EL5106IW-T7 [INTERSIL]
350MHz Fixed Gain Amplifiers with Enable; 350MHz的固定增益放大器,使型号: | EL5106IW-T7 |
厂家: | Intersil |
描述: | 350MHz Fixed Gain Amplifiers with Enable |
文件: | 总11页 (文件大小:1033K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EL5106, EL5306
®
Data Sheet
September 1, 2004
FN7357.3
350MHz Fixed Gain Amplifiers with Enable
Features
• Pb-free Available as an Option
The EL5106 and EL5306 are fixed gain amplifiers with a
bandwidth of 350MHz. This makes these amplifiers ideal for
today’s high speed video and monitor applications. They
feature internal gain setting resistors and can be configured
in a gain of +1, -1 or +2.
• Gain selectable (+1, -1, +2)
• 350MHz -3dB BW (A = 2)
V
• 1.5mA supply current per amplifier
• Fast enable/disable
With a supply current of just 1.5mA and the ability to run
from a single supply voltage from 5V to 12V, these amplifiers
are also ideal for handheld, portable or battery powered
equipment.
• Single and dual supply operation, from 5V to 12V
• Available in SOT-23 packages
The EL5106 and EL5306 also incorporate an enable and
disable function to reduce the supply current to 25µA typical
per amplifier. Allowing the CE pin to float or applying a low
logic level will enable the amplifier.
• 450MHz, 3.5mA product available (EL5108 & EL5308)
Applications
• Battery powered equipment
• Handheld, portable devices
• Video amplifiers
The EL5106 is offered in the 6-pin SOT-23 and the industry-
standard 8-pin SO packages and the EL5306 is available in
the 16-pin SO and 16-pin QSOP packages. All operate over
the industrial temperature range of -40°C to +85°C.
• Cable drivers
• RGB amplifiers
Ordering Information
PART
TAPE &
REEL
NUMBER
PACKAGE
6-Pin SOT-23
6-Pin SOT-23
8-Pin SO
PKG. DWG. #
MDP0038
MDP0038
MDP0027
MDP0027
MDP0027
MDP0027
MDP0027
MDP0027
MDP0040
MDP0040
MDP0040
MDP0040
EL5106IW-T7
EL5106IW-T7A
EL5106IS
7” (3K pcs)
7” (250 pcs)
-
7”
13”
-
EL5106IS-T7
EL5106IS-T13
EL5306IS
8-Pin SO
8-Pin SO
16-Pin SO (0.150”)
16-Pin SO (0.150”)
EL5306IS-T7
7”
13”
-
EL5306IS-T13 16-Pin SO (0.150”)
EL5306IU
16-Pin QSOP
16-Pin QSOP
16-Pin QSOP
EL5306IU-T7
EL5306IU-T13
7”
13”
-
EL5306IUZ
(See Note)
16-Pin QSOP
(Pb-free)
EL5306IUZ-T7
(See Note)
16-Pin QSOP
(Pb-free)
7”
MDP0040
MDP0040
EL5306IUZ-
T13 (See Note)
16-Pin QSOP
(Pb-free)
13”
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which is compatible with both SnPb and
Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J Std-020B.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002-2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.
EL5106, EL5306
Pinouts
EL5106
EL5306
(16-PIN SO, QSOP)
TOP VIEW
(8-PIN SO)
TOP VIEW
INA+
CEA
VS-
1
2
3
4
5
6
7
8
16 INA-
NC
IN-
CE
1
2
3
4
8
7
6
5
-
15 OUTA
14 VS+
VS+
OUT
NC
-
+
+
IN+
VS-
+
-
CEB
INB+
NC
13 OUTB
12 INB-
11 NC
EL5106
(6-PIN SOT-23)
TOP VIEW
+
-
CEC
INC+
10 OUTC
9
INC-
OUT
VS-
IN+
VS+
CE
1
2
3
6
5
4
+
-
IN-
2
EL5106, EL5306
Absolute Maximum Ratings (T = 25°C)
A
Supply Voltage between V + and V -. . . . . . . . . . . . . . . . . . . 13.2V
Pin Voltages. . . . . . . . . . . . . . . . . . . . . . . . . V - -0.5V to V + +0.5V
S S
S
S
Maximum Continuous Output Current . . . . . . . . . . . . . . . . . . . 50mA
Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . .125°C
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C
Ambient Operating Temperature . . . . . . . . . . . . . . . .-40°C to +85°C
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests
are at the specified temperature and are pulsed tests, therefore: T = T = T
A
J
C
Electrical Specifications V + = +5V, V - = -5V, R = 150Ω, T = 25°C unless otherwise specified.
S
S
L
A
PARAMETER
DESCRIPTION
CONDITIONS
MIN
TYP
MAX
UNIT
AC PERFORMANCE
BW
-3dB Bandwidth
A
= +1
= -1
= +2
250
380
350
20
MHz
MHz
MHz
MHz
V/µs
ns
V
A
V
A
V
BW1
SR
0.1dB Bandwidth
Slew Rate
V
V
= -2.5V to +2.5V, A = +2
3000
4500
16
O
V
t
0.1% Settling Time
Input Voltage Noise
IN+ Input Current Noise
= -2.5V to +2.5V, A = 2
OUT V
S
e
2.8
nV/√Hz
pA/√Hz
%
N
i +
N
6
dG
dP
Differential Gain Error (Note 1)
Differential Phase Error (Note 1)
A
= +2
0.02
0.04
V
A
= +2
°
V
DC PERFORMANCE
V
Offset Voltage
-10
±3
1
5
10
mV
OS
T V
Input Offset Voltage Temperature
Coefficient
Measured from T
MIN
to T
MAX
µV/°C
C
OS
A
Gain Error
V
= -3V to +3V, R = 150Ω
1
2.5
%
E
O
L
R , R
Internal R and R
G
325
Ω
F
G
F
INPUT CHARACTERISTICS
CMIR
Common Mode Input Range
+ Input Current
±3.3
1.5
2
V
+I
7
µA
MΩ
pF
IN
IN
IN
R
C
Input Resistance
at I +
N
Input Capacitance
1
OUTPUT CHARACTERISTICS
V
Output Voltage Swing
R = 150Ω to GND
±3.4
±3.7
60
±3.6
±3.85
100
V
V
O
L
R = 1kΩ to GND
L
I
Output Current
R = 10Ω to GND
mA
OUT
L
SUPPLY
I
I
Supply Current - Enabled (per amplifier) No load, V = 0V
IN
1.35
1.5
12
75
1.82
25
mA
µA
dB
SON
Supply Current - Disabled (per amplifier) No load, V = 0V
IN
SOFF
PSRR
Power Supply Rejection Ratio
Enable Time
DC, V = ±4.75V to ±5.25V
S
ENABLE
t
280
ns
EN
3
EL5106, EL5306
Electrical Specifications V + = +5V, V - = -5V, R = 150Ω, T = 25°C unless otherwise specified. (Continued)
S
S
L
A
PARAMETER
DESCRIPTION
CONDITIONS
MIN
TYP
400
5
MAX
UNIT
ns
t
I
I
Disable Time
DIS
CE Pin Input High Current
CE Pin Input Low Current
CE = V +
1
25
-1
µA
µA
V
IHCE
ILCE
S
CE = V -
+1
0
S
V
V
CE Input High Voltage for Power-down
CE Input Low Voltage for Enable
V + -1
S
IHCE
ILCE
V + -3
V
S
NOTE:
1. Standard NTSC test, AC signal amplitude = 286mV , f = 3.58MHz
P-P
Pin Descriptions
EL5306
EL5106
(SO8)
EL5106
(SO16,
PIN
(SOT23-6)
QSOP16)
NAME
FUNCTION
Not connected
EQUIVALENT CIRCUIT
1, 5
2
6, 11
NC
IN-
4
9, 12, 16
Inverting input
R
G
IN+
IN-
R
F
CIRCUIT 1
3
4
6
3
2
1
1, 5, 8
3
IN+
VS-
Non-inverting input
Negative supply
Output
(Reference Circuit 1)
10, 13, 15
OUT
OUT
R
F
CIRCUIT 2
7
8
6
5
14
VS+
CE
Positive supply
Chip enable
2, 4, 7
V +
S
CE
V -
S
CIRCUIT 3
4
EL5106, EL5306
Typical Performance Curves
5
11
9
A =+2
V
V =±5V
S
C
= 10pF
L
V =±5V
S
R =150Ω
L
R =150Ω
L
3
1
C
= 6.8pF
L
7
5
3
1
A
= -1
V
C
= 2.2pF
L
-1
-3
A = 2
V
C
= 0pF
L
A
= 1
V
-5
100K
1M
10M
FREQUENCY (Hz)
1G
100K
1M
10M
FREQUENCY (Hz)
1G
100M
100M
FIGURE 1. FREQUENCY RESPONSE
FIGURE 2. FREQUENCY RESPONSE FOR VARIOUS C
L
1.6
450
R
= 150Ω
L
R
= 150Ω
L
A
= -1
V
A
= -1
= 2
V
1.2
0.8
0.4
0
350
250
150
A
= 1, 2
V
A
V
A
= 1
V
1
10
100
1K
4.5
5
5.5
6
6.5
7 7.5 8 8.5 9 9.5 10 10.5 11
FREQUENCY (Hz)
FREQUENCY (Hz)
FIGURE 3. GROUP DELAY vs FREQUENCY
FIGURE 4. BANDWIDTH vs SUPPLY VOLTAGE
0
-10
-20
1
R
= 150Ω
L
0.8
0.6
0.4
0.2
0
A
= -1
= 2
V
-30
-40
-50
-60
-70
-80
PSRR+
A
V
PSRR-
A
= 1
V
1K
10K
100K
1M
10M
100M
4.5
5
5.5
6
6.5
7
7.5
8
8.5
9
9.5 10 10.5 11
FREQUENCY (Hz)
V
(V)
S
FIGURE 5. PEAKING vs SUPPLY VOLTAGE
FIGURE 6. POWER SUPPLY REJECTION RATIO vs
FREQUENCY
5
EL5106, EL5306
Typical Performance Curves (Continued)
1.6
1.55
1.5
100
10
I -
S
1.45
1.4
I +
S
1.35
1.3
1
1.25
1.2
0.1
10K
4.5
5
5.5
6
6.5
7
7.5
8
8.5 9 9.5 10 10.5 11
100K
1M
100M
10M
V
(V)
S
FREQUENCY (Hz)
FIGURE 7. OUTPUT IMPEDANCE vs FREQUENCY
FIGURE 8. SUPPLY CURRENT vs SUPPLY VOLTAGE (PER
AMPLIFIER)
0
V =±5V
S
-10
-20
-30
-40
-50
-60
-70
-80
-90
M=100ns
A =2
V
R =150Ω
L
OP-P
V
=2V
CH1 2.00V/DIV
CH2 1.00V/DIV
HD3
HD2
0
10
20
30
40
50
60
FREQUENCY (MHz)
FIGURE 9. HARMONIC DISTORTION vs FREQUENCY
FIGURE 10. ENABLED RESPONSE
JEDEC JESD51-3 LOW EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD
1
909mW
0.9
SO16 (0.150”)
M=100ns
θ
=110°C/W
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
JA
CH1 2.00V/DIV
625mW
633mW
SO8
θ
θ
=160°C/W
JA
391mW
SOT23-6
QSOP16
=158°C/W
JA
CH2 1.00V/DIV
θ
=256°C/W
JA
0
25
50
75 85 100
125
150
AMBIENT TEMPERATURE (°C)
FIGURE 11. DISABLED RESPONSE
FIGURE 12. PACKAGE POWER DISSIPATION vs AMBIENT
TEMPERATURE
6
EL5106, EL5306
Typical Performance Curves (Continued)
JEDEC JESD51-7 HIGH EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD
1.4
1.2
1
1.250W
SO16 (0.150”)
θ
=80°C/W
JA
909mW
893mW
SO8
0.8
0.6
0.4
θ
θ
=110°C/W
JA
435mW
SOT23-6
QSOP16
θ
=230°C/W
=112°C/W
JA
0.2
0.1
0
JA
0
25
50
75 85 100
125
150
AMBIENT TEMPERATURE (°C)
FIGURE 13. PACKAGE POWER DISSIPATION vs AMBIENT TEMPERATURE
enabled by floating or pulling the CE pin to at least 3V below
Applications Information
Product Description
the positive supply. For ±5V supply, this means that the
amplifier will be enabled when CE is 2V or less, and disabled
when CE is above 4V. Although the logic levels are not
standard TTL, this choice of logic voltages allow the EL5106
and EL5306 to be enabled by tying CE to ground, even in 5V
single supply applications. The CE pin can be driven from
CMOS outputs.
The EL5106 and EL5306 are fixed gain amplifier that offers
a wide -3dB bandwidth of 350MHz and a low supply current
of 1.5mA. They work with supply voltages ranging from a
single 5V to 12V and they are also capable of swinging to
within 1.2V of either supply on the output. These
combinations of high bandwidth and low power make the
EL5106 and EL5306 the ideal choice for many low-
power/high-bandwidth applications such as portable,
handheld, or battery-powered equipment.
Gain Setting
The EL5106 and EL5306 are built with internal feedback and
gain resistors. The internal feedback resistors have equal
value; as a result, the amplifier can be configured into gain of
+1, -1, and +2 without any external resistors. Figure 13
shows the amplifier in gain of +2 configuration. The gain
error is ±2% maximum. Figure 14 shows the amplifier in gain
of -1 configuration. For gain of +1, IN+ and IN- should be
connected together as shown in Figure 15. This
For varying bandwidth and higher gains, consider the
EL5191 with 1GHz on a 9mA supply current or the EL5162
with 300MHz on a 4mA supply current. Versions include
single, dual, and triple amp packages with 5-pin SOT-23,
16-pin QSOP, and 8-pin or 16-pin SO outlines.
configuration avoids the effects of any parasitic capacitance
on the IN- pin. Since the internal feedback and gain resistors
change with temperature and process, external resistor
should not be used to adjust the gain settings.
Power Supply Bypassing and Printed Circuit
Board Layout
As with any high frequency device, good printed circuit
board layout is necessary for optimum performance. Low
impedance ground plane construction is essential. Surface
mount components are recommended, but if leaded
components are used, lead lengths should be as short as
possible. The power supply pins must be well bypassed to
reduce the risk of oscillation. The combination of a 4.7µF
tantalum capacitor in parallel with a 0.01µF capacitor has
been shown to work well when placed at each supply pin.
325Ω
325Ω
IN-
-
IN+
+
FIGURE 14. A = +2
V
Disable/Power-Down
The EL5106 and EL5306 amplifiers can be disabled placing
their output in a high impedance state. When disabled, the
amplifier supply current is reduced to <25µA. The EL5106
and EL5306 are disabled when its CE pin is pulled up to
within 1V of the positive supply. Similarly, the amplifier is
7
EL5106, EL5306
325Ω
325Ω
325Ω
+5
IN-
-
IN+
+
325Ω
FIGURE 15. A = -1
V
-
V
OUT
+5
+
0.1µF
1K
1K
325Ω
0.1µF
IN- 325Ω
V
IN
-
+
IN+
FIGURE 17.
FIGURE 16. A = +1
V
Video Performance
Supply Voltage Range and Single-Supply
Operation
For good video performance, an amplifier is required to
maintain the same output impedance and the same
frequency response as DC levels are changed at the output.
This is especially difficult when driving a standard video load
of 150Ω, because of the change in output current with DC
level. Previously, good differential gain could only be
achieved by running high idle currents through the output
transistors (to reduce variations in output impedance).
Special circuitries have been incorporated in the EL5106 and
EL5306 to reduce the variation of output impedance with
current output. This results in dG and dP specifications of
0.02% and 0.04°, while driving 150Ω at a gain of 2.
The EL5106 and EL5306 have been designed to operate
with supply voltages having a span of greater than or equal
to 5V and less than 11V. In practical terms, this means that
the EL5106 and EL5306 will operate on dual supplies
ranging from ±2.5V to ±5V. With single-supply, the EL5106
and EL5306 will operate from 5V to 10V.
As supply voltages continue to decrease, it becomes
necessary to provide input and output voltage ranges that
can get as close as possible to the supply voltages. The
EL5106 and EL5306 have an input range which extends to
within 2V of either supply. So, for example, on ±5V supplies,
the EL5106 and EL5306 have an input range which spans
±3V. The output range is also quite large, extending to within
1V of the supply rail. On a ±5V supply, the output is therefore
capable of swinging from -4V to +4V. Single-supply output
range is larger because of the increased negative swing due
to the external pull-down resistor to ground. Figure 16 shows
an AC-coupled, gain of +2, +5V single supply circuit
configuration.
Output Drive Capability
In spite of its low 1.5mA of supply current per amplifier, the
EL5106 and EL5306 are capable of providing a maximum of
±125mA of output current.
Driving Cables and Capacitive Loads
When used as a cable driver, double termination is always
recommended for reflection-free performance. For those
applications, the back-termination series resistor will
decouple the EL5106 and EL5306 from the cable and allow
extensive capacitive drive. However, other applications may
have high capacitive loads without a back-termination
resistor. In these applications, a small series resistor (usually
between 5Ω and 50Ω) can be placed in series with the
output to eliminate most peaking.
8
EL5106, EL5306
where:
Current Limiting
The EL5106 and EL5306 have no internal current-limiting
circuitry. If the output is shorted, it is possible to exceed the
Absolute Maximum Rating for output current or power
dissipation, potentially resulting in the destruction of the
device.
T
= Maximum ambient temperature
MAX
θ
= Thermal resistance of the package
JA
n = Number of amplifiers in the package
PD = Maximum power dissipation of each amplifier in
MAX
the package
Power Dissipation
With the high output drive capability of the EL5106 and
EL5306, it is possible to exceed the 125°C Absolute
Maximum junction temperature under certain very high load
PD
for each amplifier can be calculated as follows:
MAX
V
OUTMAX
R
L
----------------------------
PD
= (2 × V × I
) + (V - V ) ×
OUTMAX
MAX
S
SMAX
S
current conditions. Generally speaking when R falls below
L
about 25Ω, it is important to calculate the maximum junction
temperature (T
) for the application to determine if
JMAX
where:
power supply voltages, load conditions, or package type
need to be modified for the EL5106 and EL5306 to remain in
the safe operating area. These parameters are calculated as
follows:
V
= Supply voltage
S
I
= Maximum bias supply current
SMAX
V
= Maximum output voltage (required)
OUTMAX
T
= T
+ (θ × n × PD
)
MAX
JMAX
MAX
JA
R = Load resistance
L
SO Package Outline Drawing
9
EL5106, EL5306
SOT-23 Package Outline Drawing
10
EL5106, EL5306
QSOP Package Outline Drawing
NOTE: The package drawings shown here may not be the latest versions. To check the latest revision, please refer to the Intersil website at
http://www.intersil.com/design/packages/index.asp
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
11
相关型号:
EL5106IWZ
1 CHANNEL, VIDEO AMPLIFIER, PDSO6, ROHS COMPLIANT, PLASTIC, MO-178AA, SOT-23, 6 PIN
RENESAS
©2020 ICPDF网 联系我们和版权申明