XLP536C00.000000I [IDT]

LVPECL Output Clock Oscillator, 1200MHz Nom;
XLP536C00.000000I
型号: XLP536C00.000000I
厂家: INTEGRATED DEVICE TECHNOLOGY    INTEGRATED DEVICE TECHNOLOGY
描述:

LVPECL Output Clock Oscillator, 1200MHz Nom

机械 输出元件 振荡器
文件: 总27页 (文件大小:612K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
XL Family of Low Phase Noise  
Quartz-based PLL Oscillators  
XL  
Datasheet  
Description  
Features  
Output types: LVDS, LVPECL, LVCMOS  
The IDT XL devices (XO and VCXO options) are ultra-precision  
crystal oscillators with 750 to 890fs typical phase jitter over 12kHz  
to 20MHz bandwidth. Available in a wide frequency range from  
0.750MHz to 1350MHz, the XL series crystal oscillators utilize a  
family of proprietary ASICs, with a key focus on noise reduction  
technologies.  
Phase jitter (12kHz to 20MHz): 750fs to 890fs typical  
Supply voltage: 2.5V or 3.3V  
Package options:  
3.2 × 2.5 × 1.0 mm (not available for VCXO)  
5.0 × 3.2 × 1.2 mm  
7.0 × 5.0 × 1.3 mm  
The 3rd order Delta Sigma Modulator reduces noise to the levels  
that are comparable to traditional Bulk Quartz and SAW  
oscillators. With short lead-time, low cost, low noise, wide  
frequency range, excellent ambient performance, the XL devices  
are an excellent choice over the conventional technologies. The  
XL (XO option) devices have stabilities as tight as ±20ppm and  
the XL (VCXO option) devices have ±50ppm APR. Either option  
provides extremely quick delivery for both standard and custom  
frequencies.  
Operating temperature: -20°C to +70°C  
Frequency stability options: ±20, ±25, ±50, or ±100 ppm  
(XO only)  
±50ppm APR (VCXO only)  
Operating temperature: -40°C to +85°C  
Frequency stability options: ±25, ±50, or ±100 ppm  
(XO only)  
±50ppm APR (VCXO only)  
Operating temperature: -40°C to +105°C (XO only)  
Frequency stability options: ±50 or ±100 ppm  
kV of 85ppm/volt typical from 0.5VDC to VDD (VCXO only)  
Better than ±10% linearity for Vc range  
Pin Assignments (XO option)  
NOTE: To minimize power supply line noise, a 0.01μF bypass capacitor should be placed between VDD (Pin 6) and GND (Pin 3) on 6-pin  
devices, or VDD (Pin 4) and GND (Pin 2) on 4-pin devices.  
4
1
3
6
1
5
4
2
2
3
Table 1. XO 6-pin Package  
Table 2. XO 4-pin Package  
Number  
Name  
Description  
Number  
Name  
Description  
[a][b]  
[a][b]  
1
E/D  
NC  
Enable/Disable  
No connect  
1
2
3
4
E/D  
GND  
OUT  
Enable/Disable  
Connect to ground  
Output  
2
NC  
E/D  
No connect  
[a][b]  
Enable/Disable  
V
Supply voltage  
DD  
3
4
5
6
GND  
OUT  
Connect to ground  
Output  
[a] Pulled high internally.  
[b] Low = output disabled.  
OUT2  
Complementary output  
Supply voltage  
See Ordering Information (XO) for more details.  
V
DD  
©2018 Integrated Device Technology, Inc.  
1 September 7, 2018  
XL Datasheet  
Pin Assignments (VCXO option)  
NOTE: To minimize power supply line noise, a 0.01μF bypass capacitor should be placed between VDD (Pin 6) and GND (Pin 3).  
6
5
4
1
2
3
Table 3. VCXO 6-pin Package  
Number  
Name  
Description  
1
2
3
4
5
6
Vc  
Voltage control  
[a][b]  
E/D  
Enable/Disable  
Connect to ground  
GND  
OUT  
OUT2  
Output  
Complementary output (NC LVCMOS)  
Supply voltage  
V
DD  
[a] Pulled high internally.  
[b] Low = output disabled.  
See Ordering Information (VCXO) for more details.  
©2018 Integrated Device Technology, Inc.  
2
September 7, 2018  
XL Datasheet  
Contents  
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Pin Assignments (XO option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Pin Assignments (VCXO option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
ESD Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Mechanical Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Solder Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
DC Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
AC Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Output Waveforms – LVDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Output Waveforms – LVPECL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Output Waveforms – LVCMOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Package Outline Drawings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Ordering Information (XO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Ordering Information (VCXO). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
©2018 Integrated Device Technology, Inc.  
3
September 7, 2018  
XL Datasheet  
Absolute Maximum Ratings  
Stresses above the ratings listed below can cause permanent damage to the device. These ratings, which are standard values for IDT  
commercially rated parts, are stress ratings only. Functional operation of the device at these or any other conditions above those  
indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended  
periods can affect product reliability. Electrical parameters are guaranteed only over the recommended operating temperature range.  
Table 4. Absolute Maximum Ratings  
Item  
Rating  
V
-0.5 to +5.0V  
-0.5V to V + 0.5V  
DD  
E/D  
DD  
OUT  
-0.5V to V + 0.5V  
DD  
Storage Temperature  
-55°C to 125°C  
Maximum Junction Temperature 125°C  
Core Current  
65mA maximum  
Theta J  
75.9 °C/W  
48.6°C/W  
89.6 °C/W  
54.3 °C/W  
94.7 °C/W  
66.8 °C/W  
JU6  
JS6  
5.0 × 3.2 × 1.2 mm  
JX6  
A
7.0 × 5.0 × 1.3 mm  
3.2 × 2.5 × 1.0 mm  
Theta J  
B
ESD Compliance  
Table 5. ESD Compliance  
Human Body Model (HBM  
Machine Model (MM)  
1000V  
150V  
Mechanical Testing  
Table 6. Mechanical Testing  
Parameter  
Test Method  
Drop from 75cm to hardwood surface–3 times.  
Mechanical Shock  
Mechanical Vibration  
High Temperature Burn-in  
Hermetic Seal  
10–55Hz, 1.5mm amplitude, 1 minute sweep; 2 hours each in 3 directions (X, Y, Z).  
Under power at 125°C for 2000 hours.  
2
He pressure: 4 ±1kgf/cm 2 hour soak.  
Solder Reflow Profile  
tP  
10 seconds Max within  
5°C of 260°C peak  
260°C  
Ramp up 3°C/s Max  
Ramp down not  
to exceed 6°C/s  
225°C  
180°C  
50 ±10  
seconds  
above 225°C  
reflow area  
120 ±20 seconds  
in pre-heating  
area  
160°C  
25°C  
400 seconds MAX from +25°C to 260°C peak  
©2018 Integrated Device Technology, Inc.  
4
September 7, 2018  
XL Datasheet  
DC Electrical Characteristics  
Table 7. 3.3V IDD DC Electrical Characteristics  
VDD = 3.3V ±5%, TA = -20°C to +70°C; -40°C to +85°C, -40°C to +105°C.  
Symbol  
Parameter  
Output Type  
Conditions  
Minimum  
Typical  
Maximum  
Units  
LVDS  
100  
120  
32  
LVPECL  
0.75MHz to 20MHz.  
20+MHz to 50MHz.  
50+MHz to 130MHz.  
130+MHz to 200MHz.  
200+MHz to 250MHz.  
I
Power Supply Current  
35  
mA  
DD  
LVCMOS  
47  
55  
60  
Table 8. 2.5V IDD DC Electrical Characteristics  
VDD = 2.5V ±5%, TA = -20°C to +70°C; -40°C to +85°C, -40°C to +105°C.  
Symbol  
Parameter  
Output Type  
Conditions  
Minimum  
Typical  
Maximum  
Units  
0.75MHz to 20MHz.  
20+MHz to 220MHz.  
220+MHz to 630MHz.  
630+MHz to 1000MHz.  
0.75MHz to 20MHz.  
20+MHz to 220MHz.  
220+MHz to 630MHz.  
630+MHz to 1000MHz.  
0.75MHz to 20MHz.  
20+MHz to 50MHz.  
50+MHz to 100MHz.  
100+MHz to 130MHz.  
130+MHz to 160MHz.  
160+MHz to 180MHz.  
26  
34  
44  
65  
33  
41  
63  
72  
22  
25  
29  
32  
35  
37  
LVDS  
LVPECL  
LVCMOS  
I
Power Supply Current  
mA  
DD  
©2018 Integrated Device Technology, Inc.  
5
September 7, 2018  
XL Datasheet  
Table 9. LVDS DC Electrical Characteristics  
VDD = 3.3V, 2.5V ±5%, TA = -20°C to +70°C; -40°C to +85°C, -40°C to +105°C. Below are guaranteed for listed standard frequencies.  
Symbol  
Parameter  
Conditions  
Minimum  
Typical  
Maximum  
Units  
V
V
V
V
= 3.3V ±5%.  
= 2.5V ±5%.  
= 3.3V ±5%.  
= 2.5V ±5%.  
0.6  
0.4  
DD  
DD  
DD  
DD  
V
Differential Output Voltage  
OD  
1.3  
V
Output Offset Voltage  
OS  
IH  
1.25  
V
Enable/Disable Input High Voltage  
(Output enabled)  
V
70% V  
DD  
Enable/Disable Input Low Voltage  
(Output disabled)  
V
30% V  
DD  
IL  
Table 10. LVPECL DC Electrical Characteristics  
VDD = 3.3V, 2.5V ±5%, TA = -20°C to +70°C; -40°C to +85°C, -40°C to +105°C. Below are guaranteed for listed standard frequencies.  
Symbol  
Parameter  
Conditions  
Minimum  
Typical  
Maximum  
Units  
V
V
V
V
= 3.3V ±5%.  
= 2.5V ±5%.  
= 3.3V ±5%.  
= 2.5V ±5%.  
2.055  
2.405  
DD  
DD  
DD  
DD  
V
Differential Output Voltage  
OD  
1.4  
1.305  
1.65  
V
Output Offset Voltage  
OS  
IH  
0.68  
V
Enable/Disable Input High Voltage  
(Output enabled)  
V
70% V  
DD  
Enable/Disable Input Low Voltage  
(Output disabled)  
V
30% V  
DD  
IL  
©2018 Integrated Device Technology, Inc.  
6
September 7, 2018  
XL Datasheet  
Table 11. LVCMOS DC Electrical Characteristics  
VDD = 3.3V, 2.5V ±5%, TA = -20°C to +70°C; -40°C to +85°C, -40°C to +105°C. Below are guaranteed for listed standard frequencies.  
Symbol  
Parameter  
Conditions  
0.75MHz to 150MHz.  
Minimum  
Typical  
Maximum Units  
90% V  
80% V  
90% V  
80% V  
DD  
DD  
DD  
DD  
V
V
V
V
= 3.3V ±5%.  
= 2.5V ±5%.  
= 3.3V ±5%.  
= 2.5V ±5%.  
DD  
DD  
DD  
DD  
150+MHz to 250MHz.  
0.75MHz to 160MHz.  
160+MHz to 180MHz.  
0.75MHz to 150MHz.  
150+MHz to 250MHz.  
0.75MHz to 160MHz.  
160+MHz to 180MHz.  
V
Output High Voltage  
OH  
10% V  
20% V  
10% V  
20% V  
DD  
DD  
DD  
DD  
V
V
Output Low Voltage  
OL  
Enable/Disable Input High Voltage  
(Output enabled)  
V
70% V  
IH  
DD  
Enable/Disable Input Low Voltage  
(Output disabled)  
V
30% V  
IL  
DD  
©2018 Integrated Device Technology, Inc.  
7
September 7, 2018  
XL Datasheet  
AC Electrical Characteristics  
Table 12. 3.3V AC Electrical Characteristics  
VDD = 3.3V ±5%, TA = -20°C to +70°C; -40°C to +85°C, -40°C to +105°C.  
Symbol  
Parameter  
Test Condition  
Minimum  
Typical  
Maximum Units  
LVDS.  
0.75  
0.75  
0.75  
±20  
±25  
±50  
1350  
F
Output Frequency Range  
LVPECL.  
LVCMOS.  
1350  
250  
±100  
±100  
±100  
±3  
MHz  
Temperature = -20°C to +70°C.  
Temperature = -40°C to +85°C.  
Temperature = -40°C to +105°C.  
ppm  
ppm  
ppm  
ppm  
ppm  
Frequency Stability  
Aging (1st year)  
Aging (10 years)  
T = 25°C.  
A
T = 25°C.  
±10  
A
LVDS.  
Differential.  
- 2.0V.  
100  
50  
15  
Output Load  
LVPECL.  
LVCMOS.  
V
DD  
To GND.  
pF  
Output valid time after V meets minimum  
specified level.  
DD  
T
Start-up Time  
Output Rise Time  
10  
ms  
ST  
LVDS.  
45  
45  
45  
40  
400  
400  
3
20% to 80% Vpp.  
LVPECL.  
ps  
ns  
ps  
ns  
t
R
LVCMOS.  
LVDS.  
10% to 90% V  
DD.  
400  
400  
3
80% to 20% Vpp.  
90% to 10% V  
t
Output Fall Time  
LVPECL.  
LVCMOS.  
LVDS.  
F
DD.  
55  
55  
55  
60  
100  
LVPECL.  
O
Output Clock Duty Cycle  
%
DC  
F
F
< 62.5MHz.  
< 62.5MHz.  
OUT  
OUT  
LVCMOS.  
T
Output Enable/ Disable Time  
Period Jitter, RMS  
ns  
ps  
OE  
LVDS.  
3
J
LVPECL.  
LVCMOS.  
LVDS.  
5.8  
5
PER  
F
F
F
= 125MHz.  
= 125MHz.  
= 125MHz.  
OUT  
OUT  
OUT  
1.3  
1.29  
0.6  
5.8  
9.3  
10  
R
D
Random Jitter  
LVPECL.  
LVCMOS.  
LVDS.  
ps  
ps  
J
J
Deterministic Jitter  
LVPECL.  
LVCMOS.  
©2018 Integrated Device Technology, Inc.  
8
September 7, 2018  
XL Datasheet  
Table 12. 3.3V AC Electrical Characteristics (Cont.)  
VDD = 3.3V ±5%, TA = -20°C to +70°C; -40°C to +85°C, -40°C to +105°C.  
Symbol  
Parameter  
Test Condition  
Minimum  
Typical  
Maximum Units  
LVDS.  
23.6  
27.7  
19  
T
Total Jitter  
LVPECL.  
LVCMOS.  
LVDS.  
ps  
fs  
J
F
F
= 125MHz.  
= 125MHz.  
OUT  
OUT  
890  
860  
750  
f
Phase Jitter (12kHz–20MHz)  
LVPECL.  
LVCMOS.  
JITTER  
Table 13. 2.5V AC Electrical Characteristics  
VDD = 2.5V ±5%, TA = -20°C to +70°C; -40°C to +85°C, -40°C to +105°C.  
Symbol  
Parameter  
Test Condition  
Minimum  
Typical  
Maximum Units  
LVDS.  
0.75  
0.75  
0.75  
±20  
±25  
±50  
1000  
F
Output Frequency Range  
LVPECL.  
LVCMOS.  
1000  
180  
±100  
±100  
±100  
±3  
MHz  
Temperature = -20°C to +70°C.  
Temperature = -40°C to +85°C.  
Temperature = -40°C to +105°C.  
ppm  
ppm  
ppm  
ppm  
ppm  
Frequency Stability  
Aging (1st year)  
Aging (10 years)  
T = 25°C.  
A
T = 25°C.  
±10  
A
LVDS.  
Differential.  
- 2.0V.  
100  
50  
15  
Output Load  
LVPECL.  
LVCMOS.  
V
DD  
To GND.  
pF  
Output valid time after V meets minimum  
specified level.  
DD  
T
Start-up Time  
Output Rise Time  
10  
ms  
ST  
LVDS.  
45  
45  
45  
400  
400  
3.5  
400  
400  
3
20% to 80% Vpp.  
LVPECL.  
ps  
ns  
ps  
ns  
t
R
LVCMOS.  
LVDS.  
10% to 90% V  
DD.  
80% to 20% Vpp.  
90% to 10% V  
t
Output Fall Time  
LVPECL.  
LVCMOS.  
LVDS.  
F
DD.  
55  
O
Output Clock Duty Cycle  
LVPECL.  
LVCMOS.  
55  
%
DC  
55  
T
Output Enable/ Disable Time  
100  
ns  
OE  
©2018 Integrated Device Technology, Inc.  
9
September 7, 2018  
XL Datasheet  
Table 13. 2.5V AC Electrical Characteristics (Cont.)  
VDD = 2.5V ±5%, TA = -20°C to +70°C; -40°C to +85°C, -40°C to +105°C.  
Symbol  
Parameter  
Test Condition  
Minimum  
Typical  
Maximum Units  
LVDS.  
4
J
Period Jitter, RMS  
LVPECL.  
LVCMOS.  
LVDS.  
5.12  
3.3  
ps  
ps  
ps  
ps  
fs  
PER  
F
F
F
F
F
= 125MHz.  
= 125MHz.  
= 125MHz.  
= 125MHz.  
= 125MHz.  
OUT  
OUT  
OUT  
OUT  
OUT  
1.4  
R
D
Random Jitter  
LVPECL.  
LVCMOS.  
LVDS.  
1.36  
1.3  
J
J
J
9.2  
Deterministic Jitter  
Total Jitter  
LVPECL.  
LVCMOS.  
LVDS.  
10  
6.7  
29.2  
29.3  
25.6  
1040  
1200  
850  
T
LVPECL.  
LVCMOS.  
LVDS.  
f
Phase Jitter (12kHz–20MHz)  
LVPECL.  
LVCMOS.  
JITTER  
Notes for all AC Electrical Characteristics tables:  
1 All jitter values provided at 156.25MHz, unless noted otherwise.  
©2018 Integrated Device Technology, Inc.  
10  
September 7, 2018  
XL Datasheet  
Output Waveforms – LVDS  
Output Levels/Rise Time/Fall Time Measurements  
TF  
TR  
OUTPUT 2  
50% VPP  
20% to 80% VPP  
VOS  
VOD  
OUTPUT 1  
Oscillator Symmetry  
Ideally, Symmetry should be 50/50 for ½ period –Other expressions are 45/55 or 55/45  
VOH  
OUTPUT 2  
50% VPP  
OUTPUT 1  
VOL  
½ Period  
Period  
Output Waveforms – LVPECL  
Rise Time/Fall Time Measurements  
TF  
TR  
VOH  
OUTPUT 2  
20% to 80% VPP  
OUTPUT 1  
VOL  
Oscillator Symmetry  
VOH  
OUTPUT 2  
50% VPP  
OUTPUT 1  
VOL  
½ Period  
Period  
©2018 Integrated Device Technology, Inc.  
11  
September 7, 2018  
XL Datasheet  
Output Waveforms – LVCMOS  
©2018 Integrated Device Technology, Inc.  
12  
September 7, 2018  
XL Datasheet  
Package Outline Drawings  
The package outline drawings are appended at the end of this document and are accessible from the links below. The package  
information is the most current data available.  
www.idt.com/document/psc/js6-package-outline-50-x-32-mm-body-11-mm-thick  
www.idt.com/document/psc/jx6-package-outline-32-x-25-mm-body-09-mm-thick  
www.idt.com/document/psc/ju6-package-outline-70-x-50-mm-body-13-mm-thick  
www.idt.com/document/psc/js4-package-outline-50-x-32-mm-body-11-mm-thick  
www.idt.com/document/psc/ju4-package-outline-70-x-50-mm-body-13-mm-thick  
www.idt.com/document/psc/jx4-package-outline-32-x-25-mm-body-09-mm-thick  
Ordering Information (XO)  
XL  
L
5
3
5
125.000000  
I
Family and ASIC  
Output Type  
Package  
Voltage  
Precision  
Frequency  
Temperature Range  
2: 2.5 VDC ±5%  
3: 3.3 VDC ±5%  
I: Industrial range: 40 to +85 °C  
K:Extended industrial range: 40 to +105°C  
X: Extended commercial range: 20to +70 °C  
3: 3.2 x 2.5 mm  
5: 5.0 x 3.2 mm  
7: 7.0 x 5.0 mm  
125.000000 listed in MHz as example  
3 digits before decimal and 6 digits after decimal  
H: HCMOS Enable/Disable Pin1  
J: HCMOS Enable/Disable Pin2  
L: LVDS Enable/Disable Pin1  
M: LVDS Enable/Disable Pin2  
P: LVPECL Enable/Disable Pin1  
Q: LVPECL Enable/Disable Pin2  
000.750000 to 000.99999975kHz to 999.999kHz  
001.000000 to 009.9999991MHz to9.999999MHz  
010.000000 to 099.99999910MHz to 99.999999MHz  
100.000000 to 999.999999100MHz to 999.999999MHz  
A00.000000 to A99.9999991000MHz to 1099.999MHz  
B00.000000 to B99.9999991100MHz to 1199.999MHz  
C00.000000 to C99.999999 1200MHz to 1299.999MHz  
D00.000000 to D50.0000001300MHz to1350MHz  
X: XHCMOS Comp HCMOS Enable/Disable Pin1  
Y: XHCMOS Comp HCMOS Enable/Disable Pin2  
XL: 1,000fs jitter  
0: ±100ppm**  
5: ±50ppm**  
6: ±25ppm  
8: ±20ppm*  
* ±20ppm for X(20° to+70°C) only.  
** ±100ppm and ±50ppm for K(40°C to+105°C) only.  
©2018 Integrated Device Technology, Inc.  
13  
September 7, 2018  
XL Datasheet  
Ordering Information (VCXO)  
XL  
L
5
3
125.000000  
I
V
Family and ASIC  
Output Type  
Package  
Voltage  
Frequency  
Temperature Range  
2: 2.5 VDC ±5%  
3: 3.3 VDC ±5%  
I: Industrial range: 40 to +85 °C  
X: Extended commercial range: 20 to +70 °C  
5: 5.0 x 3.2 mm  
7: 7.0 x 5.0 mm  
125.000000 listed in MHz as example  
3 digits before decimal and 6 digits after decimal  
000.750000 to 000.999999 75kHz to 999.999kHz  
001.000000 to 009.999999 1MHz to 9.999999MHz  
010.000000 to 099.999999 10MHz to 99.999999MHz  
100.000000 to 999.999999 100MHz to 999.999999MHz  
H: HCMOS Enable/Disable  
L: LVDS Enable/Disable  
P: LVPECL Enable/Disable  
A00.000000 to A99.999999 1000MHz to 1099.999MHz  
B00.000000 to B99.999999 1100MHz to 1199.999MHz  
C00.000000 to C99.999999 1200MHz to 1299.999MHz  
D00.000000 to D50.000000 1300MHz to 1350MHz  
XL: 1,000 fs jitter  
V: VCXO option  
©2018 Integrated Device Technology, Inc.  
14  
September 7, 2018  
XL Datasheet  
Revision History  
Revision Date  
Description of Change  
September 7, 2018  
June 25, 2018  
May 4, 2018  
Updated frequency stability options value from ±20ppm to ±25ppm for -40°C to +85°C XO only.  
Updated Package Outline Drawings section.  
Added XO and VCXO options.  
Updated description and Features sections.  
Updated Package Outline Drawings section.  
Added VCXO Ordering Information decoder diagram.  
January 12, 2018  
Initial release.  
Corporate Headquarters  
Sales  
Tech Support  
www.IDT.com/go/support  
6024 Silver Creek Valley Road  
San Jose, CA 95138 USA  
www.IDT.com  
1-800-345-7015 or 408-284-8200  
Fax: 408-284-2775  
www.IDT.com/go/sales  
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the right to modify the products and/or specifications described herein at any time,  
without notice, at IDT’s sole discretion. Performance specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same  
way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability  
of IDT's products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not  
convey any license under intellectual property rights of IDT or any third parties.  
IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be rea-  
sonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.  
Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the property  
of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. Integrated Device Technology, Inc. All rights reserved.  
©2018 Integrated Device Technology, Inc.  
15  
September 7, 2018  

相关型号:

XLP536C00.000000K

LVPECL Output Clock Oscillator, 1200MHz Nom

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
IDT

XLP536C50.000000I

LVPECL Output Clock Oscillator

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
IDT

XLP536C99.999999K

LVPECL Output Clock Oscillator, 1299.999MHz Nom

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
IDT

XLP536C99.999999X

LVPECL Output Clock Oscillator, 1299.999MHz Nom

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
IDT

XLP538

IDT XO LVPECL Crystal Oscillator

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
IDT

XLP538025.000000X

OSC XO 25.000MHZ LVPECL SMD

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
IDT

XLP538999.999999X

LVPECL Output Clock Oscillator, 999.999999MHz Nom

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
IDT

XLP538C00.000000X

LVPECL Output Clock Oscillator, 1200MHz Nom

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
IDT

XLP538C99.999999X

LVPECL Output Clock Oscillator, 1299.999MHz Nom

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
IDT

XLP53V

IDT XO LVPECL Crystal Oscillator

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
IDT

XLP53V130.032000X

LVPECL Output Clock Oscillator

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
IDT

XLP53VD00.000000X

LVPECL Output Clock Oscillator, 1300MHz Nom

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
IDT