SBR25-12W [HY]
Silicon Passivated 3 Phase Bridge Rectifiers;型号: | SBR25-12W |
厂家: | HY ELECTRONIC CORP. |
描述: | Silicon Passivated 3 Phase Bridge Rectifiers |
文件: | 总3页 (文件大小:364K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
www.hygroup.com.tw
SBR25W SERIES
Reverse Voltage - 800 to 1600Volts
Forward Current - 25 Amperes
Silicon Passivated 3 Phase Bridge Rectifiers
Features
● Low forward voltage drop
SBRW
● High current capability
● High reliability
RoHS
COMPLIANT
●Meet UL flammability classification 94V-0
Mechanical Data
● Case: Epoxy case with heat sink
● Polarity: Symbol marked on body
● Mounting position:
● Bolt pass through the mounting hole of body
then fixto heat sink
● Mounting torque: 2 N.m
Note: Products with logo
or
are made by HY Electronic (Cayman) Limited.
Applications
● For use in high power supply inverters,servo
motor and welding machine applications
Package Outline Dimensions in Inches (Millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SBR25
-08W
800
SBR25
-10W
1000
700
SBR25
-12W
1200
840
SBR25
-14W
1400
980
SBR25
-16W
1600
1120
1600
1700
Characteristics
Symbol
Unit
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
VRRM
VRMS
VDC
V
V
V
V
A
560
800
1000
1100
1200
1300
25
1400
1500
Maximum DC Blocking Voltage
900
Peak Non-Repetitive Reverse Voltage
VRSM
I(AV)
Maximum Average Forward Rectified Current @TC=55 ℃
Peak Forward Surge Current, 8.3mS Single Half Sine-Wave,
Superimposed on Rated Load (JEDEC Method)
430
A
IFSM
I2t Rating for Fusing (t<8.3mS)
A2 S
V
I2 t
VF
767
1.1
Peak Forward Voltage per Diode at 12.5A DC
Maximum DC Reverse Current at Rated @TJ=25℃
DC Blocking Voltage per Diode @TJ=125℃
RMS lsolation Voltage from Case to Lead
Operating Junction Temperature Range
Storage Temperature Range
5
μA
mA
V
IR
3
2500
VISO
TJ
-55 to +150
-55 to +150
℃
℃
TSTG
SBR25*W-B-00/99/92-00/01
Rev. 11, 18-May-2020
Rating and Characteristic Curves
SBR25W SERIES
Fig. 1 - Forward Current Derating Curve
30
Fig. 2 - Maximum Non-Repetitive Surge Current
500
450
400
350
300
250
200
150
100
50
8.3mS Single Half-Sine-Wave
(JEDEC METOD)
25
20
15
10
5
0
0
0
50
100
150
200
1
10
100
Case Temperature (℃)
Number of Cycles at 60Hz
Fig. 4 - Typical Forward Characteristics
Fig. 3 - Typical Reverse Characteristics
2000
1000
20
10
TJ=150°C
TJ=100°C
TJ=125°C
TJ=100°C
100
10
1
TJ=25°C
1
TJ=125°C
TJ=75°C
TJ=25°C
TJ=75°C
Pulse Width 300uS
2%Duty Cycle
0
0.1
20
40
60
80
100
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
Percent of Rated Peak Reverse Voltage (%)
Instantaneous Forward Voltage (V)
The curve above is for reference only.
SBR25*W-B-00/99/92-00/01
Rev. 11, 18-May-2020
Legal Disclaimer Notice
Disclaimer
ALL specifications and data are subject to be changed without notice to improve reliability function or design or other reasons.
HY makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co-
tinuing production of any product. To the maximum extent permitted by applicable law, HY disclaims (i) any and all liability arising
out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d-
amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch-
antability.
Statements regarding the suitability of products for certain types of applications are based on HY’s knowledge of typical require-
ments that are often placed on HY products in generic applications. Such statements are not binding statements about the suitabi-
lity of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties
described in the product specification is suitable for use in a particular application.Parameters provided in datasheets and specific-
ations may vary in different applications and performance may vary over time. All operating parameters, including typical paramet-
ers, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or
otherwise modify HY’s terms and conditions of purchase, including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, HY products are not designed for use in medical, life-saving, or life-sustaining applicati-
ons or for any other applications in which the failure of the HY product could result in personal injury or death. Customers using or
selling HY products not expressly indicated for use in such applications do so at their own risk.Please contact authorized HY pers-
onnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any
conduct of HY. Product names and markings noted herein may be trademarks of their respective owners.
Rev. 11, 18-May-2020
相关型号:
©2020 ICPDF网 联系我们和版权申明