BFP840FESD [INFINEON]
BFP840FESD 是一款分立射频异质结双极晶体管 (HBT),集成静电放电保护,适用于 5 GHz 频带应用。;型号: | BFP840FESD |
厂家: | Infineon |
描述: | BFP840FESD 是一款分立射频异质结双极晶体管 (HBT),集成静电放电保护,适用于 5 GHz 频带应用。 射频 晶体管 |
文件: | 总22页 (文件大小:464K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
BFP840FESD
SiGe:C NPN RF bipolar transistor
Product description
The BFP840FESD is a discrete RF heterojunction bipolar transistor (HBT) with an
integrated ESD protection suitable for 5 GHz band applications.
Feature list
•
Unique combination of high end RF performance and robustness: 20 dBm maximum RF input power,
1.5 kV HBM ESD hardness
•
High transition frequency fT = 85 GHz to enable best in class noise performance at high frequencies:
NFmin = 0.75 dB at 5.5 GHz, 1.8 V, 5 mA
•
•
•
High gain Gms = 23 dB at 5.5 GHz, 1.8 V, 10 mA
OIP3 = 22 dBm at 5.5 GHz, 1.8 V, 10 mA
Suitable for low voltage applications e.g. VCC = 1.2 V and 1.8 V (2.85 V, 3.3 V, 3.6 V require a corresponding
collector resistor)
Product validation
Qualified for industrial applications according to the relevant tests of JEDEC47/20/22.
Potential applications
•
•
WLAN, WiMAX and UWB
Satellite communication systems: satellite radio (SDARs, DAB), navigation systems (e.g. GPS, GLONASS,
BeiDou, Galileo)
Device information
Table 1
Part information
Product name / Ordering code
Package
Pin configuration
Marking
Pieces / Reel
BFP840FESD / BFP840FESDH6327XTSA1 TSFP-4-1
1 = B 2 = E 3 = C 4 = E T8s
3000
Attention: ESD (Electrostatic discharge) sensitive device, observe handling precautions
Datasheet
www.infineon.com
Please read the Important Notice and Warnings at the end of this document
v2.0
2018-09-26
BFP840FESD
SiGe:C NPN RF bipolar transistor
Table of contents
Table of contents
Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Feature list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Product validation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Potential applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Device information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Thermal characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1
2
3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
DC characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
General AC characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Frequency dependent AC characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Characteristic DC diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Characteristic AC diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.1
3.2
3.3
3.4
3.5
4
Package information TSFP-4-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Datasheet
2
v2.0
2018-09-26
BFP840FESD
SiGe:C NPN RF bipolar transistor
Absolute maximum ratings
1
Absolute maximum ratings
Table 2
Absolute maximum ratings at TA = 25 °C (unless otherwise specified)
Parameter
Symbol
Values
Min. Max.
2.25
Unit Note or test condition
Collector emitter voltage
Collector base voltage 1)
Collector emitter voltage 2)
VCEO
–
V
Open base
2.0
2.9
2.6
2.25
2.0
TA = -55°C, open base
Open emitter
VCBO
TA = -55°C, open emitter
E-B short circuited
VCES
TA = -55°C,
E-B short circuited
Base current
IB
-5
–
3
mA
–
Collector current
RF input power
ESD stress pulse
IC
35
20
1.5
PRFin
VESD
–
dBm
kV
-1.5
HBM, all pins, acc. to
JESD22-A114
Total power dissipation 3)
Junction temperature
Storage temperature
Ptot
TJ
–
75
mW TS ≤ 109 °C
°C
–
150
–
TStg
-55
Attention: Stresses above the max. values listed here may cause permanent damage to the device.
Exposure to absolute maximum rating conditions for extended periods may affect device
reliability. Exceeding only one of these values may cause irreversible damage to the integrated
circuit.
1
VCBO is similar to VCEO due to design.
VCES is similar to VCEO due to design.
TS is the soldering point temperature. TS is measured on the emitter lead at the soldering point of the PCB.
2
3
Datasheet
3
v2.0
2018-09-26
BFP840FESD
SiGe:C NPN RF bipolar transistor
Thermal characteristics
2
Thermal characteristics
Table 3
Thermal resistance
Parameter
Symbol
Values
Unit Note or test condition
Min. Typ. Max.
Junction - soldering point
RthJS
–
541
–
K/W
–
80
70
60
50
40
30
20
10
0
0
25
50
75
S [°C]
100
125
150
T
Figure 1
Total power dissipation Ptot = f(TS)
Datasheet
4
v2.0
2018-09-26
BFP840FESD
SiGe:C NPN RF bipolar transistor
Electrical characteristics
3
Electrical characteristics
3.1
DC characteristics
Table 4
DC characteristics at TA = 25 °C
Parameter
Symbol
Values
Unit Note or test condition
Min. Typ. Max.
Collector emitter breakdown voltage
Collector emitter leakage current
Collector base leakage current
Emitter base leakage current
DC current gain
V(BR)CEO 2.25 2.6
–
V
IC = 1 mA, IB = 0,
open base
ICES
ICBO
IEBO
hFE
–
–
400 1) nA
400 1)
VCE = 1.5 V, VBE = 0,
E-B short circuited
VCB = 1.5 V, IE = 0,
open emitter
10 1) μA
450
VEB = 0.5 V, IC = 0,
open collector
150
260
VCE = 1.8 V, IC = 10 mA,
pulse measured
3.2
General AC characteristics
Table 5
General AC characteristics at TA = 25 °C
Parameter
Symbol
Values
Unit Note or test condition
Min. Typ. Max.
Transition frequency
fT
–
85
–
GHz VCE = 1.8 V, IC = 25 mA,
f = 2 GHz
Collector base capacitance
CCB
38
fF
VCB = 1.8 V, VBE = 0,
f = 1 MHz,
emitter grounded
Collector emitter capacitance
Emitter base capacitance
CCE
0.37
0.37
pF
VCE = 1.8 V, VBE = 0,
f = 1 MHz,
base grounded
CEB
VEB = 0.4 V, VCB = 0,
f = 1 MHz,
collector grounded
1
Maximum values not limited by the device but by the short cycle time of the 100% test
Datasheet
5
v2.0
2018-09-26
BFP840FESD
SiGe:C NPN RF bipolar transistor
Electrical characteristics
3.3
Frequency dependent AC characteristics
Measurement setup is a test fixture with Bias-T’s in a 50 Ω system, TA = 25 °C.
VC
Top View
Bias-T
OUT
C
E
E
VB
B
(Pin 1)
Bias-T
IN
Figure 2
Testing circuit
AC characteristics, VCE = 1.8 V, f = 0.45 GHz
Table 6
Parameter
Symbol
Values
Min. Typ. Max.
Unit Note or test condition
Power gain
–
–
dB
•
•
Maximum power gain
Transducer gain
Gms
|S21|2
35
28
IC = 10 mA
Noise figure
dB
•
•
Minimum noise figure
Associated gain
NFmin
Gass
0.55
27
IC = 5 mA
Linearity
dBm
ZS = ZL = 50 Ω, IC = 10 mA
•
•
3rd order intercept point at output
1 dB gain compression point at output OP1dB
OIP3
19.5
4
Datasheet
6
v2.0
2018-09-26
BFP840FESD
SiGe:C NPN RF bipolar transistor
Electrical characteristics
Table 7
AC characteristics, VCE = 1.8 V, f = 0.9 GHz
Parameter
Symbol
Values
Unit Note or test condition
Min. Typ. Max.
Power gain
–
–
dB
•
•
Maximum power gain
Transducer gain
Gms
|S21|2
31
27
IC = 10 mA
Noise figure
dB
•
•
Minimum noise figure
Associated gain
NFmin
Gass
0.6
26.5
IC = 5 mA
Linearity
dBm
ZS = ZL = 50 Ω, IC = 10 mA
•
•
3rd order intercept point at output
1 dB gain compression point at output OP1dB
OIP3
19.5
4
Table 8
AC characteristics, VCE = 1.8 V, f = 1.5 GHz
Parameter
Symbol
Values
Unit Note or test condition
Min. Typ. Max.
Power gain
–
–
dB
•
•
Maximum power gain
Transducer gain
Gms
|S21|2
28.5
26
IC = 10 mA
Noise figure
dB
•
•
Minimum noise figure
Associated gain
NFmin
Gass
0.6
25
IC = 5 mA
Linearity
dBm
ZS = ZL = 50 Ω, IC = 10 mA
•
•
3rd order intercept point at output
1 dB gain compression point at output OP1dB
OIP3
20
4
Table 9
AC characteristics, VCE = 1.8 V, f = 1.9 GHz
Parameter
Symbol
Values
Unit Note or test condition
Min. Typ. Max.
Power gain
–
–
dB
•
•
Maximum power gain
Transducer gain
Gms
|S21|2
27.5
25.5
IC = 10 mA
Noise figure
dB
•
•
Minimum noise figure
Associated gain
NFmin
Gass
0.65
24
IC = 5 mA
Linearity
dBm
ZS = ZL = 50 Ω, IC = 10 mA
•
•
3rd order intercept point at output
1 dB gain compression point at output OP1dB
OIP3
21
4.5
Datasheet
7
v2.0
2018-09-26
BFP840FESD
SiGe:C NPN RF bipolar transistor
Electrical characteristics
Table 10
AC characteristics, VCE = 1.8 V, f = 2.4 GHz
Parameter
Symbol
Values
Unit Note or test condition
Min. Typ. Max.
Power gain
–
–
dB
•
•
Maximum power gain
Transducer gain
Gms
|S21|2
26.5
24
IC = 10 mA
Noise figure
dB
•
•
Minimum noise figure
Associated gain
NFmin
Gass
0.65
22.5
IC = 5 mA
Linearity
dBm
ZS = ZL = 50 Ω, IC = 10 mA
•
•
3rd order intercept point at output
1 dB gain compression point at output OP1dB
OIP3
21
4
Table 11
AC characteristics, VCE = 1.8 V, f = 3.5 GHz
Parameter
Symbol
Values
Unit Note or test condition
Min. Typ. Max.
Power gain
–
–
dB
•
•
Maximum power gain
Transducer gain
Gms
|S21|2
25
22
IC = 10 mA
Noise figure
dB
•
•
Minimum noise figure
Associated gain
NFmin
Gass
0.7
20.5
IC = 5 mA
Linearity
dBm
ZS = ZL = 50 Ω, IC = 10 mA
•
•
3rd order intercept point at output
1 dB gain compression point at output OP1dB
OIP3
22.5
5
Table 12
AC characteristics, VCE = 1.8 V, f = 5.5 GHz
Parameter
Symbol
Values
Unit Note or test condition
Min. Typ. Max.
Power gain
–
–
dB
•
•
Maximum power gain
Transducer gain
Gms
|S21|2
23
19
IC = 10 mA
Noise figure
dB
•
•
Minimum noise figure
Associated gain
NFmin
Gass
0.75
17.5
IC = 5 mA
Linearity
dBm
ZS = ZL = 50 Ω, IC = 10 mA
•
•
3rd order intercept point at output
1 dB gain compression point at output OP1dB
OIP3
22
5
Datasheet
8
v2.0
2018-09-26
BFP840FESD
SiGe:C NPN RF bipolar transistor
Electrical characteristics
Table 13
AC characteristics, VCE = 1.8 V, f = 10 GHz
Parameter
Symbol
Values
Unit Note or test condition
Min. Typ. Max.
Power gain
–
–
dB
•
•
Maximum power gain
Transducer gain
Gma
|S21|2
16
13
IC = 10 mA
Noise figure
dB
•
•
Minimum noise figure
Associated gain
NFmin
Gass
1.1
13
IC = 5 mA
Linearity
dBm
ZS = ZL = 50 Ω, IC = 10 mA
•
•
3rd order intercept point at output
1 dB gain compression point at output OP1dB
OIP3
19.5
3
Table 14
AC characteristics, VCE = 1.8 V, f = 12 GHz
Parameter
Symbol
Values
Unit Note or test condition
Min. Typ. Max.
Power gain
–
–
dB
•
•
Maximum power gain
Transducer gain
Gma
|S21|2
15.5
10.5
IC = 10 mA
Noise figure
dB
•
•
Minimum noise figure
Associated gain
NFmin
Gass
1.3
10.5
IC = 5 mA
Linearity
dBm
ZS = ZL = 50 Ω, IC = 10 mA
•
•
3rd order intercept point at output
1 dB gain compression point at output OP1dB
OIP3
18.5
1.5
Note:
Gms = IS21 / S12I for k < 1; Gma = IS21 / S12 I(k-(k2-1)1/2) for k > 1. In order to get the NFmin values stated in
this chapter, the test fixture losses have been subtracted from all measured results. OIP3 value
depends on termination of all intermodulation frequency components. Termination used for this
measurement is 50 Ω from 0.2 MHz to 12 GHz.
Datasheet
9
v2.0
2018-09-26
BFP840FESD
SiGe:C NPN RF bipolar transistor
Electrical characteristics
3.4
Characteristic DC diagrams
18
16
14
12
10
8
IB = 70µA
IB = 60µA
IB = 50µA
IB = 40µA
IB = 30µA
IB = 20µA
IB = 10µA
6
4
2
0
0
0.5
1
1.5
2
2.5
3
VCE [V]
Figure 3
Collector current vs. collector emitter voltage IC = f(VCE), IB = parameter
103
102
10−2
10−1
100
101
102
IC [mA]
Figure 4
DC current gain hFE = f(IC), VCE = 1.8 V
Datasheet
10
v2.0
2018-09-26
BFP840FESD
SiGe:C NPN RF bipolar transistor
Electrical characteristics
102
101
100
10−1
10−2
10−3
10−4
10−5
0.5
0.6
0.7
0.8
0.9
VBE [V]
Figure 5
Collector current vs. base emitter forward voltage IC = f(VBE), VCE = 1.8 V
100
10−1
10−2
10−3
10−4
10−5
10−6
10−7
0.5
0.6
0.7
0.8
0.9
VB [V]
Figure 6
Base current vs. base emitter forward voltage IB = f(VBE), VCE = 1.8 V
Datasheet
11
v2.0
2018-09-26
BFP840FESD
SiGe:C NPN RF bipolar transistor
Electrical characteristics
10−6
10−7
10−8
10−9
10−10
10−11
0.3
0.4
0.5
0.6
0.7
VEB[ V ]
Figure 7
Base current vs. base emitter reverse voltage IB = f(VEB), VCE = 1.8 V
Datasheet
12
v2.0
2018-09-26
BFP840FESD
SiGe:C NPN RF bipolar transistor
Electrical characteristics
3.5
Characteristic AC diagrams
85
80
75
70
65
60
55
50
45
40
35
30
25
20
15
10
5
2.00V
1.80V
1.50V
1.00V
0.50V
0
0
5
10
15
20
25
30
35
40
45
IC [mA]
Figure 8
Transition frequency fT = f(IC), f = 2 GHz, VCE = parameter
25
20
15
10
1.5V, 2400MHz
1.8V, 2400MHz
1.5V, 5500MHz
1.8V, 5500MHz
5
0
0
5
10
15
20
25
30
IC [mA]
Figure 9
3rd order intercept point at output OIP3 = f(IC), ZS = ZL= 50 Ω, VCE, f = parameter
Datasheet
13
v2.0
2018-09-26
BFP840FESD
SiGe:C NPN RF bipolar transistor
Electrical characteristics
25
20
15
10
20
22
20
19
5
1
1.2
1.4
1.6
1.8
2
VCE [V]
Figure 10
3rd order intercept point at output OIP3 [dBm] = f(IC, VCE), ZS = ZL= 50 Ω, f = 5.5 GHz
25
20
15
10
2
2
1
0
−1
−1
1.4
−1
5
1
1.2
1.6
1.8
2
VCE [V]
Figure 11
Compression point at output OP1dB [dBm] = f(IC, VCE), ZS = ZL= 50 Ω, f = 5.5 GHz
Datasheet
14
v2.0
2018-09-26
BFP840FESD
SiGe:C NPN RF bipolar transistor
Electrical characteristics
0.05
0.045
0.04
0.035
0.03
0
0.2 0.4 0.6 0.8
1
1.2 1.4 1.6 1.8
2
VCB [V]
Figure 12
Collector base capacitance CCB = f(VCB), f = 1 MHz
40
35
30
Gms
25
Gma
20
|S21|2
15
10
5
0
1
2
3
4
5
6
7
8
9
10 11 12
f [GHz]
Figure 13
Gain Gma, Gms, IS21I2 = f(f), VCE = 1.8 V, IC = 10 mA
Datasheet
15
v2.0
2018-09-26
BFP840FESD
SiGe:C NPN RF bipolar transistor
Electrical characteristics
40
35
30
25
20
15
10
0.45GHz
0.9GHz
1.5GHz
1.9GHz
2.4GHz
3.5GHz
5.5GHz
10.0GHz
12.0GHz
0
5
10
15
20
25
30
35
40
45
IC [mA]
Figure 14
Maximum power gain Gmax = f(IC), VCE = 1.8 V, f = parameter in GHz
39
36
0.45GHz
33
0.9GHz
30
1.5GHz
1.9GHz
2.4GHz
27
3.5GHz
5.5GHz
24
21
18
15
12
9
10GHz
12GHz
0
0.5
1
1.5
2
2.5
VCE [V]
Figure 15
Maximum power gain Gmax = f(VCE), IC = 10 mA, f = parameter in GHz
Datasheet
16
v2.0
2018-09-26
BFP840FESD
SiGe:C NPN RF bipolar transistor
Electrical characteristics
1
1.5
0.5
0.4
2
3
12.0
11.0
0.3
12.0
4
0.2
5
11.0
10.0
9.0
10.0
9.0
0.03 to 12 GHz
0.1
10
8.0
7.0
0.1 0.2 0.3 0.4 0.5
1
1.5
2
3
4 5
0
0.03
0.03
6.0
5.0
4.0
8.0
−0.1
7.0
−10
6.0
−0.2
−5
−4
3.0
1.0
5.0
1.0
2.0
−0.3
5.0mA
10mA
15mA
−3
4.0
2.0
3.0
−0.4
−0.5
−2
−1.5
−1
Figure 16
Input reflection coefficient S11 = f(f), VCE = 1.8 V, IC = 5 / 10 / 15 mA
1
1.5
0.5
2
0.4
3
0.3
4
0.2
5
3.5
5.5
5.5
2.4
1.9
1.5
0.1
10
0.9
4
8.0
0.5
5
2.4
3.5
0.1 0.2 0.3 0.4 0.5
10.0
1
1.5
1.5
2
0.5
3
5.5
0
8.0
−0.1
−10
10.0
12.0
12.0
−0.2
−5
−4
−0.3
−3
5mA
−0.4
10mA
15mA
−0.5
−2
−1.5
−1
Figure 17
Source impedance for minimum noise figure ZS,opt = f(f), VCE = 1.8 V, IC = 5 / 10 / 15 mA
Datasheet
17
v2.0
2018-09-26
BFP840FESD
SiGe:C NPN RF bipolar transistor
Electrical characteristics
1
1.5
0.5
0.4
2
3
0.3
4
12.0
0.2
5
12.0
11.0
0.03 to 12 GHz
11.0
0.1
0
10
10.0
10.0
0.1 0.2 0.3 0.4 0.5
9.0
1
1.5
2
3
4
5
9.0
0.03
8.0
7.0
6.0
5.0
−0.1
−10
8.0
1.0
7.0
−0.2
−5
4.0
4.0
1.0
3.0
−4
2.0
6.0
−0.3
5.0mA
10mA
15mA
5.0
−3
2.0
3.0
−0.4
−0.5
−2
−1.5
−1
Figure 18
Output reflection coefficient S22 = f(f), VCE = 1.8 V, IC = 5 / 10 / 15 mA
2
1.8
1.6
1.4
1.2
1
0.8
0.6
0.4
IC = 15mA
IC = 10mA
IC = 5mA
0.2
0
0
2
4
6
8
10
12
f [GHz]
Figure 19
Noise figure NFmin = f(f), VCE = 1.8 V, ZS = ZS,opt, IC = 5 / 10 / 15 mA
Datasheet
18
v2.0
2018-09-26
BFP840FESD
SiGe:C NPN RF bipolar transistor
Electrical characteristics
2.2
2
f = 12GHz
f = 10GHz
f = 5.5GHz
f = 3.5GHz
f = 2.4GHz
f = 0.9GHz
1.8
1.6
1.4
1.2
1
0.8
0.6
0.4
0.2
0
0
5
10
15
20
IC [mA]
Figure 20
Noise figure NFmin = f(IC), VCE = 1.8 V, ZS = ZS,opt, f = parameter in GHz
3.6
3.4
3.2
3
2.8
2.6
2.4
2.2
f = 12GHz
f = 10GHz
f = 5.5GHz
f = 3.5GHz
f = 2.4GHz
f = 0.9GHz
2
1.8
1.6
1.4
1.2
1
0.8
0.6
0.4
0.2
0
0
5
10
15
20
IC [mA]
Figure 21
Noise figure NF50 = f(IC), VCE = 1.8 V, ZS = 50 Ω, f = parameter in GHz
Note:
The curves shown in this chapter have been generated using typical devices but shall not be
considered as a guarantee that all devices have identical characteristic curves. TA = 25 °C.
Datasheet
19
v2.0
2018-09-26
BFP840FESD
SiGe:C NPN RF bipolar transistor
Package information TSFP-4-1
4
Package information TSFP-4-1
Figure 22
Package outline
Figure 23
Figure 24
Foot print
Marking layout example
Figure 25
Tape dimensions
Datasheet
20
v2.0
2018-09-26
BFP840FESD
SiGe:C NPN RF bipolar transistor
Revision history
Revision history
Document
version
Date of
release
Description of changes
2.0
2018-09-26
New datasheet layout.
Datasheet
21
v2.0
2018-09-26
Trademarks
All referenced product or service names and trademarks are the property of their respective owners.
Edition 2018-09-26
Published by
IMPORTANT NOTICE
WARNINGS
The information given in this document shall in no
event be regarded as a guarantee of conditions or
characteristics (“Beschaffenheitsgarantie”) .
With respect to any examples, hints or any typical values
stated herein and/or any information regarding the
application of the product, Infineon Technologies
hereby disclaims any and all warranties and liabilities of
any kind, including without limitation warranties of
non-infringement of intellectual property rights of any
third party.
In addition, any information given in this document is
subject to customer’s compliance with its obligations
stated in this document and any applicable legal
requirements, norms and standards concerning
customer’s products and any use of the product of
Infineon Technologies in customer’s applications.
Due to technical requirements products may contain
dangerous substances. For information on the types
in question please contact your nearest Infineon
Technologies office.
Except as otherwise explicitly approved by Infineon
Technologies in a written document signed by
authorized representatives of Infineon Technologies,
Infineon Technologies’ products may not be used in
any applications where a failure of the product or
any consequences of the use thereof can reasonably
be expected to result in personal injury
Infineon Technologies AG
81726 Munich, Germany
©
2018 Infineon Technologies AG
All Rights Reserved.
Do you have a question about any
aspect of this document?
Email: erratum@infineon.com
Document reference
IFX-gse1516184165320
The data contained in this document is exclusively
intended for technically trained staff. It is the
responsibility of customer’s technical departments to
evaluate the suitability of the product for the intended
application and the completeness of the product
information given in this document with respect to such
application.
相关型号:
BFP840FESDH6327XTSA1
RF Small Signal Bipolar Transistor, 0.035A I(C), 1-Element, KA Band, Silicon Germanium Carbon, NPN, HALOGEN FREE AND ROHS COMPLIANT, TSFP-4
INFINEON
BFP92-GS08
RF Small Signal Bipolar Transistor, 0.03A I(C), 1-Element, Ultra High Frequency Band, Silicon, NPN, ROHS COMPLIANT, PLASTIC PACKAGE-4
VISHAY
BFP92A-GS08
RF Small Signal Bipolar Transistor, 0.03A I(C), 1-Element, Ultra High Frequency Band, Silicon, NPN,
TEMIC
BFP92A-GS18
RF Small Signal Bipolar Transistor, 0.03A I(C), 1-Element, Ultra High Frequency Band, Silicon, NPN, PLASTIC PACKAGE-4
TEMIC
©2020 ICPDF网 联系我们和版权申明