MS-147-CLP-1 [HRS]
DC to 6GHz Ultra-Small Coaxial Switch; DC到6GHz的超小型同轴开关型号: | MS-147-CLP-1 |
厂家: | HRS |
描述: | DC to 6GHz Ultra-Small Coaxial Switch |
文件: | 总7页 (文件大小:124K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DC to 6GHz Ultra-Small Coaxial Switch
MS-147 Series
ꢀOutline
The ultra-small MS-147 coaxial switch series
was developed for the portable terminal interface
and for inspection of microwave boards (sub-
strates) (DC – 6GHz) used at high frequencies.
To respond to the development of portable
terminal technologies and popularization of high-
frequency applications – up to 6GHz – this
switch features low loss, low profile, and light
weight.
The switch circuit is designed so that the NC
terminal is connected to the C terminal without a
plug mated. Mating with a plug opens this
connection.
Vertical mounting structure allows the switch to
be placed near the antenna of the portable
terminal and used to inspect output and switch to
an external antenna.
ꢀFeatures
Saves board mounting space:
Low profile: Height 3.9mm
Light weight: Weight 0.11g
01. Low insertion loss
Insertion loss is as low as:
0.15dB(or less)(Typically, 0.08dB at 1GHz)
(Typically, 0.1dB at 2GHz)
02. Space saving
External dimensions are 5.8mm x 5.4mm. Saves installation
space.
03. Low profile
Switch height is 3.9mm.
MS-147(06)
04. Light weight
Switch weight is 0.11g
ꢀPlug
05. Long life
The switch is guaranteed for up to 12,000 mechanical
operations.
06. Auto insertable
Available in embossey tape-and-reel auto-insertable
format
07. Wide application range
Operating frequency from DC to 6GHz.
08. Prevention of flux float-off
MS-147-C(LP)-1
Switch structure prevents flux float-off.
09. Self-alignment
The eccentricity for plug mating is 0.5mm.
ꢀSMA conversion adapter
ꢀApplication
Wireless communication
*
(Bluetooth, IEEE 802.11)
Machines
*
(Portable terminal, notebook PC, ETC, POS terminal,
GPS terminal PDA, etc.)
MS-147-HRMJ-1
Also suitable for other high-frequency machines.
*
117
ꢀProduct Specifications
Not mated with the plug
–30 ~ +85
4 W
DC ~ 6 GHz
0.15dB Max. (DC
Mared (MS-147-HRMJ-1)
–10ç ~ +65ç
4 W
Operating temperature range
Power rating
ç
ç
Frequency range
DC ~ 6 GHz
0.2dB max. (DC
~ 2GHz)
~ 2GHz)
0.3dB max. (2GHz ~ 2.5GHz)
0.4dB max. (2.5GHz ~ 3GHz)
0.8dB max. (3GHz ~ 6GHz)
Insertion loss
Isolation
0.2dB Max. (2GHz ~ 3GHz)
0.4dB Max. (3GHz ~ 6GHz)
25dB min. (DC ~ 1GHz)
20dB min. (1GHz ~ 3GHz)
14dB min. (3GHz ~ 6GHz)
1.25
max. (DC
~ 2GHz)
1.2 Max. (DC ~ 3GHz)
1.5 Max. (3GHz ~ 6GHz)
1.3
1.4
1.9
max. (2GHz ~ 2.5GHz)
max. (2.5GHz ~ 3GHz)
max. (3GHz ~ 6GHz)
V.S.W.R.
Item
Standard
Conditions
Center 75m ohms max.
1.Contact resistance
100mA max.
100V DC
Outer 50m ohms max.
2.Insulation resistance
3.Withstanding voltage
1,000M ohms or more
100V AC / one minute
No flashover or insulation breakdown
Frequency of 10 to 55 Hz, overall amplitude of 1.5
mm for 2 hours in each of 3 directions
4. Vibration
5. Shock
No electrical discontinuity for 10µs Min.
2
Acceleration of 490 m/s , sine half-wave waveform,
3 cycles in each of the 3 axis
96 hours at temperature of 40ç and humidity of
90% to 95%
6.Humidity
Contact resistance: Center 100m ohms max.
Outer 75m ohms max.
Insulation resistance
10M ohms min.
Temperature : –55çꢀꢀ+5ç to +35ç ꢀꢀ85ç ꢀ+5ç to 35ç
7.Temperature cycle
8.Salt spray
Time:30
100 cycles
ꢀ15 max.
ꢀ 30 ꢀ 15 max.
Contact resistance: Center 100m ohms max.
Outer 75m ohms max. Exposed to 5% salt water solution for 48 hours
No excessive corrosion
9.Durability
Contact resistance: Center 100m ohms max.
Outer 75m ohms max.
12,000 cycles
(Insertion/withdrawal)
ꢀMaterials
Part
Material
Finish
Remarks
_________
Shell
Phosphor bronze
Polyamide resin
Gold plating
_________
Insulator
UL94HB
_________
Common terminal
Berylium copper
Berylium copper
Gold plating
Gold plating
_________
(
)
Board circuit side N.C terminal
118
ꢀTypical Data
ꢀNORMALLY CLOSED (N.C)~ (Not mated with the plug)
[dB]
0
0.2
0.4
INSERTION LOSS
0.6
1.6
1.5
1.4
1.3
1.2
1.1
V.S.W.R.
0.8
1.0
0.045
3.0
4.0
6.0 [GHz]
2.0
ꢀOPEN (N.O)~ (Mated with the plug)
[dB]
0
0.2
0.4
0.6
0.8
2.0
1.8
1.6
1.4
1.2
V.S.W.R.
1.0
6.0 [GHz]
0.045
2.0
3.0
4.0
ꢀISOLATION
[dB]
0
5
10
15
20
25
30
35
40
ISOLATION
45
0.045
2.0
3.0
4.0
6.0 [GHz]
119
ꢀReceptacle
ꢀCircuit diagram
Product No. MS-147 (06)
1,500 pieces per reel
5.8
0.4
G
G
G
A
G
A
B
B
C
G
C
G
G
G
Plug
MS-147
B
0.4
Ø5
Ø3.4
ꢀPCB Mounting Pattern
6.6
4
0.8
C
0.65
G
G
0.65
0.9
A
ꢀEmbossed Carrier Tape Dimensions
12
4
2
1,500 pieces per / reel
Unreeling direction
2
16.4
Unreeling direction
120
ꢀPlug
Right angle type (1.5D - HQEW)
MS-147-C(LP)-1
13.7
10.2
Ø4.8
ꢀSMA conversion adapter
MS-147-SMA jack conversion adapter
MS-147-HRMJ-1
1/4-36UNS-2A
Ø4.71
121
ꢀRecommended Temperature Profile
Temperature ç
10sec Max.
ꢀ Maximum temperature
: 240ç
ꢀ Duration of peak temperature : 10sec Max.
240
200
–
ꢀ Base peak temperature
: 220ç
235ç
ꢀ 200 or over
: 50sec Max.
: 40sec Min.
ç
–
ꢀ 150ç
160ç
160
150
100
50
0
Time (seconds)
40sec Min.
50sec Max.
ꢀExample of Application
O-ring
Note: Mounting example
ꢀRecommended Nozzle Dimensions
Ø1
Ø1.5
Ø3
122
ꢀPrecautions
1. Compatible with the following plugs.
(
)
:
MS-147-C LP -1
Plug harness type
(
)
)
Effective mating length: 0.87mm min.
SMA conversion adapter
:
MS-147-HRMJ-1
(
Effective mating length: 0.87mm min.
2. Not washable.
3. Design the mounting holes with sufficient clearance to protect the switch from being subjected to
excessive force should the board be dropped.
4. For RF interface application for portable terminals, cover the plug entry with a rubber cap to keep dust out
when no plug is inserted.
5. Be sure to fully insert the plug until it contacts part P.
P
123
相关型号:
©2020 ICPDF网 联系我们和版权申明