MS-180-HRMJ-F5 [HRS]
Subminiature Coaxial Switch 0.85 mm High, DC to 11 GHz;
| 型号： | MS-180-HRMJ-F5 |
| 厂家： | 
HRS |
| 描述： | Subminiature Coaxial Switch 0.85 mm High, DC to 11 GHz 连接器 |
| 文件： | 总8页 (文件大小：381K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Subminiature Coaxial Switch 0.85 mm High, DC to 11 GHz
MS-180 Series
■Overview
Developed for inspection of high frequency circuits
used in portable terminals.Verification of the circuit
performance is accomplished by simply inserting the
external plug in the board mounted receptacle.This
action re-directs the circuit from normal condition to
the plug side. Removing the plug restores circuit to
its normal condition.
The plug connector has been also downsized and
the diameter made slimmer than previous products,
to give the test tool layout a degree of freedom.
■Features
1. Low insertion loss
Space-saving design
Low profile -0.85mm protrusion above the board.
Small space-1.8mm x 1.8mm occupied board space.
0.1 dB Max. up to 3.0 GHz (not mated with the plug).
0.2 dB Max. up to 6 GHz (not mated with the plug).
0.3 dB Max. up to 11 GHz (not mated with the plug).
2. Space-saving and low profile design
0.85mm high above the board.
1.8mm x 1.8mm occupied board space.
3. Performs over a wide frequency range
Applicable frequencies range over a wide band,
from DC to 11 GHz.
4. Miniaturization of the non-implementable
area and set aperture hole
Size comparison with the existing MS-156C
The external diameter of the plug tip is as narrow as
Ø2.24mm, the non-implementable area and set
aperture hole can be minimized.
●Top view
2.3
5. Automatic board placement
1.8
Packaged on tape-and-reel the receptacles can be
placed with vacuum nozzles of the automatic
placement equipment.
2.3
1.8
38.7% saving of space
6. Beryllium Free, Halogen Free
Chlorine, and bromine are not used in the receptacles.
*Definition according to IEC 61249-2-21.
Br 900 ppm max., Cl 900 ppm max., and Br + Cl 1500
ppm max.
●Height
1.35
0.85
37% lower profile
●Weight
0.016g
0.007g
56.3% lighter weight
1
2014.10w
MS-180 Series●Subminiature Coaxial Switch 0.85 mm High, DC to 11 GHz
■Specifications
Operating temperature range
-40ç to +85ç
2W
Rated power
DC to 11 GHz
DC to 8 GHz
Frequency range
V.S.W.R.
Not mated with the plug
Mated (MS-180-HRMJ-3)
1.2 max. (DC to 3.0 GHz)
1.3 max. (3.0 GHz to 6.0 GHz)
1.4 max. (6.0 GHz to 11.0 GHz)
0.1 dB max. (DC to 3.0 GHz)
0.2 dB max. (3.0 GHz to 6.0 GHz)
0.3 dB max. (6.0 GHz to 11.0 GHz)
1.2 max. (DC to 3.0 GHz)
1.3 max. (3.0 to 8.0 GHz)
0.3 dB max. (DC to 3.0 GHz)
0.5 dB max. (3.0 GHz to 6.0 GHz)
0.6 dB max. (6.0 GHz to 8.0 GHz)
Insertion loss
Isolation
Item
25 dB min. (DC to 3.0 GHz)
20 dB min. (3.0 GHz to 6.0 GHz)
12 dB min. (6.0 GHz to 11.0 GHz)
Specification
Conditions
1. Contact resistance
2. Insulation resistance
100mø max.
1000Mø min.
100mA max.
100V DC
3. Withstanding voltage No flashover or insulation breakdown
100 V AC / 1 minute
Frequency: 10 to 55 Hz, single amplitude of 0.75mm,
10 cycles in each of the 3 axis
4. Vibration
5. Shock
No electrical discontinuity of 1 µs or more
No electrical discontinuity of 1 µs or more
Acceleration of 490m/s2, 11 ms duration, sine halfwave,
3 cycles in each of the 3 axis
Temperature : -55
ç →
+15 to +35
ç →
+85 +15°C to +35°C
ç →
ç
6. Temperature
cycle
Contact resistance: 100 mø max.
Insulation resistance: 10 Mø min.
Time: 30 2 to 3
30
2 to 3 minutes
→
→
→
100 cycles
7. High temperature Contact resistance: 100 mø max.
exposure Insulation resistance: 10 Mø min.
96 hours at 85
ç
8. Low temperature Contact resistance: 100 mø max.
96 hours at -55
ç
exposure
Insulation resistance: 10 Mø min.
9. Humidity
Contact resistance: 100 mø max.
Insulation resistance: 10 Mø min.
96 hours at 40 2 and humidity of 90 to 95%
ç
(Steady state)
10. Durability
Contact resistance: 100 mø max.
100 cycles
■Materials
Part
Material
Brass
LCP
Finish
Remarks
---------
Shell
Partially gold plating
---------
Insulator
UL94V-0
---------
Common terminal
Copper alloy
Copper alloy
Partially gold plating
Partially gold plating
Antenna terminal
---------
2
MS-180 Series●Subminiature Coaxial Switch 0.85 mm High, DC to 11 GHz
■Typical Data
●NORMALLY CLOSED(Not Mated with the plug)
Frequency[GHz]
●NORMALLY OPEN(Mated with the plug)
Frequency[GHz]
Frequency[GHz]
3
MS-180 Series●Subminiature Coaxial Switch 0.85 mm High, DC to 11 GHz
■Receptacle
1.8
Ø1.2
Part No.
MS-180
MS-180(20)
HRS No.
358-0265-7
358-0265-7 20
Packaging
15,000 pcs/reel
3,000 pcs/reel
Ｃ terminal
Ａterminal
■Circuit diagram
CdiꢀbViZYꢀl^i]ꢀi]Zꢀeaj\ꢁC#8ꢂ
BViZYꢀl^i]ꢀi]Zꢀeaj\ꢁC#Dꢂ
0.45
0.45
（0.9）
Ｇ
Ｇ
Ｇ
Ａ
Ｃ
Ｇ
Ｇ
Ａ
Ｃ
Ｇ
Ｂ
Ｇ
Ｂ
Ｇ
Eaj\
BH"&-%
Eaj\
BH"&-%
■Specified PCB mounting pattern and metalmask dimensions
2∞（1.35）
1.9
2∞0.275
2∞0.8
2∞0.275
2∞0.3
0.7
Ａterminal
0.44
1.06
0.44
Ｃ terminal
0.25
1.39
0.25
（1.94）
（1.89）
: This area must be free of conductive traces and resist field.
Note. ・Please always reflow the product using specified PCB mounting pattern and metalmask dimensions. Otherwise
it may cause solder wicking and/or flux penetration affecting the product performance.
・Do not use hand soldering for mounting of MS-180 Doing so could result in solder and flux wicking to the contact
areas.
4
MS-180 Series●Subminiature Coaxial Switch 0.85 mm High, DC to 11 GHz
BRecommended Temperature Profile
Using Lead-free Solder paste
&%hZX#bVm
: 260ç
q Maximum temperature
w Peak temperature time
e 230ç min.
ꢁꢂ
: 10 sec. max.
: 40 sec. max.
: 60 sec. to 150 sec.
: 60 sec. to 120 sec.
'+%
'(%
''%
'%%
r 220ç min.
&-%
t 180ç to 200ç
Metal mask thickness
Reflow cycles
&*%
: 0.1 mm
: 2 cycles
&%%
*%
I^bZꢁhZX#ꢂ
+%hZX#ꢀidꢀ&'%hZX#
)%hZX#ꢀbVm
+%hZX#ꢀidꢀ&*%hZX#
BPackaging Specifications
)
9
'
ꢁ&#(*ꢂ
8ꢀiZgb^cVa
8ꢀiZgb^cVa
6ꢀiZgb^cVa
6ꢀiZgb^cVa
Ｄ
JcgZZa^c\ꢀY^gZXi^dc
:
:
GZZaꢀY^bZci^dch
JcgZZa^c\ꢀY^gZXi^dc
&'#)
Part No.
MS-180
MS-180(20)
Reel size
Ø380mm
Packaging
15,000 pcs/reel
3,000 pcs/reel
Ø180mm
5
MS-180 Series●Subminiature Coaxial Switch 0.85 mm High, DC to 11 GHz
■Test adaptors with SMA connection
●Rigid body structure with mounting flange (designed for mass production testing)
32.15
8.6
1
22.65
11.75
1/4-36UNS-2A
•By using 6-10 N of force, this version will mate
vertically with the MS-180 receptacle.
•This durability rating only applies to this specific
test adaptor.
Part No.
MS-180-HRMJ-3
HRS No.
358-0318-1
Durability
10,000 cycles
●Floating version (Designed for mass production use)
-
((#'*
'(#,*
&
-#*
+#'
Higd`ZꢀgVc\Z
'&#,*"''#,*
&$)"(+JCH"'6
•The test adaptor will mate vertically with the
MS-180 receptacle. Please note the specified
stroke length.
Part No.
HRS No.
358-0321-6
Durability
•This durability rating only applies to this specific
test adaptor.
MS-180-HRMJ-F5
10,000 cycles
6
MS-180 Series●Subminiature Coaxial Switch 0.85 mm High, DC to 11 GHz
■Plugs and Plug Assemblies
●Friction locking version (Designed for prototype/manual evaluation use)
14.32
1.3
6.12
2
4.8
Part No.
HRS No.
Durability
MS-180-040LP-H3
358-0319-4
500 cycles
•The plugs locking system provides the retention
force needed between the plug and the MS-180
receptacle to manually test the application.
Vertical mating required for testing.
100
•This durability rating only applies to this specific
plug.
•This product is sold as a complete assembly;
please make your selection from the products
shown on the right. Customization is available
for cable assemblies; please contact your local
Hirose Sales Representative for the availability
of special cable lengths and other options being
offered.
1/4-36UNS-2A
Part No.
HRS No.
Durability
MS180LH3-HRMJ-040V100
362-0224-9 01
500 cycles
●Positive locking version (Designed for prototype/manual evaluation use)
22.1
1.1
6.2
Ø2.5
Part No.
HRS No.
Durability
MS-180-088LP-H1
358-0269-8
500 cycles
•The plug’s locking system provides the positive
retention force needed between the plug and
the MS-180 receptacle to manually test the
application. Vertical mating required for testing.
100
•This durability rating only applies to this specific
plug.
•This product is sold as a complete assembly;
please make your selection from the products
shown on the right. Customization is available
for cable assemblies; please contact your local
Hirose Sales Representative for the availability
of special cable lengths and other options being
offered.
1/4-36UNS-2A
Part No.
MS180LH1-HRMJ-088V100
HRS No.
Durability
500 cycles
362-0223-6 01
7
MS-180 Series●Subminiature Coaxial Switch 0.85 mm High, DC to 11 GHz
BPrecautions
1. Do not use the washing process.
2.During the design phase of the device, please make sure that extra force will not be exerted onto this
connector in the event that it is dropped.
3.This product is intended to be used for circuit inspection only. Consult us if any other application is considered.
4. Plugs can be roughly classified to two types.
For mass production line automatic check (Press down type)
For manual check (With retentive lock) : Unable to be used at production line.
5. Do not use hand soldering for mounting of MS-180.
Doing so could result in solder and flux wicking to the contact areas.
6. When using a heat gun, hot plate, or similar methods, limit the temperature to 260ç applied for 10 seconds
max.
7. Please always reflow the product using specified PCB mounting pattern and metalmask dimensions.
Otherwise it may cause solder wicking and/or flux penetration affecting the product performance.
8. Please refrain from using the product in environments specifically affected by dust, high humidity, gases, very
high temperatures and very low temperatures.
9. Exercise caution as not to allow any debris to enter the board mounted MS-180 when cutting PCB.
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 10/2014. Contents are subject to change without notice for the purpose of improvements.
8
相关型号：
©2020 ICPDF网 联系我们和版权申明