HIN205A [INTERSIL]
High Speed +5V Powered RS-232 Transmitters/Receivers; 高速+ 5V供电的RS - 232发射器/接收器
| 型号： | HIN205A |
| 厂家： | 
Intersil |
| 描述： | High Speed +5V Powered RS-232 Transmitters/Receivers |
| 文件： | 总17页 (文件大小：249K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HIN202A thru HIN241A
TM
Data Sheet
May 2000
File Number 4316.4
High Speed +5V Powered RS-232
Transmitters/Receivers
Features
• Meets All RS-232E and V.28 Specifications
The HIN202A-HIN241A family of high-speed RS-232
transmitters/receivers interface circuits meet all ElA high-
speed RS-232E and V.28 specifications, and are particularly
suited for those applications where ±12V is not available.
They require a single +5V power supply and feature onboard
charge pump voltage converters which generate +10V and
-10V supplies from the 5V supply. The HIN205A and
HIN235A require no external capacitors and are ideally
suited for applications where circuit board space is critical.
The family of devices offers a wide variety of high-speed RS-
232 transmitter/receiver combinations to accommodate
various applications (see Selection Table).
• Requires Only 0.1µF or Greater External Capacitors
(HIN205A, HIN235A and Require No External Capacitors)
• High Data Rate. . . . . . . . . . . . . . . . . . . . . . . . . . 230kbit/s
• Two Receivers Active in Shutdown Mode (HIN213A)
• Requires Only Single +5V Power Supply
• Onboard Voltage Doubler/Inverter
• Low Power Consumption (Typ) . . . . . . . . . . . . . . . . . 5mA
• Low Power Shutdown Function (Typ) . . . . . . . . . . . . 1µA
• Three-State TTL/CMOS Receiver Outputs
The HIN205A, HIN206A, HIN211A, HIN213A, HIN235A,
HIN236A, and HIN241A feature a low power shutdown mode
to conserve energy in battery powered applications. In
addition, the HIN213A provides two active receivers in
shutdown mode allowing for easy “wakeup” capability.
• Multiple Drivers
- ±10V Output Swing for +5V lnput
- 300Ω Power-Off Source Impedance
- Output Current Limiting
- TTL/CMOS Compatible
The drivers feature true TTL/CMOS input compatibility, slew
rate-limited output, and 300Ω power-off source impedance.
The receivers can handle up to ±30V input, and have a 3kΩ
to 7kΩ input impedance. The receivers also feature
hysteresis to greatly improve noise rejection.
• Multiple Receivers
- ±30V Input Voltage Range
- 3kΩ to 7kΩ Input Impedance
- 0.5V Hysteresis to Improve Noise Rejection
Applications
• Any System Requiring High-Speed RS-232
Communication Ports
- Computer - Portable, Mainframe, Laptop
- Peripheral - Printers and Terminals
- Instrumentation, UPS
- Modems
Selection Table
NUMBER OF NUMBER OF
NUMBER OF 0.1µF
LOW POWER
SHUTDOWN/TTL THREE-
STATE
NUMBER OF
RECEIVERS ACTIVE
IN SHUTDOWN
PART
NUMBER
POWER SUPPLY
VOLTAGE
RS-232
RS-232
EXTERNAL
CAPACITORS
DRIVERS
RECEIVERS
HIN202A
HIN205A
HIN206A
HIN207A
HIN208A
HIN211A
HIN213A
HIN232A
HIN235A
HIN236A
HIN237A
HIN238A
HIN241A
+5V
+5V
+5V
+5V
+5V
+5V
+5V
+5V
+5V
+5V
+5V
+5V
+5V
2
5
4
5
4
4
4
2
5
4
5
4
4
2
5
3
3
4
5
5
2
5
3
3
4
5
4 Capacitors
None
No/No
Yes/Yes
Yes/Yes
No/No
0
0
0
0
0
0
2
0
0
0
0
0
0
4 Capacitors
4 Capacitors
4 Capacitors
4 Capacitors
4 Capacitors
4 Capacitors
None
No/N
Yes/Yes
Yes/Yes
No/No
Yes/Yes
Yes/Yes
No/No
4 Capacitors
4 Capacitors
4 Capacitors
4 Capacitors
No/No
Yes/Yes
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil and Design is a trademark of Intersil Corporation. | Copyright © Intersil Corporation 2000
3-1
HIN202A thru HIN241A
Ordering Information
TEMP.
TEMP.
o
o
PART NO.
HIN211ACB-T
HIN213ACA
HIN213ACA-T
HIN213ACB
HIN213ACB-T
HIN232ACA
HIN232ACA-T
HIN232ACB
HIN232ACB-T
HIN232ACBN
HIN232ACBN-T
HIN232ACP
HIN235ACP
HIN236ACA
HIN236ACB
HIN236ACB-T
HIN236ACP
HIN237ACA
HIN237ACB
HIN237ACP
HIN238ACA
HIN238ACB
HIN238ACP
HIN241ACA
HIN241ACB
RANGE ( C)
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
PACKAGE
Tape and Reel
24 Ld SSOP
Tape and Reel
28 Ld SOIC
PKG. NO.
M28.209
M28.3
PART NO.
HIN202ACA-T
HIN202ACB
HIN202ACB-T
HIN202ACBN
HIN202ACBN-T
HIN202ACP
HIN205ACP
HIN206ACA
HIN206ACA-T
HIN206ACB
HIN206ACB-T
HIN206ACP
HIN207ACA
HIN207ACA-T
HIN207ACB
HIN207ACB-T
HIN207ACP
HIN208ACA
HIN208ACA-T
HIN208ACB
HIN208ACB-T
HIN208ACP
HIN211ACA
HIN211ACA-T
HIN211ACB
RANGE ( C)
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
PACKAGE
Tape and Reel
16 Ld SOIC
PKG. NO.
M16.3
Tape and Reel
16 Ld SOIC
M16.15
Tape and Reel
16 Ld SSOP
Tape and Reel
16 Ld SOIC
Tape and Reel
16 Ld PDIP
M16.209
M16.3
E16.3
24 Ld PDIP
E24.6
24 Ld SSOP
Tape and Reel
24 Ld SOIC (W)
Tape and Reel
24 Ld PDIP
M24.209
Tape and Reel
16 Ld SOIC (N)
Tape and Reel
16 Ld PDIP
M16.15
M24.3
E16.3
E24.3
24 Ld PDIP
E24.6
24 Ld SSOP
Tape and Reel
24 Ld SOIC
M24.209
24 Ld SSOP
24 Ld SOIC (W)
Tape and Reel
24 Ld PDIP
M24.209
M24.3
M24.3
Tape and Reel
24 Ld PDIP
E24.3
E24.3
24 Ld SSOP
24 Ld SOIC
M24.209
M24.3
24 Ld SSOP
Tape and Reel
24 Ld SOIC
M24.209
24 Ld PDIP
E24.3
M24.3
24 Ld SSOP
24 Ld SOIC
M24.209
M24.3
Tape and Reel
24 Ld PDIP
E24.3
24 Ld PDIP
E24.3
28 Ld SSOP
Tape and Reel
28 Ld SOIC
M28.209
28 Ld SSOP
28 Ld SOIC
M28.209
M28.3
M28.3
3-2
HIN202A thru HIN241A
Pinouts
HIN202A (PDIP, SOIC)
HIN205A (PDIP)
TOP VIEW
TOP VIEW
T4
T3
T1
T2
1
2
3
4
5
6
7
8
9
24
R3
OUT
OUT
OUT
OUT
IN
1
2
3
4
5
6
7
8
16
15
14
13
12
C1+
V+
V
CC
23 R3
OUT
IN
GND
T1
22 T5
C1-
C2+
C2-
V-
OUT
21 SD
20 EN
R1
R1
T1
IN
R2
IN
OUT
OUT
R2
19 T5
OUT
11
10
9
IN
IN
T2
18 R4
17 R4
16 T4
IN
IN
IN
T2
T2
T1
OUT
OUT
R2
OUT
R2
R1
IN
OUT
IN
IN
R1
10
15 T3
IN
GND 11
14 R5
OUT
IN
V
12
13 R5
CC
+5V
+5V
12
0.1µF
V
+
16
CC
+5V
T1
3
400kΩ
8
7
T1
T1
IN
OUT
V
CC
1
0.1µF
+5V
+5V
+5V
T2
C1+
+
+
+
2
400kΩ
+5V TO 10V
VOLTAGE INVERTER
4
2
1
0.1µF
0.1µF
T2
T3
T4
T2
T3
T4
V+
V-
OUT
IN
3
4
C1-
T3
T4
15
16
400kΩ
400kΩ
C2+
OUT
OUT
IN
IN
+10V TO -10V
VOLTAGE INVERTER
6
5
C2-
0.1µF
+
+5V
+5V
T1
T5
14
400kΩ
11
400kΩ
22
9
19
10
T1
T1
IN
T5
T5
OUT
OUT
IN
R1
R1
R2
R3
+5V
T2
OUT
OUT
OUT
IN
IN
IN
400kΩ
10
12
7
5kΩ
5kΩ
5kΩ
T2
R1
T2
IN
R1
OUT
5
6
13
R2
R3
R1
IN
OUT
R2
R3
R4
5kΩ
5kΩ
R1
23
24
9
8
R2
R2
IN
OUT
17
R2
18
R4
R5
R4
R5
OUT
IN
5kΩ
5kΩ
GND
15
14
20
13
21
OUT
EN
IN
R5
SD
GND
11
3-3
HIN202A thru HIN241A
Pinouts (Continued)
HIN206A (PDIP, SOIC, SSOP)
HIN207A (PDIP, SOIC, SSOP)
TOP VIEW
TOP VIEW
T3
T1
T2
1
2
24
23
22
21
20
19
18
17
1
2
3
4
5
6
7
8
9
24 T4
OUT
T3
T1
T2
T4
OUT
OUT
OUT
OUT
OUT
OUT
OUT
23 R2
R2
IN
IN
R2
T5
3
22
21
20
19
18
17
16
R2
OUT
OUT
R1
4
R1
SD
EN
T4
IN
IN
IN
R1
T5
T4
T3
5
R1
OUT
OUT
IN
OUT
T2
IN
6
T2
IN
IN
T1
IN
7
T3
IN
T1
IN
IN
R3
8
GND
R3
GND
OUT
IN
OUT
IN
V
R3
9
16 R3
V
CC
CC
10
11
12
15
14
13
C1+ 10
V+ 11
15 V-
V-
C1+
V+
14 C2-
13 C2+
C2-
C1- 12
C2+
C1-
+5V
+5V
9
9
0.1µF
10
+
12
V
+
+
CC
C1+
11
0.1µF
10
V+
0.1µF
0.1µF
V
+
+
+5V TO 10V
VOLTAGE DOUBLER
CC
C1+
+
12
11
C1-
V+
V-
0.1µF
0.1µF
+5V TO 10V
VOLTAGE DOUBLER
13
+
14
C1-
C2+
+10V TO -10V
VOLTAGE INVERTER
13
+
14
15
2
V-
C2+
+10V TO -10V
VOLTAGE INVERTER
C2-
15
2
0.1µF
C2-
0.1µF
+5V
T1
400kΩ
7
+5V
T1
T1
IN
T1
T2
OUT
400kΩ
7
T1
T1
IN
OUT
+5V
T2
400kΩ
6
3
T2
T2
IN
+5V
+5V
+5V
OUT
400kΩ
6
3
1
T2
T2
IN
OUT
+5V
+5V
+5V
T3
T4
T5
400kΩ
400kΩ
400kΩ
18
19
1
T3
T4
T5
T3
IN
T3
T4
OUT
OUT
OUT
400kΩ
400kΩ
18
T3
T4
T3
IN
OUT
24
T4
IN
19
5
24
4
T4
IN
OUT
21
5
20
4
T5
IN
R1
R1
IN
IN
OUT
5kΩ
5kΩ
R1
R1
R1
IN
OUT
5kΩ
5kΩ
R1
22
23
R2
R2
OUT
22
17
23
16
R2
R2
R2
R3
IN
OUT
R2
17
20
16
21
R3
R3
IN
OUT
EN
5kΩ
R3
R3
IN
OUT
SD
5kΩ
R3
GND
GND
8
8
3-4
HIN202A thru HIN241A
Pinouts (Continued)
HIN208A (PDIP, SOIC, SSOP)
HIN211A (SOIC, SSOP)
TOP VIEW
TOP VIEW
T3
T1
T2
1
2
3
4
5
6
7
8
9
28 T4
OUT
OUT
OUT
OUT
T2
T1
T3
1
2
24
23
22
21
20
19
18
17
16
15
14
13
OUT
OUT
27 R3
IN
R3
R3
T4
OUT
IN
26 R3
OUT
R2
3
IN
OUT
25 SD
24 EN
R2
IN
R2
4
OUT
IN
R2
OUT
T1
IN
T4
T3
T2
5
OUT
T2
T1
23 R4
22 R4
IN
IN
R1
6
OUT
IN
IN
OUT
IN
R1
IN
7
IN
R1
21 T4
20
OUT
R4
R4
V-
GND
8
OUT
R1
IN
T3
V
IN
9
CC
IN
GND 10
11
19 R5
18 R5
17 V-
OUT
IN
C1+
V+
10
11
12
V
CC
C2-
C1+ 12
V+ 13
C1-
C2+
16 C2-
15 C2+
C1- 14
+5V
+5V
9
11
0.1µF
12
+
14
V
+
+
CC
C1+
0.1µF
10
13
V
+
+
CC
C1+
V+
V-
0.1µF
0.1µF
+5V TO 10V
VOLTAGE DOUBLER
+
12
11
V+
V-
0.1µF
0.1µF
C1-
+5V TO 10V
VOLTAGE DOUBLER
15
+
16
C1-
C2+
13
+
14
+10V TO -10V
VOLTAGE INVERTER
17
2
C2+
+10V TO -10V
VOLTAGE INVERTER
15
2
C2-
0.1µF
C2-
0.1µF
+5V
T1
400kΩ
7
+5V
T1
T2
T1
T1
IN
OUT
400kΩ
5
T1
T1
IN
OUT
+5V
+5V
+5V
T2
T3
T4
+5V
+5V
+5V
400kΩ
400kΩ
400kΩ
6
3
1
T2
T3
T4
T2
IN
400kΩ
18
19
1
OUT
T2
T2
IN
OUT
T3
T4
20
400kΩ
400kΩ
24
T3
IN
OUT
OUT
T3
T4
T3
IN
OUT
21
6
20
7
21
8
28
9
T4
IN
OUT
T4
IN
R1
R1
IN
OUT
R1
R1
IN
OUT
5kΩ
R1
5kΩ
R1
4
22
17
3
5
26
22
4
R2
R3
R4
R2
R3
R4
IN
IN
IN
OUT
OUT
OUT
R2
R3
R4
R5
R2
R3
R4
R5
IN
IN
IN
OUT
OUT
OUT
5kΩ
5kΩ
5kΩ
R2
R3
5kΩ
5kΩ
5kΩ
5kΩ
R2
R3
R4
23
16
27
23
R4
19
24
18
25
GND
IN
OUT
EN
8
R5
SD
GND
10
3-5
HIN202A thru HIN241A
Pinouts (Continued)
HIN213A (SOIC, SSOP)
HIN232A (PDIP, SOIC)
TOP VIEW
TOP VIEW
1
2
3
4
5
6
7
8
16
15
14
13
12
C1+
V+
V
CC
T3
T1
T2
1
2
3
4
5
6
7
8
9
28 T4
OUT
OUT
OUT
OUT
27 R3
26 R3
GND
T1
IN
OUT
C1-
C2+
C2-
V-
OUT
25 SD
24 EN
R2
IN
R1
R1
T1
IN
R2
OUT
OUT
T2
T1
23 R4
22 R4
IN
IN
11
10
9
IN
IN
IN
OUT
IN
T2
T2
OUT
R1
21 T4
20
OUT
R2
OUT
R2
IN
R1
IN
T3
IN
GND 10
11
19 R5
18 R5
17 V-
OUT
IN
V
CC
C1+ 12
V+ 13
16 C2-
15 C2+
C1- 14
NOTE: R4 and R5 active in shutdown.
+5V
11
+5V
0.1µF
12
V
+
CC
C1+
+
14
13
16
V+
V-
0.1µF
0.1µF
+5V TO 10V
VOLTAGE DOUBLER
C1-
15
+
16
C2+
V
CC
+10V TO -10V
VOLTAGE INVERTER
17
2
1
0.1µF
C1+
+
+
+
C2-
2
0.1µF
+5V TO 10V
VOLTAGE INVERTER
0.1µF
0.1µF
V+
V-
+
3
4
+5V
C1-
T1
400kΩ
7
T1
T1
IN
OUT
C2+
+
+10V TO -10V
VOLTAGE INVERTER
6
5
+5V
+5V
+5V
T2
T3
T4
C2-
0.1µF
400kΩ
400kΩ
400kΩ
6
3
1
T2
T3
T4
T2
IN
OUT
+5V
T1
14
400kΩ
11
T1
T1
IN
OUT
20
T3
IN
OUT
OUT
+5V
T2
400kΩ
10
12
7
T2
R1
T2
IN
21
8
28
9
OUT
T4
IN
13
R1
R1
R1
IN
IN
OUT
OUT
OUT
5kΩ
5kΩ
5kΩ
R1
R1
5
26
22
4
R2
R3
R4
R5
9
8
R2
R3
R4
R5
IN
IN
IN
OUT
OUT
OUT
R2
R2
IN
5kΩ
5kΩ
5kΩ
5kΩ
R2
R3
R4
R2
27
23
GND
15
19
24
18
25
IN
OUT
EN
R5
SD
GND
10
3-6
HIN202A thru HIN241A
Pinouts (Continued)
HIN235A (PDIP)
HIN236A (PDIP, SOIC, SSOP)
TOP VIEW
TOP VIEW
T4
T3
T1
T2
1
2
24
1
2
24
23
22
21
20
19
18
17
R3
T3
T1
T2
T4
OUT
OUT
OUT
OUT
OUT
IN
OUT
OUT
OUT
23 R3
22 T5
R2
OUT
IN
3
3
R2
IN
OUT
21 SD
4
4
R1
SD
EN
T4
IN
R2
5
20 EN
19 T5
5
R1
IN
OUT
R2
6
6
T2
IN
OUT
OUT
IN
T2
IN
7
18 R4
17 R4
16 T4
7
T3
IN
T1
IN
IN
T1
IN
8
8
R3
GND
OUT
OUT
IN
R1
9
9
16 R3
V
OUT
IN
IN
CC
R1
IN
10
15 T3
10
11
12
15
14
13
V-
C1+
V+
GND 11
14 R5
C2-
OUT
IN
V
12
13 R5
C2+
C1-
CC
+5V
12
+5V
9
0.1µF
0.1µF
10
+
12
V
V
CC
+
+
+
CC
C1+
11
+5V
V+
V-
0.1µF
0.1µF
T1
+5V TO 10V
VOLTAGE DOUBLER
3
400kΩ
8
7
C1-
T1
T1
OUT
IN
13
+
14
C2+
+5V
+5V
+5V
T2
+10V TO -10V
VOLTAGE INVERTER
15
2
400kΩ
4
2
1
T2
T3
T4
T2
T3
T4
OUT
IN
C2-
0.1µF
T3
T4
+5V
T1
T2
15
16
400kΩ
400kΩ
400kΩ
7
OUT
OUT
IN
IN
T1
T1
IN
OUT
+5V
+5V
+5V
400kΩ
6
3
1
T2
T2
IN
OUT
+5V
T5
400kΩ
22
9
19
10
T3
T4
T5
T5
OUT
IN
400kΩ
400kΩ
18
T3
T4
T3
IN
OUT
OUT
R1
R1
R2
R3
OUT
OUT
OUT
IN
IN
IN
5kΩ
5kΩ
5kΩ
19
5
24
4
R1
R2
R3
T4
IN
5
6
R2
R3
R1
R1
IN
OUT
5kΩ
5kΩ
R1
23
24
22
23
R2
R2
IN
OUT
R2
17
18
R4
R5
R4
R5
17
20
16
21
OUT
IN
R3
R3
IN
OUT
EN
5kΩ
5kΩ
R4
5kΩ
R3
SD
14
20
13
21
OUT
EN
IN
GND
R5
8
SD
GND
11
3-7
HIN202A thru HIN241A
Pinouts (Continued)
HIN237A (PDIP, SOIC, SSOP)
HIN238A (PDIP, SOIC, SSOP)
TOP VIEW
TOP VIEW
T3
T1
T2
T4
OUT
OUT
OUT
OUT
T2
T1
T3
1
2
24
23
22
21
20
19
18
17
16
15
14
13
OUT
OUT
1
2
24
23
22
21
20
19
18
17
16
15
14
13
R2
R2
T5
IN
R3
R3
T4
OUT
IN
OUT
R2
3
IN
OUT
3
R1
IN
OUT
IN
R2
4
OUT
IN
4
R1
T5
T4
T3
OUT
T1
IN
T4
T3
T2
5
OUT
5
T2
IN
IN
IN
R1
6
OUT
IN
6
T1
IN
R1
IN
7
IN
7
R3
R3
V-
GND
OUT
R4
R4
V-
GND
8
OUT
8
V
CC
IN
V
9
CC
IN
9
C1+
V+
C1+
V+
10
11
12
10
11
12
C2-
C2-
C1-
C2+
C1-
C2+
+5V
9
+5V
9
0.1µF
0.1µF
10
10
+
12
V
V
CC
+
+
+
CC
C1+
C1+
+
12
11
11
V+
V-
V+
V-
0.1µF
0.1µF
0.1µF
0.1µF
+5V TO 10V
VOLTAGE DOUBLER
+5V TO 10V
VOLTAGE DOUBLER
C1-
C1-
13
+
14
13
+
14
C2+
C2+
+10V TO -10V
VOLTAGE INVERTER
+10V TO -10V
VOLTAGE INVERTER
15
2
15
2
C2-
C2-
0.1µF
0.1µF
+
+5V
+5V
T1
T1
T2
400kΩ
400kΩ
7
5
T1
T1
T1
IN
T1
IN
OUT
OUT
+5V
T2
+5V
+5V
+5V
400kΩ
400kΩ
6
3
18
19
1
T2
T2
T2
IN
T2
IN
OUT
OUT
+5V
+5V
+5V
T3
T4
T5
T3
T4
400kΩ
400kΩ
400kΩ
400kΩ
400kΩ
18
19
1
24
T3
T4
T5
T3
T4
T3
IN
T3
IN
OUT
OUT
OUT
OUT
OUT
24
21
6
20
7
T4
IN
T4
IN
R1
R1
IN
OUT
21
5
20
4
T5
IN
5kΩ
R1
R1
R1
IN
OUT
4
22
17
3
R2
R3
R4
R2
R3
R4
5kΩ
5kΩ
IN
IN
IN
OUT
OUT
OUT
R1
5kΩ
5kΩ
5kΩ
R2
R3
22
17
23
16
R2
R2
R3
IN
23
16
OUT
R2
R3
IN
OUT
5kΩ
R3
R4
GND
GND
8
8
3-8
HIN202A thru HIN241A
Pinouts (Continued)
HIN241A (SOIC, SSOP)
TOP VIEW
T3
T1
T2
1
2
3
4
5
6
7
8
9
28 T4
OUT
OUT
OUT
OUT
27 R3
26 R3
IN
OUT
25 SD
24 EN
R2
IN
R2
OUT
T2
T1
23 R4
22 R4
IN
IN
IN
OUT
IN
R1
21 T4
20
OUT
R1
IN
T3
IN
GND 10
11
19 R5
18 R5
17 V-
OUT
IN
V
CC
C1+ 12
V+ 13
16 C2-
15 C2+
C1- 14
+5V
11
0.1µF
12
V
+
+
CC
C1+
+
14
13
V+
V-
0.1µF
0.1µF
+5V TO 10V
VOLTAGE DOUBLER
C1-
15
+
16
C2+
+10V TO -10V
VOLTAGE INVERTER
17
2
C2-
0.1µF
+5V
T1
400kΩ
7
T1
T1
IN
OUT
+5V
+5V
+5V
T2
T3
T4
400kΩ
400kΩ
400kΩ
6
3
1
T2
T3
T4
T2
IN
OUT
20
T3
IN
OUT
OUT
21
8
28
9
T4
IN
R1
R1
IN
OUT
5kΩ
R1
5
26
22
4
R2
R3
R4
R5
R2
R3
R4
R5
IN
IN
IN
OUT
OUT
OUT
5kΩ
5kΩ
5kΩ
5kΩ
R2
R3
R4
27
23
19
24
18
25
IN
OUT
EN
R5
SD
GND
10
3-9
HIN202A thru HIN241A
Pin Descriptions
PIN
FUNCTION
V
Power Supply Input 5V ±10%, (5V ±5% HIN207A).
CC
V+
V-
Internally generated positive supply (+10V nominal).
Internally generated negative supply (-10V nominal).
Ground Lead. Connect to 0V.
GND
C1+
C1-
C2+
C2-
External capacitor (+ terminal) is connected to this lead.
External capacitor (- terminal) is connected to this lead.
External capacitor (+ terminal) is connected to this lead.
External capacitor (- terminal) is connected to this lead.
Transmitter Inputs. These leads accept TTL/CMOS levels. An internal 400kΩ pull-up resistor to V
Transmitter Outputs. These are RS-232 levels (nominally ±10V).
T
is connected to each lead.
CC
IN
T
OUT
R
Receiver Inputs. These inputs accept RS-232 input levels. An internal 5kΩ pull-down resistor to GND is connected to each input.
IN
R
Receiver Outputs. These are TTL/CMOS levels.
OUT
EN
SD, SD
NC
Enable Input. This is an active low input which enables the receiver outputs. With EN = 5V, the outputs are placed in a high
impedance state.
Shutdown Input. With SD = 5V (HIN213A SD = 0V), the charge pump is disabled, the receiver outputs are in a high impedance
state (except R4 and R5 of HIN241A) and the transmitters are shut off.
No Connect. No connections are made to these leads.
3-10
HIN202A thru HIN241A
Absolute Maximum Ratings
Thermal Information
o
V
to Ground. . . . . . . . . . . . . . . . . . . . . . (GND -0.3V) <V
< 6V
Thermal Resistance (Typical, Note 1)
θJA ( C/W)
CC
V+ to Ground . . . . . . . . . . . . . . . . . . . . . . . . (V
CC
-0.3V) <V+ < 12V
CC
16 Ld SOIC (N) Package . . . . . . . . . . . . . . . . . . . . .
16 Ld SOIC (W) Package. . . . . . . . . . . . . . . . . . . . .
16 Ld SSOP Package . . . . . . . . . . . . . . . . . . . . . . .
16 Ld PDIP Package . . . . . . . . . . . . . . . . . . . . . . . .
24 Ld SOIC Package . . . . . . . . . . . . . . . . . . . . . . . .
24 Ld SSOP Package . . . . . . . . . . . . . . . . . . . . . . .
24 Ld PDIP (N) Package . . . . . . . . . . . . . . . . . . . . .
24 Ld PDIP (W) Package . . . . . . . . . . . . . . . . . . . . .
28 Ld SOIC Package . . . . . . . . . . . . . . . . . . . . . . . .
28 Ld SSOP Package . . . . . . . . . . . . . . . . . . . . . . .
110
100
155
90
75
135
70
55
70
100
V- to Ground. . . . . . . . . . . . . . . . . . . . . . . .-12V < V- < (GND +0.3V)
Input Voltages
T
R
. . . . . . . . . . . . . . . . . . . . . . . . . (V- -0.3V) < V < (V+ +0.3V)
IN
IN
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±30V
IN
Output Voltages
T
R
. . . . . . . . . . . . . . . . . . . .(V- -0.3V) < V
. . . . . . . . . . . . . . . . . (GND -0.3V) < V
< (V+ +0.3V)
< (V+ +0.3V)
OUT
TXOUT
RXOUT
OUT
Short Circuit Duration
T
R
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Continuous
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Continuous
OUT
o
OUT
Maximum Junction Temperature (Plastic Package) . . . . . . . .150 C
Maximum Storage Temperature Range. . . . . . . . . . -65 C to 150 C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . .300 C
o
o
ESD Classification . . . . . . . . . . . . . . . . . . . . See Specification Table
o
(SOIC and SSOP - Lead Tips Only)
Operating Conditions
Temperature Range
HIN2XXCX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 C to 70 C
o
o
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. θ is measured with the component mounted on an evaluation PC board in free air.
JA
Electrical Specifications Test Conditions: V = +5V ±10%, (V = +5V ±5% HIN207A); C1-C4 = 0.1µF; T = Operating Temperature
CC
CC
A
Range
PARAMETER
SUPPLY CURRENTS
Power Supply Current, I
TEST CONDITIONS
MIN
TYP
MAX
UNITS
No Load,
o
HIN202A
-
-
8
15
20
mA
mA
CC
T = 25 C
A
HIN205A-HIN208A,
11
HIN211A, HIN213A,
HIN234A-HIN238A,
HIN241A
HIN232A
-
-
5
1
10
10
mA
o
Shutdown Supply Current, I (SD)
CC
T = 25 C
HIN205A, HIN206A,
HIN211A, HIN235A,
HIN236A, HIN241A
µA
A
HIN213A
-
15
50
µA
LOGIC AND TRANSMITTER INPUTS, RECEIVER OUTPUTS
Input Logic Low, V
T
T
, EN, SD, EN, SD
-
2.0
2.4
-
-
-
0.8
-
V
V
lL
IN
IN
Input Logic High, V
lH
EN, SD, EN, SD
= 0V
-
-
V
Transmitter Input Pullup Current, I
T
15
0.1
200
0.4
µA
V
P
IN
TTL/CMOS Receiver Output Voltage Low, V
I
= 1.6mA
-
OL
OUT
(HIN202A, HIN232A, I
= 3.2mA)
OUT
TTL/CMOS Receiver Output Voltage High, V
TTL/CMOS Receiver Output Leakage
RECEIVER INPUTS
I
= -1mA
3.5
-
4.6
0.5
-
V
OH
OUT
EN = V , EN = 0, 0V < R
CC
< V
±10
µA
OUT
CC
RS-232 Input Voltage Range, V
IN
-30
3.0
-
+30
7.0
V
o
Receiver Input Impedance, R
IN
T = 25 C, V = ±3V
5.0
kΩ
A
IN
3-11
HIN202A thru HIN241A
Electrical Specifications Test Conditions: V = +5V ±10%, (V = +5V ±5% HIN207A); C1-C4 = 0.1µF; T = Operating Temperature
CC
CC
A
Range (Continued)
PARAMETER
Receiver Input Low Threshold, V (H-L)
TEST CONDITIONS
MIN
TYP
1.2
MAX
UNITS
V
= 5V,
Active Mode
-
-
-
-
V
V
IN
CC
T = 25 C
o
A
Shutdown Mode
1.5
HIN213A R4 and R5
Receiver Input High Threshold, V (L-H)
IN
V
= 5V,
Active Mode
-
-
1.7
1.5
2.4
2.4
V
V
CC
T = 25 C
o
A
Shutdown Mode
HIN213A R4 and R5
Receiver Input Hysteresis, V
HYST
V
= 5V
0.2
0.5
1.0
V
CC
No Hysteresis in Shutdown Mode
TIMING CHARACTERISTICS
Output Enable Time, t
HIN205A, HIN206A, HIN211A, HIN213A,
HIN235A, HIN236A, HIN241A
-
-
600
200
-
-
ns
ns
EN
Output Disable Time, t
DIS
HIN205A, HIN206A, HIN211A, HIN213A,
HIN235A, HIN236A, HIN241A
Transmitter, Receiver Propagation Delay, t
HIN213A SD = 0V, R4, R5
-
-
4.0
0.5
0.5
20
40
10
10
45
µs
µs
PD
HIN213A SD = V , R1 - R5
CC
All except HIN213A
-
µs
Transition Region Slew Rate, SR
R
= 3kΩ, C = 1000pF
3
V/µs
T
L
L
Measured from +3V to -3V or -3V to +3V
(Note 2) 1 Transmitter Switching
TRANSMITTER OUTPUTS
Output Voltage Swing, T
Transmitter Outputs, 3kΩ to Ground
±5
300
-
±9
-
±10
V
Ω
OUT
Output Resistance, R
OUT
V
= V+ = V- = 0V, V
OUT
= ±2V
-
-
CC
RS-232 Output Short Circuit Current, I
ESD PERFORMANCE
RS-232 Pins
T
Shorted to GND
±10
mA
SC
OUT
Human Body Model
-
-
-
-
±15
±8
-
-
-
-
kV
kV
kV
kV
(T , R )
OUT IN
IEC1000-4-2 Contact Discharge
IEC1000-4-2 Air Gap (Note 3)
Human Body Model
±15
±2
All Other Pins
NOTES:
2. Guaranteed by design.
3. Meets level 4 with exception of HIN205A T5
= ±12kV.
OUT
3-12
HIN202A thru HIN241A
Test Circuits (HIN232A)
+4.5V TO
+5.5V INPUT
C1+
V+
1
2
3
4
5
6
7
8
16
15
14
V
CC
GND
T1
-
+
0.1µF
C3
C1-
C2+
C2-
OUT
V
C1+
V+
1
2
3
4
5
6
7
8
16
CC
R1 13
IN
+
0.1µF
3kΩ
GND 15
C1
R1
OUT
12
11
10
9
-
T1
C1-
C2+
C2-
V-
14
13
12
11
T1 OUTPUT
OUT
T1
IN
V-
R1
IN
RS-232 ±30V INPUT
TTL/CMOS OUTPUT
TTL/CMOS INPUT
+
0.1µF
T2
T2
IN
OUT
C2
-
R1
OUT
-
+
R2
IN
R2
OUT
T1
IN
0.1µF C4
T2
TTL/CMOS INPUT
T2 10
IN
OUT
3kΩ
R
= V /I T2
IN
OUT
OUT
R2
OUT
9
TTL/CMOS OUTPUT
R2
IN
T1
T2
OUT
OUTPUT
V
= ±2V
A
IN
RS-232
±30V INPUT
FIGURE 1. GENERAL TEST CIRCUIT
FIGURE 2. POWER-OFF SOURCE RESISTANCE
CONFIGURATION
VOLTAGE DOUBLER
VOLTAGE INVERTER
S5
S1
S3
S2
S4
C2+
C1+
V+ = 2V
S6
CC
V
GND
CC
+
-
+
-
+
-
+
-
C3
C2
C4
C1
V
GND
CC
GND
V- = - (V+)
C1-
C2-
S7
S8
RC
OSCILLATOR
FIGURE 3. CHARGE PUMP
Detailed Description
The HIN2XXA family of high-speed RS-232
voltage doubler section (V+) is approximately 200Ω, and the
output impedance of the voltage inverter section (V-) is
approximately 450Ω. A typical application uses 0.1µF
capacitors for C1-C4, however, the value is not critical.
Increasing the values of C1 and C2 will lower the output
impedance of the voltage doubler and inverter, increasing
the values of the reservoir capacitors, C3 and C4, lowers the
ripple on the V+ and V- supplies.
transmitters/receivers are powered by a single +5V power
supply, feature low power consumption, and meet all ElA
RS232C and V.28 specifications. The circuit is divided into
three sections: the charge pump, transmitter, and receiver.
Charge Pump
An equivalent circuit of the charge pump is illustrated in
Figure 3. The charge pump contains two sections: The
voltage doubler and the voltage inverter. Each section is
driven by a two phase, internally generated clock to generate
+10V and -10V. The nominal clock frequency is 125kHz.
During phase one of the clock, capacitor C1 is charged to
During shutdown mode (HIN205A, HIN206A, HIN211A,
HIN213A, HIN235A, HIN236A and HIN241A, the charge
pump is turned off, V+ is pulled down to V , V- is pulled up
CC
to GND, and the supply current is reduced to less than 10µA.
The transmitter outputs are disabled and the receiver
outputs (except for HIN213A, R4 and R5) are placed in the
high impedance state.
V
. During phase two, the voltage on C1 is added to V
,
CC
CC
producing a signal across C3 equal to twice V . During
CC
phase two, C2 is also charged to 2V , and then during
CC
phase one, it is inverted with respect to ground to produce a
signal across C4 equal to -2V . The charge pump accepts
CC
input voltages up to 5.5V. The output impedance of the
3-13
HIN202A thru HIN241A
Transmitters
The transmitters are TTL/CMOS compatible inverters which
translate the inputs to RS-232 outputs. The input logic
T
OR
R
IN
threshold is about 26% of V , or 1.3V for V
= 5V. A logic
CC
CC
IN
1 at the input results in a voltage of between -5V and V- at
the output, and a logic 0 results in a voltage between +5V
and (V+ -0.6V). Each transmitter input has an internal 400kΩ
pullup resistor so any unused input can be left unconnected
and its output remains in its low state. The output voltage
swing meets the RS-232C specifications of ±5V minimum
with the worst case conditions of: all transmitters driving 3kΩ
T
OUT
OR
V
OL
V
OL
R
OUT
t
t
PLH
PHL
t
t
PHL + PLH
AVERAGE PROPAGATION DELAY =
2
FIGURE 6. PROPAGATION DELAY DEFINITION
minimum load impedance, V
= 4.5V, and maximum
CC
allowable operating temperature. The transmitters have an
internally limited output slew rate which is less than 30V/µs.
The outputs are short circuit protected and can be shorted to
ground indefinitely. The powered down output impedance is
a minimum of 300Ω with ±2V applied to the outputs and
HIN241A Operation in Shutdown
The HIN213A features two receivers, R4 and R5, which
remain active in shutdown mode. During normal operation
the receivers propagation delay is typically 0.5µs. This
propagation delay may increase slightly during shutdown.
When entering shut down mode, receivers R4 and R5 are
V
= 0V.
CC
Receivers
The receiver inputs accept up to ±30V while presenting the
required 3kΩ to 7kΩ input impedance even if the power is off
not valid for 80µs after SD = V . When exiting shutdown
IL
mode, all receiver outputs will be invalid until the charge
pump circuitry reaches normal operating voltage. This is
typically less than 2ms when using 0.1µF capacitors.
(V
= 0V). The receivers have a typical input threshold of
CC
1.3V which is within the ±3V limits, known as the transition
region, of the RS-232 specifications. The receiver output is
0V to V . The output will be low whenever the input is
Application Information
CC
greater than 2.4V and high whenever the input is floating or
driven between +0.8V and -30V. The receivers feature 0.5V
hysteresis (except during shutdown) to improve noise
rejection. The receiver Enable line EN, (EN on HIN213A)
when unasserted, disables the receiver outputs, placing
them in the high impedance mode. The receiver outputs are
also placed in the high impedance state when in shutdown
mode (except HIN213A R4 and R5).
The HIN2XXA may be used for all RS-232 data terminal and
communication links. It is particularly useful in applications
where ±12V power supplies are not available for
conventional RS-232 interface circuits. The applications
presented represent typical interface configurations.
A simple duplex RS-232 port with CTS/RTS handshaking is
illustrated in Figure 7. Fixed output signals such as DTR
(data terminal ready) and DSRS (data signaling rate select)
is generated by driving them through a 5kΩ resistor
connected to V+.
V+
V
CC
In applications requiring four RS-232 inputs and outputs
(Figure 8), note that each circuit requires two charge pump
capacitors (C1 and C2) but can share common reservoir
capacitors (C3 and C4). The benefit of sharing common
reservoir capacitors is the elimination of two capacitors and
the reduction of the charge pump source impedance which
effectively increases the output swing of the transmitters.
400kΩ
300Ω
T
XIN
T
OUT
GND < T
< V
CC
XIN
V-
V- < V
TOUT
< V+
FIGURE 4. TRANSMITTER
V
CC
R
XIN
R
OUT
-30V < R
< +30V
XIN
GND < V
ROUT
< V
CC
5kΩ
GND
FIGURE 5. RECEIVER
3-14
HIN202A thru HIN241A
+5V
-
+
16
CTR (20) DATA
TERMINAL READY
1
+
-
C1
0.1µF
3
4
DSRS (24) DATA
SIGNALING RATE
SELECT
HIN232A
6
+
-
-
C2
0.1µF
RS-232
INPUTS AND OUTPUTS
5
+
T1
T2
11
14
TD
TD (2) TRANSMIT DATA
10
12
7
RTS (4) REQUEST TO SEND
RD (3) RECEIVE DATA
INPUTS RTS
OUTPUTS
13
RD
TTL/CMOS
R2
R1
9
8
CTS
CTS (5) CLEAR TO SEND
15
SIGNAL GROUND (7)
FIGURE 7. SIMPLE DUPLEX RS-232 PORT WITH CTS/RTS HANDSHAKING
1
4
+
-
+
-
C1
C2
HIN232A
5
0.1µF
3
0.1µF
T1
T2
11
14
TD
RTS
RD
TD (2) TRANSMIT DATA
RTS (4) REQUEST TO SEND
RD (3) RECEIVE DATA
10
12
7
INPUTS
OUTPUTS
TTL/CMOS
13
R2
R1
9
8
CTS
CTS (5) CLEAR TO SEND
15
V
16
CC
6
6
2
2
C4
C3
+5V
-
-
V- V+
RS-232
INPUTS AND OUTPUTS
0.2µF
0.2µF
V
16
4
CC
HIN232A
1
+
-
+
-
C1
0.1µF
C2
0.1µF
5
3
T1
T2
11
14
DTR
DSRS
DCD
R1
DTR (20) DATA TERMINAL READY
DSRS (24) DATA SIGNALING RATE SELECT
DCD (8) DATA CARRIER DETECT
R1 (22) RING INDICATOR
10
12
7
INPUTS
OUTPUTS
TTL/CMOS
13
R2
R1
9
8
15
SIGNAL GROUND (7)
FIGURE 8. COMBINING TWO HIN232As FOR 4 PAIRS OF RS-232 INPUTS AND OUTPUTS
3-15
HIN202A thru HIN241A
Typical Performance Curves
12
12
10
8
0.1µF
10
V+ (V
= 5V)
CC
8
6
4
6
V+ (V
CC
= 4V)
= 5V)
V- (V
CC
= 4V)
4
o
T
= 25 C
A
2
0
V- (V
2
CC
TRANSMITTER OUTPUTS
OPEN CIRCUIT
0
0
5
10
15
|I
20
25
30
35
3.0
3.5
4.0
4.5
5.0
5.5
6.0
V
| (mA)
CC
LOAD
FIGURE 9. V- SUPPLY VOLTAGE vs V
CC
FIGURE 10. V+, V- OUTPUT VOLTAGE vs LOAD
Die Characteristics
DIE DIMENSIONS:
PASSIVATION:
160 mils x 140 mils
Type: Nitride over Silox
Nitride Thickness: 8kÅ
Silox Thickness: 7kÅ
METALLIZATION:
Type: Al
Thickness: 10kÅ ±1kÅ
TRANSISTOR COUNT:
238
SUBSTRATE POTENTIAL
PROCESS:
V+
CMOS Metal Gate
Metallization Mask Layout
HIN241A
SHD
EN
R4
R4 T4 T3 R5
OUT IN IN
R5
IN
IN
OUT
R3
OUT
V-
C2-
R3
IN
T4
OUT
C2+
C1-
T3
OUT
T1
T2
OUT
V+
OUT
C1+
R2
IN
V
CC
R2
T2 T1 R1
R1 GND
IN
OUT IN IN OUT
3-16
HIN202A thru HIN241A
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time with-
out notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site www.intersil.com
Sales Office Headquarters
NORTH AMERICA
EUROPE
ASIA
Intersil Corporation
Intersil SA
Mercure Center
100, Rue de la Fusee
1130 Brussels, Belgium
TEL: (32) 2.724.2111
FAX: (32) 2.724.22.05
Intersil (Taiwan) Ltd.
7F-6, No. 101 Fu Hsing North Road
Taipei, Taiwan
Republic of China
TEL: (886) 2 2716 9310
FAX: (886) 2 2715 3029
P. O. Box 883, Mail Stop 53-204
Melbourne, FL 32902
TEL: (321) 724-7000
FAX: (321) 724-7240
3-17
相关型号：
©2020 ICPDF网 联系我们和版权申明