PEB22522FV21 [INFINEON]
MULTI BIT RATE INTEGRATED CIRCUIT; 多比特率集成电路
| 型号： | PEB22522FV21 |
| 厂家： | 
Infineon |
| 描述： | MULTI BIT RATE INTEGRATED CIRCUIT |
| 文件： | 总2页 (文件大小：551K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3URGXFWꢀ%ULHI
0X%,& ꢁ
3(%ꢀꢁꢁꢂꢁꢁꢀ9ꢁꢃꢄ
0XOWLꢀ%LWꢀ5DWHꢀ,QWHJUDWHGꢀ&LUFXLW
MDSL (Medium bit rate Digital
Subscriber Line) covers the sub
SDSL (Symmetric/Single Pair bit
rate DSL) rates at a granularity of
8 kbit/s. The MuBIC 2 is the 2nd
generation of the Infineon MDSL
product family which fills the gap
between ISDN and SDSL.
Using the TC-PAM coding scheme
power consumption of less than
500 mW at 1 Mbit/s meets
manufacturers requirements for
the MuBIC 2 offers an excellent
transmission performance in
combination with a very low
interference with other services
like POTS, ISDN, HDSL, ADSL,
ADSL Lite and VDSL in the same
bundle. The exceptional low
remote fed equipment e.g. for life
SDSL
line service. The tiny TQFP-100
package contains a lot of
additional functionality like
framer and microcontroller.
Potential Applications
Features
ꢀ Inputs and Outputs TTL level
ꢀ Software access to D-Bits
ꢀ N-channel DAML systems
ꢀ Fractional T1/E1 systems
ꢀ Broadband subscriber access
for voice and data
ꢀ Line cards for central office and
loop carriers
ꢀ Network terminators (NTs)
ꢀ DSLAMs
ꢀ ISDN H0 transport
ꢀ Remote LAN Access (Home
office)
ꢀ Videoconferencing
ꢀ Access to cellular base stations
ꢀ RITL and WLL systems
ꢀ SDH and SONET termination
ꢀ Leased line services
ꢀ Single chip MDSL transceiver
ꢀ Plastic TQFP-100 package
ꢀ Central office (COT) and remote
(RT) operation (master/slave)
ꢀ Typical 450 mW power con-
ꢀ Warmstart capability
ꢀ Power down mode
sumption at 1 Mbit/s
ꢀ TC-PAM linecode with 2,3 or 4
Bits/symbol
ꢀ 1.544 Mbit/s, 2 Mbit/s and
4 Mbit/s TDM interface
ꢀ Transmission of any bit rate
between 512 kbit/s and
1040 kbit/s1)
ꢀ Tolerates input jitter according
to I.431 jitter transfer function
ꢀ Same hardware for all bit rates
ꢀ Easy software download
ꢀ Diagnostic loop backs
ꢀ Meets ETSI/ANSI HDSL and
ISDN performance
ꢀ DECT base station synchroni-
ꢀ Embedded µC for easy start-up
ꢀ Universal 8-Bit µC interface
zation and delay measurement
ꢀ 2B1Q mode
ꢀ Transparent transmission or
ꢀ Operation speed selectable by
ꢀ Frame Relay services
ꢀ PBX trunk lines
software only
ꢀ JTAG boundary scan
built-in Framer
1)
Bit rates below 512 kbit/s on request
http://www.infineon.com
MuBIC 2
Block Diagram
A
HK
I
ꢀ
AUS
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
IND
IRL
J
B
ꢀ
BR
ꢀ
Development and Support Tools
ꢀ Evaluation board
CDN
N
ꢀ
NL
P
Documentation
CH
ꢀ
D
Type
Date of Issue/Version
ꢀ
PEB 22521/2 V2.1 Preliminary Data Sheet 10.99
PL
RC
ROK
RUS
ꢀꢀ
ꢀ
Ordering information
ꢀꢀ
Type
Ordering Code
Q67233-H1151
Package
Availability
ꢀ
DK
PEB 22522F V2.1
P-TQFP-100 ES
ꢀ
E
S
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
F
SGP
TR
ꢀ
FIN
ꢀ
GB
Application Example DAML
USA
ZA
ꢀ
GR
ꢀ
How to reach us:
http://www.infineon.com
© Infineon Technologies AG 1999.
All Rights Reserved.
Please note that any information contained in this
publication may be subject to change. Infineon
Technologies reserves the right to make changes
to or to discontinue any product or service identi-
fied in this publication without notice.
Please contact our regional offices to receive the
latest version of the relevant information to verify,
before placing orders, that the information being
relied upon is current.
All brand or product names, hardware or software
names are trademarks of their respective compa-
nies or organizations.
Published by
Ordering No. B115-H7325-X-X-7600
Printed in Germany
Infineon Technologies AG
PS 10985.
相关型号：
PEB2256EV1.2
PCM Jitter Attenuator, 1-Func, CEPT PCM-30/E-1, CMOS, PBGA81, 10 X 10 MM, 1 MM PITCH, PLASTIC, LBGA-81
INFINEON
PEB2256HT
E1/T1/J1 Framer and Line Interface Component for Long and Short Haul Applications
INFINEON
PEB2256HV1.2
Digital Transmission Interface, 1-Func, CEPT PCM-30/E-1, CMOS, PQFP80, 14 X 14 MM, 0.50 MM PITCH, PLASTIC, MQFP-80
INFINEON
©2020 ICPDF网 联系我们和版权申明