XLP536212.500JS6I [IDT]
LVPECL Output Clock Oscillator, 0.75MHz Min, 1350MHz Max, 212.5MHz Nom;型号: | XLP536212.500JS6I |
厂家: | INTEGRATED DEVICE TECHNOLOGY |
描述: | LVPECL Output Clock Oscillator, 0.75MHz Min, 1350MHz Max, 212.5MHz Nom 机械 输出元件 振荡器 |
文件: | 总11页 (文件大小:293K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
IDT XO LVPECL Crystal Oscillator
XLP
DATASHEET
General Description
Features
The XLP is an LVPECL Crystal Oscillator with 860fs typical
phase jitter over 12kHz to 20 MHz bandwidth. Available in a
wide frequency range from 0.750MHz to 1350MHz, the IDT
XLP Series Crystal Oscillator utilizes a family of proprietary
ASICs, with a key focus on noise reduction technologies.
• Frequency range: 0.750 to 1350 MHz
• Output Type: LVPECL
• Frequency Stability: ± 20ppm, ± 25ppm, ± 50ppm, or ± 100
ppm
• Supply Voltage: 2.5V or 3.3V
• Phase Jitter (1.875MHz to 20MHz): 225fs typical
• Phase Jitter (12kHz to 20MHz): 860fs typical
The 3rd order Delta Sigma Modulator reduces noise to the
levels that are comparable to traditional Bulk Quartz and SAW
oscillators. With short lead-time, low cost, low noise, wide
frequency range, excellent ambient performance, the XLP is
an excellent choice over the conventional technologies. The
XLP has stabilities as tight as ±20ppm with extremely quick
delivery for both standard and custom frequencies
• Package options: 5.0mm x 3.2mm x 1.2mm (JS6)
7.0mm x 5.0mm x 1.3mm (JU6)
• Operating Temperatures: -20°C to +70°C or -40°C to +85°C
Pin Assignment
6
1
5
4
2
3
6-pin CLCC
Pin Descriptions
Pin Number
Pin Name
Description
1
2
3
4
5
6
E/D
NC
Enable/Disable1 (0=Output Disabled)
No connect
GND
OUT
OUT2
VDD
Connect to ground
Output
Complementary Output
Supply voltage
1. Pulled high internally.
XLP REVISION B 12/10/14
1
©2014 Integrated Device Technology, Inc.
XLP DATASHEET
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the XLP. These ratings, which are standard values for
IDT commercially rated parts, are stress ratings only. Functional operation of the device at these or any other conditions above
those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions
for extended periods can affect product reliability. Electrical parameters are guaranteed only over the recommended operating
temperature range.
Item
Rating
VDD
E/D
-0.5 to +5.0 V
-0.5 V to VDD + 0.5 V
-0.5 V to VDD + 0.5 V
-55°C to 125°C
OUT
Storage Temperature
Theta Ja (Junction to Ambient)
102°C/W – Still Air
ESD Compliance
Human Body Model (HBM
Machine Model (MM)
1000V
150V
Mechanical Testing
Parameter
Mechanical Shock
Test Method
Drop from 75cm to hardwood surface–3 times
Mechanical Vibration
10~55Hz, 1.5mm amplitude, 1 minute sweep
2 hours each in 3 directions (X, Y, Z)
High Temperature Burn-in
Hermetic Seal
Under power @ 125°C for 2000 hours
He pressure: 4 ±1kgf/cm2 2 hour soak
Solder Reflow Profile
tP
10 seconds Max within
5°C of 260°C peak
260°C
Ramp up 3°C/s Max
Ramp down not
to exceed 6°C/s
225°C
180°C
50 ±10
seconds
above 225°C
reflow area
120 ±20 seconds
160°C
in pre-heating
area
25°C
400 seconds MAX from +25°C to 260°C peak
IDT XO LVPECL CRYSTAL OSCILLATOR
2
REVISION B 12/10/14
XLP DATASHEET
DC Characteristics
(V = 3.3 V ± 5%, T = - 20°C to +70°C; -40° to +85°C)
DD
A
Parameter
Symbol
IDD
Condition
Common Frequencies
Standard LVPECL load
Standard LVPECL load
Min
Typ
Max
Units
Power Supply Current
Output HIGH Voltage
Output LOW Voltage
120
mA
V
VOH
2.055
1.305
2.405
1.650
VOL
V
Enable/Disable Input HIGH Voltage
(Output enabled)*
VIH
70%VDD
V
Enable/Disable Input LOW Voltage
(Output disabled)
VIL
30%VDD
V
* A pullup resistor from pin 6 (VDD) to pin 1 (E/D) enables output when pin 1 is left open.
AC Characteristics
(V = 3.3 V ± 5%, T = - 20°C to +70°C; -40° to +85°C)
DD
A
Parameter
Symbol
Condition
Min
0.750
±20
Typ
Max
1350
±100
±100
3
Units
MHz
ppm
Output Frequency Range
Frequency Stability
FOUTR
Temperature = -20°C to +70°C
Temperature = -40°C to +85°C
Ta = 25°C
±25
ppm
Aging (1st year)
Aging (10 years)
Output Load
Ta = 25°C
10
TO VDD - 2.0V
50
Ohms
ms
Start-up Time
TST
Output valid time after VDD meets
minimum specified level
10
Output Rise Time
20% to 80% VPP
80% to 20% VPP
50%VP-P
400
400
55
ps
ps
Output Fall Time
Output Clock Duty Cycle
Output Enable/ Disable Time
Period Jitter, RMS
Random Jitter
TDTCY
TOE
JPER
RJ
45
%
100
ns
Frequency = 156.25MHz
5.80
1.29
9.3
ps
Frequency = 156.25MHz
Per MJSQ spec (Methodologies for
Jitter and Signal Quality specifications)
ps
Deterministic Jitter
Total Jitter
DJ
ps
TJ
27.7
860
ps
Phase Jitter (12kHz – 20MHz)
JITTER
NOISE
Common Frequencies
100Hz of Carrier
1kHz of Carrier
fs
Phase Noise Performance
Frequency = 156.25MHz
-80
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
-115
-117
-121
-142
-150
10kHz of Carrier
100kHz of Carrier
1MHz of Carrier
10MHz of Carrier
Output Frequency (Common)
FOUT
100MHz, 106.25MHz, 1258MHz, 150MHz, 155.52MHz, 156.25MHz, 200MHz,
212.5MHz, 250MHz, 300MHz, 312.5MHZ, 400MHz
(Contact IDT for additional frequencies)
Note: Inclusive of initial frequency accuracy, operating temperature range, supply variation, load variation, 3 times solder reflow, shock, vibration and 1 year aging at 25°C. We do not
recommend hand soldering the devices
REVISION B 12/10/14
3
IDT XO LVPECL CRYSTAL OSCILLATOR
XLP DATASHEET
DC Characteristics
(V = 2.5 V ± 5%, T = - 20°C to +70°C; -40° to +85°C)
DD
A
Parameter
Symbol
IDD
Condition
Common Frequencies
Standard LVPECL load
Standard LVPECL load
Min
Typ
Max
Units
Power Supply Current
Output HIGH Voltage
Output LOW Voltage
33
72
mA
V
VOH
1.40
0.68
VOL
V
Enable/Disable Input HIGH Voltage
(Output enabled)*
VIH
70%VDD
V
Enable/Disable Input LOW Voltage
(Output disabled)
VIL
30%VDD
V
* A pullup resistor from pin 6 (VDD) to pin 1 (E/D) enables output when pin 1 is left open.
AC Characteristics
(V = 2.5 V ± 5%, T = - 20°C to +70°C; -40° to +85°C)
DD
A
Parameter
Symbol
Condition
Min
0.750
±20
Typ
Max
1000
±100
±100
Units
MHz
ppm
ppm
Ohms
ms
Output Frequency Range
Frequency Stability
FOUTR
Temperature = -20°C to +70°C
Temperature = -40°C to +85°C
TO VDD - 2.0V
±25
Output Load
Start-up Time
50
TST
Output valid time after VDD meets
minimum specified level
10
Output Rise Time
20% to 80% VPP
80% to 20% VPP
50%VP-P
400
400
55
ps
ps
Output Fall Time
Output Clock Duty Cycle
Output Enable/ Disable Time
Period Jitter, RMS
Random Jitter
TDTCY
TOE
JPER
RJ
45
%
100
ns
Frequency = 156.25MHz
5.12
1.36
ps
Frequency = 156.25MHz
ps
Per MJSQ spec (Methodologies for
Jitter and Signal Quality specifications)
Deterministic Jitter
Total Jitter
DJ
10.0
ps
TJ
29.3
ps
Phase Jitter (12kHz – 20MHz)
JITTER
NOISE
Frequency = 156.25MHz
100Hz of Carrier
1kHz of Carrier
1200
-83.2
-106.5
-115.6
-120.2
-136.1
-145.9
fs
Phase Noise Performance
Frequency = 156.25MHz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
10kHz of Carrier
100kHz of Carrier
1MHz of Carrier
10MHz of Carrier
Output Frequency (Standards)
FOUT
100MHz, 106.25MHz, 1258MHz, 150MHz, 155.52MHz, 156.25MHz, 200MHz,
212.5MHz, 250MHz, 300MHz, 312.5MHZ, 400MHz
(Contact IDT for additional frequencies)
Note: Inclusive of initial frequency accuracy, operating temperature range, supply variation, load variation, 3 times solder reflow, shock, vibration and 1 year aging at 25°C. We do not
recommend hand soldering the devices
IDT XO LVPECL CRYSTAL OSCILLATOR
4
REVISION B 12/10/14
XLP DATASHEET
Output Waveform
Rise Time/Fall Time Measurements
TF
TR
VOH
OUTPUT 2
20% to 80% VPP
OUTPUT 1
VOL
Oscillator Symmetry
VOH
OUTPUT 2
50% VPP
OUTPUT 1
VOL
½ Period
Period
Typical Phase Noise (3.3V)
REVISION B 12/10/14
5
IDT XO LVPECL CRYSTAL OSCILLATOR
XLP DATASHEET
JS6 Package Outline and Dimensions
IDT XO LVPECL CRYSTAL OSCILLATOR
6
REVISION B 12/10/14
XLP DATASHEET
JS6 Package Outline and Dimensions (cont.)
REVISION B 12/10/14
7
IDT XO LVPECL CRYSTAL OSCILLATOR
XLP DATASHEET
JU6 Package Outline and Dimensions
IDT XO LVPECL CRYSTAL OSCILLATOR
8
REVISION B 12/10/14
XLP DATASHEET
JU6 Package Outline and Dimensions (cont.)
XLP DATASHEET
Ordering Information
XL P 5 3 5 FREQUENCY JS6 I
8
X = -20 to +70°C
I = -40 to +85°C
Blank = Cut-Tape
8 = Tape & Reel
0 = 100ppm
5 = 50ppm
6 = 25ppm
8 = 20ppm
JS6 =
5x3.2mm
JU6 =
000.750~
1350.000*
(in MHz)
L = LVDS
P = LVPECL 7 = 7x5mm
5 = 5x3.2mm 2 = 2.5V
3 = 3.3V
7x5mm
* See table or contact IDT for custom frequencies
Revision History
Rev.
A
Date
Originator Description of Change
10/17/14 B. Chandhoke Initial release.
B
12/10/14 B. Chandhoke 1. Added 7 x 5 x 1.3mm JU6 package option and package dimension/landing pattern
drawings.
2. Updated ordering information table/graphic to show JU6 package option.
IDT XO LVPECL CRYSTAL OSCILLATOR
10
REVISION B 12/10/14
Corporate Headquarters
6024 Silver Creek Valley Road
San Jose, CA 95138 USA
Sales
Tech Support
email: clocks@idt.com
1-800-345-7015 or 408-284-8200
Fax: 408-284-2775
www.IDT.com
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in
this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined
in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether
express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This
document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties.
IDT’s products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably
expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Product specification subject to change without notice. Other trademarks and service marks used herein, including protected
names, logos and designs, are the property of IDT or their respective third party owners.
Copyright ©2014 Integrated Device Technology, Inc.. All rights reserved.
相关型号:
©2020 ICPDF网 联系我们和版权申明