XLH52V125.000000X [IDT]
VCXO, CLOCK, HCMOS OUTPUT;型号: | XLH52V125.000000X |
厂家: | INTEGRATED DEVICE TECHNOLOGY |
描述: | VCXO, CLOCK, HCMOS OUTPUT 机械 输出元件 石英晶振 压控振荡器 |
文件: | 总15页 (文件大小:992K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
This part is no longer available from Fox, please contact IDT for this product.
Model: FVXO-HC52 SERIES
HCMOS 5 x 3.2mm C X O
Freq: 0.75 MHz to 180MHz
Rev. 04/08/2008
Features
XTREMELY Low Jitter
Low Cost
XPRESS Delivery
Frequency Resolution to six decimal places
Absolute Pull Range (APR) of ±50ppm
-20 to +70°C or -40 to +85°C operating temperatures
Tri-State Enable / Disable Feature
Industry Standard Package, Footprint & Pin-Out
Fully RoHS compliant
Applications
• ANY application requiring an oscillator
• SONET
Gold over Nickel Termination Finish
Serial ID with Comprehensive Traceability
• Ethernet
• Storage Area Network
• Broadband Access
VC
VDD
Enable / Disable
• Microprocessors / DSP / FPGA
• Industrial Controllers
• Test and Measurement Equipment
• Fiber Channel
FOX
Frequency
Control
Circuit
OUTPUT
XPRESSO
ASICs
GND
For more information -- Click on the drawing
Contents
page
Description
Model Selection & Part Number Guide
Electrical Characteristic
Absolute Maximums
Output Wave Characteristics
Phase Noise
2
3
4
4
5
5
6
6
6
7
8
8
9
The Fox XPRESSO Crystal Oscillator is a
breakthrough in configurable Frequency Control
Solutions. XPRESSO utilizes a family of
proprietary ASICs, designed and developed by
Fox, with a key focus on noise reduction
technologies.
Jitter
Pin Assignment
Recommended Circuit
Reflow
Mechanical Drawing and Pad Layout
Tape and Reel Specification
Label
Traceability – LOT Number & Serial Identification
RoHS Material Declaration
SGS Report
Mechanical Test
Burn-In Test
MTTF / FITS calculations
Other XPRESSO Links
Fox Contact Information
The 3rd order Delta Sigma Modulator reduces
noise to the levels that are comparable to
traditional Bulk Quartz and SAW oscillators.
The ASICs family has ability to select the output
type, input voltages, and temperature
performance features.
10
11 & 12
13
13
14
15
15
With the XPRESS lead-time, low cost, low noise,
wide frequency range, excellent ambient
performance, XpressO is an excellent choice
over the conventional technologies.
Finished XPRESSO parts are 100% final tested.
Page 1 of 15
FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 http://www.foxonline.com
EMEA Tel/Fax: +44 .1767.312632 | Asia Hong Kong Tel: +852.2854.4285 Fax +852.2854.4282
Taiwan Tel: +886.2.22073427 Fax +886.2.22073486 | Japan Tel: +81.3.3374.2079 Fax: +81.3.3374.5221
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FVXO-HC52 Series
Model Selection Guide & Fox Part Number
STEP #1: Customer selects the Model Description and provides to Fox Customer Service
Model Description
F V X O – H C 5 2 B R – 3 5 . 3 2 8 Frequency (in MHz)
Resolutions to 6 places
past the decimal point
blank = -20°C to +70°C
R = -40°C to +85°C
B = ±50ppm Absolute Pull Range
H = HCMOS
L = LVDS
C = Ceramic
Q = Quartz
5 = 5 x 3.2mm
7 = 7 x 5mm
3 = 3.3 V
2 = 2.5 V
P = LVPECL
X = HCMOS (comp 2nd Output)
STEP #2: The Fox Customer Service team provides a customer specific Part Number
for use on their Bill Of Materials (BOM). Visit FoxOnline.com for customer service.
Fox Part Number (The assigned Fox Part Number must be on the BOM – not the above Model Description)
(This will ensure receipt of the proper part)
7 9 3A – 3 5 . 3 2 8 – 2
The 1st Field
The 3rd Field
Product Code #
Fox Internally Generated Number
793A = FVXO–HC52
793 = FVXO–HC53
(If any specification changes,
the last digits change)
(The same specs for a different customer
also changes the last digits)
The 2nd Field
The Customer’s Frequency
This example, FVXO-HC52BR-35.328 = Voltage Controlled, HCMOS Output, Ceramic, 5 x 3.2mm Package, 2.5V,
±50 PPM Absolute Pull Range, -40 to +85°C Temperature Range, at 35.328 MHz
Absolute Maximum Ratings
(Useful life may be impaired. For user guidelines only, not tested.
Operation is only guaranteed for voltage and temperature specifications in Electrical Characteristics section.)
Maximum Value
Parameters
Input Voltage
Symbol
VDD
Condition
(unless otherwise noted)
–0.5V to +5.0V
–55°C to +105°C
–55°C to +125°C
125°C
Operating Temperature
Storage Temperature
Junction Temperature
ESD Sensitivity
TAMAX
TSTG
HBM
Human Body Model
> 1 kV
Page 2 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FVXO-HC52 Series
Electrical Characteristics
Maximum Value
Parameters
Frequency Range
Symbol
FO
Condition
(unless otherwise noted)
0.750 to 180.000 MHz
± 50 ppm MIN
Absolute Pull Range Note 1
Temperature Range
Supply Voltage
APR
TO
Standard operating
Optional operating
Storage
-20°C to +70°C
-40°C to +85°C
-55°C to +125°C
TSTG
VDD
Standard
2.5V ± 5%
0.75 ~ 20 MHz
20+ ~ 50 MHz
50+ ~ 100 MHz
100+ ~ 130 MHz
130+ ~ 160 MHz
160+ ~ 180 MHz
22 mA
25 mA
29 mA
32 mA
35 mA
37 mA
Input Current (@ 15pF LOAD)
IDD
Output Load
HCMOS
TS
Standard
15 pF
10 mS
100 nS
1
Start-Up Time
Output Enable / Disable Time
Moisture Sensitivity Level
Termination Finish
MSL
JEDEC J-STD-20
Au
Note 1 – Inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, aging, shock and vibration.
Frequency Control (VC) Input -- pin # 1
Maximum Value
Parameters
Symbol
Condition
0V to VDD
(unless otherwise noted)
40 ~ 75 ppm/V Typ2
± 10%
Control Voltage Tuning Slope 1
Control Voltage Linearity 2
Control Voltage Tuning Range
Modulation Bandwidth
LVC
VC
0V ~ 2.5V
BW
10 kHz Min
Nominal Control Voltage
VCNOM
@ f0
1.25V
NOTES:
1
Actual slope is affected by frequency and accuracy settings.
2
For an example of linearity, see the graph below. (The middle line represents the default Fox factory setting)
FVXO Oscillator Pull
@25°C - (range of typical responses)
200.0
150.0
100.0
50.0
0.0
-50.0
-100.0
-150.0
Vc = Voltage applied to Pin #1
Page 3 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FVXO-HC52 Series
Output Wave Characteristics
Maximum Value
(unless otherwise noted)
Parameters
Symbol
Condition
0.75 to 160 MHz
160+ to 180 MHz
0.75 to 160 MHz
160+ to 180 MHz
10% VDD
20% VDD
90% VDD MIN
80% VDD MIN
Output LOW Voltage
VOL
Output HIGH Voltage
VOH
Output Symmetry (See Drawing Below)
Output Enable (PIN # 2) Voltage
Output Disable (PIN # 2) Voltage
@ 50% VDD Level
45% ~ 55%
≥ 70% VDD
≤ 30% VDD
VIH
VIL
0.75 to 160 MHz
160+ to 180 MHz
0.75 to 160 MHz
160+ to 180 MHz
3.5 nS (10%~90% VDD
2.5 nS (20%~80% VDD
)
)
Cycle Rise Time (See Drawing Below)
TR
TF
3.5 nS 90%~10% VDD
)
(
Cycle Fall Time (See Drawing Below)
2.5 nS (80%~20% VDD
)
If 30% to 70% times are used, Rise and Fall times change to 1.5 nS from 0.75 to 250MHz
If 20% to 80% times are used, Rise and Fall times change to 2 nS from 0.75 to 150MHz
Rise Time / Fall Time Measurements
10% to 90%
0V to VDD
30% to 70%
20% to 80%
70 - 30
Times
90% - 10%
10% - 90%
80 - 20
Times
Fall Time
Rise Time
Oscillator Symmetry
Off Time
On Time
1/2 Period
1/2 Period
50% VDD
Period
Ideally, Symmetry should be 50/50 -- Other expressions are 45/55 or 55/45
Page 4 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FVXO-HC52 Series
Phase Noise
0 dBc
2.5V Phase Noise Graphs
-10dBc
-20dBc
-30dBc
-40dBc
-50dBc
-60dBc
-70dBc
-80dBc
-90dBc
(dBc / Hz) vs. offset frequency
Data Collected using HP 3048A
Four Frequencies from Jitter Tables
62.5 MHz only to 2 MHz offset Equipment Limitation
156.25MHz
125MHz
-100dBc
-110dBc
62.5 MHz
-120dBc
-130dBc
-140dBc
156.25MHz
62.5 MHz
-150dBc
-160dBc
106.25 MHz
125MHz
10
100
1k
10k
100k
1M
10M
40M
Offset Frequency (10Hz to 40MHz)
Jitter is frequency dependent. Below are typical values at select frequencies.
Phase Jitter & Time Interval Error (TIE)
Phase Jitter
T I E
Frequency
62.5 MHz
Units
pS RMS
pS RMS
pS RMS
pS RMS
(12kHz to 20MHz)
(Sigma of Jitter Distribution)
2.1
1.2
1.1
0.8
3.1
3.5
2.7
3.7
106.25 MHz
125 MHz
156.25 MHz
Phase Jitter is integrated from HP3048 Phase Noise Measurement System; measured directly into 50 ohm input; VDD = 2.5V.
TIE was measured on LeCroy LC684 Digital Storage Scope, directly into 50 ohm input, with Amherst M1 software; VDD = 2.5V.
Per MJSQ spec (Methodologies for Jitter and Signal Quality specifications)
Random & Deterministic Jitter Composition
Total Jitter (Tj)
Random (Rj) Deterministic (Dj)
Frequency
62.5 MHz
(14 x Rj) + Dj
(pS RMS)
1.3
(pS P-P)
8.4
27.6 pS
27.7 pS
25.6 pS
29.5 pS
106.25 MHz
125 MHz
1.4
8.3
1.3
6.7
1.4
156.25 MHz
9.7
Rj and Dj, measured on LeCroy LC684 Digital Storage Scope, directly into 50 ohm input, with Amherst M1 software.
Per MJSQ spec (Methodologies for Jitter and Signal Quality specifications)
Page 5 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FVXO-HC52 Series
Pin Description and Recommended Circuit
Pin #
Name
Type
Control
Logic
Function
Frequency Control by changing voltage
Enable / Disable Control of Output (0 = Disabled)
Electrical Ground for VDD
1
VC
E / D 1
GND
2
3
Ground
Output
Hi Z
4
Output
N. C.
HCMOS Oscillator Output
No Connection (Factory Use ONLY)
5
2
6
Power
Power Supply Source Voltage
VDD
NOTES:
1
2
Includes pull-up resistor to VDD to provide output when the pin (2) is No Connect.
Installation should include a 0.01µF bypass capacitor placed between VDD
(Pin 6) and GND (Pin 3) to minimize power supply line noise.
6
1
VC
VDD
0.01 F
VDD
# 1
# 2
# 3
# 6
# 5
# 4
VC
E / D 2
N. C.
Output
5
4
N C
E / D
3
GND
GND
OUT
HCMOS LOAD
(15 pF)
Terminations as viewed from the Top
Enable / Disable Control
Pin # 2 (state)
OPEN (No Connection)
Output (Pin # 4)
ACTIVE Output
ACTIVE Output
High Impedance
“1” Level VIH ≥ 70% VDD
“0” Level VIL ≤ 30% VDD
Soldering Reflow Profile (2 times Maximum at 260°C for 10 seconds MAX)
10 Seconds Max
within 5°C of 260°C peak
t
p
260°C
Ramp-Up
3°C/s Max
Ramp Down
Not to exceed 6°C/s
225°C
180°C
50±10 Seconds
Above 225°C Reflow Area
120 ± 20 Seconds
In Pre-heating Area
160°C
25°C
400 Seconds MAX from +25°C to 260°C peak
Page 6 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FVXO-HC52 Series
Mechanical Dimensional Drawing & Pad Layout
5.15 Max
#6 #5 #4
Actual part marking
is depicted.
TOP
VIEW
X PRESS
O
3.35 Max
1.4 Max
See Traceability (pg. 9)
for more information
#1 #2 #3
0.5
2.54
1.27
#1 #2 #3
#6 #5 #4
1.2
0.64
Recommended
Solder Pad Layout
2.54
0.8
1.29
2.25
1.27
1.24
Pin Connections
#1) VC
#4) Output
#5) NC
#2) E/D
#3) GND
#6) VDD
Drawing is for reference to critical specifications defined by size measurements.
Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary
Page 7 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FVXO-HC52 Series
Tape and Reel Dimensions
4.0mm
Ø1.5mm
12mm
2.15mm
8.0mm
2k Reel Dimensions
in mm
1k Reel Dimensions
in mm
2.0
2.0
120°
Ø21.0
Ø13.0
Ø21.0
255.0
Ø13.0
2.0
80.0
178.0
62.0
2.0
2.0
17.5
17.5
Labeling (Reels and smaller packaging are labeled with the below)
•
•
Fox Part Number: 793A-35.328-2
Quantity: 2000 pieces
Description: FVXO-HC52BR-35.328
793A-35.328-2
•
FVXO-HC52BR-35.328
•
Date Code
0745
(YYWW 2007 45th wk)
•
LOT #
24435
If traceability should become necessary
An additional identification code is contained internally if tracking should ever be necessary
Page 8 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FVXO-HC52 Series
Traceability – LOT Number & Serial Identification
LOT Number
The LOT Number has direct ties to the customer purchase order. The LOT Number is marked on the
“Reel” label, and also stored internally on non-volatile memory inside the XPRESSO part. XPRESSO parts
that are shipped Tape and Reel, are also placed in an Electro Static Discharge (ESD) bag and will have the
LOT Number labeled on the exterior of the ESD bag.
It is recommended that the XPRESSO parts remain in this ESD bag during storage for protection and
identification.
If the parts become separated from the label showing the LOT Number, it can be retrieved from inside one
of the parts, and the information that can be obtained is listed below:
•
•
•
•
•
Customer Purchase Order Number
Internal Fox Sales Order Number
Dates that the XPRESSO part was shipped from the factory
The assigned customer part number
The specification that the part was designed for
Serial Identification
The Serial ID is the individualized information about the configuration of that particular XPRESSO part. The
Serial ID is unique for each and every XPRESSO part, and can be read by special Fox equipment.
With the Serial ID, the below information can be obtained about that individual, XPRESSO part:
•
•
•
•
•
•
•
Equipment that the XPRESSO part was configured on
Raw material used to configure the XPRESSO part
Traceability of the raw material back to the foundries manufacturing lot
Date and Time that the part was configured
Any optimized electrical parameters based on customer specifications
Electrical testing of the actual completed part
Human resource that was monitoring the configuration of the part
Fox has equipment placed at key Fox locations World Wide to read the Lot Identification and Serial
Number of any XPRESSO part produced and can then obtain the information from above within 24 hours
Page 9 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FVXO-HC52 Series
RoHS Material Declaration
Material Name
Kovar
Component
Nickel (Ni)
Content
(mg)
Content
(wt%)
(CAS Number)
7440-02-0
7440-48-4
7439-89-6
1344-28-1
14808-60-7
1308-38-9
18868-43-4
1309-48-4
1305-78-8
7440-33-7
7439-98-7
7440-02-0
7440-48-4
7440-57-5
7439-89-6
7440-02-0
7440-48-4
7440-22-4
7440-50-8
7429-90-5
7440-21-3
7440-57-5
7440-22-4
Cover
Base
1.890
3.09%
1.82%
Cobalt (Co)
1.113
Iron (Fe)
3.540
5.78%
Ceramic
Alumina (Al2O3)
35.484
1.733
57.98%
2.83%
Silicon Oxide (SiO2)
Chromium Oxide (Cr2O3)
Molybdenum Oxide (MoO2)
Magnesium Oxide (MgO)
Calcium Oxide (CaO)
Tungsten (W)
0.268
0.44%
0.364
0.59%
0.234
0.38%
0.253
0.41%
+ Metallization
6.290
10.28%
0.32%
Molybdenum (Mo)
0.195
+ Nickel Plating Nickel (Ni)
Cobalt (Co)
0.810
1.32%
0.203
0.33%
+ Gold Plating
Gold (Au)
0.281
0.46%
+Seal ring
Iron (Fe)
2.438
3.98%
Nickel (Ni)
Cobalt (Co)
Silver (Ag)
Copper (Cu)
Aluminum (Al)
Silicon (Si)
Gold (Au)
1.309
2.14%
0.768
1.25%
+silver solder
1.191
1.95%
0.210
0.34%
IC
IC
0.0021
0.950
0.00343%
1.55%
Gold
0.480
0.784%
0.000343%
0.0001144%
1.91%
Adhesive
Silver (Ag)
Epoxy
0.000210
0.0000700
1.170
Crystal
TOTAL
Crystal
Silicon Dioxide (SiO2)
Silver (Ag)
Nickel (Ni)
Silver (Ag)
Silicon (Si)
14808-60-7
7440-22-4
7440-02-0
7440-22-4
7440-21-3
Electrode
0.019
0.0310%
0.000260%
0.000605%
0.000204%
100.00%
0.000159
0.00037
0.000125
61.196
Adhesive
Page 10 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FVXO-HC52 Series
3rd Party (SGS) Material Report
Page 11 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FVXO-HC52 Series
3rd Party (SGS) Material Report (continued)
Page 12 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FVXO-HC52 Series
Mechanical Testing
Parameter
Test Method
Mechanical Shock
Drop from 75cm to hardwood surface – 3 times
10~55Hz, 1.5mm amplitude, 1 Minute Sweep
2 Hours each in 3 Directions (X, Y, Z)
Mechanical Vibration
High Temperature Burn-in
Hermetic Seal
Under Power @ 125°C for 2000 Hours (results below)
He pressure: 4 ±1 kgf / cm2 2 Hour soak
2,000 Hour Burn-In
Burn-In Testing – under power 2000 Hours, 125°C
XpressO HCMOS Burn-In (Power on)
Freq = 10MHz, N = 120
10
5
0
-5
-10
Initial
250 hours 500 hours
1000
hours
2000
hours
Page 13 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FVXO-HC52 Series
MTTF / FITS Calculations
Products are grouped together by process for MTTF calculations.
(All XpressO output and package types are manufactured with the same process)
Number of Parts Tested:
Number of Failures: 0
360 (120 of each output type: HCMOS, LVDS, LVPECL)
Test Temperature: 125°C
Number of Hours:
2000
MTTF was calculated using the following formulas:
[1.] Device Hours (devhrs) = (number of devices) x (hours at elevated temperature in °K)
devhrs× af × 2
[2.] MTTF =
χ2
1
[3.] FITS =
* 109
MTTF
Where:
Label
Name
Formula/Value
eV
k
1 1
)×( −
t1 t2
)
e(
af
Acceleration Factor
eV
k
Activation Energy
0.40 V
8.62 X 10-5 eV/°K
Bolzman’s Constant
t1
t2
Θ
r
Operating Temperature (°K)
Accelerated Temperature (°K)
Confidence Level (60% industry standard)
Number of failed devices
Theta
Failures
DEVICE-HOURS = 360 x 2000 HOURS = 720,000
0.40
1
1
(
)×(
−
)
8.625
298 398
ACCELERATION FACTOR =
= 49.91009
e
720,000× 49.91009× 2
MTTF =
= 39,209,238 Hours
1.833
1.833
Failure Rate =
= 2.55E-8
720,000× 49.91009× 2
FITS = Failure Rate *1E9 = 26
Page 14 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
This part is no longer available from Fox, please contact IDT for this product.
FVXO-HC52 Series
Notes :
For the complete product line of XPRESSO products visit
http://www.foxonline.com/xpressomain.htm
Patent Numbers:
US 6,664,860, US 5,960,403, US 5,952,890; US 5,960,405; US 6,188,290;
Foreign Patents: R.S.A. 98/0866, R.O.C. 120851; Singapore 67081, 67082; EP 0958652
China ZL 98802217.6, Malaysia MY-118540-A, Philippines 1-1998-000245, Hong Kong #HK1026079, Mexico #232179
US and Foreign Patents Pending
XpressO™ Fox Electronics
Contact Information
Fox Hong Kong
Fox Japan
Tel: +852.2854.4285,
Tel:+81.3.3374.2079,
Fax: +81.3.3377.5221
Email: www.foxonline.com/email.htm
(USA)-Worldwide Headquarters
Tel: 888-GET-2-FOX
Fax:+852.2854.4282
Email: www.foxonline.com/email.htm
Outside US: +1.239.693.0099,
Fax:+1.239.693.1554
Fox EMEA
Fox Taiwan
Email: www.foxonline.com/email.htm
Tel/Fax: +44.1767.312632
Email: www.foxonline.com/email.htm
Tel:+886-2-22073427,
Fax:+886-2-22073486
Email: www.foxonline.com/email.htm
The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication; however, no
responsibility is assumed by Fox Electronics for inaccuracies.
Page 15 of 15
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
相关型号:
©2020 ICPDF网 联系我们和版权申明