IDTXXLVT4245APG [IDT]
CMOS OCTAL BUS TRANSCEIVER AND 3.3V TO 5V SHIFTER WITH 3-STATE OUT-PUTS AND 5 VOLT TOLERANT I/O; CMOS八路总线收发器和具有三态输出 - 将3.3V至5V移位器和5V兼容的I / O型号: | IDTXXLVT4245APG |
厂家: | INTEGRATED DEVICE TECHNOLOGY |
描述: | CMOS OCTAL BUS TRANSCEIVER AND 3.3V TO 5V SHIFTER WITH 3-STATE OUT-PUTS AND 5 VOLT TOLERANT I/O |
文件: | 总8页 (文件大小:79K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CMOS OCTAL BUS
IDT74LVC4245A
TRANSCEIVER AND 3.3V TO 5V
SHIFTER WITH 3-STATE OUT-
PUTS AND 5 VOLT TOLERANT I/O
DESCRIPTION:
FEATURES:
The LVC4245A is manufactured using advanced dual metal CMOS
• 0.5 MICRON CMOS Technology
• VCCA = 5V ± 0.5V
technology. Thisoctalnoninvertingbustransceivercontainstwoseparate
supplyrails; BporthasVCCB,whichissetat3.3V,andAporthasVCCA,which
issetat5V. Thisallowsfortranslationfroma3.3Vtoa5Venvironment, and
vice-versa.
Thisdeviceisidealforasynchronouscommunicationbetweentwobuses
(AandB). Thedirectioncontrolpin(DIR)controlsthedirectionofdataflow.
Theoutputenablepin(OE)overridesthedirectioncontrolanddisablesboth
ports. All inputs are designed with hysteresis for improved noise margin.
The LVC4245A has been designed with a ±24mA output driver. This
driver is capable of driving a moderate to heavy load while maintaining
speedperformance.
• VCCB = 2.7V to 3.6V
• CMOS power levels (0.4µ W typ. static)
• Rail-to-rail output swing for increased noise margin
• All inputs, outputs, and I/O are 5V tolerant
• Supports hot insertion
• Available in SOIC, SSOP, QSOP, and TSSOP packages
DRIVE FEATURES:
• High Output Drivers: ±24mA
• Reduced system switching noise
APPLICATIONS:
• 5V and 3.3V mixed voltage systems
• Data communication and telecommunication systems
FUNCTIONALBLOCKDIAGRAM
2
DIR
22
OE
3
A1
21
B1
4
A2
20
B2
5
A3
19
B3
6
A4
18
B4
7
A5
17
B5
8
A6
16 B6
9
A7
15
B7
10
A8
14
B8
TheIDTlogoisaregisteredtrademarkofIntegratedDeviceTechnology,Inc.
INDUSTRIAL TEMPERATURE RANGE
JULY 2000
1
© 2000 Integrated Device Technology, Inc.
DSC-4754/1
IDT74LVC4245A
CMOSOCTALBUSTRANSCEIVERAND3.3VTO5VSHIFTER
INDUSTRIALTEMPERATURERANGE
PINCONFIGURATION
ABSOLUTEMAXIMUMRATINGS
(1)
FOR VCCB OR VCCB
Symbol
VTERM
TSTG
Description
Max
Unit
V
24
23
22
21
20
19
18
17
16
15
14
13
1
VCCB (3.3V)
(5V) VCCA
DIR
Terminal Voltage with Respect to GND
Storage Temperature
–0.5 to +6.5
–65 to +150
–50 to +50
–50
°C
mA
mA
VCCB (3.3V)
2
3
4
IOUT
DC Output Current
OE
B1
A1
A2
IIK
IOK
Continuous Clamp Current,
VI < 0 or VO < 0
ICC
ISS
Continuous Current through each
VCC or GND
±100
mA
B2
A3
A4
5
NOTE:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation
of the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
B3
6
B4
A5
7
B5
8
A6
B6
9
A7
CAPACITANCE (TA = +25°C, F = 1.0MHz)
B7
A8
10
11
12
Symbol
Parameter(1)
Conditions
VIN = 0V or VCCA
VCCA = Open
Typ. Max. Unit
B8
GND
GND
CIN
Input Capacitance
5
—
—
—
pF
pF
pF
GND
CI/O
CI/O
I/O Port Capacitance(2) VOUT = VCCA or GND 11
VCCA = 5V
SOIC/ SSOP/ QSOP/ TSSOP
TOP VIEW
I/O Port Capacitance(3) VIN = VCCB or GND
VCCB = 3.3V
11
NOTES:
1. As applicable to the device type.
2. For A port only.
3. For B port only.
PINDESCRIPTION
Pin Names
Description
OE
DIR
Ax
Output Enable Input (Active LOW)
Direction Control Input
Port A Inputs or 3-State Outputs
Port B Inputs or 3-State Outputs
Bx
FUNCTIONTABLE(1)
Inputs
OE
DIR
Outputs
L
L
L
Bus B Data to Bus A
Bus A Data to Bus B
H
H
X
HighZstate
NOTE:
1. H = HIGH Voltage Level
L = LOW Voltage Level
X = Don’t Care
2
IDT74LVC4245A
CMOSOCTALBUSTRANSCEIVERAND3.3VTO5VSHIFTER
INDUSTRIALTEMPERATURERANGE
DCELECTRICALCHARACTERISTICSOVEROPERATINGRANGE(APORT)
FollowingConditionsApplyUnlessOtherwiseSpecified:
Operating Condition: TA = –40°C to +85°C, VCCA = 5V ± 0.5V(1)
Symbol
Parameter
Test Conditions
Min.
Typ.(2)
Max.
Unit
VIH
Input HIGH Voltage Level
VCCA = 4.5V to 5.5V
2
—
—
V
VIL
IIH
IIL
Input LOW Voltage Level
Input Leakage Current
VCCA = 4.5V to 5.5V
VCCA = 5.5V
—
—
—
—
0.8
V
VI = 0 to 5.5V
±1
µA
IOZH
IOZL
High Impedance Output Current
(3-State Output pins)
VCCA = 5.5V
VO = 0 to 5.5V
—
—
±5
µA
VH
Input Hysteresis
VCCA = 5V
—
—
100
—
—
80
mV
µA
ICCL
ICCH
ICCZ
Quiescent Power Supply Current
VCCA = 5.5V
VIN = GND or VCCA
∆ICC
Quiescent Power Supply Current
Variation
One input at 3.4V, other inputs at VCCA or GND
VCCA = 4.5V to 5.5V
—
—
1.5
mA
NOTES:
1. VCCB = 2.7V to 3.6V.
2. Typical values are at VCCA = 5V, +25°C ambient.
DCELECTRICALCHARACTERISTICSOVEROPERATINGRANGE(BPORT)
FollowingConditionsApplyUnlessOtherwiseSpecified:
Operating Condition: TA = –40°C to +85°C, VCCB = 2.7V to 3.6V(1)
Symbol
Parameter
Test Conditions
Min.
Typ.(2)
Max.
Unit
VIH
Input HIGH Voltage Level
VCCB = 2.7V to 3.6V
2
—
—
V
VIL
Input LOW Voltage Level
High Impedance Output Current
(3-State Output pins)
VCCB = 2.7V to 3.6V
VCCB = 3.6V
—
—
—
—
0.8
V
IOZH
IOZL
VO = 0 to VCCB
±5
µA
VH
Input Hysteresis
VCCB = 3.3V
VCCB = 3.6V
—
—
100
—
—
50
mV
µA
ICCL
ICCH
ICCZ
Quiescent Power Supply Current
VIN = GND or VCCB
∆ICC
Quiescent Power Supply Current
Variation
One input at VCCB - 0.6V, other inputs at VCCB or GND
VCCB = 2.7V to 3.6V
—
—
500
µA
NOTES:
1. VCCA = 5V ± 0.5V.
2. Typical values are at VCCB = 3.3V, +25°C ambient.
3
IDT74LVC4245A
CMOSOCTALBUSTRANSCEIVERAND3.3VTO5VSHIFTER
INDUSTRIALTEMPERATURERANGE
OUTPUT DRIVE CHARACTERISTICS, VCCA = 5V ± 0.5V (A PORT)
Symbol
Parameter
Output HIGH Voltage
(B Port to A Port)
TestConditions(1)
IOH = – 0.1mA
Min.
4.3
5.3
3.7
4.7
—
Max.
—
Unit
VOH
VCCA = 4.5V
VCCA = 5.5V
VCCA = 4.5V
VCCA = 5.5V
VCCA = 4.5V
VCCA = 5.5V
VCCA = 4.5V
VCCA = 5.5V
V
—
IOH = – 24mA
IOL = 0.1mA
IOL = 24mA
—
—
VOL
OutputLOWVoltage
(B Port to A Port)
0.2
0.2
0.55
0.55
V
—
—
—
NOTE:
1. VIH and VIL must be within the min. or max. range shown in the DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE table for the appropriate VCC range.
TA = – 40°C to + 85°C, VCCB = 2.7V to 3.6V.
OUTPUT DRIVE CHARACTERISTICS, VCCB = 2.7V TO 3.6V (B PORT)
Symbol
Parameter
Output HIGH Voltage
(A Port to B Port)
TestConditions(1)
Min.
Max.
—
Unit
VOH
VCCB = 2.7V to 3.6V
IOH = – 0.1mA
IOH = – 12mA
VCC – 0.2
V
VCCB = 2.7V
VCCB = 3V
2.2
2.4
2
—
—
VCCB = 3V
IOH = – 24mA
IOL = 0.1mA
IOL = 12mA
IOL = 24mA
—
VOL
OutputLOWVoltage
(A Port to B Port)
VCCB = 2.7V to 3.6V
VCCB = 2.7V
VCCB = 3V
—
—
—
0.2
0.4
0.55
V
NOTE:
1. VIH and VIL must be within the min. or max. range shown in the DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE table for the appropriate VCC range.
TA = – 40°C to + 85°C, VCCA = 5V ± 0.5V.
OPERATING CHARACTERISTICS, TA = 25°C
VCCA = 5V, VCCB = 3.3V
Symbol
CPD
Parameter
Test Conditions
Typical
39.5
5
Unit
PowerDissipationCapacitanceperTransceiverOutputsenabled
PowerDissipationCapacitanceperTransceiverOutputsdisabled
CL = 0pF, f = 10Mhz
pF
CPD
4
IDT74LVC4245A
CMOSOCTALBUSTRANSCEIVERAND3.3VTO5VSHIFTER
INDUSTRIALTEMPERATURERANGE
SWITCHINGCHARACTERISTICS(1)
VCCA = 5V ± 0.5V
VCCB = 2.7V to 3.6V
Symbol
tPLH
Parameter
Min.
1
Max.
6.3
6.7
6.1
5
Unit
PropagationDelay
Ax to Bx
ns
tPHL
1
tPLH
PropagationDelay
Bx to Ax
1
ns
ns
ns
ns
ns
tPHL
1
tPZL
tPLZ
tPZL
tPLZ
tPLZ
tPHZ
tPLZ
tPHZ
OutputEnableTime
OE to Bx
1
8.8
9.8
9
1
OutputEnableTime
OE to Ax
1
1
8.1
7.7
7.8
7
OutputDisableTime
OE to Bx
1
1
OutputDisableTime
OE to Ax
1
1
5.8
NOTE:
1. See TEST CIRCUITS AND WAVEFORMS. TA = – 40°C to + 85°C.
5
IDT74LVC4245A
CMOSOCTALBUSTRANSCEIVERAND3.3VTO5VSHIFTER
INDUSTRIALTEMPERATURERANGE
LOADCIRCUITANDVOLTAGEWAVEFORMS
PARAMETERMEASUREMENTINFORMATION(APORT)
TESTCONDITIONS
TEST
S1
2 x VCC
Open
GND
500Ω
S1
tPLH / tPHL
tPLZ /tPZL
Open
From Output
Under Test
2 x VCC
tPHZ /tPZH
GND
CL = 50pF
(see Note A)
500Ω
Load Circuit
tW
3V
Output
Control
VCC
0V
1.5V
1.5V
Input
1.5V
1.5V
0V
tPZL
tPLZ
tPHZ
Output
Waveform 1
S1 at 2 X VCC
(see Note B)
Voltage Waveforms Pulse Duration
VCC
50% VCC
tPZH
VOL+0.3V
VOL
VOH
VOH-0.3V
Output
Waveform 2
S1 at GND
50% VCC
0V
(see Note B)
VCC
1.5V
1.5V
Input
Voltage Waveforms Enable and Disable Times
Low- and High-Level Enabling
0V
tPHL
tPLH
VOH
50% VCC
50% VCC
Output
VOL
Voltage Waveforms Propagation Delay Times
Noninverting Outputs
NOTES:
A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is LOW except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is HIGH except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10MHz; Zo = 50Ω; tF ≤ 2.5ns; tR ≤ 2.5ns.
D. The outputs are measured one at a time with one transition per measurement.
6
IDT74LVC4245A
CMOSOCTALBUSTRANSCEIVERAND3.3VTO5VSHIFTER
INDUSTRIALTEMPERATURERANGE
LOADCIRCUITANDVOLTAGEWAVEFORMS
PARAMETERMEASUREMENTINFORMATION(BPORT)
TESTCONDITIONS
TEST
S1
Open
7V
7V
Open
500Ω
S1
tPLH / tPHL
tPLZ /tPZL
From Output
Under Test
GND
tPHZ /tPZH
GND
CL = 50pF
(see Note A)
500Ω
Load Circuit
tW
3V
Output
Control
3V
0V
1.5V
1.5V
Input
1.5V
1.5V
0V
tPZL
tPLZ
tPHZ
Output
Waveform 1
S1 at 7V
Voltage Waveforms Pulse Duration
3.5V
VOL+0.3V
VOL
1.5V
(see Note B)
tPZH
VOH
VOH-0.3V
Output
Waveform 2
S1 at GND
1.5V
0V
(see Note B)
3V
1.5V
1.5V
Input
Voltage Waveforms Enable and Disable Times
Low- and High-Level Enabling
0V
tPHL
tPLH
VOH
1.5V
1.5V
Output
VOL
Voltage Waveforms Propagation Delay Times
Noninverting Outputs
NOTES:
A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is LOW except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is HIGH except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10MHz; Zo = 50Ω; tF ≤ 2.5ns; tR ≤ 2.5ns.
D. The outputs are measured one at a time with one transition per measurement.
7
IDT74LVC4245A
CMOSOCTALBUSTRANSCEIVERAND3.3VTO5VSHIFTER
INDUSTRIALTEMPERATURERANGE
ORDERINGINFORMATION
IDT
XX
LVC
X
XXXX
XX
Temp. Range
Bus-Hold Device Type Package
SO
PY
Q
Small Outline IC (gull wing)
Shrink Small Outline Package
Quarter Size Small Outline Package
Thin Shrink Small Outline Package
PG
4245A
Octal Bus Transceiver and 3.3V to 5V Shifter with 3-State
Outputs, ±24mA
Blank
74
No Bus-hold
–40°C to +85°C
CORPORATE HEADQUARTERS
2975StenderWay
Santa Clara, CA 95054
for SALES:
800-345-7015 or 408-727-6116
fax: 408-492-8674
for Tech Support:
logichelp@idt.com
(408) 654-6459
www.idt.com
8
相关型号:
IDTXXLVT4245APY
CMOS OCTAL BUS TRANSCEIVER AND 3.3V TO 5V SHIFTER WITH 3-STATE OUT-PUTS AND 5 VOLT TOLERANT I/O
IDT
IDTXXLVT4245AQ
CMOS OCTAL BUS TRANSCEIVER AND 3.3V TO 5V SHIFTER WITH 3-STATE OUT-PUTS AND 5 VOLT TOLERANT I/O
IDT
IDTXXLVT4245ASO
CMOS OCTAL BUS TRANSCEIVER AND 3.3V TO 5V SHIFTER WITH 3-STATE OUT-PUTS AND 5 VOLT TOLERANT I/O
IDT
IDV02S60CXKSA1
Rectifier Diode, Schottky, 1 Phase, 1 Element, 2A, 600V V(RRM), Silicon Carbide, TO-220AC, GREEN, PLASTIC, TO-220, FULL PACK-2
INFINEON
IDV06S60CXKSA1
Rectifier Diode, Schottky, 1 Phase, 1 Element, 6A, 600V V(RRM), Silicon Carbide, TO-220AC, GREEN, PLASTIC, FULLPAK-2
INFINEON
IDV08E65D2
Rapid 2 650 V 开关, 8 A 发射控制硅功率二极管具有 TO-220 FullPAK 封装,专为开关频率在40 kHz 到 100 kHz之间的应用而设计。
INFINEON
©2020 ICPDF网 联系我们和版权申明