5962-9462601 [INFINEON]
HYBRID-HIGH RELIABILITY DC/DC CONVERTERS; 混合高可靠性DC / DC转换器型号: | 5962-9462601 |
厂家: | Infineon |
描述: | HYBRID-HIGH RELIABILITY DC/DC CONVERTERS |
文件: | 总12页 (文件大小:98K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PD - 94549A
ATR28XXS SERIES
28V Input, Single Output
HYBRID-HIGH RELIABILITY
DC/DC CONVERTERS
Description
The ATR28XXS Series of DC/DC converters feature
high power density and an extended temperature range
for use in military and industrial applications. Designed
to MIL-STD-704D input requirements, these devices
have nominal 28VDC inputs with 3.3V, 5V, 12V and
15V single outputs to satisfy a wide range of requirements.
The circuit design incorporates a pulse width
modulated single forward topology operating in the
feed-forward mode at a nominal switching frequency
of 550KHz. Input to output isolation is achieved through
the use of transformers in the forward and feedback
circuits.
ATR
Features
n 16 to 40 VDC Input Range (28 VDC Nominal)
n 3.3V, 5V, 12V and 15V Outputs Available
n Indefinite Short Circuit and Overload
Protection
n Up to 35 W/in3 Power Density
n 30 Watt Output Power Models
n Fast Loop Response for Superior Transient
Characteristics
The advanced feedback design provides fast loop
response for superior line and load transient characteristics
and offers greater reliability and radiation tolerance
than devices incorporating optical feedback circuits.
n Operating Temperature Range from -55°C to
+125°C
n Popular Industry Standard Pin-Out
n Resistance Seam Welded Case for Superior
Long Term Hermeticity
Three standard temperature grades are offered with
screening options. Refer to Part Number section. These
devices can be provided in a standard plug-in package
for PC mounting or in a flanged package for more
severe environments.
n Ceramic Feed-thru Pins
n External Synchronization
n Efficiencies up to 84%
n Shutdown from External Signal
n Military Screening
These converters are manufactured in a facility certified
to MIL-PRF-38534. All processes used to manufacture
these converters have been qualified to enable
Advanced Analog to deliver compliant devices.
Four screening grades are available to satisfy a wide
range of requirements. The CH grade converters are
fully compliant to MIL-PRF-38534 for class H. The HB
grade converters are processed to full class H screening
but do not have class H element evaluation as required
by MIL-PRF-38534. Both grades are fully tested to
confirm operation over the full military temperature
range without derating of output power. The ES version
is a full temperature device without the full class H or
element evaluation. The non-suffix device is a low cost
limited temperature range option. Variations in electrical,
mechanical and screening can be accommodated.
Extensive computer simulation using complex
modeling enables rapid design modification to
be provided. Contact IR Santa Clara with specific
requirements.
www.irf.com
1
04/01/04
ATR28XXS Series
Specifications
ATR2803R3S
ABSOLUTE MAXIMUM RATINGS
Input Voltage
-0.5V to 50V
Soldering Temperature
Case Temperature
300°C for 10 seconds
Operating -55°C to +125°C
Storage -65°C to +135°C
Table I. Electrical performance Characteristics
Test
Symbol
Conditions
Group A
Device
Types
Limits
Units
Subgroups
-55°C ≤ TC ≤ +125°C
IN = 28VDC ±5%, CL = 0
Unless otherwise specified
V
Min
Max
Output voltage
VOUT
IOUT = 0
1
01
3.25
3.20
3.35
3.40
7500
V
2,3
1
IOUT
VRIP
VIN = 16, 28, and 40 VDC
1,2,3
01
01
mA
Output current
2
VIN = 16, 28, and 40 VDC
B.W. = 20Hz to 2 MHz
VIN = 16, 28, and 40 VDC
1,2,3
60
mV p-p
Output ripple voltage
3
VRLINE
1
01
mV
±20
Line regulation
I
OUT = 0, 3000, and 6000mA
2,3
±30
±50
3
VRLOAD
IIN
VIN = 16,28, and 40 VDC
IOUT = 0, 3000, and 6000mA
IOUT = 0, inhibit (pin 2)
Tied to input return (pin 10)
IOUT = 0, inhibit (pin 2) = open
IOUT =6000mA
1,2,3
01
01
mV
mA
Load regulation
Input current
1,2,3
1,2,3
18
50
50
2
IRIP
EFF
01
01
01
mA p-p
%
Input ripple current
B.W. = 20Hz to 2 MHz
IOUT =6000mA
Efficiency
Isolation
1
2,3
1
74
70
ISO
Input to output or any pin
to case (except pin 8) at
500 VDC, TC =+25°C
No effect on dc performance
TC =+25°C
100
MΩ
µF
W
4, 5
CL
PD
4
1
01
01
500
12
Capacitive load
6
Power dissipation
load fault
Overload, TC = +25°C
Short Circuit
1,2,3
4,5,6
4,5,6
4,5,6
4,5,6
4
9
Switching frequency
FS
IOUT = 7500mA
01
01
01
500
500
600
700
+500
+500
100
200
100
200
±500
KHz
KHz
Sync frequency range
Output response to step
FSYNC
IOUT = 7500mA
VOTLOAD
Load step 50% to/from 100%
Load step 50% to/from 100%
Load step 50% to/from 100%
-500
-500
mV pk
7
transient load changes
Recovery time step
TTLOAD
7, 8
5,6
01
01
transient load changes
µ
s
Load step 50% to/from 100%
4
5,6
Output response to transient
5, 9
step line changes
VOTLINE
Input step 16V to/from
40VDC, IOUT = 7500mA
4,5,6
mV pk
For Notes to Specifications, refer to page 3
2
www.irf.com
ATR28XXS Series
ATR2803R3S
Table I. Electrical performance Characteristics - continued
Symbol
Conditions
Group A
Device
Limits
Units
Subgroups Types
-55°C ≤ TC≤ +125°C
V = 28VDC±5%, CL = 0
IN
Min
Max
Unlessotherwisespecified
Recovery time transient step
5, 8, 9
line changes
TTLINE
Input step 16V to/from
40VDC, IOUT = 7500mA
4,5,6
01
10
ms
Turn on overshoot
10
Turn on delay
VTonOS IOUT = 10% to 100% of Load
TonD IOUT =0 and 7500mA
TrLF
4,5,6
4,5,6
01
01
350
25
mV pk
ms
5, 10
4,5,6
01
25
ms
Load fault recovery
Notes to Specifications
1
2
3
4
Parameter guaranteed by line and load regulation tests.
Bandwidth guaranteed by design. Tested for 20 KHz to 2 MHz.
Output voltage measured at load with remote sense leads connected across load.
Capacitive load may be any value from 0 to the maximum limit without compromising dc performance. A capacitive load in excess of
the maximum limit will not disturb loop stability but may interfere with the operation of the load fault detection circuitry, appearing
as a short circuit during turn on.
5
6
Parameter shall be tested as part of design characterization and after design or process changes. Thereafter parameters shall be
guaranteed to the limits specified in table I.
An overload is that condition with a load in excess of the rated load but less than that necessary to trigger the short circuit
protection and is the condition of maximum power dissipation.
7
8
Load step transition time between 2 and 10 microseconds.
Recovery time is measured from the initiation of the transient to where VOUT has returned to within ±1 percent of VOUT at 50 percent
load.
9
Input step transition time between 2 and 10 microseconds.
10 Turn on delay time measurement is for either a step application of power at the input or the removal of a ground signal from the
inhibit pin (pin 2) while power is applied to the input.
www.irf.com
3
ATR28XXS Series
Specifications
ATR2805S
ABSOLUTE MAXIMUM RATINGS
Input Voltage
-0.5V to 50V
Soldering Temperature
Case Temperature
300°C for 10 seconds
Operating -55°C to +125°C
Storage -65°C to +135°C
Table II. Electrical performance Characteristics
Test
Symbol
Conditions
-55°C ≤ TC ≤ +125°C
IN = 28VDC ±5%, CL = 0
Unless otherwise specified
Group A
Subgroups
Device
Types
Limits
Units
V
V
Min
Max
Output voltage
VOUT
IOUT = 0
1
2,3
1,2,3
1,2,3
01
4.95
4.90
5.05
5.10
6000
Output current 1
IOUT
VRIP
VIN = 16, 28, and 40 VDC
VIN = 16, 28, and 40 VDC
B.W. = 20Hz to 2 MHz
VIN = 16, 28, and 40 VDC
IOUT = 0, 3000, and 6000mA
01
01
mA
mV p-p
Output ripple voltage 2
60
Line regulation 3
VRLINE
1
01
mV
±20
2,3
1,2,3
±30
±50
Load regulation 3
Input current
VRLOAD
IIN
VIN = 16,28, and 40 VDC
IOUT = 0, 3000, and 6000mA
IOUT = 0, inhibit (pin 2)
Tied to input return (pin 10)
IOUT = 0, inhibit (pin 2) = open
IOUT =6000mA
01
01
mV
mA
1,2,3
1,2,3
18
50
50
Input ripple current2
Efficiency
IRIP
EFF
01
01
01
mA p-p
%
B.W. = 20Hz to 2 MHz
IOUT =6000mA
1
2,3
1
76
72
100
Isolation
ISO
Input to output or any pin
to case (except pin 8) at
500 VDC, TC =+25°C
No effect on dc performance
TC =+25°C
MΩ
Capacitive load 4, 5
µF
CL
PD
4
1
01
01
500
12
Overload, TC = +25°C 6
Power dissipation
load fault
W
Short Circuit
IOUT = 6000mA
IOUT = 6000mA
3000mA to/from 6000mA
500mA to/from 3000mA
3000mA to/from 6000mA
1,2,3
4,5,6
4,5,6
4,5,6
4,5,6
4
5,6
4
5,6
4,5,6
9
Switching frequency
FS
FSYNC
VOTLOAD
01
01
01
500
500
-500
-500
600
700
+500
+500
100
200
100
200
±500
KHz
KHz
mV pk
Sync frequency range
Output response to step
transient load changes 7
Recovery time step
TTLOAD
transient load changes 7, 8
µ
s
01
01
500mA to/from 3000mA
Output response to transient
step line changes 5, 9
VOTLINE
Input step 16V to/from
40VDC, IOUT = 6000mA
mV pk
For Notes to Specifications, refer to page 5
4
www.irf.com
ATR28XXS Series
ATR2805S
Table II. Electrical performance Characteristics - continued
Test
Symbol
Conditions
Group A
Subgroups
Device
Types
Limits
Units
-55°C ≤ TC ≤ +125°C
VIN = 28VDC ±5%, CL = 0
Unless otherwise specified
Min
Max
Recovery time transient step
line changes 5, 8, 9
TTLINE
Input step 16V to/from
40VDC, IOUT = 6000mA
4,5,6
01
10
ms
Turn on overshoot
VTonOS
TonD
TrLF
IOUT =0 and 6000mA
IOUT =0 and 6000mA
4,5,6
4,5,6
4,5,6
01
01
01
500
25
25
mV pk
ms
ms
Turn on delay 10
Load fault recovery 5, 10
Notes to Specifications
1
2
3
4
Parameter guaranteed by line and load regulation tests.
Bandwidth guaranteed by design. Tested for 20 KHz to 2 MHz.
Output voltage measured at load with remote sense leads connected across load.
Capacitive load may be any value from 0 to the maximum limit without compromising dc performance. A capacitive load in excess of
the maximum limit will not disturb loop stability but may interfere with the operation of the load fault detection circuitry, appearing
as a short circuit during turn on.
5
6
Parameter shall be tested as part of design characterization and after design or process changes. Thereafter parameters shall be
guaranteed to the limits specified in table II.
An overload is that condition with a load in excess of the rated load but less than that necessary to trigger the short circuit
protection and is the condition of maximum power dissipation.
7
8
Load step transition time between 2 and 10 microseconds.
Recovery time is measured from the initiation of the transient to where VOUT has returned to within ±1 percent of VOUT at 50 percent
load.
9
Input step transition time between 2 and 10 microseconds.
10 Turn on delay time measurement is for either a step application of power at the input or the removal of a ground signal from the
inhibit pin (pin 2) while power is applied to the input.
www.irf.com
5
ATR28XXS Series
Specifications
ATR2812S
ABSOLUTE MAXIMUM RATINGS
Input Voltage
-0.5V to 50V
Soldering Temperature
Case Temperature
300°C for 10 seconds
Operating -55°C to +125°C
Storage -65°C to +135°C
Table III. Electrical performance Characteristics
Test
Symbol
Conditions
-55°C ≤ TC ≤ +125°C
Group A
Subgroups
Device
Types
Limits
Units
V
IN = 28VDC ±5%, CL = 0
Min
Max
12.12
12.30
2500
60
Unless otherwise specified
Output voltage
VOUT
IOUT = 0
1
2,3
1,2,3
1,2,3
01
11.88
11.70
V
Output current 1
IOUT
VRIP
VIN = 16, 28, and 40 VDC
01
01
mA
mVp-p
Output ripple voltage 2
VIN = 16, 28, and 40 VDC
B.W. = 20Hz to 2 MHz
VIN = 16, 28, and 40 VDC
Line regulation 3
Load regulation 3
Input current
±
VRLINE
VRLOAD
IIN
1
30
I
OUT = 0, 1250, and 2500mA
01
01
01
mV
mV
mA
2,3
1
±60
VIN = 16,28, and 40 VDC
OUT = 0, 1250, and 2500mA
±
60
I
2,3
1,2,3
±120
18
IOUT = 0, inhibit (pin 2)
Tied to input return (pin 10)
IOUT = 0, inhibit (pin 2) = open
1
2,3
1,2,3
50
75
50
Input ripple current 2
Efficiency
IRIP
EFF
ISO
IOUT =2500mA
B.W. = 20Hz to 2 MHz
IOUT=2500mA
01
01
01
mAp-p
%
1
2,3
1
80
75
100
Isolation
Input to output or any pin
To case (except pin 8) at
500 VDC, TC =+25°C
No effect on dc performance
TC =+25°C
MΩ
Capacitive load 4, 5
CL
PD
4
1
01
01
500
12
µF
Overload, TC = +25°C 6
Power dissipation
load fault
W
Short Circuit
IOUT = 2500mA
IOUT = 2500mA
1250mA to/from 2500mA
200mA to/from 1250mA
1250mA to/from 2500mA
1,2,3
4,5,6
4,5,6
4,5,6
4,5,6
4
9
600
700
+800
+1000
100
Switching frequency
FS
FSYNC
VOTLOAD
01
01
01
500
500
-800
-1000
KHz
KHz
mV pk
Sync frequency range
Output response to step
transient load changes 7
Recovery time step
TTLOAD
transient load changes 7, 8
5,6
01
01
200
µs
200mA to/from 1250mA
4
5,6
4,5,6
100
200
±1200
Output response to
transient step line
changes 5, 9
VOTLINE
Input step 16V to/from
40VDC, IOUT = 2500mA
mV pk
For Notes to Specifications, refer to page 7
6
www.irf.com
ATR28XXS Series
ATR2812S
Table III. Electrical performance Characteristics - continued
Test
Symbol
Conditions
-55°C ≤ TC ≤ +125°C
Group A
Subgroups
Device
Types
Limits
Units
V
IN = 28VDC ±5%, CL = 0
Min
Max
10
Unless otherwise specified
Recovery time transient
step line changes 5, 8, 9
Turn on overshoot
TTLINE
Input step 16V to/from
40VDC, IOUT = 2500mA
4,5,6
01
ms
VTonOS
TonD
TrLF
IOUT =0 and 2500mA
IOUT =0 and 2500mA
4,5,6
4,5,6
4,5,6
01
01
01
800
25
25
mV pk
ms
ms
Turn on delay 10
Load fault recovery 5, 10
Notes to Specifications
1
2
3
4
Parameter guaranteed by line and load regulation tests.
Bandwidth guaranteed by design. Tested for 20 KHz to 2 MHz.
Output voltage measured at load with remote sense leads connected across load.
Capacitive load may be any value from 0 to the maximum limit without compromising dc performance. A capacitive load in excess of
the maximum limit will not disturb loop stability but may interfere with the operation of the load fault detection circuitry, appearing
as a short circuit during turn on.
5
6
Parameter shall be tested as part of design characterization and after design or process changes. Thereafter parameters shall be
guaranteed to the limits specified in table III.
An overload is that condition with a load in excess of the rated load but less than that necessary to trigger the short circuit
protection and is the condition of maximum power dissipation.
7
8
Load step transition time between 2 and 10 microseconds.
Recovery time is measured from the initiation of the transient to where VOUT has returned to within ±1 percent of VOUT at 50 percent
load.
9
Input step transition time between 2 and 10 microseconds.
10 Turn on delay time measurement is for either a step application of power at the input or the removal of a ground signal from the
inhibit pin (pin 2) while power is applied to the input.
www.irf.com
7
ATR28XXS Series
Specifications
ATR2815S
ABSOLUTE MAXIMUM RATINGS
Input Voltage
-0.5V to 50V
Soldering Temperature
Case Temperature
300°C for 10 seconds
Operating -55°C to +125°C
Storage -65°C to +135°C
Table IV. Electrical performance Characteristics
Test
Symbol
Conditions
Group A
Subgroups
Device
Types
Limits
Units
-55°C ≤ TC ≤ +125°C
VIN = 28VDC ±5%, CL = 0
Unless otherwise specified
Min
Max
15.15
15.40
2000
Output voltage
VOUT
IOUT
IOUT = 0
1
2,3
1,2,3
01
01
01
14.85
14.60
V
Output current 1
Output ripple voltage 3
Line regulation 3
VIN = 16, 28, and 40 VDC
each output.
VIN = 16, 28, and 40 VDC
B.W. = 20Hz to 2 MHz
VIN = 16, 28, and 40 VDC
mA
VRIP
1,2,3
1
mVp-p
±75
±35
VRLINE
I
OUT = 0, 1250, and 2500mA
01
01
01
mV
mV
mA
2,3
1
±75
±75
Load regulation 3
Input current
VRLOAD
VIN = 16,28, and 40 VDC
OUT = 0, 1250, and 2500mA
I
2,3
1,2,3
±150
IIN
IOUT = 0, inhibit (pin 2)
Tied to input return (pin 10)
IOUT = 0,
Inhibit (pin 2) = open
IOUT = 2500mA
18
1
2,3
1,2,3
75
100
50
Input ripple current 2
Efficiency 4
IRIP
01
01
mAp-p
%
B.W. = 20Hz to 2 MHz
IOUT = 2500mA
EFF
1
79
2,3
1
75
100
Isolation
ISO
CL
Input to output or any pin
to case (except pin 7) at
500 VDC, TC =+25°C
No effect on dc performance,
TC =+25°C. Total for both
outputs
01
01
MΩ
Capacitive load 4,
µ
F
5
4
1
500
12
Overload, TC = +25°C 6
Power dissipation
load fault
PD
01
W
Short Circuit
IOUT = 2500mA
IOUT = 2500mA
1000mA to/from 2000mA
167mA to/from 1000mA
1000mA to/from 2000mA
1,2,3
4,5,6
4,5,6
4,5,6
4,5,6
4
9
600
700
+1000
+1000
100
Switching frequency 4
Sync frequency range
Output response to step
transient load changes 7
Recovery time step
FS
FSYNC
VOTLOAD
01
01
01
500
500
-1000
-1000
KHz
KHz
mVp-k
TTLOAD
transient load changes 7, 8
5,6
01
01
200
µs
167mA to/from 1000mA
4
5,6
4,5,6
100
200
±1500
Output response to
transient step line
changes 5, 9
VOTLINE
Input step 16V to/from
40VDC, IOUT = 2000mA
mVpk
For Notes to Specifications, refer to page 9
8
www.irf.com
ATR28XXS Series
ATR2815S
Table IV. Electrical performance Characteristics - continued
Test
Symbol
Conditions
Group A
Subgroups
Device
Types
Limits
Units
-55°C ≤ TC ≤ +125°C
VIN = 28VDC ±5%, CL = 0
Unless otherwise specified
Min
Max
10
Recovery time transient
step line changes 5, 8, 9
Turn on overshoot
TTLINE
Input step 16V to/from
40VDC, IOUT = 2500mA
IOUT =0 and 2000mA
IOUT =0 and 2000mA
4,5,6
01
ms
VTonOS
TonD
TrLF
4,5,6
4,5,6
4,5,6
01
01
01
1000
25
mVpk
ms
ms
Turn on delay 10
Load fault recovery 5, 10
25
Notes to Specifications
1
2
3
4
Parameter guaranteed by line and load regulation tests.
Bandwidth guaranteed by design. Tested for 20 KHz to 2 MHz.
Output voltage measured at load with remote sense leads connected across load.
Capacitive load may be any value from 0 to the maximum limit without compromising dc performance. A capacitive load in excess of
the maximum limit will not disturb loop stability but may interfere with the operation of the load fault detection circuitry, appearing
as a short circuit during turn on.
5
6
Parameter shall be tested as part of design characterization and after design or process changes. Thereafter parameters shall be
guaranteed to the limits specified in table IV.
An overload is that condition with a load in excess of the rated load but less than that necessary to trigger the short circuit
protection and is condition of maximum power dissipation.
7
8
Load step transition time between 2 and 10 microseconds.
Recovery time is measured from the initiation of the transient to where VOUT has returned to within ±1 percent of VOUT at 50 percent l
load.
9
Input step transition time between 2 and 10 microseconds.
10 Turn on delay time measurement is for either a step application of power at the input or the removal of a ground signal from the
inhibit pin (pin2) while power is applied to the input.
www.irf.com
9
ATR28XXS Series
ATR28XXS Block Diagram
EM I
Filter
1
5
4
+Vout
+Input
Return
Primary
Housekeeping
Supply
2
Enable
8
Case
D rive
6
3
+Sense
-Sense
Pulse W idth
M odulator
Error
Am p &
Ref
9
FB
Sync
C S
Input
Return
10
Application Information
Thermal Management
Inhibit Function
Assuming that there is no forced air flow, the package
temperature rise above ambient (∆T) may be calculated
using the following expression:
Connecting the inhibit input (Pin 2) to input common (Pin 10)
will cause the converter to shut down. It is recommended
that the inhibit pin be driven by an open collector device
capable of sinking at least 400µA of current. The open cir-
cuit voltage of the inhibit input is 11.5 ±1 VDC.
∆T = 80 A –0.7 P 0.85 (°C)
where A = the effective surface area in square inches
(Including heat sink if used),Pd = power dissipation in watts.
EMI Filter
An Optional EMI filter (AFC461)is available that will reduce
the input ripple current to levels below the limits imposed by
MIL-STD-461B CEO3.
The total surface area of the ATR package is 7.34 square
inches. If a worse case full load efficiency of 76% is as-
sumed, then the case temperature rise of an ATR2805S
can be calculated as follows:
Output Voltage Adjustment
The output voltage of the ATR2805S converter can be ad-
justed upward by connecting an appropriate resistor value
between the Positive Output (Pin 5) and the Positive Sense
(Pin 6) as shown in Table 1 below.
1
1
P = P
−1 = 30
−1 = 9.5W
out
Eff
76
∆T = 80 (7.34)-0.7 (9.5)0.85 = 134°C
Output Voltage Increase (V)
Resistance Pin 5 to 6 (Ω)
109
240
400
600
857
1200
0.1
0.2
0.3
0.4
0.5
0.6
Hence, if TAMBIENT = +25°C, the DC/DC converter case
temperature will be approximately 159°C if no heat sink
or air flow is provided.
To calculate the heat sink area required to maintain a
specific case temperature rise, the above equation may
be manipulated as follows:
Table1 Output adjustment resistor values for ATR2805S
Device Synchronization
−1.43
∆T
80P
d
Whenever multiple DC/DC converters are utilized in a single
system, significant low frequency noise may be generated
due to slight difference in the switching frequencies of the
converters. Because of the low frequency nature of this
noise (typically less than 10KHz), it is difficult to filter out
and may interfere with proper operation of sensitive sys-
tems. Advanced Analog permits synchronization of multiple
ATR28XX converters to match switching frequency of the
converter to the frequency of the system clock, thus elimi-
nating this type of noise.
A
=
− A
HEATSINK
PKG
0.85
As an example, if a maximum case temperature rise of
50°C above ambient is required, then the required
effective heat sink area is:
−1.43
50
2
A
=
− 7.34 = 22.9in
HEATSINK
0.85
80
9.5
( )
10
www.irf.com
ATR28XXS Series
ATR28XXS Case Outlines
Non-Flanged
Flanged
Ø
0.162
0.050
0.800
2 Holes
0.040 D
X
0.26 L Pins
2.880
Max
2.110
Max
4 X 0.400
=1.600
2.550
2.110
0.390
Max
0.390
Max
1.110
Part Numbering
Pin Designation
ATR 28 15 S F / CH
Pin No.
Designation
Screening
Model
– , ES, HB, CH
1
2
Positive Input
Enable Input
Return Sense*
Output Return
Positive Output
Positive Sense*
N/C
Input Voltage
Package Style
28 = 28V Nominal
F = Flange
Omit for Non-flange
Outputs
S = Single
D = Dual
T = Triple
Output Voltage
Single - 03R3 = 3.3V, 05 = 5V
12 = 12V, 15 = 15V
Dual - 12 = ±12V, 15 = ±15V
Triple - 12 = 5V,±12V
15 = 5V,±15V
3
4
5
6
7
8
Case Ground
Sync.
9
10
Input Common
* If neither remote sense nor voltage trim is used, connect
Pin 3 to 4 and 5 to 6 or output voltage will increase by 1.2V.
www.irf.com
11
ATR28XXS Series
Available Screening Levels and ProcessVariations for ATR28XXS Series
Requirement
MIL-STD-883
Method
No
Suffix
ES
Suffix
HB
Suffix
CH
Suffix
Temperature
Range
-20 to +85°C
-55°C to +125°C
-55°C to +125°C
-55°C to +125°C
Element
MIL-PRF-38534
Evaluation
Internal Visual
Temperature
Cycle
2017
1010
Yes
Cond B
Yes
Cond C
Yes
Cond C
∗
Constant
2001
500g
Cond A
Cond A
Acceleration
Burn-in
Final Electrical
(Group A)
1015
MIL-PRF-
38534
48hrs @ 85°C
25°C
48hrs @ 125°C
25°C
160hrs @ 125°C
-55, +25, +125°C
160hrs @ 125°C
-55, +25, +125°C
Seal, Fine &
Gross
External
Visual
1014
2009
Cond A, C
Yes
Cond A, C
Yes
Cond A, C
Yes
∗
∗
* Per Commercial Standards
Available Standard Military Drawing (SMD) Cross Reference
Standard
Military drawing
PIN
Vendor
CAGE
Code
Vendor
Similar
PIN
5962-9462401
5962-9462501
5962-9462601
52467
52467
52467
ATR2805S/CH
ATR2812S/CH
ATR2815S/CH
WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, Tel: (310) 252-7105
IR SANTA CLARA: 2270 Martin Av., Santa Clara, California 95050, Tel: (408) 727-0500
Visit us at www.irf.com for sales contact information.
Data and specifications subject to change without notice. 04/2004
12
www.irf.com
相关型号:
5962-9463001HXA
DC-DC Regulated Power Supply Module, 1 Output, 5.4W, Hybrid, HERMETICALLY SEALED, 8 PIN PACKAGE
MSK
©2020 ICPDF网 联系我们和版权申明