NX30TA-15PAA [HRS]
I/O Card Interface Connectors; I / O接口卡连接器型号: | NX30TA-15PAA |
厂家: | HRS |
描述: | I/O Card Interface Connectors |
文件: | 总15页 (文件大小:409K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
I/O Card Interface Connectors
NX Series
3. ESD Secure
Thermoplastic molded covers assures insulation
of the connections and shields from ESD.
4. Secure Latching
A built-in latch assures correct and secure
mating of connector.
5. Reliable Conductor Termination
Reliable termination of conductors is
accomplished by proven IDC termination.
6. Sequential Mating
The 0.8mm pitch contacts are engaging the
corresponding parts in sequence: Ground-
Power & Signal
7. Rugged Construction
Securely attached to the board with optional
screws.
■Features
1. Low Profile
8. Card Frame Kits
Protorusion above the PCB board is only 2.9mm, and the
connectors can be mounted to type I and II I/O cards.
Available as a separate part number.
9. Secure Attachment to Frame Kit.
Compliant mounting bracket attaches the
connectore directly to the frame kit.
2. EMI/RFI protection
Full metal shielding. Shield connects first, ahead of
contacts.
■Applications
Used with I/O cards, portable personal computers,and the external connections of various small-sized portable
terminals.
■Specifications
Current rating 0.5 A
Operating temperature
Operating humidity
-30ç to +70ç (Note 1) Storage temperature range -10ç to +60ç (Note 2)
Ratings
95% R.H. or less
(No condensation)
Voltage rating 125 V AC
Storage humidity range
40 to 70% (Note 2)
Item
Specification
Conditions
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
250 M ohms min.
100 V DC
No flashover or insulation breakdown.
40 m ohms max.
300 V AC / 1 minute
100 mA
No electrical discontinuity of 10µs or
more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours in each of the 3 directions.
4. Vibration
Insulation resistance: 100 M ohms min.
No damage, cracks, or parts looseness.
60 m ohms max.
5. Humidity (Steady state)
6. Temperature cycle
96 hours at temperature of 60ç and humidity of 90% to 95%
-55ç, 30 min./15 to 30ç, within 5 min/85ç, 30 min
/15 to 35ç, within 5 min, for 5 cycles
7. Durability
(Insertion/withdrawal)
3000 cycles
Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
8. Resistance to
Soldering heat
No deformation of components affecting
performance.
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during
transportation.
B8
■Materials
B
Applicable Cable
Item
Material
Finish
Remarks
I/O cable
Insulator
Thermoplastic Compound Black
UL94V-0 Conductor size
AWG # 28(7/0.127)
Receptacle Contacts
Body
Copper alloy
Stain less
Selective gold plating
Solder Plating
----
----
----
Jacket outer
diameter
0.58mm
0.62mm
UL2990
Insulator
Plug unit
Thermoplastic Compound Black
UL20276 and
UL2789
Cable style
Contacts
Copper alloy
Selective gold plating UL94V-0
Cover
Plug cover
Body
Thermoplastic Compound Black
Stainless Steel
----
UL94V-0
----
-
Frame
Thermoplastic Compound Black
Frame ground
terminal
Phosphor bronze
Gold Plating
----
Frame kit
Spring pin
Coil spring
Stainless steel
Stainless steel
-
-
----
----
With thermal
adhesive tape
Panel
Stainless steel
----
■Ordering Information
Serise name : NX
Termination style
■Receptacle
30 : IDC termination (for fine wire)
60 : SMT type
NX 60 T A - 15 S AA 9 - SP
Lock
1
2
3
11
5
6
7
8
9
T : Inner lock
Applicable Conductor
A : AWG #28
■Plug
NX 30 T A - 15 P AA
Number of contacts : 9, 15, 25, 32
Connector type
1
2
3
4
5
6
7
P : Plug
S : Receptacle
■Plug Covers
Polarizing
AA : AA type
Offset
NX - 15 T A - CV
9 : 0.9 mm
3 : 0.3 mm
1
5
3
11
10
None : On Board Type
(
Dimension from connector center line to the surface of the PCB)
■Frame Kits
Variations
SP : Compliant mounting bracket(for cards use) SH : Through hole
Types of accessories
NX - 15 T - KT 9 (05)
1
5
3
10
8
12
CV : Vertical opening cover case
CV1 : Vertical opening cover case(Thin 5 mm thinclness type)
KT : Frame kit
■Panel (For 9, 15, or 25 contacts)
NX T - P (05)
K : Frame
1
3
10
12
P : Panel (For Type2card)
PA : Panel (For Type1card)
BS : Bushing
(For 32 contacts)
CSA : Coil spring
NX - 32 T - P (05)
CSB : Coil spring
1
5
3
10
12
Serial number by type
Panel finish
No symbol : Silver matt finish
(05) : Dull Processing material
B9
B
Dimen
B
Recommended Board Dimensions
(Board Thickness: 0.5 mm Maximum)
Unit: mm
offset
0.9
Part Number
NX-09T-KT9
NX-15T-KT9
NX-25T-KT9
NX-32T-KT9
NX-09T-KT3
NX-15T-KT3
NX-25T-KT3
NX-32T-KT3
CL No.
Number of contacts
A
B
C
D
234-0010-8
234-0011-0
234-0012-3
234-0026-8
234-0034-6
234-0035-9
234-0036-1
234-0054-3
09
15
25
32
09
15
25
32
26.4 25.0 22.4 06.4
31.2 29.8 27.2 11.2
39.2 37.8 35.2 19.2
44.8 43.4 40.8 24.8
26.4 25.0 22.4 06.4
31.2 29.8 27.2 11.2
39.2 37.8 35.2 19.2
44.8 43.4 40.8 24.8
0.9
0.9
0.9
0.3
0.3
0.3
0.3
B10
■Receptacle
■0.9 mm offset type
D
P=0.8
0.3
Contact No.1
A
B
C
NX60TA-■■SAA9-SP
Unit: mm
C D
Part Number
CL No.
Number of contacts
A
B
NX60TA-09SAA9-SP 234-0106-5
NX60TB-15SAA9-SP 234-0097-6
NX60TA-25SAA9-SP 234-0107-8
NX60T0-32SAA9-SP 234-0023-0
09
15
25
32
25.2 19.7 17.2 06.4
30.0 24.5 22.0 11.2
38.0 32.5 30.0 19.2
43.6 38.1 35.6 24.8
■0.3 mm offset type
Contact No.1
NX60TA-■■SAA3-SP
Unit: mm
Part Number
CL No.
Number of contacts
A
B
C
D
NX60TA-09SAA3-SP 234-0031-8
NX60TB-15SAA3-SP 234-0098-9
NX60TA-25SAA3-SP 234-0033-3
NX60TA-32SAA3-SP 234-0053-0
09
15
25
32
25.2 19.7 17.2 06.4
30.0 24.5 22.0 11.2
38.0 32.5 30.0 19.2
43.6 38.1 35.6 24.8
B11
■Plug units
NX30TA-15PAA
CL234-0005-8
Contact No.1
Unit: mm
A B
Part Number
NX30TA-09PAA
NX30TA-15PAA
NX30TA-25PAA
NX30TA-32PAA
CL No.
Number of contacts
09
15
25
32
14.6
19.4
27.4
33.0
14.1
18.9
26.9
32.5
234-0002-0
234-0005-8
234-0008-6
234-0024-2
■Plug Covers
NX-15T-CV
CL234-0006-0
Unit: mm
Part Number
NX-09T-CV
NX-15T-CV
NX-15T-CV1
NX-25T-CV
NX-25TA-CV1
NX-32TA-CV1
CL No.
Number of contacts
A
B
C
D
E
F
G
Outer diameter of cable
less than Ø 5.5
234-0003-2
234-0006-0
234-0017-7
234-0009-9
234-0039-0
234-0025-5
09
15
15
25
25
32
18.2 21.2 14.0 26 06.0 5.5 6.5
23.0 26.0 18.8 28 07.0 6.0 7.0
23.0 26.0 18.8 28 05.0 4.0 5.0
31.0 34.0 26.8 30 08.0 6.5 7.5
31.0 34.0 26.8 32 13.0 4.0 5.0
36.6 40.6 32.4 32 16.2 4.2 5.0
less than Ø 6.0
less than Ø 4.0
less than Ø 6.5
less than Ø 6.5(Note)
less than Ø 7.5(Note)
Note: Designed for flat cable use. when round cable is used, clamp portion shall be made flat, adjusting exclusive use bushing.
B12
Frame
Cover
■Frame kit
■(Frame + 2 X Cover Panel
NX-15T-KT9
CL234-0011-0
Unit: mm
Back Connector
Connectors for the card Side(Note 1)
Part Number
CL No.
Number of contacts
Part Number
CL No.
Offset
NX-09T-KT9
NX-15T-KT9
NX-25T-KT9
NX-32T-KT9
NX-09T-KT3
NX-15T-KT3
NX-25T-KT3
NX-32T-KT3
234-0010-8
234-0011-0
234-0012-3
234-0026-8
234-0034-6
234-0035-9
234-0036-1
234-0054-3
09
15
25
32
09
15
25
32
NX60TA-09SAA9-SP
NX60TB-15SAA9-SP
NX60TA-25SAA9-SP
NX60TA-32SAA9-SP
NX60TA-09SAA3-SP
NX60TB-15SAA3-SP
NX60TA-25SAA3-SP
NX60TA-32SAA3-SP
IC1F-68RD-1.27SFA
640-0040-3
0.9mm
IC1F-68RD-1.27SFA
640-0035-3
0.3mm
■Frame only
NX-15T-F9
CL234-0019-2
Unit: mm
Part Number
NX-09T-F9
NX-15T-F9
NX-25T-F9
NX-32T-F9
NX-09T-F3
NX-15T-F3
NX-25T-F3
NX-32T-F3
CL No.
Number of contacts Connectors for the card Side
Back Connector
Panel
Coil Spring
NX-CSA
Offset
234-0018-0
234-0019-2
234-0020-1
234-0063-4
234-0060-6
234-0061-9
234-0062-1
234-0067-5
09
NX60TA-09SAA9-SP
15
NX60TB-15SAA9-SP NXT-P
NX60TA-25SAA9-SP
IC1F-68RD-1.27SFA
25
0.9mm
32
09
NX60TA-32SAA9-SP NX-32T-P
NX60TA-09SAA3-SP
NX-CSA
&
15
NX60TB-15SAA3-SP NXT-P
NX60TA-25SAA3-SP
IC1F-68RD-1.27SFA
25
0.3mm
NX-CSB
32
NX60TA-32SAA3-SP NX-32T-P
B13
2
■Panel (for type PCMCIA cards)
NXT-P
CL234-0058-4
Unit: mm
Panel Finish
Part Number
CL No.
Number of Frame contacts
NXT-P
234-0058-4
Silver matt finish
9, 15, 25
NXT-P(05)
NX-32T-P
NX-32T-P(05)
234-0058-4-05
234-0059-7
Dull processing material
Silver matt finish
32
234-0059-7-05
Dull processing material
1
■Panel (for type PCMCIA cards)
NXT-PA
CL234-2011-1
Part Number
CL No.
Number of Frame contacts
Panel Finish
Silver matt finish
NXT-PA
234-2011-1
9, 15, 25
NXT-PA(05)
NX-32T-PA
NX-32T-PA(05)
234-2011-1-05
234-0068-8
Dull processing material
Silver matt finish
32
234-0068-8-05
Dull processing material
■ Panels are avilable in two types: a 32-contact special type and a common type with 9, 15, or 25 contacts.
■ Ordering volume for panels is one panel per unit volume.One frame corresponds to 2 panels.
B14
■Ground contact spring
■Bushing
NX-CSA
NX-32T-BS
CL234-0042-4
CL234-0055-6
Part Number
NX-CSA
CL No.
Offset: Ordering Volume
Part Number
NX-25T-BS
NX-32T-BS
CL No.
Number of contacts
234-0074-0
234-0055-6
25
32
0.3mm: One Pack
0.9mm: Two Packs
234-0042-4
234-0043-7
NX-CSB
0.3mm: One Packs
Sold in package of 1000 pcs.
For 1,000 frames of 0.9 offset, please order two packs of NX-CSA.
For 1,000 frames of 0.3 offset, please order one pack of NX-CSA
and one pack of NX-CSB.
Applications for Connections of I/O Card Connectors
■Modular plugs for round cable (AWG #28) connector
Modular Plug
Manual Wiring Tool
No. of contacts
Part Number
TM30P-66P
TM30P-88P
CL No.
Part Number
CL No.
6
8
222-2684-2
222-2685-5
TC1-TM30P-66P
TC1-TM30P-88P
250-0145-6
250-0146-9
6 Contacts
8 Contacts
■8-Contact adapter
Lead Number Reference Table
TM5RL-88-JJ
CL222-3798-7
Connector (a) Contact number TM5RL-88 1
Connector (b) Contact number TM5RL-88 1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
B15
B
Plug Termination Tool
■Fixtures
Cable wiring cradle
Cutting and IDC termination
Cutting and IDC termination
attachment fixtures
NX/3230-CAT
CL902-0250-4
Fixture main unit
NX/3230-HP
CL902-0252-0
NX30TA-9GP
CL902-0253-2
NX30TA-15GP
CL902-0254-5
NX30TA-25GP
CL902-0255-8
NX30TA-32GP
CL902-0257-3
■Wiring Procedure
■
■
■
1. Set the wires in the wiring
fixtures.
2. Align holding plates (A) and
(B).
3. Arrange the wires one at a time
through holding plates (A) and
(B).
■
■
■
4. Set holding plates (A) and (B)
onto the guide plate.
5. Insert the guide plate into the
pressure welding and cutting
fixtures.
6. Pull down the handle. The
wiring and cutting of excess
cable length are completed.
B16
B
Frame Kit Fixture
Ground spring press fitting fixture
Special blocks
A frame kit thermal fixture and a cooling fixture are also available.
B
Wiring Fixture and Accessories List
Plug
Process
Pressurs Welding and Cutting
Press
Cable
Connector
Shield Case Caulking
Wiring
Hood Fitting
Manual Work
Guide Plate Cover Case
Hand Tool
NX-30TA-9HC
CL902-0260-8
NX-09T-CV0
NX30TA-09PAA
NX30TA-15PAA
NX30TA-09GP
NX-30TA-15HC
CL902-0261-0
NX-30TA-15HC1
CL902-0262-3
NX-15T-CV0
NX-15T-CV1
NX/3230-CAT
NX30TA-15GP
I/O Cable
Discrete cable
(All contacts NX/3230-HP
common)
NX-30TA-25HC1
CL902-0263-6
NX-25T-CV
NX30TA-25PAA
NX30TA-32PAA
NX30TA-25GP
NX30TA-32GP
NX-32T-CV1
Screw Fixing
Note 1: The caulking height of hand tool is defined by follwing cable specifications.
Note 2: Caulking specification change is needed when special cable is used.
Cover Case
NX-9T-CV
Cable Diameter
Ø 5.1 0.2
Strand Termination
Fold the shield and bind 1.5 times with copper tape.
NX-15T-CV
NX-25T-CV
NX-15T-CV1
Do,
Do,
Ø 5.7 0.2
Ø 6.5 0.2
Crimp with cable sheath directly.
Ø 3.8 0.2
Frame Kit
Process
Frame Kit
Spring Pin Press Fitting
Panel Thermal
Caulking
Panel Cooling
Press
Unit
NX-SPT-9
NX-9T-KT(9•3)
NX-15T-KT(9•3)
NX-25T-KT(9•3)
NX-32T-KT(9•3)
CL902-0275-5
NX-SPT-15
NX-SPT
CL902-0276-8 NX-PHT
NX-PCT
CL902-0274-2 NX-SPT-25
CL902-0277-0
CL902-0282-0 CL902-0283-3
NX-SPT-32
CL902-0278-3
B17
Back Connectors for Type II I/O Cards
■NX Series 68
■Features
1. Low profile
Receptacle connectors have a mounting height of 3.5
mm and can be mounted to type II I/O cards.
2. Shielded construction
A metal shell is used for shielding.
3. ESD protection
The use of an over-mold cover offers excellent ESD
protection.
4. More efficient wiring work
Wiring on the plug side uses AWG #30 pressure welding
(discrete type) for more efficient wiring work.
■Applications
I/O card interfaces.
■Specifications
Item
Specification
Conditions
----------
B
Applicable
1. Current rating
2. Voltage rating
0.5A
125 V AC
----------
I/O Cable
AWG #30 (7/0.1)
0.5mm
3. Insulation resistance 250 M ohms min. 100 V DC
Conductor size
Insulator outer diameter
Cable style
No flashover or insulation
breakdown.
4. Withstanding voltage 300 V AC
5. Contact resistance
UL20276
40 m ohms min. 100 mA
6. Durability (Insertion/withdrawal) 3000 cycles Contact resistance : 60 m ohms max.
■Materials
Item
Material
Finish
Color : Black
Selective gold plating
Solder plating
Color : Black
Selective gold plating
Color : Black
----------
Remarks
UL94V-0
----------
Insulator
Contacts
Body
Synthetic resin
Copper alloy
Receptacle
Stainless steel
Synthetic resin
Copper alloy
----------
Insulator
Contacts
Cover
UL94V-0
----------
Plug unit
Synthetic resin
Stainless steel
Synthetic resin
Phosphor bronze
Stainless steel
Stainless steel
Stainless steel
UL94V-0
----------
Plug cover
Body
Frame
Color : Black
Gold plating
UL94V-0
----------
FG terminal
Spring pin
Coil spring
Panel
Frame kit
----------
----------
----------
----------
With thermal adhesive tape
----------
■Ordering Information
1
2
Series name:NX
■Receptacle
Wiring style 30: Loose lead pressure welding type (for fine wire)
60: SMT type
NX 60 H - 68 S 9 - SP
1
2
3
4
5
6
7
3
4
5
Serial type for form
■Plug unit
Number of contacts: 68
NX 30 H - 68 P
Type of opening S: Receptacle
P: Plug
1
2
3
4
5
■Plug cover
6
7
8
Coplanarity: 0.9 (Dimension from connector center to board mounting position)
Variations SP: Spring pin (for cards)
Type of accessories CV: Vertical opening cover
KT: Frame kit
NX - 68 H - CV
1
4
3
8
■Frame kit
NX - 68 H - KT 9 (05)
9
Panel finish (05): Dull processing
1
4
3
8
6
9
B18
■Receptacle
+0.1
Note 1: The signal pin SMT dimension of this product is 0-0.05
.
Note 2: Caulking specification change is needed when special cable is used.
Part Number
CL No.
NX60H-68S9-SP
234-0078-1
■Plug Unit
Part Number
NX30H-68P
CL No.
234-0079-4
B19
■Plug Cover
Part Number
NX-68H-CV
CL No.
234-0080-3
■Frame Kit
Main unit
Panel
Note 1: Suitable connectors for portion A are IC1F-68RD-1.27SFA.
Suitable connectors for portion B are NX60H-68S9-SP.
Part Number
CL No.
NX-68H-KT9(05)
234-0081-6-05
B20
BRCB mounting pattern (Applicable Board Thickness: 0.5 mm MAX)
Note 1: Applicable connectors for portion A are IC1F-68RD-1.27SFA.
Applicable connectors for portion B are NX60H-68S9-SP.
B
Connector Mounting Dimensions
B21
BTemperature Profile
10s max
■
Applicable Conditions
Reflow system
Solder
: IR reflow
240
230
: Paste type 63 Sn/37 Pb
(Flux content 9 wt%)
Test board Glass epoxy 47mm x 77.3mm x 0.5 mm
Metal mask thickness: 0.15 mm
200
180
150
■
Recommended temperature profile.
The temperature may be slightly changed according to
the solder paste type and amount.
40s max
40s max
0
120s max
Preheating Time
Soldering time
Time
B22
相关型号:
©2020 ICPDF网 联系我们和版权申明