MF10B-WP5C01-0200 [HRS]
Fiber Optic Connector, 2 Contact(s), Single Mode, Duplex, Plug, ROHS COMPLIANT;型号: | MF10B-WP5C01-0200 |
厂家: | HRS |
描述: | Fiber Optic Connector, 2 Contact(s), Single Mode, Duplex, Plug, ROHS COMPLIANT 连接器 |
文件: | 总5页 (文件大小:520K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
Subminiature, Waterproof Duplex Fiber Optic Connectors
MF10B Series
Waterproof 2pos.
Bayonet lock
Highly reliable bayonet lock.
When jointing
Simply by turning around the
sleeve, the taper portion of the
Plug pin
pin is run on and it's easily jointed.
Sleeve
While jointed
The rear end portion of the
pin is edged, making it difficult
to remove.
Ferrule with easy-clean structure
ꢀFeatures
1. Micro miniature structure
2. Remove split sleeve
Split sleeve
1. Loosen screw and remove cover
Screw
This micro miniature twin-core waterproof connector
consists of a Ø1.25mmMU ferrule encased in an
internal housing and shell.
Cover
2. Integrated structure with excellent vibration
and shock resistance
Tool for removal of
split sleeve (optional)
Ferrule
The bayonet lock assures connectors are easily and
firmly mated. In addition, mating design resists
disengagement, resulting in excellent resistance to
vibration and shock, conforming to JIS E 4031 type 5
(vibration) and JIS E 4032 type 2 (shock) for railcar parts.
3. Clean the ferrule edge face
and reassemble.
Varied panel attachment method
3. Excellent compatibility with high-intensity,
high flexible cables.
4-point screw fix type
For the plug side, a high-intensity optical fiber cable is
available for military spec (external cable diameter Ø5
or Ø6.5 mm) is the standard specification.)
This cable is light, flexible and suitable for long-
distance link-ups in outdoor events.
* For other cables, please consult factory.
4. Structure with a cleanable ferrule end face
When cleaning the plug ferrule, remove the sleeve
from the front to expose the ferrule edge face and thus
facilitate cleaning.
Available for pitch of ellipsoidal
holes ranging from 18-20mm
Hexagon nut fix type
5. Varied panel mounting options
Square flange mounting with 4 screws in 4 positions
and internal attachment via hexagon nuts are possible.
The square flange type with 4 screws can be used for
pitches between between 18 and 20mm.
Insertable from the panel rear,
which makes it easy to
waterproof
160
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
MF10B SeriesꢀSubminiature, Waterproof Duplex Fiber Optic Connectors
ꢀSpecifications
-40ç~85ç
-25ç~75ç
Rating
Operating Temperature Range
Storage Temperature Range
Item
Test method
Requirements
Optical
characteristics
Measurement at wave length
1310 20nm(LED)
SM: 1.0 dB MAX. (Typical 0.2 dB)
GI: 0.5 dB MAX. (Typical 0.1 dB)
Insertion loss
Durability
(mating/un-mating)
1) Insertion loss fluctuation after test:0.3dB max.
2) No visible damage or components dislocation.
5,000times
A tensile force to cable axially for at
200N(Cable Dia: Ø6.5mm),
Tensile
strength(axial)
100N(Cable Dia: Ø5mm),400N(Cable with
tension member)
Mechanical
characteristics
10,000 times at 90 degree,right and left
direction.
Insertion loss range:≤0.3dB
No Looseness,breakage,cracks
Flex Resistant
Vibration
2 hours of the right and left,4 hours of the vertical direction
at an amplitude of 2.3mm and an acceleration 14.8G.
4 times and 2 directions with the acceleration
Shock
2
88m/s and length of effectiveness 0.025s.
Humidity
(Temperature/
humidity-cycles)
-10ç to +65ç, humidity: 90% to 96%
240hours. (24H/cycle∞10cycle)
1) Insertion loss fluctuation after test:0.3dB max.
2) No visible damage or components dislocation.
Temperature cycle -40ç to +75ç, 42 cycles
Environmental Dry heat
characteristics Cold
240 hours at +85ç
240 hours at _40ç
Salt mist :5% and temperature 35ç for 1000hours.
With the connector hood installed.
Put the product under water for 1min.With air
Salt mist
Water
No corrosion.
No air leakage.
resistance(mating) pressure 4.9kPa.
ꢀMaterial and Finish
Component
Material
Zinc die-casting
Synthetic resin
Synthetic rubber
Piano wire
Finishi/Remarks
Nickel plated / Chrome plated (Black)
Housing
Stopper
UL94V-0
––––––
Rubber hood
Spring
Zinc plated
––––––
Split sleeve
Zirconia
161
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
MF10B SeriesꢀSubminiature, Waterproof Duplex Fiber Optic Connectors
ꢀPlug
ꢀCable without tension member (Cable dia: Ø5mm, 6mm)
57.5
84
Part number
CL No.
Plating
Nickel
MF10B-WP5C01-0200
CL709-1020-8-00
MF10B-WP5CH01-0200 CL709-1015-8-00 Chrome(black)
MF10B-WP6.5C01-0200 CL709-1004-1-00 Nickel
MF10B-WP6.5CH01-0200 CL709-1007-0-00 Chrome(black)
ꢀCable with tension member (Cable dia: Ø7 mm)
Part number
CL No.
Plating
Nickel
MF10B-WPS7C01-0200
CL709-1018-6-00
MF10B-WPS7CH01-0200 CL709-1024-9-00 Chrome(black)
ꢀReceptacle
ꢀØ0.9 core wire, M3 screw attachment type
16
11.65
18
20
Part number
CL No.
Plating
Nickel
MF10B-WRF01-0200
MF10B-WRFH01-0200
CL709-1005-4-00
CL709-1008-2-00 Chrome(black)
162
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
MF10B SeriesꢀSubminiature, Waterproof Duplex Fiber Optic Connectors
ꢀØ2 code, M3 screw attachment type
46
16
11.65
18
20
Part number
CL No.
Plating
Nickel
MF10B-WRFC01-0200
CL709-1014-5-00
MF10B-WRFCH01-0200 CL709-1032-7-00 Chrome(black)
ꢀØ0.9 core wire, hexagon nut attachment type
16
2.5MAX(Panel thikness size)
18
20
Part number
CL No.
Plating
Nickel
MF10B-WRB01-0200
MF10B-WRBH01-0200
CL709-1010-4-00
CL709-1025-1-00 Chrome(black)
ꢀØ2 code, hexagon nut attachment type
2.5MAX(Panel thikness size)
18
20
Part number
CL No.
Plating
Nickel
MF10B-WRBC01-0200
CL709-1013-2-00
MF10B-WRBCH01-0200 CL709-1033-0-00 Chrome(black)
163
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
MF10B SeriesꢀSubminiature, Waterproof Duplex Fiber Optic Connectors
ꢀRecommended panel cutouts
20 0.05
18 0.05
M3 screw attachment type
Hexagon nut attachment type
ꢀTools
ꢀPlug assembly tool
Part number
CL No.
MF10B-WP7C01-0200/CVMD
CL902-6063-0-00
ꢀSplit sleeve removal tool
Part number
MF10B-T1
CL No.
CL709-1034-2-00
164
相关型号:
MF10B-WP6.5C01-0200
Fiber Optic Connector, 2 Contact(s), Single Mode, Duplex, Plug, ROHS COMPLIANT
HRS
©2020 ICPDF网 联系我们和版权申明