AHE2815D-SLVPBF [INFINEON]
DC-DC Regulated Power Supply Module, 2 Output, 15W, Hybrid, PLUG IN-10;
| 型号： | AHE2815D-SLVPBF |
| 厂家： | 
Infineon |
| 描述： | DC-DC Regulated Power Supply Module, 2 Output, 15W, Hybrid, PLUG IN-10 输出元件 |
| 文件： | 总10页 (文件大小：153K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PD-94555B
AHE28XXD SERIES
28V Input, Dual Output
HYBRID-HIGH RELIABILITY
DC/DC CONVERTER
Description
AHE
The AHE Series of DC/DC converters feature high
power density and an extended temperature range for
use in military and industrial applications. Designed to
MIL-STD-704D input requirements, these devices have Features
nominal 28VDC inputs with ±5V, ±12V and ±15V dual
n
n
n
17V to 40VDC Input Range
28VDC Nominal Input
± 5V, ±12V and ±15V Outputs Available
outputs to satisfy a wide range of requirements. The
circuit design incorporates a pulse width modulated
push-pull topology operating in the feed-forward mode
at a nominal switching frequency of 250KHz. Input to n Indefinite Short Circuit and Overload
output isolation is achieved through the use of
transformers in the forward and feedback circuits.
Protection
n
n
n
12.9W/in3 Power Density
15W Output Power
Fast Loop Response for Superior Transient
Characteristics
Operating Temperature Range from -55°C to
+125°C Available
Popular Industry Standard Pin-Out
Resistance Seam Welded Case for Superior
Long Term Hermeticity
Efficiencies up to 82%
Shutdown from External Signal
Military Screening
The advanced feedback design provides fast loop
response for superior line and load transient characteristics
and offers greater reliability and radiation tolerance
than devices incorporating optical feedback circuits.
n
n
n
Manufactured in a facility fully qualified to MIL-PRF-
38534, these converters are fabricated utilizing DSCC
qualified processes. For available screening options,
refer to device screening table in the data sheet.
Variations in electrical, mechanical and screening can
be accommodated. Contact IR Santa Clara for special
requirements.
n
n
n
n
314,000 hour MTBF at 85°C (AUC)
n Standard Microcircuit Drawings Available
www.irf.com
1
01/08/07
AHE28XXD Series
Specifications
AHE2805D
Absolute Maximum Ratings
Input voltage
-0.5V to +50VDC
300°C for 10 seconds
-55°C to +125°C
-65°C to +135°C
Soldering temperature
Operating case temperature
Storage case temperature
Table I. Electrical Performance Characteristics
Test
Symbol
Conditions
Group A
Subgroups
Device
Types
Limits
Unit
≤
≤
-55°C Tc +125°C
Vin = 28 Vdc ±5%, CL = 0
Unless otherwise specified
Min
Max
Output voltage
VOUT
IOUT
VRIP
IOUT = 0
1
2,3
1,2,3
All
V
±4.95
±4.90
0.0
±5.05
±5.10
±625
Output current 9, 11
VIN = 17, 28, and 40 V dc
All
All
mA
Output ripple voltage 8, 9
VIN = 17, 28, and 40 V dc,
B.W. = DC to 2MHz
VIN =17,28, and 40 V dc
1,2,3
60
mVp-p
Output power 4,
9, 11
POUT
VRLINE
1,2,3
1
All
All
15
W
mV
Line 9
VIN = 17, 28, and 40 V dc,
25
Regulation 10
Load
I
out = 0, ±313, and ±625mA
2,3
1,2,3
50
110
VRLOAD
VIN = 17, 28, and 40 V dc,
All
All
mV
mA
Regulation 9
I
OUT = 0, ±313,and ±625
mA
Input current
IIN
IOUT = 0, inhibit (pin 2)
tied to input return (pin 10)
IOUT = 0,
1,2,3
18
40
50
inhibit (pin 2) = open
Input ripple current 8
IRIP
1,2,3
All
mAp-p
I
OUT = ±625mA
B.W. = DC to 2MHz
Efficiency
Isolation
EFF
1
1
All
All
80
%
I
OUT = ±625mA
TC = +25°C
ISO
Input to output or any pin
to case (except pin 8)
at 500V dc Tc = +25ºC
No effect on dc
100
MΩ
Capacitive load 6, 12
CL
PD
FS
4
1
All
All
01
200
6.0
µF
W
performance,
Tc = +25ºC
Overload, TC = +25 C
3
Power dissipation
load fault
°
1
6.0
275
Short circuit, TC = +25°C
IOUT = ±625mA
Switching frequency 9
4,5,6
225
KHz
02
03
All
225
250
-300
245
275
+300
Output response to step
transient load changes 7
VOTLOAD
50% load to/from100%load
No load to/from 50% load
4
5,6
4
5,6
-450
-500
-750
+450
+500
+750
mVpk
All
For Notes to Specifications, refer to page 3
2
www.irf.com
AHE28XXD Series
AHE2805D
Table I. Electrical Performance Characteristics - continued
Test
Symbol
Conditions
Group A
Subgroups
Device
Types
Limits
Unit
≤
≤
-55° Tc +125°C
Vin = 28 Vdc ±5%, CL= 0
unless otherwise
specified
Min
Max
70
Recovery time step
transient load
TTLOAD
50% load to/from 100%
load
4
All
changes 1, 7
µs
5,6
100
No load to 50% load
50% load to no load
Input step 17 to 40V dc
4,5,6
4,5,6
4,5,6
All
All
All
1500
5.0
1200
ms
mVpk
Output response
transient step line
changes 5, 12
VOTLINE
Input step 40 to 17V dc
Input step 17 to 40V dc
4,5,6
4,5,6
All
All
-1500
4.0
Recovery time
transient step
TTLINE
ms
line changes1, 5, 12
Input step 40 to 17V dc
4,5,6
4,5,6
4,5,6
All
All
All
4.0
600
10
Turn on overshoot 9
Turn on delay 2, 9
VTonOS
TonD
mVpk
ms
I
OUT = 0 and ±625mA
±
IOUT = 0 and 625mA
Load fault recovery 12
TrLF
4,5,6
All
10
ms
Notes to Specifications
1
Recovery time is measured from the initiation of the transient to where VOUT has returned to within ±0.1 % of VOUT at 50 % load.
2
Turn on delay time measurement is for either a step application of power at the input or the removal of a ground signal from the
inhibit pin (pin 2) while power is applied to the input.
3
An overload is that condition with a load in excess of the rated load but less than that necessary to trigger the short circuit
protection and is the condition of maximum power dissipation.
4
5
6
Total power at both outputs. For operation at 16V dc input, derate output power by 33 %.
Input step transition time between 2.0µs and 10µs.
Capacitive load may be any value from 0 to the maximum limit without compromising dc performance. A capacitive load in excess
of the maximum limit will not disturb loop stability but may interfere with the operation of the load fault detection circuitry,
appearing as a short circuit during turn-on.
7
8
9
Load step transition time between 2.0µs and 10µs.
Bandwidth guaranteed by design. Tested for 20KHz to 2.0MHz.
Tested at each output.
10 When operating with unbalanced loads, at least 25 % of the load must be on the positive output to maintain regulation.
11 Parameter guaranteed by line and load regulation tests.
12 Parameter shall be tested as part of design characterization and after design or process changes. Thereafter parameters shall be
guaranteed to the limits specified in Table I.
www.irf.com
3
AHE28XXD Series
Specifications
AHE2812D
Absolute Maximum Ratings
Input voltage
-0.5V to +50VDC
300°C for 10 seconds
-55°C to +125°C
-65°C to +135°C
Soldering temperature
Operating case temperature
Storage case temperature
Table II. Electrical Performance Characteristics
Test
Symbol
Conditions
-55°C ≤ Tc ≤+125°C
Group A
Subgroups
Device
Types
Limits
Unit
Vin = 28 Vdc ±5%, CL = 0
Unless otherwise specified
Min
Max
Output voltage
VOUT
IOUT
VRIP
IOUT = 0
1
2,3
1,2,3
All
V
±
±
±
±
11.88
11.70
0.0
12.12
12.24
Output current 9, 11
VIN = 17, 28, and 40 V dc
All
All
mA
±625
Output ripple voltage 8, 9
VIN = 17, 28, and 40 V dc,
B.W. = DC to 2MHz
VIN =17,28, and 40 V dc
VIN = 17, 28, and 40 V dc,
Iout = 0, 313, and 625mA
1,2,3
60
mVp-p
Output power 4,
9, 11
POUT
VRLINE
1,2,3
1
All
All
15
W
mV
Line 9
30
Regulation 10
Load
±
±
2,3
1,2,3
60
120
VRLOAD
VIN = 17, 28, and 40 V dc,
IOUT = 0, ±313,and ±625
mA
IOUT = 0, inhibit (pin 2)
tied to input return (pin 10)
IOUT = 0,
inhibit (pin 2) = open
IOUT = ±625mA
B.W. = DC to 2MHz
All
All
mV
mA
Regulation 9
Input current
IIN
1,2,3
18
40
50
Input ripple current 8
IRIP
1,2,3
All
mAp-p
%
Efficiency
Isolation
EFF
1
1
All
All
80
±
= 625mA
C = +25 C
IOUT
T
°
ISO
Input to output or any pin
to case (except pin 8)
at 500V dc Tc = +25ºC
No effect on dc
performance,
Tc = +25ºC
100
Ω
M
Capacitive load 6, 12
CL
PD
FS
4
All
All
01
200
6.0
µF
3
Power dissipation
load fault
1
W
°
Overload, TC = +25 C
1
4,5,6
6.0
275
°
Short circuit, TC = +25 C
Switching frequency 9
225
KHz
±
= 625mA
IOUT
02
03
All
225
250
-300
245
275
+300
Output response to step
transient load changes 7
VOTLOAD
50% load to/from100%load
No load to/from 50% load
4
5,6
4
5,6
-450
-500
-750
+450
+500
+750
mVpk
All
4
www.irf.com
AHE28XXD Series
AHE2812D
Table II. Electrical Performance Characteristics - continued
Test
Symbol
Conditions
Group A
Subgroups
Device
Types
Limits
Unit
≤
≤
-55° Tc +125°C
Vin = 28 Vdc ±5%, CL= 0
unless otherwise
specified
Min
Max
70
Recovery time step
transient load
TTLOAD
50% load to/from 100%
load
4
All
changes 1, 7
µs
5,6
100
No load to 50% load
50% load to no load
Input step 17 to 40V dc
4,5,6
4,5,6
4,5,6
All
All
All
1500
5.0
1200
ms
mVpk
Output response
transient step line
changes 5, 12
VOTLINE
Input step 40 to 17V dc
Input step 17 to 40V dc
4,5,6
4,5,6
All
All
-1500
4.0
Recovery time
transient step
TTLINE
ms
line changes1, 5, 12
Input step 40 to 17V dc
4,5,6
4,5,6
4,5,6
All
All
All
4.0
600
10
Turn on overshoot 9
Turn on delay 2, 9
VTonOS
TonD
mVpk
ms
I
OUT = 0 and ±625mA
±
IOUT = 0 and 625mA
Load fault recovery 12
TrLF
4,5,6
All
10
ms
Notes to Specifications
1
2
Recovery time is measured from the initiation of the transient to where VOUT has returned to within ±0.1% of VOUT at 50 % load.
Turn on delay time measurement is for either a step application of power at the input or the removal of a ground signal from the
inhibit pin (pin 2) while power is applied to the input.
3
An overload is that condition with a load in excess of the rated load but less than that necessary to trigger the short circuit
protection and is the condition of maximum power dissipation.
4
5
6
Total power at both outputs. For operation at 16V dc input, derate output power by 33 %.
Input step transition time between 2.0µs and 10µs.
Capacitive load may be any value from 0 to the maximum limit without compromising dc performance. A capacitive load in excess
of the maximum limit will not disturb loop stability but may interfere with the operation of the load fault detection circuitry,
appearing as a short circuit during turn-on.
7
8
9
Load step transition time between 2.0µs and 10µs.
Bandwidth guaranteed by design. Tested for 20KHz to 2.0MHz.
Tested at each output.
10 When operating with unbalanced loads, at least 25 % of the load must be on the positive output to maintain regulation.
11 Parameter guaranteed by line and load regulation tests.
12 Parameter shall be tested as part of design characterization and after design or process changes. Thereafter parameters shall be
guaranteed to the limits specified in Table II.
www.irf.com
5
AHE28XXD Series
Specifications
AHE2815D
Absolute Maximum Ratings
Input voltage
-0.5V to +50VDC
300°C for 10 seconds
-55°C to +125°C
-65°C to +135°C
Soldering temperature
Operating case temperature
Storage case temperature
Table III. Electrical Performance Characteristics
Test
Symbol
Conditions
Group A
Subgroups
Device
Types
Limits
Unit
≤
≤
-55°C Tc +125°C
Vin = 28 Vdc ±5%, CL = 0
Unless otherwise specified
Min
Max
Output voltage
VOUT
IOUT
IOUT = 0
1
2,3
1,2,3
All
All
V
±14.85 ±15.15
±14.70 ±15.30
Output current 9, 11
VIN = 17, 28, and 40 V dc
0.0
mA
±500
Output ripple voltage
VRIP
VIN = 17, 28, and 40 V dc,
B.W. = dc to 2 mHz
VIN =17,28, and 40 V dc
VIN = 17, 28, and 40 V dc,
Iout = 0, ±250, and ±500mA
1,2,3
All
60
mVp-p
8, 9
Output power 4, 9, 11
Line
POUT
VRLINE
1,2,3
1
All
All
15
W
mV
35
Regulation 9, 10
2,3
75
Load
VRLOAD
VIN = 17, 28, and 40 V dc,
IOUT = 0, ±250,and ±625
mA
IOUT = 0, inhibit (pin 2)
tied to input return (pin 10)
IOUT = 0,
1,2,3
All
All
150
mV
mA
Regulation 9
Input current
IIN
1,2,3
18
40
50
inhibit (pin 2) = open
Input ripple current 8
IRIP
1,2,3
All
mAp-p
%
±
= 500mA
IOUT
B.W. = DC to 2MHz
Efficiency
Isolation
EFF
1
1
All
All
80
IOUT = ±500mA
°
TC = +25 C
ISO
Input to output or any pin
to case (except pin 8)
at 500V dc Tc = +25°C
No effect on dc
100
Ω
M
Capacitive load 6, 12
CL
PD
FS
4
1
All
All
200
6.0
µF
W
performance, Tc = +25°C
3
Power dissipation
load fault
°
Overload, TC = +25 C
Switching frequency 9
4,5,6
01
02
03
All
225
225
250
-300
275
245
275
KHz
I
OUT = ±500mA
Output response to
step transient load
changes 7
VOTLOAD
50% load to/from100%load
4
+300
5,6
4
5,6
-450
-500
-750
+450
+500
+750
mVpk
No load to/from 50% load
All
Refer Notes to Specifications, refer to page 5
6
www.irf.com
AHE28XXD Series
AHE2815D
Table III. Electrical Performance Characteristics - continued
Test
Symbol
Conditions
Group A
Subgroups
Device
Types
Limits
Unit
≤
≤
-55°C Tc +125°C
Vin = 28 Vdc ±5%, CL = 0
unless otherwise specified
Min
Max
70
Recovery time
step transient
TTLOAD
50% load to/from 100% load
4
All
µs
load changes 1, 7
5,6
100
No load to 50% load
50% load to no load
Input step 17 to 40V dc
4,5,6
4,5,6
4,5,6
All
All
All
1500
5.0
1500
ms
mV pk
Output response
transient step
VOTLINE
line changes 5, 12
Input step 40 to 17V dc
Input step 17 to 40V dc
4,5,6
4,5,6
All
All
-1500
4.0
Recovery time
transient
TTLINE
ms
step line
changes 1, 5, 12
Input step 40 to 17V dc
4,5,6
4,5,6
All
All
4.0
600
Turn on
VTonOS
TonD
TrLF
mV pk
ms
±
IOUT = 0 and 500mA
overshoot 9
Turn on delay 2, 9
4,5,6
4,5,6
All
All
10
10
±
IOUT = 0 and 500mA
Load fault
ms
recovery 12
Notes to Specifications
1
2
Recovery time is measured from the initiation of the transient to where VOUT has returned to within ±0.1 % of VOUT at 50 % load.
Turn on delay time measurement is for either a step application of power at the input or the removal of a ground signal from the
inhibit pin (pin 2) while power is applied to the input.
3
An overload is that condition with a load in excess of the rated load but less than that necessary to trigger the short circuit
protection and is the condition of maximum power dissipation.
4
5
Total power at both outputs. For operation at 16Vdc input, derate output power by 33 %.
Input step transition time between 2.0µs and 10µs.
6 Capacitive load may be any value from 0 to the maximum limit without compromising dc performance. A capacitive load in excess
of the maximum limit will not disturb loop stability but may interfere with the operation of the load fault detection circuitry,
appearing as a short circuit during turn-on.
7
8
9
Load step transition time between 2.0µs and 10µs.
Bandwidth guaranteed by design. Tested for 20KHz to 2.0MHz.
Tested at each output.
10 When operating with unbalanced loads, at least 25 % of the load must be on the positive output to maintain regulation.
11 Parameter guaranteed by line and load regulation tests.
12 Parameter shall be tested as part of design characterization and after design or process changes. Thereafter parameters shall be
guaranteed to the limits specified in Table III.
www.irf.com
7
AHE28XXD Series
Block Diagram
3
4
5
+Vout
+Input
EMI
Filter
Output
Return
1
Inhibit
Input
Regulator
-Vout
Drive 1
2
Pulse Width
Modulator
FB
Sync
9
Error Amp
& Reference
Drive 2
Input
Return
10
International Rectifier offers an option that provides
synchronization of multiple AHE/ATW converters, thus
eliminating this type of noise.
Application Information
Inhibit Function
Connecting the inhibit input (Pin 2) to input common (Pin 10)
will cause the converter to shut down. It is recommended
that the inhibit pin be driven by an open collector device
capable of sinking at least 400µAof current. The open circuit
voltage of the inhibit input is 11.5 ± 1.0VDC.
To take advantage of this capability, the system designer
must assign one of the converters as the master. Then,
by definition, the remaining converters become slaves
and will operate at the masters’ switching frequency.
The user should be aware that the synchronization
system is fail-safe; that is, the slaves will continue
operating should the master frequency be interrupted for
any reason. The layout must be such that the
synchronization output (pin 9) of the master device is
connected to the synchronization input (pin 9) of each
slave device. It is advisable to keep this run short to
minimize the possibility of radiating the 250KHz switching
frequency.
EMI Filter
An optional EMI filter (AFC461) will reduce the input ripple
current to levels below the limits imposed by MIL-STD-461
CEO3.
Device Synchronization
Whenever multiple DC/DC converters are utilized in a single
system, significant low frequency noise may be generated
due to slight difference in the switching frequencies of the
converters (beat frequency noise). Because of the low
frequency nature of this noise (typically less than 10KHz), it
is difficult to filter out and may interfere with proper operation
of sensitive systems (communications, radar or telemetry).
The appropriate parts must be ordered to utilize this
feature. After selecting the converters required for the
system, a ‘MSTR’ suffix is added for the master converter
part number and a ‘SLV’ suffix is added for slave part
number.
Typical Synchronization Connection
+ In
Output
+ In
Output
AFC461
or
Case
AHE28xxS
AFV461
Return
Return
Return
Return
MSTR
System
Bus
+ In
Output
AHE28xxS
or Other
Case
Return CompatableReturn
SLV
Output
Return
+ In
Case
AHE28xxS
Return
SLV
8
www.irf.com
AHE28XXD Series
Mechanical Outlines
Flanged
Non-Flanged
Ø 0.162
2 Holes
0.050
0.800
0.040 D X
0.26 L Pins
2.880
Max
2.110
Max
4 X 0.400
=1.600
2.560
2.110
0.495
0.495
Max
1.110
Pin Designation
Designation
Pin #
1
2
+ Input
Inhibit Input
+ Output
3
4
Output Return
- Output
5
6
NC
7
NC
8
Case Ground
NC or Sync.
Input Return
9
10
Standard Microcircuit Drawing Equivalence Table
Standard Microcircuit
Vendor Cage
Code
IR Standard
Part Number
AHE2812D
Drawing Number
5962-92040
52467
5962-91575
AHE2815D
52467
www.irf.com
9
AHE28XXD Series
Device Screening
Requirement
MIL-STD-883 Method No Suffix
ES
HB
CH
Temperature Range
Element Evaluation
Non-Destructive
Bond Pull
-20°C to +85°C -55°C to +125°C
-55°C to +125°C -55°C to +125°C
MIL-PRF-38534
2023
N/A
N/A
N/A
N/A
Class H
N/A
N/A
N/A
Internal Visual
Temperature Cycle
Constant Acceleration
PIND
2017
1010
Yes
Cond B
500 Gs
N/A
Yes
Cond C
3000 Gs
N/A
Yes
Cond C
3000 Gs
N/A
N/A
N/A
2001, Y1 Axis
2020
N/A
Burn-In
1015
N/A
48 hrs@hi temp 160 hrs@125°C 160 hrs@125°C
Final Electrical
( Group A )
MIL-PRF-38534
& Specification
MIL-PRF-38534
1014
25°C
25°C
-55°C, +25°C,
+125°C
N/A
-55°C, +25°C,
+125°C
10%
PDA
N/A
Cond A
N/A
N/A
Cond A, C
N/A
Seal, Fine and Gross
Radiographic
External Visual
Cond A, C
N/A
Cond A, C
N/A
2012
2009
Yes
Yes
Yes
Notes:
Best commercial practice
Sample tests at low and high temperatures
-55°C to +105°C for AHE, ATO, ATW
Part Numbering
AHE 28 15 D F /CH - MSTR
Sync Option
MSTR = Master
SLV = Slave
Model
Omit for Standard
Input Voltage
Nominal
28 = 28V
Screening Level
(Please refer to Screening Table)
No Suffix, ES, HB, CH
Package Option
F = Flange
Blank = Non-Flanged
Output Voltage
05 = ±5V
12 = ±12V
15 = ±15V
Output
D = Dual
WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, Tel: (310) 252-7105
IR SANTA CLARA: 2270 Martin Av., Santa Clara, California 95050, Tel: (408) 727-0500
Visit us at www.irf.com for sales contact information.
Data and specifications subject to change without notice. 01/2007
10
www.irf.com
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明