F6751 [ITF]
SAW Bandpass Filter F6751; SAW带通滤波器F6751
| 型号： | F6751 |
| 厂家： | 
INTEGRATED TECHNOLOGY FUTURE |
| 描述： | SAW Bandpass Filter F6751 |
| 文件： | 总7页 (文件大小：156K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SAW Bandpass Filter F6751
Features
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
RF Bandpass Filter
High attenuation
No matching 50Ω single-ended operation
Ceramic Surface Mounted Device (SMD) Package ( 3.0 mm * 3.0 mm )
RoHS Compliant
Package Dimensions
1
2
3
6
5
4
6
5
4
1
2
3
I
6751
Pin Configuration
Dimensions shown are nominal in millimeters
2
5
Input
Body : Al2O3 Ceramic
Lid : Kovar, Ni Plated
Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um
Ni Plating
Output
1, 3, 4, 6
Case ground
Maximum Ratings
Parameter
Unit
℃
Minimum
Typical
Maximum
Operating Temperature Range
Storage Temperature Range
0
-30
-
25
25
-
50
85
10
℃
Power Handling Capability
dBm
Electrostatics Sensitive Device (ESD)
Part No.
Rev. Date
Rev.
F6751
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2012-08-30
NCNH02-AS01
1/7
SAW Bandpass Filter F6751
Specifications
Fc = 675 MHz
Minimum
Typical
675
Maximum
Unit
MHz
dB
Center Frequency ( Fc )
Insertion Loss (At Fc)
VSWR (At Fc)
-
-
-
-
1.6
2.2
2.0
1.3
Relative Attenuation
608 ~ 614 MHz
20
20
45
45
35
33
60
65
58
55
44
40
-
-
-
-
-
-
736 ~ 742 MHz
1283 ~ 1289 MHz
1411 ~ 1417 MHz
1958 ~ 1964 MHz
2086 ~ 2092 MHz
dB
Input/Output Impedance
50
Ohms
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
Part No.
Rev. Date
Rev.
F6751
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2012-08-30
NCNH02-AS01
2/7
SAW Bandpass Filter F6751
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
Input
Output
50
Ω
50Ω
Marking Configuration
1)
I 2)
6751 3)
1) Pad Number 1 Index
2) Manufacturer name
3) Marking Number
* Ink or Laser Marking available
Part No.
Rev. Date
Rev.
F6751
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2012-08-30
NCNH02-AS01
3/7
SAW Bandpass Filter F6751
Typical Performance ( at 25℃ )
Part No.
Rev. Date
Rev.
F6751
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2012-08-30
NCNH02-AS01
4/7
SAW Bandpass Filter F6751
Input / Output VSWR Charts
Input / Output Smith Charts
Part No.
Rev. Date
Rev.
F6751
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2012-08-30
NCNH02-AS01
5/7
SAW Bandpass Filter F6751
Packing Specification
1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel )
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant
150mm min.
Component
contained
Vacant
150mm min.
Leader part
250mm min.
END
START
Tape Running Direction
2. Tensile strength of carrier tape
4.4N/mm width
Direction of pull
Top cover tape
3. Top cover tape adhesion
1) pull off angle : 0~15°
2) speed : 300mm/min
3) force : 20~70g
0~ 15 degree
Carrier tape
Part No.
Rev. Date
Rev.
F6751
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2012-08-30
NCNH02-AS01
6/7
SAW Bandpass Filter F6751
Carrier Tape Dimensions [unit : mm]
A
B
C
D
E
F
3.40 ± 0.1
3.40 ± 0.1
7.25 ± 0.1
1.70 ± 0.1
12.00 ± 0.1
8.00 ± 0.1
Part Direction
Tape Running Direction
Reel Dimensions [unit : mm]
Part No.
Rev. Date
Rev.
F6751
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2012-08-30
NCNH02-AS01
7/7
相关型号：
©2020 ICPDF网 联系我们和版权申明