accordance with EIA-364-27m condition G
500 cycles of mating durability (500 CPH Max)
Forces not to exceed 7 oz/contact
48 hour salt spray, in accordance with EIA-364-26, condition B
Total Mass Loss (TML) 1.0% maximum, Volatile Condensible Material, (VCM) 0.1% Max
* Temperature Rating of -55 ° C to +200 ° C available with special termination processes
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
D-74
Nano Miniature NDD Series Connectors
Electrical Specifications for the Connector
ITT’s dual row NDD series of connectors h
drop maximum. This new connector serie
altitude. Insulation resistance for the conn
ave a contact rating of 1 Amp maximum
s has a voltage rating of 250 VAC RMS at
ector series is rated at 5000 megaohms m
with a contact resistance rating of 71 mil
livolt
sea level and a 100 VAC RMS at 70,000 f
inimum.
eet
Current Rating
Voltage Rating (DWV)
Insulation Resistance
250 VAC RMS seal level,
100 VAC RMS at 70,000 feet
1 AMP maximum
5000 Meg ohms minimum
Jackscrew Retainer
357-9546-000
Jackscrew, Shank
250-9553-001
Shell, Plug, Size 25
248-9797-XXX
Jacknut, knurled
with .050 Hex Key
#30 AWG Stranded
Wire
High Temp
Backpotting
Jackscrew
#0-80 UNF-2A THD
.093 min Length
Plug, 51 Position
Contact, Nanopin
on 25 mil Centers
High Temp LCP Insulator
with POS-Align Feature on
Contact Cavity lead in
Polarized Dual Lobe
Dual Row
Machined Shell
Insulator, Plug, Size 25
134-9000-003
Gold plated Micropin
031-9542-006
ITT PART NUMBER NOMENCLATURE TO MIL-DTL-32139
ND*
03
D25
**
*
*
*
ITT CANNON SERIES
MIL-DTL-32139 SLASH SHEET
INSERT ARRANGEMENT
WIRE TYPE
HARDWARE
SHELL FINISH
SPACE CLASS
ITT CANNON SERIES:
HARDWARE
D
NDS - Metal Shell, Single Row, Liquid Crystalline Polymer (LCP) Insulator
(Not Currently Tooled)
For slash sheets /1 and /3 only:
S = Jackscrew Installed
For slash sheets /2 and /4 only:
T = Threaded hole
NDD - Metal Shell, Dual Row, LCP Insulator
MIL-DTL-32139 SLASH SHEET
01 - Connector, Plug, Single Row, Nano Miniature, Dual Lobe Polarization
02 - Connector, Receptacle, Single Row, Nano Miniature, Dual Lobe Polarization
03 - Connector, Plug, Dual Row, Nano Miniature, Dual Lobe Polarization
04 - Connector, Receptacle, Dual Row, Nano Miniature, Dual Lobe Polarization
SHELL FINISH
C =Aluminum, Cadmium Finish
N =Aluminum, Electroless Nickel Finish
S =Stainless Steel, Passivated – Not currently tooled by ITT Cannon
T =Titanium – Not currently tooled by ITT Cannon
INSERT ARRANGEMENT
*A9 - 9 Contacts
SPACE CLASS
Blank = For Non-Space Applications
S = Space Class Testing Performed
B15 - 15 Contacts
*C21 - 21 Contacts
D25 - 25 Contacts
*E31 - 31 Contacts
F37 - 37 Contacts
G51 - 51 Contacts
* Not currently tooled by ITT
WIRE TYPE
01 - 6 inches long
02 -18 inches long
03 -36 inches long
04 - 6 inches long
05 -18 inches long
06 -36 inches long
#30 AWG wire per Nema HP3-ETXBBB9, White
#30 AWG wire per Nema HP3-ETXBBB9, White
#30 AWG wire per Nema HP3-ETXBBB9, White
#30 AWG wire per Nema HP3-ETXBBB(*), Color Coded per MIL-STD-681, Sys 1, Ten Solid Colors Repeating
#30 AWG wire per Nema HP3-ETXBBB(*), Color Coded per MIL-STD-681, Sys 1, Ten Solid Colors Repeating
#30 AWG wire per Nema HP3-ETXBBB(*), Color Coded per MIL-STD-681, Sys 1, Ten Solid Colors Repeating
07
-
6 inches long
#30 AWG wire per MIL-W-22759/33-30-9, White
08 -18 inches long
09 -36 inches long
10 - 6 inches long
#30 AWG wire per MIL-W-22759/33-30-9, White
#30 AWG wire per MIL-W-22759/33-30-9, White
#30 AWG wire per MIL-W-22759/33-30-(*), Color Coded per MIL-STD-681, Sys 1, Ten Solid Colors Repeating
Consult Factory for additional wire terminations
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
D-75
Nano Miniature NDD Series Connectors
Even with a wide range of choices in interconnect configurations, ITT recognized that customers were demanding higher
density connectors operating at higher temperature ranges. Based on ITT’s nearly 50 years of experience in developing Micro
interconnect technologies, we proudly present our next generation dual row NDD Nano (0.025) connector system, soon to
be qualified to the Mil DTL 32139 specification. This high density interconnect package provides a robust shock and vibra-
tion capable solution, offering multiple configurations from 9 to 51 contact positions and including PCB versions. The unique
knurled jackscrew assemblies allow for easier mating and demating, which is important for such small form factor connectors.
Also, the entire connector family can be rated for 200 degree C environments based on ITT’s material selection and process
technologies.
Product Features
• Micro twist Pin contact system
• 0.025 contact spacing
• Meets the performance requirements of
Mil DTL-32139 (Qualification in process)
• 1 amp contact rating
• LCP Dielectric with operating temperature
from -55 degrees c to 200 degrees C
• Multiple contact arrangements from
9 to 51 positions
• Knurled jack screw assembly hardware
Applications
• Defense Electronics
D
• High Temperature Geophysical Exploration
• Aerospace Structures
• Satellite Systems
• Medical Electronics
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
D-76
Double Density D - .075" Contact Spacing
2D
Standard Shell
M
A
B
L
J
K
10˚ (TYP)
G
+
+
D
E
+
+
H
C
V
TWO MTG. HOLES
.123 ± .005
(3.12 ± 0.13)
T
T
T
+ .020 (0.51)
- .000 (0.00)
+ .020 (0.51)
- .000 (0.00)
Part Number
by Shell Size
Part Number
by Shell Size
2DE19P
2DE19S
2DA31P
2DA31S
2DB52P
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.236 (5.99)
2DB52S
2DC79P
2DC79S
2DD100P
2DD100S
.236 (5.99)
.236 (5.99)
.236 (5.99)
.236 (5.99)
.236 (5.99)
.856(21.74)MAX.
Float Mount
A
B
K
G
J
N
10˚ (TYP)
+
+
H
+
+
E
D
.032 (.812)
TOTAL
DIAMETRAL
FLOAT
M
TWO MTG. HOLES
.0885 ± .0025
C
V
(2.248 ± 0.064)
Part Number
A
B
C
D
E
G
H
J
K
L
M
N
V
by Shell Size .015 (0.38)
.010 (0.25) .010 (0.25) .010 (0.25) .015 (0.38) .010 (0.25) .010 (0.25) .010 (0.25) .010 (0.25) .010 (0.25) .010 (0.25) .010 (0.25)
Max.
2DE19P
2DE19S
2DA31P
2DA31S
2DB52P
2DB52S
2DC79P
2DC79S
1.213 (30.81) .697 (17.70) .984 (24.99) .360 (9.14) .494 (12.55) .759 (19.28) .422 (10.72) .036 (.914)
.236 (5.99) .055 (1.40) .422 (10.72) .120 (3.05)
.243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05)
.236 (5.99) .055 (1.40) .422 (10.72) .120 (3.05)
.243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05)
.231 (5.87) .055 (1.40) .426 (10.82) .129 (3.28)
.243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05)
.231 (5.87) .055 (1.40) .426 (10.82) .129 (3.28)
.243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05)
.231 (5.87) .055 (1.40) .426 (10.82) .129 (3.28)
.243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
1.213 (30.81) .640 (16.26) .984 (24.99) .308 (7.82) .494 (12.55) .759 (19.28) .422 (10.72) .032 (213)
1.541 (39.14) 1.025 (26.03) 1.312 (33.32) .360 (9.14) .494 (12.55) 1.083 (27.51) .422 (10.72) .036 (.914)
1.541 (39.14) .968 (24.58) 1.312 (33.32) .308 (7.82) .494 (12.55) 1.083 (27.51) .422 (10.72) .032 (213)
2.088 (53.03) 1.583 (40.21) 1.852 (47.04) .378 (9.60) .494 (12.55) 1.625 (41.27) .422 (10.72) .036 (.914)
2.088 (53.03) 1.508 (38.30) 1.852 (47.04) .308 (7.82) .494 (12.55) 1.625 (41.27) .422 (10.72) .032 (213)
2.729 (69.31) 2.231 (56.67) 2.500 (63.50) .378 (9.60) .494 (12.55) 2.272 (57.71) .422 (10.72) .036 (.914)
2.729 (69.31) 2.156 (54.76) 2.500 (63.50) .308 (7.82) .494 (12.55) 2.272 (57.71) .422 (10.72) .032 (213)
D
2DD100P 2.635 (66.92) 2.127 (54.02) 2.406 (61.11) .484 (12.29) .605 (15.37) 2.178 (55.32) .534 (13.56) .036 (.914)
2DD100S 2.635 (66.92) 2.062 (52.37) 2.406 (61.11) .420 (10.67) .605 (15.37) 2.178 (55.32) .534 (13.56) .032 (213)
For shell with float mounts, add letter F after shell size, e.g., 2DEF19P.
Jackscrew/Jackpost Assembly
#4-40 UNC-2B
THREAD
.180 ± .025 Grip
(4.57 ± 0.64) Length
#4-40 UNC-2A THREAD
#4-40 UNC-2A THREAD
.025 (0.64)
MAX.
.025 (0.64)
MAX.
.233 (5.92)
.223 (5.66)
.180 ± .025 Grip
(4.57 ± 0.64) Length
.620 ± .010
(15.75 ± 0.25)
.230 (5.84) MAX.
.325 ± .015
(8.26 ± 0.38)
#4-40 UNC-2A THREAD
Standard (F172) Jackscrew
(factory installed)
Low Profile (F173) Jackscrew
(factory installed)
Jackpost (F171)
Front Panel Connector Mounting Only
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
D-77
Double Density D - .075" Contact Spacing
2D
Contact Arrangements
All views are pin front face. Use reverse order for socket side.
1
7
14
6
13
19
1
11
22
10
21
31
1
18
36
17
35
52
DE
DA
DB
52 Contacts
19 Contacts
31 Contacts
1
26
51
27
52
76
1
27
54
26
53
79
75
100
DC
79 Contacts
DD
100 Contacts
Cavity identification numbers are shown for reference only and do not appear on insulator front face. However they do appear on rear of insulator.
90˚ PCB Mounting - 3 Row
.0375
(0.95)
REF.
.148
(3.76)
MIN.
.075
(.190)
REF.
.125 (3.18)
.115 (2.92)
DIA. TYP.
.130 (3.30)
.100 (2.54)
2x
.690
(17.53)
MAX.
.253 (6.43)
.233 (5.92)
.100
(2.54)
REF.
.100
(2.54)
REF.
.510 (12.95)
.490 (12.45)
B
B
CAV. #1
.065 (1.65)
.075 (1.90)
.510 (12.95)
.480 (12.18)
#4-40
UNC-2B THREAD
(2 PLACES)
LAST CAV.
D
A
A
PCB Termination Leads
(all contact arrangements)
.024 (6.10) to .028 (7.11).
LAST
LEAD
Suggested finished PC hole
Size .033 (8.38) +_ .003 (0.08)
LEAD #1
Part Number
by Shell Size
A
B
C
Max.
.015 (0.38)
1.215 (30.86)
1.540 (39.12)
2.090 (53.09)
2.730 (69.34)
.010 (0.25)
2DE19SBRP
2DA31SBRP
2DB52SBRP
2DC79SBRP
.984 (24.99)
1.312 (33.32)
1.852 (47.04)
2.500 (63.50)
.690 (17.53)
.690 (17.53)
.690 (17.53)
.690 (17.53)
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
D-78
Double Density D - .075" Contact Spacing
2D
90˚ PCB Mounting - 4 Row
.0375 (0.94) REF.
.075 (1.90) REF.
.125 (3.18)
.115 (2.92)
DIA. TYP.
.130
(3.30)
MIN.
+
+ +
+
+
+
+
+
+
+
+
+
+ + +
+ +
+
+
+
+
+
+
+ + +
+
+
+
+
+
+
+ + +
+
+
+
+
+
+
+
+
+
+ +
+
+
+
+
.790
(20.07)
MAX.
+
+
+ + + +
+ + + + + +
+
+
+
+
+
+
+
+
+
.100
(2.54)
REF.
.200
(5.08)
REF.
.100
(2.54)
REF.
.253 (6.43)
.233 (5.92)
.510 (12.95)
.490 (12.45)
B
B
.075 (1.90)
CAV #1
.065 (1.65)
.620 (15.75)
.590 (14.99)
+
+
#4-40
UNC-2B THREAD
(2 PLACES)
CAV #100
D
A
A
LEAD
#100
LEAD
#1
Part Number
by Shell Size
A
B
C
+_ .015 (0.38)
2.635 (66.93)
+_ .010 (0.25)
2.406 (61.11)
Max.
2DD100SBRP
.790 (20.07)
Contact Arrangements - Page B-56
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
D-79
Double Density D - .075" Contact Spacing
2D
Panel Cutouts
A
10˚0' TYP.
B
G
F
E
H
FULL R
K TYP R
.032 (0.81) R MAX. TYP
D
C
G
D
C
Mtg.
Conn. Method
A
B
C
D
E
F
G
H
K
+_ .005 (0.13) +_ .005 (0.13)
+_ .005 (0.13) +_ .005 (0.13)
+_ .005 (0.13)
.513 (13.03)
.449 (11.40)
.513 (13.03)
.449 (11.40)
.513 (13.03)
.449 (11.40)
.513 (13.03)
.449 (11.40)
.623 (15.82)
.555 (14.10)
+_ .005 (0.13)
.257 (6.53)
.225 (5.71)
.257 (6.53)
.225 (5.71)
.257 (6.53)
.225 (5.71)
.257 (6.53)
.225 (5.71)
.312 (7.92)
.278 (7.06)
+_ .002 (0.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
+_ .002 (0.05)
+_ .002 (0.05)
2DE
2DA
2DB
2DC
2DD
Front
Rear
Front
Rear
Front
Rear
Front
Rear
Front
Rear
.874 (22.20)
.806 (20.47)
1.202 (30.53)
1.134 (28.80)
1.743 (44.27)
1.674 (42.52)
.437 (11.10)
.403 (10.24)
.601 (15.26)
.567 (14.40)
.872 (22.15)
.837 (21.26)
.984 (24.99)
.984 (24.99)
1.312 (33.32)
1.312 (33.32)
1.852 (47.04)
1.852 (47.04)
.492 (12.50)
.492 (12.50)
.656 (16.66)
.656 (16.66)
.926 (23.52)
.926 (23.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.083 (2.11)
.132 (3.35)
.083 (2.11)
.132 (3.35)
.083 (2.11)
.132 (3.35)
.083 (2.11)
.132 (3.35)
.083 (2.11)
.132 (3.35)
2.391 (60.73) 1.196 (30.38)
2.326 (59.08) 1.163 (29.54)
2.297 (58.34) 1.149 (29.18)
2.218 (56.34) 1.109 (28.17)
2.500 (63.50) 1.250 (31.75)
2.500 (63.50) 1.250 (31.75)
2.406 (61.11) 1.203 (30.56)
2.406 (61.11) 1.203 (30.56)
For contact part numbers, termination tooling and assembly see pages D-86 to D-88.
Panel Mounting
3/32 THICKNESS (REF.)
RECOMMENDED
RIVET THICKNESS
D
Front Mounting
Standard
Front Mounting
Float
RIVET THICKNESS
Rear Mounting
Standard
Rear Mounting
Float
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
D-80
Double Density D - .075" Contact Spacing
2D*D
Environmentally sealed Double Density D con-
nector offers superior vibration and moisture
resistant characteristics.
The connector features superior environmental
sealing which makes it suitable for any application
where severe environmental protection is critical.
The connector's contact density design was
achieved by using field proven, highly reliable
Centipin/Centisocket contacts on .075" centers.
Designed to maximize positive contact mating, the
contact positions are reversed, leaving the flexible
Centipin contacts recessed in the insulator while
the more ruggedized centisocket contacts are ex-
posed.
This reversal of positions and the chamfered-entry
of the sockets assures positive mating even under
severe conditions where misalignment of mismatch-
ing of the connector might occur.
High reliability and protection of the contacts is
A rubber grommet seal the signal wires and
assured through superior environmental sealing. connector from external contaminants and mois-
The socket contacts as well as the Centipin con- ture. The 90˚ PCB mounting 2D*D is potted behind
tacts, which feature ITT Cannon's reliable Twist Pin the grommet for additional sealing.
contact design, are retained in the connector body.
How to Order
2D
D
D
100
P
-
* * *
-
* * *
SERIES
SHELL SIZES
CLASS
CONTACT ARRANGEMENT
CONTACT STYLE
MODIFICATION CODES
SERIES:
CONTACT ARRANGEMENT
MODIFICATION CODES
2D-Double Density "D"
100*
* * * (Two 3-digit codes permissible)
F0 - Connector without contacts
Consult factory for sizes 19, 31, 52, 79
SHELL SIZES:
(F0 will not be printed on the connector)
6 - Environmental D 90˚ PCB mounting
(socket configuration only)
D*
CONTACT STYLE
P - Centi-Loc pin (receptacle shell config.)
Consult factory for size E, A, B, C
D
S - Centi-Lock socket (plug shell config.)
CLASS:
D - Environmental
* ITT Cannon is currently tooled in size D 100 contact version only.
Standard Data
Contacts:
MATERIALS AND FINISHES
Insertable/removalbe gold-plated size 22 centi-loc
crimp contacts (wire sizes #22 thru #26 AWG,
stranded or solid).
Housings
Aluminum alloy, yellow chromate over cadmium plate
Peripheral Seal
Insulators
Silicone
Diallyl Phthalate
Contacts Retainer
Grommet
Nylon
Polychloroprene (bonded to housing)
Contact Arrangement
View of pin front face, use reverse order for socket side
1
26
51
27
52
76
75
100
2000
100 Contacts
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
D-81
Double Density D - .075" Contact Spacing
2D*D
90° PCB Mounting
Plug/Socket Connector
2DDD100S-6
.368
(9.35)
.298
(7.57)
CAV #76
CAV #100
.601 (15.27)
.591 (15.01)
.741 (18.82)
.731 (18.57)
.125 (3.18)
CAV #1
CAV #26
.115 (2.92)
2 PLCS
DIA.
2.865 (72.77)
2.855 (72.52)
2.536 (64.41)
2.526 (64.16)
2.865 (72.77)
2.855 (72.52)
.312 (7.92)
.296 (7.52)
INSULATOR
LOCATION
.125
(3.18)
2 PLCS
1.266
(32.16)
.190 (4.83)
.173 (4.39)
FROM INSULATOR
2.255 (57.28)
2.245 (57.02)
.434 (11.02)
.426 (10.82)
LEAD #100
LEAD #76
.064 (1.63)
.058 (1.47)
.266
(6.76)
.200
(5.08)
.300
(7.62)
.089
.750
(2.26)
(19.05)
.030 (0.76)
.026 (0.66)
DIA. TYP
.100
(2.54)
.366
(9.30)
.0375
(0.95)
TYP.
.9375
(23.81)
.125 (3.18)
.115 (2.92)
2 PLCS
DIA.
LEAD #1
.075 TYP.
(1.91)
2.250
(57.15)
LEAD #26
1.875
(47.63)
2.531
(64.29)
.640
(16.26)
2.531
(64.29)
.342
(8.69)
2 PLCS
.125 (3.18)
.095 (2.41)
.026
(0.66)
.125
(3.18)
2 PLCS
.299
(7.59)
2 PLCS
All tolerance are +_ .010 (0.25) unless otherwise noted.
Standard Mount
Receptacle/Pin Connector
2DDD100P
.060 (1.52)
.057 (1.45)
D
.064 (1.63)
.058 (1.47)
.053 (1.35)
.043 (1.09)
(INSERT LOCATION)
.035 (0.89)
FROM INSULATOR
.015 (0.38)
.660 (16.76)
MAX.
SEAL RING
(SILICONE)
2.864
(72.75)
MAX.
.740
(18.80)
MAX.
.600
(15.24)
MAX.
2.255
(57.28)
MAX.
.122 (3.10)
.118 (3.00)
DIA. TYP.
2.536 (64.41)
2.526 (64.16)
All tolerance are +_ .010 (0.25) unless otherwise noted.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
D-82
Double Density D - .075" Contact Spacing
2D*D
Standard Mount (continued)
Plug/Socket Connector
2DDD100S
.064 (1.63)
.058 (1.47)
(REF)
.428 (10.87)
.423 (10.74)
.690
(17.53)
MAX.
.312 (7.92)
.296 (7.52)
.094 (2.39)
.084 (2.13)
.190 (4.83)
.173 (4.39)
FROM INSULATOR
2.864
(72.75)
MAX.
2.255
(57.28)
MAX.
.740
(18.80)
MAX.
.600
(15.24)
MAX.
.122 (3.10)
.118 (3.00)
DIA. TYP.
2.536 (64.41)
2.526 (64.16)
All tolerances are +_ .010 (0.25) unless noted otherwise.
Panel Cutout
USE .120(3.05) DIA. HOLE OR 4-40 TAP (CUSTOMER PREFERENCE) FOR FRONT MOUNTING
FOR REAR MOUNTING USE .120(3.05) DIA. HOLE COUNTERSUNK FOR FLATHEAD SCREW.
.083(2.11) R. MAX.
TYPICAL
F
D
E
C
A
D
Shell
Size
A
C
Min.
D
E
Min.
F
+_ .010 (0.25)
+_ .010 (0.25)
+_ .006 (0.15)
2DDD-100
2.859 (72.62)
2.265 (57.53)
.735 (18.67)
.610 (15.49)
2.531 (64.29)
Note: Panel cutout does not allow for potting cup clearance.
Mounting Dimensions
.324 +_ .010*
.292 +_ .010*
(7.42 +_ 0.25)
.189 +_ .015*
(4.80 +_ 0.38)
.230 +_ .013*
(5.84 +_ 0.32)
(8.23 +_ 0.25)
.133 +_ 0.10*
.230 +_ .013*
(5.84 +_ 0.32)
(3.38 +_ 0.25)
PLUG
REAR
FRONT
REAR
FRONT
PLUG
PLUG
RECEPT
RECEPT
RECEPT
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
With both connectors rear mounted, use #4-
40 flat head screws flush with the panel.
With both connectors rear mounted (float
mounting on either plug or receptacle side),
use #4-40 flat head screws, flush with the
panels.
With plug assembly front mounted and re-
ceptacle assembly rear mounted, use hard-
ware from Figures 5 and 6. If float mounting
is desired, use Figure 3 or 4 for the float
mounted connector.
1.
2.
3.
4.
5/6.
With both connectors front mounted, use
#4-40 binder or pan head screws.
With both connectors front mounted (float
mounting on either plug or receptacle side),
use #4-40 binder or pan head screws.
*Dimensions between panels represent the recommended limit to be used in the design of the connector mounting method.
NOTE: Max. panel thickness is .125 (3.17) for non-floating rear panel mounting.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
D-83
相关型号:
2DC79SBRF172
D Type Connector, 79 Contact(s), Female, 0.075 inch Pitch, Solder Terminal, #4-40, Plug
ITT
2DC79SBRF173
D Type Connector, 79 Contact(s), Female, 0.075 inch Pitch, Solder Terminal, #4-40, Plug
ITT
2DC79SBRP
D Subminiature Connector, 79 Contact(s), Male, 0.075 inch Pitch, Solder Terminal, #4-40, Plug
ITT
2DC79SF173
D Type Connector, 79 Contact(s), Female, 0.075 inch Pitch, Crimp Terminal, #4-40, Plug
ITT
2DCF79P
D Subminiature Connector, 79 Contact(s), Male, 0.075 inch Pitch, Crimp Terminal, Hole .087-.098, Receptacle,
ITT
2DCF79PBRP
D Type Connector, 79 Contact(s), Male, 0.075 inch Pitch, Solder Terminal, #4-40, Receptacle
ITT
2DCF79PBRPFO
D Type Connector, 79 Contact(s), Male, 0.075 inch Pitch, Solder Terminal, #4-40, Receptacle
ITT
2DCF79S
D Subminiature Connector, 79 Contact(s), Female, 0.075 inch Pitch, Crimp Terminal, Hole .087-.098, Plug,
ITT
©2020 ICPDF网 联系我们和版权申明