XLP735155.520000I [IDT]
OSC XO 155.52MHZ LVPECL SMD;型号: | XLP735155.520000I |
厂家: | INTEGRATED DEVICE TECHNOLOGY |
描述: | OSC XO 155.52MHZ LVPECL SMD 机械 输出元件 石英晶振 振荡器 |
文件: | 总15页 (文件大小:919K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
This part is no longer available from Fox, please contact IDT for this product.
Model: FXO-PC73 SERIES
LVPECL 7 x 5mm 3.3V Oscillator
Freq: 0.75 MHz to 1.35GHz
Rev. 12/12/2007
Features
XTREMELY Low Jitter
Low Cost
XPRESS Delivery
Frequency Resolution to six decimal places
Stabilities to ± 20 PPM
-20 to +70°C or -40 to +85°C operating temperatures
Tri-State Enable / Disable Feature
Industry Standard Package, Footprint & Pin-Out
Fully RoHS compliant
Applications
• ANY application requiring an oscillator
• SONET
Gold over Nickel Termination Finish
Serial ID with Comprehensive Traceability
• Ethernet
• Storage Area Network
• Broadband Access
V
• Microprocessors / DSP / FPGA
• Industrial Controllers
• Test and Measurement Equipment
• Fiber Channel
DD
Enable / Disable
FOX
OUTPUT
XPRESSO
ASICs
GND
For more information -- Click on the drawing
Contents
page
Model Selection & Part Number Guide
Electrical Characteristic
Absolute Maximums
Output Wave Characteristics
Phase Noise
2
3
3
4
5
5
6
6
6
7
8
8
9
Description
The Fox XPRESSO Crystal Oscillator is a
breakthrough in configurable Frequency Control
Solutions. XPRESSO utilizes a family of
proprietary ASICs, designed and developed by
Fox, with a key focus on noise reduction
technologies.
Jitter
Pin Assignment
Recommended Circuit
Reflow
Mechanical Drawing and Pad Layout
Tape and Reel Specification
Label
Traceability – LOT Number & Serial Identification
RoHS Material Declaration
SGS Report
Mechanical Test
Burn-In Test
MTTF / FITS calculations
Other XPRESSO Links
Fox Contact Information
The 3rd order Delta Sigma Modulator reduces
noise to the levels that are comparable to
traditional Bulk Quartz and SAW oscillators.
The ASICs family has ability to select the output
type, input voltages, and temperature
performance features.
10
11 & 12
13
13
14
15
15
With the XPRESS lead-time, low cost, low noise,
wide frequency range, excellent ambient
performance, XpressO is an excellent choice
over the conventional technologies.
Finished XPRESSO parts are 100% final tested.
Page 1 of 15
FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 http://www.foxonline.com
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FXO-PC73 Series
Model Selection Guide & Fox Part Number
STEP #1: Customer selects the Model Description and provides to Fox Customer Service
Model Description
F X O – P C 7 3 6 R – 9 0 6 Frequency (in MHz)
Resolutions to 6 places
past the decimal point
H = HCMOS
L = LVDS
P = LVPECL
C = Ceramic
Q = Quartz
5 = 5 x 3.2mm
7 = 7 x 5mm
3 = 3.3 V
2 = 2.5 V
0 = ± 100 PPM
5 = ± 50 PPM
6 = ± 25 PPM
blank = -20°C to +70°C
R = -40°C to +85°C
M = LVDS (pin 2 E/D)
8 = ± 20 PPM (-20 ~ +70°C)
Q = LVPECL (pin 2 E/D)
X = HCMOS (comp 2nd Output)
STEP #2: The Fox Customer Service team provides a customer specific Part Number
for use on their Bill Of Materials (BOM).
Fox Part Number (The assigned Fox Part Number must be on the BOM – not the above Model Description)
(This will ensure receipt of the proper part)
The 1st Field
7 7 4 – 906 – 2
Product Code #
The 3rd Field
793 = FVXO–HC5
792 = FVXO–HC7
797 = FVXO–LC5
794 = FVXO–LC7
795 = FVXO–PC5
796 = FVXO–PC7
Fox Internally Generated Number
(If any specification changes,
the last digits change)
(The same specs for a different customer
also changes the last digits)
The 2nd Field
The Customer’s Frequency
This example, FXO-PC736R-906 = LVPECL Output, Ceramic, 7 x 5mm Package, 3.3V,
±25 PPM Stability, -40 to +85°C Temperature Range, at 906 MHz
Page 2 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FXO-PC73 Series
Electrical Characteristics
Maximum Value
(unless otherwise noted)
Parameters
Symbol
Condition
Frequency Range
Frequency Stability 1
FO
0.750 MHz to 1.35 GHz
100, 50, 25, & 20 ppm
TO
Standard operating
Optional operating
Storage
-20°C to +70°C
-40°C to +85°C
-55°C to +125°C
Temperature Range
TSTG
VDD
IDD
l
Supply Voltage
Standard
3.3 V ± 5%
120 mA
Input Current (@ Standard Load)
Output Load
Standard Load
Standard 50 Ohms into VDD-2VDC. TYP.
Start-Up Time
TS
10 mS
100 nS
Output Enable / Disable Time
Moisture Sensitivity Level
Termination Finish
MSL
JEDEC J-STD-20
1
Au
Note 1 – Stability is inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, aging, shock and vibration.
Absolute Maximum Ratings (Useful life may be impaired. For user guidelines only, not tested)
Maximum Value
Parameters
Input Voltage
Symbol
VDD
Condition
(unless otherwise noted)
–0.5V to +5.0V
–55°C to +105°C
–55°C to +125°C
150°C
Operating Temperature
Storage Temperature
Junction Temperature
ESD Sensitivity
TAMAX
TSTG
HBM
Human Body Model
1 kV
Page 3 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FXO-PC73 Series
Output Wave Characteristics
Maximum Value
Parameters
Low Output Voltage
Symbol
VOL
Condition
(unless otherwise noted)
0.75 MHz to 1.35 GHz
0.75 MHz to 1.35 GHz
0.75 MHz to 1.35 GHz
@ 50% VP-P Level
1.305V ~ 1.65V
2.055V ~ 2.405V
0.750 VP-P Typ
45% ~ 55%
High Output Voltage
VOH
Typical Complimentary Difference
Output Symmetry (See Drawing Below)
Output Enable Note1 (PIN # 1) Voltage
Output DisableNote1 (PIN # 1) Voltage
Cycle Rise Time (See Drawing Below)
Cycle Fall Time (See Drawing Below)
VP-P
VIH
VIL
TR
TF
> 70% VDD
< 30% VDD
0.75 MHz to 1.35 GHz
0.75 MHz to 1.35 GHz
400 pS
(20%~80%)
400 pS
(80%~20%)
Note1
An optional PIN # 2 as Enable / Disable is available – see Model Selection Guide (page 2)
Rise Time / Fall Time Measurements
TF
TR
2.055V ~ 2.405V
1.305V ~ 1.65V
OUTPUT 2
20% to 80%
OUTPUT 1
Oscillator Symmetry
Ideally, Symmetry should be 50/50 for 1/2 period -- Other expressions are 45/55 or 55/45
OUTPUT 2
2.055V ~ 2.405V
1.305V ~ 1.65V
50% VDD
OUTPUT 1
1/2 Period
Period
Page 4 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FXO-PC73 Series
Phase Noise
0 dBc
Phase Noise Graph
(dBc / Hz) vs. offset frequency
-10dBc
-20dBc
-30dBc
-40dBc
FOUR frequencies matching
the below jitter measurements
-50dBc
212.5 MHz
622.08 MHz
-60dBc
-70dBc
-80dBc
-90dBc
Data Collected using HP 3048A
62.5 MHz
-100dBc
-110dBc
156.25MHz
-120dBc
-130dBc
-140dBc
62.5 MHz
622.08 MHz
156.25MHz
212.5 MHz
-150dBc
-160dBc
10
100
1k
10k
100k
1M
10M
40M
Offset Frequency (10Hz to 40MHz)
Jitter is frequency dependent. Below are typical values at select frequencies.
LVPECL Phase Jitter & Time Interval Error (TIE)
Phase Jitter
T I E
Frequency
62.5 MHz
Units
pS RMS
pS RMS
pS RMS
pS RMS
(12kHz to 20MHz)
(Sigma of Jitter Distribution)
1.01
0.86
1.05
0.94
3.1
3.5
3.6
3.5
156.25 MHz
212.5 MHz
622.08MHz
Phase Jitter is integrated from HP3048 Phase Noise Measurement System; measured directly into 50 ohm input; VDD = 3.3V.
TIE was measured on LeCroy LC684 Digital Storage Scope, directly into 50 ohm input, with Amherst M1 software; VDD = 3.3V.
Per MJSQ spec (Methodologies for Jitter and Signal Quality specifications)
LVPECL Random & Deterministic Jitter Composition
Total Jitter (Tj)
Random (Rj) Deterministic (Dj)
Frequency
62.5 MHz
(14 x Rj) + Dj
(pS RMS)
1.27
(pS P-P)
8.1
26.2 pS
27.7 pS
26.1 pS
26.8 pS
156.25 MHz
212.5 MHz
622.08 MHz
1.29
9.3
1.22
8.6
1.21
9.6
Rj and Dj, measured on LeCroy LC684 Digital Storage Scope, directly into 50 ohm input, with Amherst M1 software.
Per MJSQ spec (Methodologies for Jitter and Signal Quality specifications)
Page 5 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FXO-PC73 Series
Pin Description and Recommended Circuit
Pin #
Name
Type
Logic
Function
Enable / Disable Control of Output (0 = Disabled)
No Connection – Leave OPEN
E / D 1
1
2
2
NC
3
GND
Output
Output 2
Ground
Output
Output
Power
Electrical Ground for VDD
4
LVPECL Oscillator Output
5
Complementary LVPECL Output
Power Supply Source Voltage
3
6
VDD
NOTES:
1
2
3
Includes pull-up resistor to VDD to provide output when the pin (1) is No Connect. (Also see note 2)
An optional pin # 2 Enable / Disable is available.
Installation should include a 0.01µF bypass capacitor placed between VDD
(Pin 6) and GND (Pin 3) to minimize power supply line noise.
0.01 F
E / D
VDD
6
5
4
1
VDD +3.3V
LVPECL OUT#2
LVPECL OUT
E/D
N C
# 1
# 2
# 3
# 6
# 5
# 4
NC
Output 2
Output
2
3
GND
GND
50
50
VDD -2V = +1.3V
Terminations as viewed from the Top
NOTE: XPRESSO LVPECL XOs are designed to
0.01 F
fit on Industry Standard, 6 pad layouts
Enable / Disable Control
Pin # 1 (state)
OPEN (No Connection)
Output (Pin # 4, Pin # 5)
ACTIVE Output
“1” Level VIH > 70% VDD
“0” Level VIL < 30% VDD
ACTIVE Output
High Impedance
Soldering Reflow Profile (2 times Maximum at 260°C for 10 seconds MAX)
10 Seconds Max
within 5°C of 260°C peak
t
p
260°C
Ramp-Up
3°C/s Max
Ramp Down
Not to exceed 6°C/s
225°C
180°C
50±10 Seconds
Above 225°C Reflow Area
120 ± 20 Seconds
In Pre-heating Area
160°C
25°C
400 Seconds MAX from +25°C to 260°C peak
Page 6 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FXO-PC73 Series
Mechanical Dimensional Drawing & Pad Layout
7.5 Max
#6
#5
#4
Actual part marking
is depicted.
TOP
VIEW
X PRESS
O
5.2 Max
1.4 Max
See Traceability (pg. 9)
for more information
#1
#2
#3
0.5
2.54
1.4
#1
#6
#2
#5
#3
#4
2.6
5.08
Recommended
Solder Pad Layout
5.08
2.54
4.2
2
1.8
Note: XPRESSO LVPECL XOs are designed to fit on
Industry standard, 6 pad, layouts.
Pin Connections
#1) E/D
#2) NC
#3) GND
#4) Output
#5) Output 2
#6) VDD
Drawing is for reference to critical specifications defined by size measurements.
Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary
Page 7 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FXO-PC73 Series
Tape and Reel Dimensions
4.0mm
Ø1.5mm
7.5mm
16mm
2.15mm
8.0mm
2k Reel Dimensions
in mm
1k Reel Dimensions
in mm
2.0
2.0
120°
Ø21.0
Ø13.0
Ø21.0
255.0
Ø13.0
2.0
80.0
178.0
62.0
2.0
2.0
17.5
17.5
Labeling (Reels and smaller packaging are labeled with the below)
•
•
Fox Part Number: 774-906-2
Quantity: 2000 pieces
Description: FXO-PC736R-906
774-906-2
•
FXO-PC736R-906
•
Date Code
0745
(YYWW 2007 45th wk)
•
LOT #
24435
If traceability should become necessary
An additional identification code is contained internally if tracking should ever be necessary
Page 8 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FXO-PC73 Series
Traceability – LOT Number & Serial Identification
LOT Number
The LOT Number has direct ties to the customer purchase order. The LOT Number is marked on the
“Reel” label, and also stored internally on non-volatile memory inside the XPRESSO part. XPRESSO parts
that are shipped Tape and Reel, are also placed in an Electro Static Discharge (ESD) bag and will have the
LOT Number labeled on the exterior of the ESD bag.
It is recommended that the XPRESSO parts remain in this ESD bag during storage for protection and
identification.
If the parts become separated from the label showing the LOT Number, it can be retrieved from inside one
of the parts, and the information that can be obtained is listed below:
•
•
•
•
•
Customer Purchase Order Number
Internal Fox Sales Order Number
Dates that the XPRESSO part was shipped from the factory
The assigned customer part number
The specification that the part was designed for
Serial Identification
The Serial ID is the individualized information about the configuration of that particular XPRESSO part. The
Serial ID is unique for each and every XPRESSO part, and can be read by special Fox equipment.
With the Serial ID, the below information can be obtained about that individual, XPRESSO part:
•
•
•
•
•
•
•
Equipment that the XPRESSO part was configured on
Raw material used to configure the XPRESSO part
Traceability of the raw material back to the foundries manufacturing lot
Date and Time that the part was configured
Any optimized electrical parameters based on customer specifications
Electrical testing of the actual completed part
Human resource that was monitoring the configuration of the part
Fox has equipment placed at key Fox locations World Wide to read the Lot Identification and Serial
Number of any XPRESSO part produced and can then obtain the information from above within 24 hours
Page 9 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FXO-PC73 Series
RoHS Material Declaration
Material Name
Kovar
Component
Nickel (Ni)
Content
(mg)
Content
(wt%)
(CAS Number)
7440-02-0
7440-48-4
7439-89-6
1344-28-1
14808-60-7
1308-38-9
13463-67-7
1309-48-4
1305-78-8
7440-33-7
7439-98-7
7440-02-0
7440-48-4
7440-57-5
7439-89-6
7440-02-0
7440-48-4
7440-22-4
7440-50-8
7429-90-5
7440-21-3
7440-57-5
7440-22-4
Cover
Base
5.09
3.63%
2.24%
Cobalt (Co)
3.15
Iron (Fe)
9.47
6.75%
Ceramic
Alumina (Al2O3)
79.178
3.143
56.4%
Silicon Oxide (SiO2)
Chromium Oxide (Cr2O3)
Titanium Oxide (TiO2)
Magnesium Oxide (MgO)
Calcium Oxide (CaO)
Tungsten (W)
2.24%
3.379
2.41%
0.873
0.622%
0.311%
0.212%
8.74%
0.437
0.297
+ Metallization
12.272
0.380
Molybdenum (Mo)
0.27%
+ Nickel Plating Nickel (Ni)
Cobalt (Co)
4.740
3.38%
0.395
0.28%
+ Gold Plating
+Seal ring
Gold (Au)
0.624
0.445%
4.14%
Iron (Fe)
5.809
Nickel (Ni)
Cobalt (Co)
Silver (Ag)
Copper (Cu)
Aluminum (Al)
Silicon (Si)
Gold (Au)
3.119
2.22%
1.829
1.30%
+silver solder
2.269
1.62%
0.400
0.285%
0.00150%
0.68%
IC
IC
0.0021
0.950
Gold
0.480
0.342%
0.000150%
0.0000499%
1.45%
Adhesive
Silver (Ag)
Epoxy
0.000210
0.0000700
2.04
Crystal Crystal
Electrode
Silicon Dioxide (SiO2)
Silver (Ag)
Nickel (Ni)
Silver (Ag)
Silicon (Si)
14808-60-7
7440-22-4
7440-02-0
7440-22-4
7440-21-3
0.019
0.0135%
0.000113%
0.000264%
0.000089%
100.00%
0.000159
0.00037
0.000125
140.3
Adhesive
TOTAL
Page 10 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FXO-PC73 Series
3rd Party (SGS) Material Report
Page 11 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FXO-PC73 Series
3rd Party (SGS) Material Report (continued)
Page 12 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FXO-PC73 Series
Mechanical Testing
Parameter
Test Method
Mechanical Shock
Drop from 75cm to hardwood surface – 3 times
10~55Hz, 1.5mm amplitude, 1 Minute Sweep
2 Hours each in 3 Directions (X, Y, Z)
Mechanical Vibration
High Temperature Burn-in
Hermetic Seal
Under Power @ 125°C for 2000 Hours (results below)
He pressure: 4 ±1 kgf / cm2 2 Hour soak
2,000 Hour Burn-In
Burn-In Testing – under power 2000 Hours, 125°C
XpressOLVPECL Burn-In
Freq = 10MHz; VDD= 3.3V; Ta = 125C; N= 120
15
10
5
0
-5
-10
-15
-20
Initial 250 hours 500 hours 1000
hours
2000
hours
Page 13 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FXO-PC73 Series
MTTF / FITS Calculations
Products are grouped together by process for MTTF calculations.
(All XpressO output and package types are manufactured with the same process)
Number of Parts Tested:
Number of Failures: 0
360 (120 of each output type: HCMOS, LVDS, LVPECL)
Test Temperature: 125°C
Number of Hours:
2000
MTTF was calculated using the following formulas:
[1.] Device Hours (devhrs) = (number of devices) x (hours at elevated temperature in °K)
devhrs× af × 2
[2.] MTTF =
χ2
1
[3.] FITS =
* 109
MTTF
Where:
Label
Name
Formula/Value
eV
k
1 1
)×( −
t1 t2
)
e(
af
Acceleration Factor
eV
k
Activation Energy
0.40 V
8.62 X 10-5 eV/°K
Bolzman’s Constant
t1
t2
Θ
r
Operating Temperature (°K)
Accelerated Temperature (°K)
Confidence Level (60% industry standard)
Number of failed devices
Theta
Failures
DEVICE-HOURS = 360 x 2000 HOURS = 720,000
0.40
1
1
(
)×(
−
)
8.625
298 398
ACCELERATION FACTOR =
= 49.91009
e
720,000× 49.91009× 2
MTTF =
= 15,607,065 Hours
1.833
1.833
Failure Rate =
= 6.41E-8
720,000× 49.91009× 2
FITS = Failure Rate *1E9 = 64
Page 14 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FXO-PC73 Series
Notes :
Other XPRESSO Links
XPRESSO Brochure
Crystal Oscillators
HCMOS 5 x 3.2mm 3.3V XO 0.75 to 250MHz
HCMOS 7 x 5mm 3.3V XO 0.75 to 250MHz
LVPECL 5 x 3.2mm 3.3V XO 0.75 to 1.35GHz
LVPECL 7 x 5mm 3.3V XO 0.75 to 1.35GHz
LVDS 5 x 3.2mm 3.3V XO 0.75 to 1.35GHz
LVDS 7 x 5mm 3.3V XO 0.75 to 1.35GHz
Voltage Controlled Crystal Oscillators
HCMOS 5 x 3.2mm 3.3V VCXO 0.75 to 250MHz
HCMOS 7 x 5mm 3.3V VCXO 0.75 to 250MHz
LVPECL 5 x 3.2mm 3.3V VCXO 0.75 to 1.35GHz
LVPECL 7 x 5mm 3.3V VCXO 0.75 to 1.35GHz
LVDS 5 x 3.2mm 3.3V VCXO 0.75 to 1.35GHz
LVDS 7 x 5mm 3.3V VCXO 0.75 to 1.35GHz
Main Website www.foxonline.com
Patent Numbers:
US 6,664,860, US 5,960,403, US 5,952,890; US 5,960,405; US 6,188,290;
Foreign Patents: R.S.A. 98/0866, R.O.C. 120851; Singapore 67081, 67082; EP 0958652
China ZL 98802217.6, Malaysia MY-118540-A, Philippines 1-1998-000245, Hong Kong #HK1026079, Mexico #232179
US and Foreign Patents Pending
XpressO™ Fox Electronics
Contact Information
Fox Japan
Tel:+81.3.3374.2079,
Fax: +81.3.3377.5221
Email: www.foxonline.com/email.htm
(USA)-Worldwide Headquarters
Tel: 888-GET-2-FOX
Outside US: +1.239.693.0099,
Fax:+1.239.693.1554
Fox EMEA
Email: www.foxonline.com/email.htm
Tel/Fax: +44 1283 568153
Email: www.foxonline.com/email.htm
The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication; however, no
responsibility is assumed by Fox Electronics for inaccuracies.
Page 15 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
相关型号:
©2020 ICPDF网 联系我们和版权申明