F7071 [ITF]

SAW Bandpass Filter F7071; SAW带通滤波器F7071
F7071
型号: F7071
厂家: INTEGRATED TECHNOLOGY FUTURE    INTEGRATED TECHNOLOGY FUTURE
描述:

SAW Bandpass Filter F7071
SAW带通滤波器F7071

文件: 总7页 (文件大小:276K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SAW Bandpass Filter F7071  
Features  
RF bandpass filter  
Usable bandwidth 18 MHz  
High attenuation  
No matching 50single-ended operation  
Ceramic Surface Mounted Device Package (3.0 mm × 3.0 mm)  
RoHS compliant  
Package Dimensions  
1
2
3
6
5
4
6
5
4
1
2
3
I
7071  
Dimensions shown are nominal in millimeters  
Pin Configurations  
Body : Al2O3 Ceramic  
Lid : Kovar, Ni Plated  
Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um  
Ni Plating  
2
5
Input  
Output  
1, 3, 4, 6  
Case ground  
Maximum Ratings  
Parameters  
Unit  
°C  
Minimum  
Typical  
Maximum  
Operating Temperature Range  
Storage Temperature Range  
-40  
-40  
-
25  
-
85  
85  
20  
°C  
Power Handling Capability  
dBm  
-
Electrostatics Sensitive Device (ESD)  
Part No.  
F7071  
2010-04-27  
NCLD02-PS01  
I T F Co., Ltd.  
102-901, Bucheon Technopark 364,  
Samjeong-Dong, Ojeong-Gu, Bucheon-City,  
Gyounggi-Do, Korea 421-809  
Rev. Date  
Rev.  
1/7  
SAW Bandpass Filter F7071  
Specifications  
Fc = 707.0 MHz  
Minimum  
Typical  
707.0  
2.1  
Maximum  
Unit  
MHz  
dB  
Center Frequency ( Fc )  
-
-
-
-
-
Insertion Loss (In Fc +/- 9.0 MHz)  
Amplitude Ripple (In Fc +/- 9.0 MHz)  
VSWR (In Fc +/- 9.0 MHz)  
3.0  
1.5  
2.0  
0.5  
dB  
1.5  
Relative Attenuation  
10.0 MHz ~ 680.0 MHz  
745.0 MHz ~ 978.0 MHz  
978.0 MHz ~ 996.0 MHz  
996.0 MHz ~ 2700.0 MHz  
30  
30  
35  
25  
50  
42  
58  
30  
-
-
-
-
dB  
Temperature Range (Operational)  
Input/Output Impedance  
-40  
25  
50  
85  
Ohms  
Notes :  
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and  
full 2 port calibration.  
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing  
tolerances  
3) All attenuation measurements are measured relative to insertion loss  
Part No.  
Rev. Date  
Rev.  
F7071  
I T F Co., Ltd.  
102-901, Bucheon Technopark 364,  
Samjeong-Dong, Ojeong-Gu, Bucheon-City,  
Gyounggi-Do, Korea 421-809  
2010-04-27  
NCLD02-PS01  
2/7  
SAW Bandpass Filter F7071  
Matching Schematic  
( Actual matching values may vary due to PCB layout and parasitics )  
Input  
Output  
50  
50  
Ω
Ω
Marking Configuration  
1)  
I2)  
70713)  
1) Pad Number 1 Index  
2) Manufacturer name  
3) Marking Number  
* Ink or Laser Marking available  
Part No.  
Rev. Date  
Rev.  
F7071  
I T F Co., Ltd.  
102-901, Bucheon Technopark 364,  
Samjeong-Dong, Ojeong-Gu, Bucheon-City,  
Gyounggi-Do, Korea 421-809  
2010-04-27  
NCLD02-PS01  
3/7  
SAW Bandpass Filter F7071  
Typical Performance ( at 25)  
Part No.  
Rev. Date  
Rev.  
F7071  
I T F Co., Ltd.  
102-901, Bucheon Technopark 364,  
Samjeong-Dong, Ojeong-Gu, Bucheon-City,  
Gyounggi-Do, Korea 421-809  
2010-04-27  
NCLD02-PS01  
4/7  
SAW Bandpass Filter F7071  
Input / Output VSWR Charts  
Input / Output Smith Charts  
Part No.  
Rev. Date  
Rev.  
F7071  
I T F Co., Ltd.  
102-901, Bucheon Technopark 364,  
Samjeong-Dong, Ojeong-Gu, Bucheon-City,  
Gyounggi-Do, Korea 421-809  
2010-04-27  
NCLD02-PS01  
5/7  
SAW Bandpass Filter F7071  
Packing Specification  
1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel )  
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.  
TOP COVER TAPE  
REEL  
CARRIER TAPE  
Tape Specification  
1. Leader part and vacant position specification  
Vacant  
150mm min.  
Component  
contained  
Vacant  
150mm min.  
Leader part  
250mm min.  
END  
START  
Tape Running Direction  
2. Tensile strength of carrier tape  
4.4N/mm width  
Direction of pull  
Top cover tape  
3. Top cover tape adhesion  
1) pull off angle : 0~15°  
2) speed : 300mm/min  
3) force : 20~70g  
0~15 degree  
Carrier tape  
Part No.  
Rev. Date  
Rev.  
F7071  
2010-04-27  
NCLD02-PS01  
I T F Co., Ltd.  
102-901, Bucheon Technopark 364,  
Samjeong-Dong, Ojeong-Gu, Bucheon-City,  
Gyounggi-Do, Korea 421-809  
6/7  
SAW Bandpass Filter F7071  
Carrier Tape Dimensions [unit : mm]  
A
B
C
D
E
F
3.40 ± 0.1  
3.40 ± 0.1  
7.25 ± 0.1  
1.70 ± 0.1  
12.00 ± 0.1  
8.00 ± 0.1  
Part Direction  
Tape Running Direction  
Reel Dimensions [unit : mm]  
Part No.  
Rev. Date  
Rev.  
F7071  
2010-04-27  
NCLD02-PS01  
I T F Co., Ltd.  
102-901, Bucheon Technopark 364,  
Samjeong-Dong, Ojeong-Gu, Bucheon-City,  
Gyounggi-Do, Korea 421-809  
7/7  

相关型号:

F70M12A

Monolithic Crystal Filters
ECM

F70M12B

Monolithic Crystal Filters
ECM

F70M15A

Monolithic Crystal Filters
ECM

F70M15B

Monolithic Crystal Filters
ECM

F70M20A

Monolithic Crystal Filters
ECM

F70M20B

Monolithic Crystal Filters
ECM

F70M30A

Monolithic Crystal Filters
ECM

F70M30B

Monolithic Crystal Filters
ECM

F70M7.5A

Monolithic Crystal Filters
ECM

F70M7.5B

Monolithic Crystal Filters
ECM

F71585-000

Electric Fuse, Fast Blow, 3A, 32VDC, 35A (IR), Surface Mount, ROHS COMPLIANT
LITTELFUSE

F71610

USB CIR Chip for Vista (Receive Only)
FINTEK