IDTQS3VH253PA8 [IDT]
Bus Exchanger, CB3Q/3VH/3C/2B Series, 2-Func, 4-Bit, True Output, PDSO16, TSSOP-16;
| 型号： | IDTQS3VH253PA8 |
| 厂家： | 
INTEGRATED DEVICE TECHNOLOGY |
| 描述： | Bus Exchanger, CB3Q/3VH/3C/2B Series, 2-Func, 4-Bit, True Output, PDSO16, TSSOP-16 光电二极管 逻辑集成电路 |
| 文件： | 总8页 (文件大小：109K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
QUICKSWITCH® PRODUCTS 2.5V / 3.3V
DUAL 4:1 MUX/DEMUX HIGH BAND-
WIDTH BUS SWITCH
IDTQS3VH253
FEATURES:
DESCRIPTION:
• N channel FET switches with no parasitic diode to VCC
– Isolationunderpower-offconditions
– No DC path to VCC or GND
The QS3VH253 HotSwitch Dual 4:1 multiplexer/demultiplexer is a high
bandwidthbusswitch. TheQS3VH253hasverylowONresistance,resulting
inunder250pspropagationdelaythroughtheswitch. TheSelect(Sx)inputs
controlthedataflow. Themultiplexers/demultiplexersareenabledwhenthe
Enable(EA,EB)inputsarelow. IntheONstate,theswitchescanpasssignals
up to 5V. In the OFF state, the switches offer very high impedence at the
terminals.
– 5V tolerant in OFF and ON state
• 5V tolerant I/Os
• Low RON - 4Ω typical
• Flat RON characteristics over operating range
• Rail-to-rail switching 0 - 5V
Thecombinationofnear-zeropropagationdelay,highOFFimpedence,and
over-voltage tolerance makes the QS3VH253 ideal for high performance
communicationapplications.
• Bidirectional dataflow with near-zero delay: no added ground
bounce
• Excellent RON matching between channels
• VCC operation: 2.3V to 3.6V
TheQS3VH253is characterizedforoperationfrom-40°Cto+85°C.
• High bandwidth - up to 500MHz
• LVTTL-compatible control Inputs
• Undershoot Clamp Diodes on all switch and control Inputs
• Low I/O capacitance, 4pF typical
• Available in QSOP and TSSOP packages
APPLICATIONS:
• Hot-swapping
• Multiplexing/demultiplexing
• Low distortion analog switch
• Replaces mechanical relay
• ATM 25/155 switching
FUNCTIONALBLOCKDIAGRAM
S0
S1
EA
EB
I0 A
I1 A
I2 A
I3 A
I0 B
I1 B
I2 B
I3 B
Y A
Y B
TheIDTlogoisaregisteredtrademarkofIntegratedDeviceTechnology,Inc.
INDUSTRIAL TEMPERATURE RANGE
AUGUST 2002
1
c
2002 Integrated Device Technology, Inc.
DSC-5945/9
IDTQS3VH253
INDUSTRIALTEMPERATURERANGE
2.5V/3.3VDUAL4:1MUX/DEMUXHIGHBANDWIDTHBUSSWITCH
ABSOLUTEMAXIMUMRATINGS(1)
PINCONFIGURATION
Symbol
Description
SupplyVoltage to Ground
Max
–0.5 to +4.6
–0.5 to +5.5
–0.5 to +5.5
–3
Unit
V
(2)
VTERM
(3)
VTERM
DC Switch Voltage VS
V
(3)
VTERM
DC Input Voltage VIN
V
EA
VCC
EB
S0
VAC
IOUT
AC Input Voltage (pulse width ≤20ns)
DC Output Current (max. sink current/pin)
Storage Temperature
V
1
2
3
4
5
6
16
15
14
13
120
mA
° C
S1
I3A
I2A
I1A
I0A
TSTG
–65 to +150
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation
of the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
I3B
I2B
I1B
12
11
10
9
2. VCC terminals.
3. All terminals except VCC .
I0B
YB
YA
GND
7
8
CAPACITANCE (TA = +25°C, F = 1MHz, VIN = 0V, VOUT = 0V)
Symbol
CIN
Parameter(1)
Control Inputs
Typ.
3
Max. Unit
5
6
pF
pF
CI/O
Quickswitch Channels
(Switch OFF)
Demux
Mux
4
11
12
12
15
16
16
QSOP/ TSSOP
TOP VIEW
CI/O
Quickswitch Channels
(Switch ON)
Demux
Mux
pF
NOTE:
1. This parameter is guaranteed but not production tested.
FUNCTIONTABLE(1)
Enable
Select
Outputs
PINDESCRIPTION
EA
EB
X
H
L
S1
S0
X
X
L
YA
YB
X
Function
Pin Names
I/O
Description
H
X
L
L
L
X
X
L
Z
Disable A
Disable B
S1 - 0 = 0
S1 - 0 = 1
S1 - 0 = 2
S1 - 0 = 3
Ixx
I
Data Inputs
X
Z
S0, S1
I
Select Input
Enable Input
Data Outputs
EA, EB
YA, YB
I
I0A
I0B
I1B
I2B
I3B
O
L
L
H
L
I1A
L
H
H
I2A
L
L
H
I3A
NOTE:
1. H = HIGH Voltage Level
L = LOW Voltage Level
X = Don't Care
Z = High-Impedence
2
IDTQS3VH253
INDUSTRIALTEMPERATURERANGE
2.5V/3.3VDUAL4:1MUX/DEMUXHIGHBANDWIDTHBUSSWITCH
DCELECTRICALCHARACTERISTICSOVEROPERATINGRANGE
FollowingConditionsApplyUnlessOtherwiseSpecified:
Industrial: TA = –40°C to +85°C, VCC = 3.3V ±0.3V
Symbol
Parameter
Input HIGH Voltage
Test Conditions
Min.
1.7
2
Typ.(1) Max.
Unit
VIH
GuaranteedLogicHIGH
VCC = 2.3V to 2.7V
VCC = 2.7V to 3.6V
VCC = 2.3V to 2.7V
VCC = 2.7V to 3.6V
—
—
—
—
—
—
—
6
—
—
0.7
0.8
±1
±1
±1
8
V
forControlInputs
GuaranteedLogicLOW
forControlInputs
0V ≤ VIN ≤ VCC
VIL
InputLOWVoltage
—
—
—
—
—
—
—
—
—
V
IIN
IOZ
InputLeakageCurrent(ControlInputs)
Off-StateCurrent(Hi-Z)
µA
µ A
µ A
0V ≤ VOUT ≤ 5V, Switches OFF
VIN or VOUT 0V to 5V, VCC = 0V
VCC = 2.3V
IOFF
DataInput/OutputPowerOffLeakage
VIN = 0V
VIN = 1.7V
VIN = 0V
VIN = 2.4V
ION = 30mA
ION = 15mA
ION = 30mA
ION = 15mA
RON
Switch ON Resistance
Typical at VCC = 2.5V
VCC = 3V
7
9
Ω
4
6
5
8
NOTE:
1. Typical values are at VCC = 3.3V and TA = 25°C.
IN
CC
TYPICAL ON RESISTANCE vs V AT V = 3.3V
16
14
12
RON
(ohms)
10
8
6
4
2
0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
1.0
0.0
0.5
VIN
(Volts)
3
IDTQS3VH253
INDUSTRIALTEMPERATURERANGE
2.5V/3.3VDUAL4:1MUX/DEMUXHIGHBANDWIDTHBUSSWITCH
POWERSUPPLYCHARACTERISTICS
Symbol
ICCQ
Parameter
TestConditions(1)
Min.
—
Typ.
1
Max.
4
Unit
mA
µ A
QuiescentPowerSupplyCurrent
Power Supply Current (2,3) per Input HIGH
Dynamic Power Supply Current(4)
VCC = Max., VIN = GND or VCC, f = 0
VCC = Max., VIN = 3V, f = 0 per Control Input
VCC = 3.3V, A and B Pins Open, Control Inputs
Toggling @ 50% Duty Cycle
ΔICC
—
—
30
ICCD
See Typical ICCD vs Enable Frequency graph below
NOTES:
1. For conditions shown as Min. or Max., use the appropriate values specified under DC Electrical Characteristics.
2. Per input driven at the specified level. Mux/demux pins do not contribute to ΔIcc.
3. This parameter is guaranteed but not tested.
4. This parameter represents the current required to switch internal capacitance at the specified frequency. The mux/demux inputs do not contribute to the Dynamic Power Supply
Current. This parameter is guaranteed but not production tested.
CCD
CC
TYPICAL I
vs ENABLE FREQUENCY CURVE AT V = 3.3V
6
4
2
0
0
2
4
6
8
10
12
14
16
18
20
ENABLE FREQUENCY (MHz)
4
IDTQS3VH253
INDUSTRIALTEMPERATURERANGE
2.5V/3.3VDUAL4:1MUX/DEMUXHIGHBANDWIDTHBUSSWITCH
SWITCHINGCHARACTERISTICSOVEROPERATINGRANGE
TA = -40°C to +85°C
VCC = 2.5 ± 0.2V (1)
VCC = 3.3 ± 0.3V(1)
(4)
(4)
Symbol
tPLH
Parameter
Min.
Max.
Min.
Max.
Unit
(2,3)
DataPropagationDelay
Yx to Ixx or Ixx to Yx
SelectTime
S to Yx
EnableTime
Sx to Ixx
DisableTime
Sx to Ixx
EnableTime
⎯
1.5
1.5
1.5
1.5
1.5
⎯
0.2
⎯
0.2
ns
tPHL
tSEL
9
1.5
1.5
1.5
1.5
1.5
8
9
8
8
8
ns
ns
ns
ns
ns
tPZH
tPZL
tPHZ
tPLZ
tPZH
tPZL
tPHZ
tPLZ
9
8
9
Ex to Yx or Ixx
DisableTime
Ex to Yx or Ixx
8
fExorSx
OperatingFrequency-Enable(2,5)
10
⎯
20
MHz
NOTES:
1. See Test Conditions under TEST CIRCUITS AND WAVEFORMS.
2. This parameter is guaranteed but not production tested.
3. The bus switch contributes no propagation delay other than the RC delay of the ON resistance of the switch and the load capacitance. The time constant for the switch alone
is of the order of 0.2ns at CL = 50pF. Since this time constant is much smaller than the rise and fall times of typical driving signals, it adds very little propagation delay to the
system. Propagation delay of the bus switch, when used in a system, is determined by the driving circuit on the driving side of the switch and its interaction with the load on
the driven side.
4. Minimums are guaranteed but not production tested.
5. Maximum toggle frequency for Sx or Ex control input (pass voltage > VCC, VIN = 5V, RLOAD ≥ 1MΩ, no CLOAD).
5
IDTQS3VH253
INDUSTRIALTEMPERATURERANGE
2.5V/3.3VDUAL4:1MUX/DEMUXHIGHBANDWIDTHBUSSWITCH
SOMEAPPLICATIONSFORHOTSWITCHPRODUCTS
NFET
0 to +5V
0 to +5V
+6.5V
Vcc = 3.3V
CHARGE PUMP
OE
DRIVER
SINGLE HOT
SWITCH
Rail-to-Rail Switching
MULTIPLEXING
CONTROL CIRCUITRY
1
4
MEMORY
4 BANKS
CPU
MEMORY
Multiplexing/Demultiplexing
ZERO DOWN TIME SYSTEM
PLUGGABLE CARD/ LIVE SYSTEM
ON CARD
LOGIC
CARD I/O
CPU
ON CARD
LOGIC
CARD I/O
RAM
BUS
Hot-Swapping
6
IDTQS3VH253
INDUSTRIALTEMPERATURERANGE
2.5V/3.3VDUAL4:1MUX/DEMUXHIGHBANDWIDTHBUSSWITCH
TESTCIRCUITSANDWAVEFORMS
TESTCONDITIONS
VIH
VT
0V
SAME PHASE
INPUT TRANSITION
(1)
(2)
Symbol
VLOAD
VIH
VCC = 3.3V ± 0.3V
VCC = 2.5V ± 0.2V
Unit
tPHL
tPHL
tPLH
tPLH
6
3
2 x Vcc
Vcc
V
VOH
VT
VOL
OUTPUT
V
VT
1.5
300
300
50
VCC/2
150
V
VIH
VT
0V
OPPOSITE PHASE
INPUT TRANSITION
VLZ
mV
mV
pF
VHZ
150
CL
30
Propagation Delay
VLOAD
Open
GND
VCC
DISABLE
ENABLE
VIH
VT
0V
CONTROL
INPUT
500Ω
tPZL
tPLZ
VIN
VOUT
(1, 2)
Pulse
VLOAD/2
VT
D.U.T.
VLOAD/2
VOL + VLZ
VOL
OUTPUT
NORMALLY
LOW
Generator
SWITCH
CLOSED
500Ω
tPHZ
RT
tPZH
CL
VOH
VOH -VHZ
OUTPUT
NORMALLY
HIGH
SWITCH
OPEN
VT
0V
0V
Test Circuits for All Outputs
NOTE:
1. Diagram shown for input Control Enable-LOW and input Control Disable-HIGH.
Enable and Disable Times
DEFINITIONS:
CL = Load capacitance: includes jig and probe capacitance.
RT = Termination resistance: should be equal to ZOUT of the Pulse Generator.
NOTES:
1. Pulse Generator for All Pulses: Rate ≤ 10MHz; tF ≤ 2.5ns; tR ≤ 2.5ns.
2. Pulse Generator for All Pulses: Rate ≤ 10MHz; tF ≤ 2ns; tR ≤ 2ns.
SWITCHPOSITION
Test
tPLZ/tPZL
tPHZ/tPZH
tPD
Switch
VLOAD
GND
Open
7
IDTQS3VH253
INDUSTRIALTEMPERATURERANGE
2.5V/3.3VDUAL4:1MUX/DEMUXHIGHBANDWIDTHBUSSWITCH
ORDERINGINFORMATION
IDTQS
XXXXX
XX
Package
Device Type
Q
Quarter Size Outline Package
QG
PA
PAG
QSOP - Green
Thin Shrink Small Outline Package
TSSOP - Green
2.5V / 3.3V Dual 4:1 Mux/Demux High
Bandwidth Bus Switch
3VH253
CORPORATE HEADQUARTERS
for SALES:
for Tech Support:
6024 Silver Creek Valley Road
San Jose, CA 95138
800-345-7015 or 408-284-8200
fax: 408-284-2775
logichelp@idt.com
www.idt.com
8
相关型号：
IDTQS3VH253PAG
Bus Exchanger, CB3Q/3VH/3C/2B Series, 2-Func, 4-Bit, True Output, PDSO16, GREEN, TSSOP-16
IDT
IDTQS3VH253PAGG
Bus Exchanger, CB3Q/3VH/3C/2B Series, 2-Func, 4-Bit, True Output, PDSO16, GREEN, TSSOP-16
IDT
IDTQS3VH257PA8
Bus Exchanger, CB3Q/3VH/3C/2B Series, 1-Func, 4-Bit, True Output, CMOS, PDSO16, TSSOP-16
IDT
IDTQS3VH257PAG8
Bus Exchanger, CB3Q/3VH/3C/2B Series, 1-Func, 4-Bit, True Output, PDSO16, GREEN, TSSOP-16
IDT
IDTQS3VH257Q8
Bus Exchanger, CB3Q/3VH/3C/2B Series, 1-Func, 4-Bit, True Output, CMOS, PDSO16, QSOP-16
IDT
©2020 ICPDF网 联系我们和版权申明