IM810B-23-AH-80.0000MHZ [ILSI]
80MHz Nom,;型号: | IM810B-23-AH-80.0000MHZ |
厂家: | ILSI |
描述: | 80MHz Nom, |
文件: | 总8页 (文件大小:516K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MEMS Oscillator, Ultra Performance, LVCMOS/HCMOS Compatible, 1.00 MHz to 80.00 MHz
IM810 Series
Features:
Typical Applications:
MEMS Technology
Fibre Channel
Server and Storage
GPON, EPON
100M / 1G /10G Ethernet
Direct pin to pin drop-in replacement for industry-standard packages
Ultra-low phase jitter: 0.5 pSec (12 kHz to 20 MHz)
LVCMOS/HCMOS Compatible Output
Industry-standard package 2.5 x 2.0, 3.2 x 2.5, and 5.0 x 3.2 mm x mm
Pb-free, RoHS and REACH compliant
Fast delivery times
Electrical Specifications:
Frequency Range
Frequency Stability
First Year Aging
1.000 MHz to 80.000MHz
See Part Number Guide
±1.5 ppm
Inclusive of Initial Tolerance, Operating Temperature Range, Load, and Voltage.
At + 25ºC ±2ºC
At + 25ºC ±2ºC
10 Years Aging
±5.0 ppm
Operating Temperature
See Part Number Guide
Supply Voltage (Vdd) ±10% See Part Number Guide
31 mA typ./ 33 mA max
Current Consumption
No load condition, F = 20 MHz, Vdd = +2.5 V, +2.8 V or +3.3 V
No load condition, f = 20 MHz, Vdd = +1.8V
29 mA typ./ 31mA max
31 mA max
OE Disable Current
Vdd = +2.5 V, +2.8 V or 3.3 V, OE = GND
Vdd = +1.8 V, OE = GND
30 mA max
ꢀꢀꢀ
Standby Current
70 µA max
10 µA max
Vdd = +2.5 V, +2.8 V or 3.3 V, ST = GND
Vdd = +1.8 V, ST = GND
ꢀꢀꢀ
Waveform Output
Symmetry
LVCMOS/HCMOS
45%/55%
50% of waveform
Rise / Fall Time
Logic “1”
1.2 nSec typ./ 2.0 nSec max 15 pF Load, 10% to 90% of Vdd
90% of Vdd min
10% of Vdd max
Logic “0”
ꢀꢀꢀ
Input Voltage High
Input Voltage Low
Input Pull-up Impedance
70% of Vdd min
30% of Vdd max
Pin 1, OE or ST
ꢀꢀꢀ
Pin 1, OE or ST
ꢀꢀꢀ
100 kΩ typ./ 250 kΩ max
2.0 MΩ min
Pin 1, OE logic high or logic low, or ST logic high
Pin 1, ST logic low
ꢀꢀꢀ
Startup Time
7 mSec typ./ 10 mSec max
150 nSec max
Measured from the time Vdd reaches its rated minimum values
F = 80 MHz, For other frequencies, T_oe = 100 nSec = 3 cycles
OE Enable/Disable Time
Resume Time
ꢀꢀꢀ
6 mSec typ./ 10 mSec max
In standby mode, measured from the time ST pin crosses 50% threshold.
RMS Period Time
1.5 pSec typ./ 2.0 pSec max
2.0 pSec typ./ 3.0 pSec max F = 75 MHz, all Vdds
RMS Period Time (random) 0.5 pSec typ./ 1.0 pSec max F = 10 MHz, Integration bandwidth = 12 kHz to 20 MHz
Notes:
All min and max limits are specified over temperature and rated operating voltage with 15pF output unless otherwise stated.
Typical values are at +25ºC and nominal supply voltage.
Absolute Maximum Limits
Storage Temperature
-65ºC to +150ºC
-0.5 VDC to 4.0 VDC
2000 V max
Supply Voltage (Vdd)
Electrostatic Discharge
Solder Temperature (follow standard Pb free soldering guidelines)
Junction Temperature
260ºC max
150ºC max
Rev 01/30/16_A
Page 1 of 8
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice
MEMS Oscillator, Ultra Performance, LVCMOS/HCMOS Compatible, 1.00 MHz to 80.00 MHz
IM810 Series
Ordering Information:
Part Number Guide
Operating
Temperature
Output Drive
Strength
Stability
(ppm)
Packages
Input Voltage
Select Function
Frequency
IM810B – 5.0 x 3.2
IM810C – 3.2 x 2.5
IM810D – 2.5 x 2.0
1 = +1.8 V
6 = +2.5 V
2 = +2.8 V
7 = +3.0 V
3 = +3.3 V
1 = 0ºC to +70ºC
2 = -40ºC to +85ºC
3 = -20ºC to +70ºC
- = Default
(see tables 2
through 4)
E - ±10
F = ±20
A = ±25
B = ±50
H = Tri-state
S = Standby
-
Frequency
Sample Part Number: IM810C-62-FS-10.0000MHz
This 10.0000 MHz oscillator in a 3.2 x 2.5 package with stability ±20 ppm from -40ºC to +85ºC using a supply voltage of +2.5 V. The Output Drive
Strength (Rise and Fall Time) is 2.00 nSec per Table 3 with 30 pF load. With Pin 1 function as Standby
Sample Part Number: IM810B-23FAH-66.0000MHz
This 66.0000 MHz oscillator in a 5.0 x 3.2 package with stability ±20 ppm from -40ºC to +85ºC using a supply voltage of +2.8 V. The Output Drive
Strength (Rise and Fall Time) is 1.29 nSec per Table 1 with 15 pF load. With Pin 1 function as Tri-state
Notes:
Not all options are available at all frequencies and temperatures ranges.
Please consult with sales department for any other parameters or options.
Oscillator specification subject to change without notice.
Phase Noise:
Figure 1: Phase Noise, 10 MHz, +3.0 V LVCMOS Output
Rev 01/30/16_A
Page 2 of 8
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice
MEMS Oscillator, Ultra Performance, LVCMOS/HCMOS Compatible, 1.00 MHz to 80.00 MHz
IM810 Series
Performance Plots:
Figure 2: Idd vs Frequency
Figure 3: RMS Period vs Frequency
Figure 4: Duty Cycle vs Frequency
Figure 5: RMS Phase Jitter vs Frequency
Figure 6: Idd vs Temperature, 10 MHz Output
Firgure 7: Rise Time vs Temperature, 75 MHz Output
Rev 01/30/16_A
Page 3 of 8
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice
MEMS Oscillator, Ultra Performance, LVCMOS/HCMOS Compatible, 1.00 MHz to 80.00 MHz
IM810 Series
Test Circuit
Waveform
Environmental Specifications:
Environmental Compliance
Parameter
Condition/Test Method
Mechanical Shock
MIL-STD-883F, Method 2002
Mechanical Vibration
Temperature Cycle
Solderability
MIL-STD-883F, Method 2007
JESD22, Method A104
MIL-STD-883F, Method 2003
MSL Level 1 at +260ºC
Moisture Sensitivity Level
Pb Free Solder Reflow Profile
Ts max to TL (Ramp-up Rate)
3ºC / second max
Preheat
Temperature min (Ts min)
Temperature typ (Ts typ)
Temperature max (Ts max)
Time (Ts)
150ºC
175ºC
200ºC
60 to180 seconds
Ramp-up Tate (TL to Tp
3ºC / second max
Time Maintained Above
Temperature (TL)
Time (TL)
217ºC
60 to 150 seconds
Peak Temperature (Tp)
260ºC max for seconds
20 to 40 seconds
6ºC / second max
8 minute max
Time within 5ºC to Peak
Temperature (Tp)
Ramp-down Rate
Tune 25ºC to Peak
Temperature
Moisture Sensitivity Level
(MSL)
Level 1
Units are backward compatible with +240ºC reflow processes
Rev 01/30/16_A
Page 4 of 8
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice
MEMS Oscillator, Ultra Performance, LVCMOS/HCMOS Compatible, 1.00 MHz to 80.00 MHz
IM810 Series
Pin Functionally
Pin Description
Pin
1
Symbol
OE
Functionality
Pin Assignments
High or Open = specified frequency output
Low = Output is high impedance, only output is disabled.
Tri-state
Standby
High or Open = specified frequency output.
Low = Output is low. Device goes to sleep mode. Supply current
reduces to standby current.
ꢀꢀꢀ
ST
OE
1
2
4
3
Vdd
ST
2
GND
Out
Power
Output
Power
Electrical ground
Oscillator output
Top View
3
4
Vdd
Power supply voltage
GND
OUT
Notes:
ꢀꢀꢀ
1. In OE or ST mode, a pull-up resistor of 10.0 kΩ or less is recommended if Pin 1 is not externally
driven
2. A capacitor of value 0.1 µF or higher between Pin 4 (Vdd) and Pin 1 (GND) is required.
Timing Diagrams:
ꢀꢀꢀꢀ
Figure 9: Standby Resume Timing (ꢁꢂ Mode Only)
ꢀꢀꢀꢀ
Figure 8: Startup Timing (OE/ꢁꢂ Mode)
Figure 10: OE Enable Timing (OE Mode Only)
Figure 11: OE Disable Timing (OE Mode Only)
Notes:
IM810 supports gated output which is accurate within rated frequency stability from the first cycle
Rev 01/30/16_A
Page 5 of 8
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice
MEMS Oscillator, Ultra Performance, LVCMOS/HCMOS Compatible, 1.00 MHz to 80.00 MHz
IM810 Series
Selectable Drive Strength Options
Rise/Fall Time (20% to 80%) vs CLOAD Tables
Rise/Fall Time Typ (nS)
Rise/Fall Time Typ (nS)
15
Drive Strength
Drive Strength
5 pF
15 pF
30 pF
45 pF
60 pF
5 pF
30 pF
45 pF
60 pF
(CLOAD
)
(CLOAD
)
pF
13.59
7.18
4.78
3.57
2.87
2.33
2.04
1.69
1.48
1.37
1.29
1.20
1.10
0.99
0.83
0.71
0.65
0.62
0.59
0.57
L
12.45
6.50
4.38
3.27
2.62
2.19
1.76
1.59
1.49
1.22
1.07
1.01
0.96
0.92
0.88
0.86
0.82
0.77
0.66
0.51
17.68
10.27
7.05
5.30
4.25
3.52
3.01
2.59
2.28
2.10
1.88
1.64
1.50
1.41
1.34
1.29
1.24
1.20
1.15
1.09
19.48
16.21
11.61
8.89
7.20
6.00
5.14
4.49
3.96
3.57
3.23
2.96
2.74
2.56
2.39
2.24
2.07
1.94
1.84
1.76
46.21
23.92
16.17
12.18
9.81
8.31
7.10
6.25
5.55
5.00
4.50
4.12
3.80
3.52
3.25
3.04
2.89
2.72
2.58
2.45
57.82
30.76
20.83
15.75
12.65
10.59
9.15
7.98
7.15
6.46
5.87
5.40
4.98
4.64
4.32
4.06
3.82
3.61
3.41
3.24
L
A
R
B
S
D
T
8.68
4.42
2.93
2.21
1.67
1.50
1.06
0.98
0.93
0.90
0.87
0.67
0.44
0.38
0.36
0.34
0.33
0.32
0.31
0.30
18.36
11.93
8.15
6.19
4.94
4.11
3.50
3.03
2.69
2.44
2.21
2.00
1.86
1.76
1.66
1.58
1.51
1.44
1.37
1.29
32.70
16.60
11.19
8.55
6.85
5.68
4.84
4.20
3.73
3.34
3.04
2.79
2.56
2.37
2.20
2.07
1.95
1.85
1.77
1.70
42.06
21.38
14.59
11.04
8.80
7.33
6.26
5.51
4.92
4.42
4.02
3.69
3.43
3.18
2.98
2.80
2.65
2.50
2.39
2.28
A
R
B
S
D
T
E
E
U
F
U
F
W
G
X
W
- = Default
X
K
Y
Q
Z
K
Y
Q
- = Default
M
N
P
M
N
P
Table 1: Vdd = +1.8 V Rise/Fall time for Specific CLOAD
Table 2: Vdd = +2.5 V Rise/Fall time for Specific CLOAD
Rise/Fall Time Typ (nS)
Drive Strength
Rise/Fall Time Typ (nS)
Drive Strength
5 pF
15 pF
30 pF
45 pF
60 pF
5 pF
15 pF
30 pF
45 pF
60 pF
(CLOAD
)
(CLOAD
)
L
A
R
B
S
D
T
7.18
3.61
2.31
1.65
1.43
1.01
0.94
0.90
0.86
0.48
0.38
0.36
0.34
0.33
0.32
0.32
0.30
0.30
0.30
0.29
11.59
6.02
3.95
2.92
2.26
1.91
1.51
1.36
1.25
1.15
1.04
0.87
0.70
0.63
0.60
0.58
0.56
0.55
0.54
0.52
17.24
10.19
6.88
5.12
4.09
3.38
2.86
2.50
2.21
1.95
1.77
1.66
1.56
1.48
1.40
1.31
1.22
1.12
1.02
0.95
27.57
13.98
9.42
7.10
5.66
4.69
3.97
3.46
3.03
2.72
2.47
2.23
2.04
1.89
1.79
1.69
1.62
1.54
1.47
1.41
35.57
18.10
12.24
9.17
7.34
6.14
5.25
4.58
4.07
3.65
3.31
3.03
2.80
2.61
2.43
2.28
2.17
2.07
1.97
1.90
L
A
R
B
S
D
T
7.93
4.06
2.68
2.00
1.59
1.19
1.00
0.94
0.90
0.87
0.62
0.41
0.37
0.35
0.33
0.32
0.31
0.30
0.30
0.29
12.69
6.66
4.40
3.25
2.57
2.14
1.79
1.51
1.38
1.29
1.19
1.08
0.96
0.78
0.67
0.63
0.60
0.57
0.56
0.54
17.94
11.04
7.53
5.66
4.54
3.76
3.20
2.78
2.48
2.21
1.99
1.84
1.72
1.63
1.54
1.46
1.39
1.31
1.22
1.13
30.10
15.31
10.29
7.84
6.27
5.21
4.43
3.84
3.40
3.03
2.76
2.52
2.33
2.15
2.00
1.89
1.80
1.72
1.63
1.55
38.89
19.80
13.37
10.11
8.07
6.72
5.77
5.06
4.50
4.05
3.68
3.36
3.15
2.92
2.75
2.57
2.43
2.30
2.22
2.13
E
U
E
U
F
- = Default
W
G
X
W
- = Default
X
K
Y
Q
Z
K
Y
Q
Z
M
N
P
M
N
P
Table 3: Vdd = +2.8 V Rise/Fall time for Specific CLOAD
Table 4: Vdd= +3.0 V Rise/Fall time for Specific CLOAD
Rev 01/30/16_A
Page 6 of 8
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice
MEMS Oscillator, Ultra Performance, LVCMOS/HCMOS Compatible, 1.00 MHz to 80.00 MHz
IM810 Series
Mechanical Details:
Package Dimensions and Suggest Land Pattern
Option D: 2.70 x 2.40 Package (100% compatible with 2.50 x 2.00 )
Suggested Land Pattern
2.70 ±0.05
1.00
1.90
3
4
2.40 ±0.05
Marking
1.10
Bottom View
1.50
0.5
2
1
1.0
1.2
1.6
0.80 max
0.75
1.1
Option C: 3.20 x 2.50 Package
Suggested Land Pattern
3.20 ±0.05
2.1
2.20
3
4
2.50±0.05
Marking
0.90
Bottom View
1.90
0.7
2
1
0.80 max
0.9
1.4
Opton B: 5.00 x 3.20 Package
Suggested Land Pattern
5.00 ±0.05
2.39
2.54
3
4
3.20 ±0.05
Marking
0.80
Bottom View
2
2.20
1
1.1
0.80 max
1.15
1.5
Marking
Package Information
Line 1 = XXXXX (Lot Code)
Dot to denote Pin 1 location
Leadframe: C194
Plating: NiPdAu
Rev 01/30/16_A
Page 7 of 8
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice
MEMS Oscillator, Ultra Performance, LVCMOS/HCMOS Compatible, 1.00 MHz to 80.00 MHz
IM810 Series
Tape and Reel Dimensions
PITCH
REEL DIA
TAPE
WIDTH
Q1 Q2
Q3 Q4
DIRECTION OF FEED
REF: EIA-481-E
Part
Number
Tape
Width
Pin
Orient.
Reel
Dia.
Size
Pitch
Count
180
330
180
180
1000
3000
3000
3000
IM810B
5.0 x 3.2
8.0 ± 0.1
12.3 max
Q1
IM810C
IM810D
3.2 x 2.5
2.5 x 2.0
4.0 ± 0.1
4.0 ± 0.1
8.3 max
8.3 max
Q1
Q1
Notes:
All dimensions are in mm.
Do not scale drawings.
PROPRIETARY AND CONFIDENTIAL
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION, AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY
PURPOSE NOR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM ILSI America.
Rev 01/30/16_A
Page 8 of 8
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice
相关型号:
©2020 ICPDF网 联系我们和版权申明