2DAF31SBRF171 [ITT]
The Centi Line - .075 Contact Spacing; 在厘线 - 0.075触点间距型号: | 2DAF31SBRF171 |
厂家: | ITT Cannon |
描述: | The Centi Line - .075 Contact Spacing |
文件: | 总11页 (文件大小:395K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The Centi Line - .075" Contact Spacing
The Cannon Centi connectors are especially
suitable for commercial applications such as
computers, instrumentation, communications
and audio equipment. They are available in D
All Centi connectors use the reliable twist pin
The twist pin contact is recessed within the
insulator housing while the rugged cylindrical
socket is exposed. When the connector halves
are mated, the chamfered sockets guide the
contact design in a 5 amp version terminated
on .075 (1.91) and .100 (2.54) centers. The
Centi contact is crimp removable, connectors
subminiature size metal shell rectangular, plas- are available for customer assembly. Standard pins into positive alignment. The CentipinTM
tic shell rectangular and strip configurations.
crimp and assembly tools are available.
contact, now under compression, forms a
multi-point contact with the CentisocketTM to
provide a high degree of reliability.
Standard Data
• Contact rating: 5 amps max, except BR
Series (2 amps max.)
• Contact retention: Crimp snap-in/removable.
• Contact materials and finish: Copper alloy,
gold- plated per ASTM B488, Type II, Code
C, Class 1.25.
• Minimum contact centers: 0.075 (1.91).
• Wire sizes: #22 thru #26 AWG, stranded or
solid.
• Mating/unmating force: 12 oz. per contact,
max.
• Contact termination: Multiple indent crimp.
Performance Data
Test
Method
Criteria of Acceptance
Dielectric Withstanding Method 301:
Voltage
1,000 VAC at sea level
No breakdown
No breakdown
300 VAC at 70,000' altitude
Insulation Resistance
Thermal Shock
Method 302, Condition A
5,000 megohms minimum
No physical damage
Method 107, Condition A
+55˚C to +85˚C
Physical Shock
Method 213, Condition I:
100 G's, 3 axes, 6 millisecond
duration sawtooth pulse
No physical damage
No loss of continutiy> 1/µsec
Vibration
Durability
Method 204, Condition B:
No physical damage
15 G's, 10-2,000 Hz, 12 hours
No loss of continuity> 1µsec
500 cycles of mating and
unmating, 500 CPH max.
No mechanical or electrical defects
Moisture Resistance
Salt Spray
Method 106, Omit 7a and 7b
Insulation resistance > 100 megohms
Method 101, Condition B:
48 hours
Shall be capable of mating and unmating
and meet contact resistance requirements
Contact Resistance
Contact Retention
Method 307:
At 5 amps
9 milliohms maximum
-
4 lb. minimum axial load
(after 10 insertion extraction cycles)
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
59
Double Density D - .075" Contact Spacing
2D
The Double Density D is a rectangular connector in
the popular D Subminiature shell configuration
featuring double the contact density in the same
insert area. The Double Density D connector can
positions are reversed; the flexible CentipinTM
Contacts are crimp removable type.
contacts are recessed in the insulator and the more
rugged CentisocketTM contacts are exposed. This
reversal of positions, and the chamfered-entry of the
The Double Density D connector is available in the
five popular shell and insert sizes accommodating up
to 100 contacts. These connectors mate exclusively
with other Double Density D connectors. A wide
range of accessories can be used, including junction
shells, potting cups, switching shells, guide pin
plates, and dust caps.
thus accommodate up to 100 contacts instead of 50. sockets, assures positive mating even under severe
misalignment conditions. The contacts are retained
This double contact density is achieved by using
field-proven, highly reliable CentipinTM/CentisocketTM
contacts on .075 (1.91) centers, in the positive con-
tact alignment design. In this design contact
in the monobloc insulator by a resilient internal
shoulder that snaps into a locking groove in the con-
tact. The chamfered front of the contact will not
damage the internal shoulder in the insulator.
1. STANDARD D HARDWARE-
Including full range of D-Subminiature accessories
2. ONE PIECE MONOBLOCK INSULATOR-
1
2
glass-filled nylon material
3. CONTACT RETENTION-
thermoplastic internal shoulder snaps into a locking groove in the contact.
Retention Force: 8 lbs. min. initially, 4 lbs. min. after 10 cycles.
3
4
4. TWIST PIN CONTACTS-
seven outer wiping surfaces assure electrical continuity even under severe
shock and vibration
5. POSTIVE CONTACT ALIGNMENT-
flexible pin is recessed in insulator cavity and rugged socket is exposed
6. GUIDE-IN KEYS AND KEYWAYS-
5
6
assure alignment during mating and prevent scooping
Specifications
WEIGHT
MATERIALS AND FINISHES
MECHANICAL FEATURES
*Shell
Steel, cadmium plated with yellow chro-
Sizes
- Five shell sizes: E, A, B, C, and D
-
Part Number
Weight (in gr.)
Weight (in oz.)
by shell size Less With Contacts Less With Contacts
mate supplementary coating
Coupling
- Friction or jackscrew
- Keystone-shaped shells
- .075 (1.91)
-
Mounting Hardware Stainless steel
2DE19P
2DE19S
2DA31P
2DA31S
2DB52P
2DB52S
2DC79P
2DC79S
2DD100P
2DD100S
4.05
3.75
5.02
5.17
.142
.133
.183
.173
.308
.252
.413
.342
.453
.386
.177
.182
.239
.255
.402
.390
.555
.551
.633
.651
Polarization
Contact Spacing
and Float Mounts
-
Insulator
Glass-filled nylon
5.20
6.78
Contact Termination - Crimp snap-in
-
-
Contacts
Copper alloy, gold plate
A106 Gold over brass
A156 Gold over brass
A197 Tin/Lead over steel
4.90
7.22
Alternate finish,
Modification Code
8.75
11.40
11.05
15.73
15.62
17.95
18.45
7.15
11.70
9.70
*Brass non-magnetic also available
12.85
10.95
How to Order
2D
2D
E
A
19
31
S
P
* * * *
BR
F
R
RoHS COMPLIANCE
SERIES
SHELL SIZE
FLOAT MOUNTS
CONTACT ARRANGEMENT
CONTACT TYPE
TERMINATION
MODIFICATION
NOTE: Connectors may be ordered less contacts by adding the mod callout "FO" at end of number.
Contacts are then supplied in bulk form.
SERIES
2D - Double Density D
CONTACT ARRANGEMENT
19, 31, 52, 79 and 100
TERMINATION
BR - 90˚ right angle PCB mounting
(For BR Series use "P" to designate jackpost)
CONTACT TYPE*
P - Pin
SHELL SIZE
E, A, B, C and D
MODIFICATION
F171 - Jackpost assembly
F172 - Standard jackscrew
F173 - Low profile jackscrew
For other modifications consult factory
Dimensions shown in inch (mm)
S - Socket
FLOAT MOUNTS
Omit if not required
* Accommodates AWG #26 thru #22
Specifications and dimensions subject to change
www.ittcannon.com
60
Double Density D - .075" Contact Spacing
2D
Standard Shell
M
A
L
J
K
B
1ꢀ˚ (TYP)
G
+
+
D
E
+
+
H
C
V
TWO MTG. HOLES
.123 .ꢀꢀ5
(3.12 ꢀ.13)
T
T
T
+ .020 (0.51)
- .000 (0.00)
+ .020 (0.51)
- .000 (0.00)
Part Number
by Shell Size
Part Number
by Shell Size
2DE19P
2DE19S
2DA31P
2DA31S
2DB52P
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.236 (5.99)
2DB52S
2DC79P
2DC79S
2DD100P
2DD100S
.236 (5.99)
.236 (5.99)
.236 (5.99)
.236 (5.99)
.236 (5.99)
.856(21.74)MAX.
Float Mount
A
B
K
G
J
N
10˚ (TYPꢂ
+
+
H
+
+
E
D
.03ꢀ (.81ꢀꢂ
TOTAL
DIAMETRAL
FLOAT
M
TWO MTG. HOLES
.0885 .00ꢀ5
C
V
(ꢀ.ꢀ48 0.0ꢁ4ꢂ
Part Number
A
B
C
D
E
G
H
J
K
L
M
N
V
by Shell Size .015 (0.38)
.010 (0.25) .010 (0.25) .010 (0.25) .015 (0.38) .010 (0.25) .010 (0.25) .010 (0.25) .010 (0.25) .010 (0.25) .010 (0.25) .010 (0.25)
Max.
2DE19P
2DE19S
2DA31P
2DA31S
2DB52P
2DB52S
2DC79P
2DC79S
1.213 (30.81) .697 (17.70) .984 (24.99) .360 (9.14) .494 (12.55) .759 (19.28) .422 (10.72) .036 (.914) .236 (5.99) .055 (1.40) .422 (10.72) .120 (3.05) .555 (14.10)
1.213 (30.81) .640 (16.26) .984 (24.99) .308 (7.82) .494 (12.55) .759 (19.28) .422 (10.72) .032 (213)
1.541 (39.14) 1.025 (26.03) 1.312 (33.32) .360 (9.14) .494 (12.55) 1.083 (27.51) .422 (10.72) .036 (.914)
1.541 (39.14) .968 (24.58) 1.312 (33.32) .308 (7.82) .494 (12.55) 1.083 (27.51) .422 (10.72) .032 (213)
2.088 (53.03) 1.583 (40.21) 1.852 (47.04) .378 (9.60) .494 (12.55) 1.625 (41.27) .422 (10.72) .036 (.914)
2.088 (53.03) 1.508 (38.30) 1.852 (47.04) .308 (7.82) .494 (12.55) 1.625 (41.27) .422 (10.72) .032 (213)
2.729 (69.31) 2.231 (56.67) 2.500 (63.50) .378 (9.60) .494 (12.55) 2.272 (57.71) .422 (10.72) .036 (.914)
2.729 (69.31) 2.156 (54.76) 2.500 (63.50) .308 (7.82) .494 (12.55) 2.272 (57.71) .422 (10.72) .032 (213)
.243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10)
.236 (5.99) .055 (1.40) .422 (10.72) .120 (3.05) .555 (14.10)
.243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10)
.231 (5.87) .055 (1.40) .426 (10.82) .129 (3.28) .555 (14.10)
.243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10)
.231 (5.87) .055 (1.40) .426 (10.82) .129 (3.28) .555 (14.10)
.243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10)
.231 (5.87) .055 (1.40) .426 (10.82) .129 (3.28) .555 (14.10)
.243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10)
2DD100P 2.635 (66.92) 2.127 (54.02) 2.406 (61.11) .484 (12.29) .605 (15.37) 2.178 (55.32) .534 (13.56) .036 (.914)
2DD100S 2.635 (66.92) 2.062 (52.37) 2.406 (61.11) .420 (10.67) .605 (15.37) 2.178 (55.32) .534 (13.56) .032 (213)
For shell with float mounts, add letter F after shell size, e.g., 2DEF19P.
Jackscrew/Jackpost Assembly
#4-40 UNC-2B
THREAD
.ꢀ80 .025 ꢁGri
(4.57 0.64) ꢂLengt
#4-40 UNC-2A THREAD
#4-40 UNC-2A THREAD
.025 (0.64)
MAX.
.025 (0.64)
MAX.
.233 (5.92)
.223 (5.66)
.ꢀ80 .025 ꢁGri
(4.57 0.64) ꢂLengt
.620 .0ꢀ0
(ꢀ5.75 0.25)
.230 (5.84) MAX.
.325 .0ꢀ5
(8.26 0.38)
#4-40 UNC-2A THREAD
Standard (F172) Jackscrew
(factory installed)
Low Profile (F173) Jackscrew
(factory installed)
Jackpost (F171)
Front Panel Connector Mounting Only
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
61
Double Density D - .075" Contact Spacing
2D
Contact Arrangements
All views are pin front face. Use reverse order for socket side.
1
7
6
1
10
21
31
1
17
35
52
13
19
11
22
18
36
14
DE
DA
DB
52 Contacts
19 Contacts
31 Contacts
1
26
27
52
76
51
75
1
26
53
79
27
54
100
DC
79 Contacts
DD
100 Contacts
Cavity identification numbers are shown for reference only and do not appear on insulator front face. However they do appear on rear of insulator.
90˚ PCB Mounting - 3 Row
.0375
(0.95)
REF.
.148
(3.76)
MIN.
.075
(.190)
REF.
.125 (3.18)
.115 (2.92)
DIA. TYP.
.130 (3.30)
.100 (2.54)
2x
.690
(17.53)
MAX.
.253 (6.43)
.233 (5.92)
.100
(2.54)
REF.
.100
(2.54)
REF.
.510 (12.95)
.490 (12.45)
B
B
CAV. #1
.065 (1.65)
.075 (1.90)
.510 (12.95)
.480 (12.18)
#4-40
UNC-2B THREAD
(2 PLACES)
LAST CAV.
A
A
PCB Termination Leads
(all contact arrangements)
.024 (6.10) to .028 (7.11).
LAST
LEAD
Suggested finished PC hole
Size .033 (8.38) +_ .003 (0.08)
LEAD #1
Part Number
by Shell Size
A
B
C
Max.
.015 (0.38)
1.215 (30.86)
1.540 (39.12)
2.090 (53.09)
2.730 (69.34)
.010 (0.25)
2DE19SBRP
2DA31SBRP
2DB52SBRP
2DC79SBRP
.984 (24.99)
1.312 (33.32)
1.852 (47.04)
2.500 (63.50)
.690 (17.53)
.690 (17.53)
.690 (17.53)
.690 (17.53)
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
62
Double Density D - .075" Contact Spacing
2D
90˚ PCB Mounting - 4 Row
.0375 (0.94) REF.
.125 (3.18)
.115 (2.92)
.075 (1.90) REF.
.130
(3.30)
MIN.
DIA. TYP.
+
+ +
+
+
+
+
+
+
+
+
+
+ + +
+ +
+
+
+
+
+
+
+ + +
+
+
+
+
+
+
+ + +
+
+
+
+
+
+
+
+
+
+ +
+
+
+
+
.790
(20.07)
MAX.
+
+
+ + + +
+ + + + + +
+
+
+
+
+
+
+
+
+
.100
(2.54)
REF.
.200
(5.08)
REF.
.100
(2.54)
REF.
.253 (6.43)
.233 (5.92)
.510 (12.95)
.490 (12.45)
B
B
.075 (1.90)
CAV #1
.065 (1.65)
.620 (15.75)
.590 (14.99)
+
+
#4-40
UNC-2B THREAD
(2 PLACES)
CAV #100
A
A
LEAD
#100
LEAD
#1
Part Number
by Shell Size
A
B
C
+_ .015 (0.38)
2.635 (66.93)
+_ .010 (0.25)
2.406 (61.11)
Max.
2DD100SBRP
.790 (20.07)
Contact Arrangements - Page 62
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
63
Double Density D - .075" Contact Spacing
2D
Panel Cutouts
A
10˚0' TYP.
B
G
F
E
H
FULL R
K TYP R
.032 (0.81) R MAX. TYP
D
C
G
D
C
Mtg.
Conn. Method
A
B
C
D
E
F
G
H
K
+_ .005 (0.13) +_ .005 (0.13)
+_ .005 (0.13) +_ .005 (0.13)
+_ .005 (0.13)
+_ .005 (0.13)
.257 (6.53)
.225 (5.71)
.257 (6.53)
.225 (5.71)
.257 (6.53)
.225 (5.71)
.257 (6.53)
.225 (5.71)
.312 (7.92)
.278 (7.06)
+_ .002 (0.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
+_ .002 (0.05)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
+_ .002 (0.05)
.083 (2.11)
.132 (3.35)
.083 (2.11)
.132 (3.35)
.083 (2.11)
.132 (3.35)
.083 (2.11)
.132 (3.35)
.083 (2.11)
.132 (3.35)
2DE
2DA
2DB
2DC
2DD
Front
Rear
Front
Rear
Front
Rear
Front
Rear
Front
Rear
.874 (22.20)
.806 (20.47)
1.202 (30.53)
1.134 (28.80)
1.743 (44.27)
1.674 (42.52)
.437 (11.10)
.403 (10.24)
.601 (15.26)
.567 (14.40)
.872 (22.15)
.837 (21.26)
.984 (24.99)
.984 (24.99)
1.312 (33.32)
1.312 (33.32)
1.852 (47.04)
1.852 (47.04)
.492 (12.50)
.492 (12.50)
.656 (16.66)
.656 (16.66)
.926 (23.52)
.926 (23.52)
.513 (13.03)
.449 (11.40)
.513 (13.03)
.449 (11.40)
.513 (13.03)
.449 (11.40)
.513 (13.03)
.449 (11.40)
.623 (15.82)
.555 (14.10)
2.391 (60.73) 1.196 (30.38)
2.326 (59.08) 1.163 (29.54)
2.297 (58.34) 1.149 (29.18)
2.218 (56.34) 1.109 (28.17)
2.500 (63.50) 1.250 (31.75)
2.500 (63.50) 1.250 (31.75)
2.406 (61.11) 1.203 (30.56)
2.406 (61.11) 1.203 (30.56)
For contact part numbers, termination tooling and assembly see pages 67-69.
Panel Mounting
3/32 THICKNESS (REF.)
RECOMMENDED
RIVET THICKNESS
Front Mounting
Standard
Front Mounting
Float
RIVET THICKNESS
Rear Mounting
Rear Mounting
Float
Standard
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
64
Centi-D Loc-.075" Contact Spacing
CDL
A subminiature all plastic high density "D" rectan-
gular connector. The CDL is
a general purpose
connector with a peripheral o-ring and wire sealing
gasket. Connector utilizes rear insertion, front re-
lease, crimp snap-in size 22, centi-loc contacts
installable by the custormer or, if preferred, by the
factory.
MATERIAL
Insulator:
Black Nylon
Dielectric Gasket:
Contact:
Polychloroprene
Copper Alloy, Gold Plated
Silicone
Seal Ring
How to Order
CDL 2A - 139 P - * - F0
R
SERIES
CONTACT ARRANGEMENT
139
RoHS
COMPLIANCE
Centi-D Loc Series
(Consult customer service for other sizes)
SERIES
TYPE
TYPE
CONTACT STYLE
P - Centi-loc pin
2
- No lock (mtg. holes)
2A - No lock type with rear gasket
S - Centi-loc socket
CONTACT ARRANGEMENT
MODIFICATION CODES
CONTACT STYLE
F0 - Less contacts
MODIFICATION CODES
Plug
.560 (14.22)
MAX.
2.625 (66.68)
2.344 (59.54)
.005 (0.13)
CAVITY #1
CAVITY #1
.625 (15.88)
.010 (0.25)
.625 (15.88)
.010 (0.25)
CONTACT
CONTACT
HEIGHT
.065 (1.65)
.045 (1.14)
HEIGHT
.035 (0.89)
.015 (0.38)
SILICONE
SEAL RING
.260 (6.60)
.010 (0.25)
.175 (4.44) MAX.
.540 (13.72)
MAX.
.535
(13.59)
MAX.
2.025 (51.44) MAX.
2.025 (51.44)
MAX.
.150 (3.81)
.010 (0.25)
.150 (3.81)
.010 (0.25)
Plug
Receptacle
Recommended Panel Cutouts
.125 (3.18)
DIA. TYP.
.2035 (51.69)
.016 (0.41)
.063 (1.60)
RAD. MAX.
.565 (14.35)
.005 (0.13)
2.344 (59.54)
.005 (0.13)
Contact Arrangements
Engaging Face View
CAVITY #1
CAVITY #1
CAVITY #70
CAVITY #70
CAVITY #92
CAVITY #92
CAVITY #117
CAVITY #117
CAVITY #139
CAVITY #139
Plug
Receptacle
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
65
Strip Connectors - .100"/.075" Contact Spacing
CTA
CENTI-LOC connectors are low-cost nylon
strip connectors designed for commercial
applications such as instrumentation, commu-
nications, and medical equipment. They are
available in continuous strip form up to a max-
imum length of 6 inches (152.40mm), accom-
modating from 1 to 60 rear insertion, front
release, crimp snap-in size 22 CENTIPINTM/
CENTISOCKETTM contacts. These contacts
utilize a proven positive contact alignment
design, giving additional contact strength and
positive contact alignment during mating.
These connectors can be ordered in kit or bulk
form. The kit comprises all the parts necessary
to assemble one complete 6-inch (152.40) strip
connector with 60 contacts on .100 (2.54) cen-
ters or a 4-inch (101.60mm) strip with 53 con-
tacts on .075 (1.91) centers. If more then one
connector is required, the parts can be ordered
in bulk and assembled as desired.
Components and Accessories
The CENTI-LOC strip connector can be ordered in
kit or bulk form. The kit includes matin g insulators
with a full compliment of contacts and two guide
posts. If more than one connector is required, the
parts can be ordered in bulk and assembled as
desired.
Kit Form
Insulator
Kits include mating insulators with full
complement of contacts and two guide posts.
.475 (12.06)
MAX.
.275 (6.98)
MAX.
Part
Number
Contact
Center spacing
Guide Posts
Polarizing Posts
CTA3-KIT
CTA4-KIT
CTA3-CTA4-KIT
.075 (1.91)
.100 (2.54)
.075 (1.91) & .100 (2.54)
The guide posts and polarizing posts are inserted in the same manner as the contacts. The guide
posts are inserted into the socket insulator and the polarizing posts are inserted into the pin
insulator. The corresponding contact in the mating insulator must be removed for each.
See assembly instructions.
Contact
Center
Part
Number
Spacing
Type
Pin
Socket
Pin
Material
Nylon
Nylon
Nylon
Nylon
Insulator
CTA3-IP-53
CTA3-IS-53
CTA4-IP-60
CTA4-IS-60
CTA-GP
.075 (1.91)
.075 (1.91)
.100 (2.54)
.100 (2.54)
Socket
Guide Post
Polarizing Post
Passivated Stainless Steel
Passivated Stainless Steel
P/N 230-9507-000
P/N 230-9506-000
CTA-PP
Dimensional Data
4.031 (102.39)
MAX.
6.031 (153.19)
MAX.
.040 (1.02) MIN.
.040 (1.02) MIN.
.075 (1.91)
TYP.
.100 (2.54)
TYP.
.115 (2.92)
MAX.
.115 (2.92)
MAX.
CTA3-.075(1.91) Centers
CTA4-.100(2.54) Centers
Weights
Part
Number
No. of
Contacts
Contacts
Type
Avy. Weight
oz.
5%
gm.
pin
socket
pin
.185
.203
.230
.241
5.25
5.75
6.30
6.90
CTA3
CTA4
53
60
socket
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
66
The Centi Line - .075" Contact Spacing
2D/CTA
Contacts
Contact Part Number
Part Number
Pin
Socket
Type
Pin
Socket
031-9540-000
031-9540-004
031-9540-005
030-9542-001 Standard 30µin. plating
030-9542-002 50µ in. plating
A resilient internal shoulder retains the contacts in the
insulator housing. The front of the contact is chamfered
to prevent damage to the internal shoulder as the
contact is pushed into position.
030-9542-004
With inspection hole;
50µ in. plating
N/A
030-9542-011 P.C. tail
.026 dia. x .083 lg. Soc.
030-9542-012 P.C. tail
*031-9540-013
.183 lg. Soc.
.020 dia. x
.183 lg. Pin
P.C. Tail Contacts
031-9540-016
030-9542-014 Long crimp
barrel **
Subtract .064 (1.63) +_ .010 (.25) from pigtail
length when used in 2D pin insulator for potting
well of connector assembly.
031-9540-022
030-9556-000 Small crimp bore
***
***
For AWG #32 & 30
Subtract .081 (2.08) +_ .010 (.25) from pigtail
length when used in 2D socket insulator for
potting well of connector assembly.
031-9540-007
*031-9540-015
030-9542-022 Small crimp bore
For AWG #28 & 30
030-9542-015 P.C. tail
.232 lg. Soc.
.020 dia. x
.255 lg. Pin
*031-9540-019
030-9542-016 P.C. tail
.444 lg. Soc.
.018 dia. x
.445 lg. Pin
50µ in. plating
NOTE: Plating, except as noted, is 30 micro-inch gold.
* Consult factory for any tail size or plating requirements.
** Special crimp locator required. Part number: 995-0001-714. (L3198-CL-PSL)
*** Use special insertion tip (323-9510-016 &-017).
2D and Centi-Loc Crimp and Assembly Tools
Tool
Locators
Pin
Socket
Description
Part Number
M22520/2-01
995-0001-584
L3198-CLP
L3198-CLS
995-0001-338
995-0001-353
M22520/2-01
Insertion Tools For Standard Contact
AWG
Size*
Kit Part Number
(handle and tip)
Tip
Handle
Part Number**
Part Number**
22
CIT-PS-CTA-22
CIT-PS-CTA-24
CIT-PS-CTA-26
CIT-PS-CTA-28
CIT-PS-CTA-30
323-9510-001
323-9510-002
323-9510-003
323-9510-004
323-9510-005
204-9500-000
204-9500-000
204-9500-000
204-9500-000
204-9500-000
24
26
CIET-CTA
Handle
Insertion Tips
28
30/P.C. Tail
* Based on wire size per MIL-W-16878 with Type E insulation, use smaller tool for wire with thin
insulation, larger tool for wire having thick insulation.
** The 5 insertion tips (part numbers 323-9510-001 thru - 005). plus handle, and the pin and socket
extaction tips maybe ordered as a SINGLE KIT by specifying the part number CIET-CTA-2.
[Part number: 070143-0002].
Insertion Tools For Long Crimp barrel Contacts
AWG
Size*
Tip Part Number ***
Pin Contact
Tip Part Number ***
Socket Contact
Handle
Part Number***
22
24
26
323-9510-008
323-9510-009
323-9510-010
323-9510-012
323-9510-013
323-9510-014
204-9500-000
204-9500-000
204-9500-000
CTA-AB
Assembly Holding
Block
*** To order the SINGLE KIT for the long crimp barrel contact (tip part numbers 323-9510-008 thru
-014, handle and pin and socket extraction tips) please specify CIET-CTA-3.
Part Number: 328-9508-000
Extraction Tools
Kit Part Number
(handle and tip)
Tip Part
Number
Handle Part
Number
Contact
CENTIPIN
Description
CET-P-CTA-2
CET-S-CTA-1
Socket Extraction
Pin Extraction
Tip
070112-0002
070113-0001
324-9502-000
324-9501-000
204-9500-000
204-9500-000
Tip
CENTISOCKET
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
67
The Centi Line - .075" Contact Spacing
2D/CTA
2D/CTA CENTI-LOCTM Connectors Assembly Instructions
The Double Density D/CTA CENTI-LOC Connectors
are highly reliable and simple connectors to use.
There are a few helpful suggestions that will assure
complete satisfaction when followed:
1. The following instructions should be followed.
2. The proper crimp tool and locator (if required)
must be used. These tools have been designed
for use with this product. Substitutions of crimp-
ing equipment may result in connector failure at
the assembly operation.
3. After crimping a contact to a lead it is of vital
importance that the proper tool be used to assure
seating the contact in the insulator in the proper
position. Any substitution of insertion tools may
result in over or under insertion of the contact
which may damage the retention system of the
insulator.
4. The female (socket) side of the connector has
been designed with a controlled float to allow for
ease of mating. To avoid reducing this float or
causing a splaying of the contacts, any unneces-
sary strain caused by clamping the leads too
close to the rear of the connector should be
avoided.
Use of recommended tooling together with proper
assembly techniques will pay dividends in reliability
and reduced costs.
2D Assembly Instructions
WIRE STRIPPING
CONTACT CRIMPING
.100
(2.54)
Using the proper crimp tool and locator, insert the
contact into the locator. Insert the stripped end of the
wire into the contact crimp pot, and crimp the contact to
the wire. Squeeze the handles firmly to insure a proper
crimp (tool will not release if crimping is incomplete).
NOTE: Contact stop must be changed in tool locator
when crimping pin and socket contacts.
Cut the wires to length required and strip .100" of
insulation from the end to be crimped. Check for
cut or broken wires and frayed insulation.
CONTACT INSERTION
2. Using a firm, steady pressure, push the contact into
the cavity until the resilient internal shoulder in the
insulator snaps into the locking groove in the contact.
The shoulder of the tool tip bottoms against the rear
of the insulator, preventing over-insertion. Repeat for
balance of contacts.
1. Place the proper insertion tip in the
insertion/-extraction handle and put the tip over the
wire as shown. The tool tip will butt up against the
crimp pot. Connector must be firmly supported
during both insertion and extraction operations.
CONTACT EXTRACTION
1. For contact extraction, remove the insertion tool
tip and replace it with the proper extraction tool tip.
(The socket tip will fit into the socket, and the pin
tip will slide over the pin bundle). Insert the tool tip
into the contact cavity: (the pin tip will butt up
against the shoulder of the pin contact, and the
socket tip will bottom out in the socket contact.)
2. Apply a firm, steady pressure until the contact is
released from the internal shoulder in the insulator. The
shoulder of the tool tip bottom against the insulator
face to prevent damage to the internal shoulder.
Remove the tool tip and pull the contact from the rear
of the connector. Repeat for the balance of contacts to
be removed.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
68
The Centi Line - .075" Contact Spacing
2D/CTA
CTA Assembly Instructions
INSERTION
2. Position the insertion tool tip on the rear of contact as
shown. The insulation must be pulled back from the crimp
pot approximately 1/32" to allow the tool tip to butt
against the contact crimp pot.
1. Place the connector into the slot in the assembly block
with the arrows on the insulator pointing downward. The
connector will bottom against the internal shoulder in the
groove in the assembly block. Start contact insertion by
placing the crimped contact in the cavity by hard.
.475 (12.06)
MAX.
.275 (6.98)
MAX.
Guide Posts
Polarizing Posts
4. The guide post and polarizing posts are inserted in teh
same manner as the contacts. The guide posts are inserted
into the socket insulator, and the polarizing posts are
inserted into the pin insulartor. The corresponding contact
in the mating insulator must be removed for each.
3. With firm steady pressure, push the contact into the
cavity until the resilient internal shoulder snaps into the
locking groove in the contact. To prevent over insertion,
the tool tip bottoms against the rear of the insulator.
EXTRACTION
2. The pin extraction tool tip is tubular, slides over the pin
bundle and butts against the front shoulder of the pin. The
socket extraction tool is a solid rod that fits into the socket
contact, the external shoulder butts against the contact
socket shoulder.
1. To extract the contacts, place the conector face up in
the assembly block so that the contact to be extracted is
in the end of the block that has a fully slotted opening.
3. Insert the extraction tool into the cavity and apply firm
pressure until the contact is pushed thru the rear of the
connector.
4. Lift the insulator from the groove and pull the contact
out. Repeat for balance of contacts to be removed.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
69
相关型号:
2DAF31SBRP
D Type Connector, 31 Contact(s), Female, 0.075 inch Pitch, Solder Terminal, #4-40, Plug
ITT
2DAF31SBRPFO
D Type Connector, 31 Contact(s), Female, 0.075 inch Pitch, Solder Terminal, #4-40, Plug
ITT
©2020 ICPDF网 联系我们和版权申明