IM802C-33-ES-137.0000MHZ [ILSI]
LVCMOS Output Clock Oscillator, 137MHz Nom,;
| 型号： | IM802C-33-ES-137.0000MHZ |
| 厂家： | 
ILSI |
| 描述： | LVCMOS Output Clock Oscillator, 137MHz Nom, |
| 文件： | 总9页 (文件大小：773K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MEMS Oscillator, Low Power, LVCMOS, 115.000 MHz to 137.000 MHz
IM802 Series
Features:
Typical Applications:
MEMS Technology
Direct pin to pin drop-in replacement for industry-standard packages
LVCMOS Compatible Output
Industry-standard package 2.0 x 1.6, 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, and 7.0 x 5.0 mm x mm
Six supply voltages options, +1.8 V, +2.5 V, +2.8 V, +3.3 V and +2.25 V to +3.63 V continuous
Pb-free, Halogen-free, Antimony-free
Fibre Channel
Server and Storage
GPON, EPON
100M / 1G /10G Ethernet
RoHS and REACH compliant
Fast delivery times
Electrical Specifications:
Frequency Range
115.000 MHz to 137.000MHz
See Part Number Guide
Inclusive of Initial Tolerance, Operating Temperature Range, Load,
Voltage, and Aging (First year at +25ºC)
Frequency Stability
Operating Temperature
See Part Number Guide
See Part Number Guide
Supply Voltage (Vdd) ±10%
6.2 mA typ./ 7.5 mA max
5.5 mA typ./ 6.4 mA max
4.9 mA typ./ 5.6 mA max
No load condition, F = 125 MHz, Vdd = +2.8V, +3.0V, = +3.3 V
No load condition, F = 125 MHz, Vdd = +2.5 V
No load condition, F = 125 MHz, Vdd = +1.8 V
Current Consumption
OE Disable Current
Standby Current
4.2 mA max
4.0 mA max
Vdd = +2.5 V to +3.3 V, OE = GND, Output in high-Z state
Vdd = +1.8 V, OE = GND, Output in high-Z state
ꢀꢀꢀ
ST = GND, Vdd = +2.8 V to +3.3V
2.6 µA typ./ 4.3 µA max
1.4 µA typ./ 2.5 µA max
0.6 µA typ./1.3 µA max
ꢀꢀꢀ
ST = GND, Vdd = +2.5 V
ꢀꢀꢀ
ST = GND, Vdd = +1.8 V
Waveform Output
LVCMOS / HCMOS
45%/55%
Symmetry (50% of waveform)
All supply voltages
1.0 nSec typ./ 2.0 nSec max
1.3 nSec typ./ 2.5 nSec max
Vdd = +2.5 V, +2.8 V, + 3.0 V or +3.3 V from 20% to 80% of waveform
Vdd = +1.8 V from 20% to 80% of waveform
Rise / Fall Time
Logic “1”
90% of Vdd min
10% of Vdd max
70% of Vdd max
30% of Vdd min
Logic “0”
ꢀꢀꢀ
Input Characteristics
Input High Voltage
Pin 1, OE or ST
ꢀꢀꢀ
Pin 1, OE or ST
ꢀꢀꢀ
50kΩ min / 87kΩ typ. 150kΩ max
2.0MΩ min
Pin 1, OE logic high or logic or ST logic high
Pin 1, ST logic Low
Input Pull-up Impedance
ꢀꢀꢀ
Startup Time
5 mSec max
122 nSec max
5 mSec max
Measured from the time Vdd reaches its rated minimum value
F=137 MHz For other frequencies Toe = 100 nSec + 3 cycles
Enable Disable Time
Resume Time
ꢀꢀꢀ
Measured from the time ST pin crosses 50% threshold
1.9 pSec typ,/ 3.0 pSec max
1.8 pSec typ./ 4.0 pSec max
F= 125 MHz, Vdd = +2.5 V, +2.8 V, + 3.0 V or +3.3 V
F = 125 MHz, Vdd = +1.8 V
RMS Period Jitter
12.0 pSec typ./ 25.0 pSec max
14.0 pSec typ./ 30.0 pSec max
F = 125 MHz, Vdd = +2.5 V, +2.8 V, + 3.0 V or +3.3 V
F = 125 MHz, Vdd = +1.8 V
Peak-to-peak Period Jitter
0.5 pSec typ./ 0.9 pSec max
1.3 pSec typ./ 2.0 pSec max
Integration Bandwidth = 900 kHz to 7.5 MHz
Integration Bandwidth = 12 kHz to 20.0 MHz
RMS Phase Jitter (random)
Notes:
1. All min and max limits are specified over temperature and rated operating voltage with 15pF output unless otherwise stated.
2. Typical values are at +25ºC and nominal supply voltage.
3333
Absolute Maximum Limits
Storage Temperature
Supply Voltage (Vdd)
Electrostatic Discharge
-65ºC to +150ºC
-0.5 VDC to 4.0 VDC
2000 V max
Solder Temperature (follow standard Pb free soldering guidelines)
Junction Temperature
260ºC max
150ºC max
Rev: 08/18/17_B
Page 1 of 9
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice
MEMS Oscillator, Low Power, LVCMOS, 115.000 MHz to 137.000 MHz
IM802 Series
Ordering Information
Part Number Guide
Operating
Output Drive
Strength
Stability
(ppm)
Select
Function
Packages
Input Voltage
1 = +1.8 V
6 = +2.5 V
2 = +2.7 V
7 = +3.0 V
3 = +3.3 V
Frequency
Temperature
IM802A – 7.0 x 5.0
IM802B – 5.0 x 3.2
IM802C – 3.2 x 2.5
IM802D – 2.5 x 2.0
IM802E – 2.0 x 1.6
1 = 0ºC to +70ºC
2 = -40ºC to +85ºC
3 = -20ºC to +70ºC
- = Default
(see tables 2 F = ±20
through 6)
E = ±10
H = Tri-state
S = Standby
O = N/C
A = ±25
B = ±50
- Frequency
8 = +2.25 V to +3.63 V
Sample Part Number: IM802C-62-FS-100.0000MHz
This 100.0000 MHz oscillator in a 3.2 x 2.5 package with stability ±20 ppm from -40ºC to +85ºC using a supply voltage of +2.5 V. The Output Drive Strength
(Rise and Fall Time) is 0.96 nSec per Table 3 with 15 pF load. With Pin 1 function as Standby
Sample Part Number: IM802B-71EAO-133.0000MHz
This 133.0000 MHz oscillator in a 5.0 x 3.2 package with stability ±25 ppm from 0ºC to +70ºC using a supply voltage of +3.0 V. The Output Drive Strength
(Rise and Fall Time) is 1.00 nSec per Table 3 with 15 pF load. With Pin 1 function is not connected
Notes:
Not all options are available at all frequencies and temperatures ranges.
Please consult with sales department for any other parameters or options.
Oscillator specification subject to change without notice.
Test Circuit
Waveform
Rev: 08/18/17_B
Page 2 of 9
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice
MEMS Oscillator, Low Power, LVCMOS, 115.000 MHz to 137.000 MHz
IM802 Series
Performance Plots:
Figure 1: Idd vs Frequency
Figure 2: Frequency vs Temperature, 1.8 V
Figure 3: RMS Period Jitter vs Frequency
Figure 4: Duty Cycle vs Frequency
Figure 5: 20% to 80% Rise Time vs Temperature
Figure 6: 20% to 80% Fall Time vs Temperature
Rev: 08/18/17_B
Page 3 of 9
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice
MEMS Oscillator, Low Power, LVCMOS, 115.000 MHz to 137.000 MHz
IM802 Series
Performance Plots (Cont.)
Figure 7: RMS Integrated Phase Jitter Random
(12 kHz to 20 MHz vs Frequency)
Figure 8: RMS Integrated Phase Jitter Random
(900 kHz to 20 MHz vs Frequency
Notes:
All plots are measured with 15pF load at room temperature unless otherwise stated.
Phase noise plots are measured with Agilent E5052B signal source analyzer integration range is up to 5 MHz for carrier frequencies below 40 MHz
Environmental Specifications:
Environmental Compliance
Parameter
Condition/Test Method
Mechanical Shock
MIL-STD-883F, Method 2002
Mechanical Vibration
Temperature Cycle
Solderability
MIL-STD-883F, Method 2007
JESD22, Method A104
MIL-STD-883F, Method 2003
MSL Level 1 at +260ºC
Moisture Sensitivity Level
Pb Free Solder Reflow Profile
Ts max to TL (Ramp-up Rate)
3ºC / second max
Preheat
Temperature min (Ts min)
Temperature typ (Ts typ)
Temperature max (Ts max)
Time (Ts)
150ºC
175ºC
200ºC
60 to180 seconds
Ramp-up Tate (TL to Tp
3ºC / second max
Time Maintained Above
Temperature (TL)
Time (TL)
217ºC
60 to 150 seconds
Peak Temperature (Tp)
260ºC max for seconds
Time within 5ºC to Peak
Temperature (Tp)
20 to 40 seconds
Ramp-down Rate
6ºC / second max
8 minute max
Level 1
Tune 25ºC to Peak Temperature
Moisture Sensitivity Level (MSL)
Units are backward compatible with +240ºC reflow processes
Rev: 08/18/17_B
Page 4 of 9
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice
MEMS Oscillator, Low Power, LVCMOS, 115.000 MHz to 137.000 MHz
IM802 Series
Pin Functionally
Pin Description
Pin
1
Symbol
OE
Functionality
Pin Assignments
High or Open = specified frequency output
Low = Output is high impedance, only output is disabled.
Tri-state
Standby
High or Open = specified frequency output.
Low = Output is low. Device goes to sleep mode. Supply current
reduces to standby current.
ꢀꢀꢀ
ST
OE
ST
N/C
1
2
4
3
Vdd
Any voltage between 0.0 V to Vdd or Open = specified frequency
No Connect output
Pin 1 has no functiion
N/C
Top View
2
GND
Out
Power
Output
Power
Electrical ground
Oscillator output
GND
OUT
3
4
Vdd
Power supply voltage
Notes:
ꢀꢀꢀ
1. In OE or ST mode, a pull-up resistor of 10.0 kΩ or less is recommended if Pin 1 is not externally
driven. If Pin 1 needs to be left floating, use the NC option.
2. A capacitor of value 0.1 µF or higher between Pin 4 (Vdd) and Pin 1 (GND) is required.
ꢀꢀꢀꢀ
Pin 1 Configuration Options (OE, or ꢁꢂ, or NC)
Pin 1 of the IM802 can be factory-programmed to support three modes: Output Enable (OE), Standby (ST) or No Connect (NC).
ꢀꢀꢀ
Output Enable (OE) Mode
In the OE mode, applying logic Low to the OE pin only disables the output driver and puts it in Hi-Z mode. The core of the device
continues to operate normally. Power consumption is reduced due to the inactivity of the output. When the OE pin is pulled High, the
output is typically enabled in <1µSec.
ꢀꢀꢀꢀ
Standby ꢁꢂꢃMode
In the ST mode, a device enters into the standby mode when Pin 1 pulled Low. All internal circuits of the device are turned off. The
ꢀꢀꢀ
current is reduced to a standby current, typically in the range of a few µA. When ST is pulled High, the device goes through the
“resume” process, which can take up to 5 mSec.
No Connect (NC) Mode
In the NC mode, the device always operates in its normal mode and outputs the specified frequency regardless of the logic level
on Pin 1.
Table1 below summarizes the key relevant parameters in the operation of the device in OE, ST, or NC mode.
Parameters
Active current 125.0 MHz (max +1.80 VDC)
OE
5.6 mA
ST
5.6 mA
NC
5.6 mA
OE disable current (max +1.80 VDC)
Standby current (typical +1.80 VDC)
OE enable time at 125.0 MHz (max)
4.0 mA
N/A
N/A
0.6 µA
N/A
N/A
N/A
N/A
124 nSec
Resume time from standby
(max, all frequency)
N/A
5 mSec
N/A
N/A
Output driver in OE disable/standby mode
High Z
Table 1 OE vs. ST vs. NC
Rev: 08/18/17_B
Page 5 of 9
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice
MEMS Oscillator, Low Power, LVCMOS, 115.000 MHz to 137.000 MHz
IM802 Series
Timing Diagrams:
ꢀꢀꢀꢀ
Figure 10: Standby Resume Timing (ꢄꢅ Mode Only)
ꢀꢀꢀꢀ
Figure 9: Startup Timing (OE/ꢄꢅ Mode)
Figure 12: OE Disable Timing (OE Mode Only)
Figure 11: OE Enable Timing (OE Mode Only)
Rev: 08/18/17_B
Page 6 of 9
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice
MEMS Oscillator, Low Power, LVCMOS, 115.000 MHz to 137.000 MHz
IM802 Series
Selectable Drive Strength Option
Rise/Fall Time (20% to 80%) vs CLOAD Tables
Rise/Fall Time Typ (nSec)
Rise/Fall Time Typ (nSec)
Drive Strength
5 pF
15 pF
30 pF
(CLOAD
)
Drive Strength
5 pF
15 pF
30 pF
(CLOAD
)
R
B
T
1.45
1.09
0.62
0.54
0.43
0.34
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
T
E
U
0.93
0.78
0.70
0.65
n/a
n/a
n/a
n/a
n/a
n/a
1.28
1.00
0.96
0.88
1.48
1.30
E
- = (default)
- = (default)
F
Table 2: Vdd = +1.8 V Rise/Fall time for Specific CLOAD
Table 3: Vdd = +2.5 V Rise/Fall time for Specific CLOAD
Rise/Fall Time Typ (nSec)
Drive Strength
Rise/Fall Time Typ (nSec)
Drive Strength
5 pF
15 pF
30 pF
5 pF
15 pF
30 pF
(CLOAD
)
(CLOAD)
R
B
T
1.29
0.97
0.55
0.44
0.34
0.29
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1.48
R
B
1.22
0.89
0.51
0.38
0.30
0.27
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1.39
1.12
1.00
0.88
0.81
- = (default)
1.00
0.92
0.83
0.76
E
E
U
F
- = (default)
F
Table 4: Vdd = +2.8 V Rise/Fall time for Specific CLOAD
Table 5: Vdd = +3.0 V Rise/Fall time for Specific CLOAD
Rise/Fall Time Typ (nSec)
Drive Strength
5 pF
15 pF
30 pF
(CLOAD
)
R
B
1.16
0.81
0.46
0.33
0.28
0.29
n/a
n/a
n/a
n/a
- = (default)
1.00
0.87
0.79
0.72
n/a
E
U
F
n/a
1.46
1.31
Table 6: Vdd = +3.3 V Rise/Fall time for Specific CLOAD
Note :
“n/a” indicates that the resulting rise/fall time from the respective combination of the drive strength and output does not provide rail-
to rail swing and is not available.
Rev: 08/18/17_B
Page 7 of 9
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice
MEMS Oscillator, Low Power, LVCMOS, 115.000 MHz to 137.000 MHz
IM802 Series
Mechanical Detail
Package Dimensions and Suggested Land Pattern
Option E: 2.00 x 1.60 x 0.80 Package
Suggested Land Pattern
2.00 ±0.05
1.23
1.50
3
4
1.60 ±0.05
Marking
0.93
Bottom View
1.20
0.48
2
1
0.8
1.0
1.2
1.6
2.0
0.80 max
0.68
0.9
Option D: 2.50 x 2.00 x 0.80 Package
Suggested Land Pattern
2.50 ±0.05
1.00
1.90
3
4
2.00 ±0.05
Marking
1.10
Bottom View
1.50
0.5
2
1
0.80 max
0.75
1.1
Option C: 3.20 x 2.50 x 0.80 Package
Suggested Land Pattern
3.20 ±0.05
2.1
2.20
3
4
2.50±0.05
Marking
0.90
Bottom View
1.90
0.7
2
1
0.80 max
0.9
1.4
Option B: 5.00 x 3.20 X 0.80 Package
Suggested Land Pattern
5.00 ±0.05
2.39
2.54
3
4
3.20 ±0.05
Marking
0.80
Bottom View
2
2.20
1
1.1
0.80 max
1.15
1.5
Option A: 7.00 x 5.00 X 1.00 Package
Suggested Land Pattern
7.00 ±0.05
5.08
5.08
3
4
1
Bottom
View
5.00 ±0.05
Marking
2.60
3.81
1.1
2
1.00 max
1.4
2.2
Marking
Package Information
Line 1 = XXXXX (Lot Code)
Dot to denote Pin 1 location
Leadframe: C194
Plating: NiPdAu
Rev: 08/18/17_B
Page 8 of 9
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice
MEMS Oscillator, Low Power, LVCMOS, 115.000 MHz to 137.000 MHz
IM802 Series
Tape and Reel Dimensions
PITCH
REEL DIA
TAPE
WIDTH
Q1 Q2
Q3 Q4
DIRECTION OF FEED
REF: EIA-481-E
Part
Size
Tape
Width
Pin
Orient.
Reel
Dia.
Pitch
Count
Number
180
330
180
330
180
180
180
1000
3000
1000
3000
3000
3000
3000
IM802B
7.0 x 5.0
5.0 x 3.2
8.0 ± 0.1
8.0 ± 0.1
16.3 max
12.3 max
Q1
Q1
IM802B
IM802C
IM802D
IM802E
3.2 x 2.5
2.5 x 2.0
2.0 x 1.6
4.0 ± 0.1
4.0 ± 0.1
4.0 ± 0.1
8.3 max
8.3 max
8.3 max
Q1
Q1
Q1
Notes:
All dimensions are in mm.
Do not scale drawings.
PROPRIETARY AND CONFIDENTIAL
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION, AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY
PURPOSE NOR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM ILSI America.
Rev: 08/18/17_B
Page 9 of 9
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice
相关型号：
©2020 ICPDF网 联系我们和版权申明