JRC-PC-112 [HRS]
Waterproof Circular Connectors;型号: | JRC-PC-112 |
厂家: | HRS |
描述: | Waterproof Circular Connectors 连接器 |
文件: | 总13页 (文件大小:823K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Waterproof Circular Connectors
JR-W Series
Features
1. Waterproof
The JR-W series is a rugged, waterproof
connector series that is IP67 and IP68 rated
in the mated condition.
IP67: Left in water at a depth of 1m for 30 minutes
IP68: Left in water at a depth of 2m for 14 days
2. Corrosion resistance
The outer shell is plated to improve corrosion
resistance, allowing this connector to be used
in various environments.
Product Specifications
Shell size
13
No. of contacts
Current rating
3
5
10A
5A
7
10A
5A
16
21
10
10
16
4
Ratings
Current rating
10A
5A
30A
10A
5A
25
16
24
Shell size
13
No. of contacts
Voltage rating
3
5
100V AC, 140V DC
7
16
21
25
100V AC, 140V DC
100V AC, 140V DC
Ratings
Voltage rating
10
10
16
4
300V AC, 420V DC
100V AC, 140V DC
16, 24
Operating
temperature
range
-25 to +85
℃
Ratings
Storage
temperature
range
-10 to +60
℃
In cases where the application will demand a high level of reliability, such as automotive,
please contact a company representative for further information.
1
2018.8⑤
JR-W Series●Waterproof Circular Connectors
Item
Specifications
Conditions
5mø max.
1. Contact resistance
Measured at DC 1A
JR16-10 contact crimping type : 10mø max.
1,000Mø min.
JR25-4 contacts : 10,000Mø min.
2. Insulation
resistance
3. Withstanding
voltage
4. Vibration
resistance
Measured at DC 500V
AC 1,000V for 1 minute
No flashover or dielectric breakdown.
JR25-4 contacts : AC 3,000V for one minute
10 to 55Hz/cycle, amplitude : 0.75mm,
3 axis derections, 2 hours each.
Acceleration : 490m/s2, duration : 11ms
6 directions, 3 times each.
No electrical discontinuity for 10µs or greater.
5. Shock resistance No electrical discontinuity for 10µs or greater.
Contact resistance : 5mø max.
6. Mating cycles
500 times
JR16-10 contact crimping type : 10mø max.
-40ç : 30 minute Normal temperature : 10 to 15
➝
Insulation resistance : 1,000Mø min.
7. Temperaure cycle
minutes 100ç : 30 minutes
➝
JR25-4 contacts : 10,000Mø min.
Normal temperature : 10 to 15 minutes, left for 5
➝
cycles
Insulation resistance:
10Mø min. (at high humidity)
8. Moisture
resistance
100Mø min. (when dry)
JR25-4 contacts:
Temperature : 40ç, relative humidity : 90 to 95%,
leave 96 hours
100Mø min. (at high humidity)
1,000Mø min. (when dry)
Mated connectors left in water at a depth of 1.8m for
48 hours.
9. Waterproof
No water penetraction into the connector.
Materials / Finish
Parts
Material
Finish
Black chromium plating
――――
Remarks
――――
UL94V-0
――――
――――
Outer shell
Aluminium alloy, brass
Phenol resin, PPS resin
Copper alloy
Insulator
Contact
Silver plating
Waterproof packing
Nitrile rubber, silicone rubber
――――
Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
Plug and receptacle
JR 13 WP A 3 P C (**)
-
q
w
e
r
t y u
o
Cord clamp
JR 13 WCC A 4 (**)
-
q
w
e
r
i
o
Model name : JR Series
q
w
e
r
t
y
Shell size Shell size is the outer shell diameter of the mating end of the plug.
:
Shell type
WP : Waterproof plug WR : Waterproof receptacle WCC : Waterproof clamp
Shell variation : Connectors are distinguished by A, B, or C if a shell variation is applied in the same form.
Number of contacts.
Contact form P : Male Contact
S : Female Contact
Contact termination method None : Solder termination
u
C
: Crimp termination
Applicable cable diameter
i
o
Other specifications : A two-digit number is added to indicate other specifications.
2
JR-W Series●Waterproof Circular Connectors
Soldering type
Plug
B
D
Spanner fitting width F
E
JR25WPH-4S
(Representative example)
No. of
contacts
3
Part No.
HRS No.
ØA
B
ØC
D
E
F
Remarks
JR13WP-3P(31)
JR13WP-5P(31)
JR16WP-7P(31)
JR16WP-10P(31)
JR21WP-10P(31)
JR21WP-16P(31)
JR25WPH-4P
114-2001-5 31
114-2002-8 31
114-2003-0 31
114-2004-3 31
114-2005-6 31
114-2006-9 31
114-2185-0
12.7
M18×1
21.8
M16×0.75
44.7
17
5
7
16.3
20.5
M22×1
M26×1
25.8
29.8
M20×0.75
M24×0.75
46.5
51
21
10
10
16
4
25.4
JR25WP-16P(31)
JR25WP-24P(31)
JR13WP-3S(31)
JR13WP-5S(31)
JR16WP-7S(31)
JR16WP-10S(31)
JR21WP-10S(31)
JR21WP-16S(31)
JR25WPH-4S
114-2010-6 31
114-2011-9 31
114-2012-1 31
114-2013-4 31
114-2014-7 31
114-2015-0 31
114-2016-2 31
114-2017-5 31
114-2183-4
16
24
3
24.7
M30×1
33.8
M28×0.75
56
29
12.7
16.3
20.5
M18×1
M22×1
M26×1
21.8
25.8
29.8
M16×0.75
M20×0.75
M24×0.75
44.7
46.5
51
17
21
5
7
10
10
16
4
25.4
JR25WP-16S(31)
JR25WP-24S(31)
114-2021-2 31
114-2022-5 31
16
24
24.7
M30×1
33.8
M28×0.75
56
29
Note 1 : Plugs must be used with cord clamps.
Note 2 : : Denotes waterproof gaskets with a silicone rubber specification
3
JR-W Series●Waterproof Circular Connectors
Receptacle (Flange type)
B
10.5
2
E
D
C
JR25WRH-4P
(Representative example)
No. of
contacts
Part No.
HRS No.
ØA
B
C
D
E
ØF
Remarks
JR13WR-3P(31)
JR13WR-5P(31)
JR16WR-7P(31)
JR16WR-10P(31)
JR21WR-10P(31)
JR21WR-16P(31)
JR25WRH-4P
114-2023-8 31
114-2024-0 31
114-2025-3 31
114-2026-6 31
114-2027-9 31
114-2028-1 31
114-2184-7
3
5
26.6
26.1
26.6
26.1
26.6
26.1
28
15.9
M18×1
26
20
16.3
7
19.9
23.9
M22×1
M26×1
29
32
23
26
20.3
24.3
10
10
16
4
JR25WR-16P(31)
JR25WR-24P(31)
JR13WR-3S(31)
JR13WR-5S(31)
JR16WR-7S(31)
JR16WR-10S(31)
JR21WR-10S(31)
JR21WR-16S(31)
JR25WRH-4S
114-2032-9 31
114-2033-1 31
114-2034-4 31
114-2035-7 31
114-2036-0 31
114-2037-2 31
114-2038-5 31
114-2039-8 31
114-2186-2
16
24
3
27.9
M30×1
26.6
26.1
28
35
29
28.3
15.9
19.9
23.9
M18×1
M22×1
M26×1
26
29
32
20
23
26
16.3
20.3
24.3
5
27
7
28
10
10
16
4
27
28
27
28
27
JR25WR-16S(31)
JR25WR-24S(31)
114-2043-5 31
114-2044-8 31
16
24
27.9
M30×1
35
29
28.3
Note 1 :
: Denotes waterproof gaskets with a silicone rubber specification
4
JR-W Series●Waterproof Circular Connectors
Soldering type
Receptacle (Front nut-tightening type)
M22×1
HEX 27
20
A
Panel cutout dimensions
(Panel thickness : 1.5mm to 6mm)
JR16WRA-7P(31)
(Representative example)
No. of
contacts
7
Part No.
HRS No.
A
JR16WRA-7P(31)
JR16WRA-10P(31)
JR16WRA-10S(31)
114-2143-0 31
114-2096-1 31
114-2145-5 31
26.6
26.1
27
10
Receptacle (Rear nut-tightening type)
Width across flats : 32mm
M28×1
M30×1
10.5
2
23
A
Panel cutout dimensions
(Panel thickness : 6.5mm max)
JRC25WRG-16P(31)
(Representative example)
No. of
A
Part No.
HRS No.
contacts
JRC25WRG-16P(31)
JRC25WRG-24P(31)
JRC25WRG-16S(31)
JRC25WRG-24S(31)
114-1032-3 31
114-1033-6 31
114-1043-0 31
114-1044-2 31
16
24
16
24
26.8
26.1
27.8
26.5
Receptacle (Rear nut-tightening type with hex nut)
Width across flats : 32mm
M28×1
M30×1
10.5
2
23
A
Panel cutout dimensions
(Panel thickness : 6.5mm max)
JR25WRHA-4P
(Representative example)
No. of
contacts
Part No.
HRS No.
A
Remarks
JR25WRHA-4P
JR25WRHA-4S
114-1136-9
114-1135-6
4
28
Note 1 :
: Denotes waterproof gaskets with a silicone rubber specification
5
JR-W Series●Waterproof Circular Connectors
Crimp type
Plug
B
D
Spanner fitting width F
E
JR21WP-10PC(31)
(Representative example)
No. of
contacts
Part No.
HRS No.
ØA
B
ØC
D
E
F
Contact dia.
JR16WP-10PC(31)
JR21WP-10PC(31)
JR16WP-10SC(31)
114-2114-1 31
114-2115-4 31
114-2122-0 31
16.3 M22×1 25.8
20.5 M26×1 29.8
16.3 M22×1 25.8
M20×0.75
M24×0.75
M20×0.75
46.5
51
46.5
21
25.4
21
1
1.6
1
10
Note 1 : Plugs must be used with cord clamps.
Receptacle(Flange type)
B
E
D
10.5
2
C
JR16WR-10PC(31)
(Representative example)
No. of
contacts
Part No.
HRS No.
ØA
B
C
D
E
ØF
Contact dia.
1
JR16WR-10PC(31)
114-2130-8 31
10
19.9
M22×1
25.1
29
23
20.3
6
JR-W Series●Waterproof Circular Connectors
Cable clamp (Standard type)
D
Spanner fitting width E
C
JR13WCC-6(71)
(Representative example)
Part No.
HRS No.
ØA
4
ØB
20
C
D
E
JR13WCC-4(31)
JR13WCC-5(31)
JR13WCC-6(71)
JR13WCC-7(31)
JR13WCC-8(31)
JR13WCC-9(31)
JR13WCC-10(31)
JR16WCC-4(71)
JR16WCC-6(71)
JR16WCC-8(71)
JR16WCC-10(71)
JR16WCC-12(71)
JR21WCC-6(31)
JR21WCC-8(31)
JR21WCC-10(31)
JR21WCC-12(31)
JR21WCC-14(31)
JR21WCC-16(31)
JR25WCC-8(71)
JR25WCC-10(71)
JR25WCC-12(31)
JR25WCC-14(31)
JR25WCC-16(31)
JR25WCC-18(71)
114-2045-0 31
114-2046-3 31
114-2047-6 71
114-2048-9 31
114-2049-1 31
114-2050-0 31
114-2051-3 31
114-2052-6 71
114-2053-9 71
114-2054-1 71
114-2055-4 71
114-2056-7 71
114-2057-0 31
114-2058-2 31
114-2059-5 31
114-2060-4 31
114-2061-7 31
114-2062-0 31
114-2063-2 71
114-2064-5 71
114-2065-8 31
114-2066-0 31
114-2067-3 31
114-2068-6 71
5
6
7
17
M16×0.75
17
8
9
10
4
6
8
23
27
M20×0.75
M24×0.75
21
10
12
6
17.5
8
10
12
14
16
8
25.4
10
12
14
16
18
31
18
M28×0.75
29
7
JR-W Series●Waterproof Circular Connectors
Cable clamp (Simple type)
D
Spanner fitting width E
C
JR21WCCA-16(31)
(Representative example)
Part No.
JR13WCCA-4(31)
JR13WCCA-5(31)
JR13WCCA-6(71)
JR13WCCA-7(31)
JR13WCCA-8(31)
JR13WCCA-9(31)
JR13WCCA-10(31)
JR16WCCA-4(71)
JR16WCCA-6(71)
JR16WCCA-8(71)
JR16WCCA-10(71)
JR16WCCA-12(71)
JR21WCCA-6(31)
JR21WCCA-8(31)
JR21WCCA-10(31)
JR21WCCA-12(31)
JR21WCCA-14(31)
JR21WCCA-16(31)
JR25WCCA-8(71)
JR25WCCA-10(71)
JR25WCCA-12(31)
JR25WCCA-14(31)
JR25WCCA-16(31)
JR25WCCA-18(71)
HRS No.
ØA
4
ØB
19
C
D
E
114-2069-9 31
114-2070-8 31
114-2071-0 71
114-2072-3 31
114-2073-6 31
114-2074-9 31
114-2075-1 31
114-2076-4 71
114-2077-7 71
114-2078-0 71
114-2079-2 71
114-2080-1 71
114-2081-4 31
114-2082-7 31
114-2083-0 31
114-2084-2 31
114-2085-5 31
114-2086-8 31
114-2087-0 71
114-2088-3 71
114-2089-6 31
114-2090-5 31
114-2091-8 31
114-2092-0 71
5
6
7
7.5
M16×0.75
17
8
9
10
4
6
8
23
27
M20×0.75
M24×0.75
21
10
12
6
8
8
10
12
14
16
8
25.4
10
12
14
16
18
31
8.5
M28×0.75
29
Note : The simple cord clamp does not have the cable clamping ability as the standard cable clamp does. We recommend that
you make sure that the clamping capability of the simple cord clamp is sufficient for your application.
8
JR-W Series●Waterproof Circular Connectors
Cap (Without a chain)
ØA
JR16WRC(31)
C
(Representative example)
Part No.
JR13WRC4
HRS No.
ØA
21
B
7
C
Remarks
114-2192-5
M18×1
JR13WRC5
114-2105-0
7.5
,
,
Plastic shell
JR16WRC(31)
JR16WRC(75)
JR25WRC(31)
JR25WRC(75)
JR25WRC5
114-2162-4 31
114-2162-4 75
114-2163-7 31
114-2163-7 75
114-2175-6
25
33
M22×1
M30×1
7
7.5
Plastic shell
Note 1 :
: Denotes waterproof gaskets with a silicone rubber specification
Cap (With a chain)
80
C
JR25WRC3
ØA
(Representative example)
Part No.
HRS No.
ØA
21
25
33
B
C
Remarks
JR13WRC3
JR16WRC3
JR25WRC3
114-2170-2
114-2171-5
114-2172-8
M18×1
M22×1
M30×1
11.5
Note 1 :
: Denotes waterproof gaskets with a silicone rubber specification
9
JR-W Series●Waterproof Circular Connectors
Crimp contacts
Contact diameter Ø1.0mm
Male contact
Type
Part No.
HRS No.
B
C
Applicable wire
A-A
Loose
contacts
JRC-PC2-112
JRC-PC2-122
JRC-PC2-212
JRC-PC2-222
114-0243-3
114-0244-6
114-0245-9
114-0246-1
1.6
1.45
1.6
2.0
1.5
2.0
1.5
20 to 24 AWG
24 to 28 AWG
20 to 24 AWG
24 to 28 AWG
B
A
A
Reel contacts
19.3
1.45
Female contact
Type
Part No.
HRS No.
B
C
Applicable wire
A-A
B
Loose
contacts
JRC-SC2-112
JRC-SC2-122
JRC-SC2-212
JRC-SC2-222
114-0247-4
114-0248-7
114-0249-0
114-0250-9
1.6
1.45
1.6
2.0
1.5
2.0
1.5
20 to 24 AWG
24 to 28 AWG
20 to 24 AWG
24 to 28 AWG
A
A
Reel contacts
17
1.45
Note : Loose contacts come in packages of 100 pcs.
Reel contacts come in reels of 8,000 pcs.
Contact diameter Ø1.6mm
Male contact
Type
Part No.
HRS No.
B
C
Applicable wire
16 to 20 AWG
A-A
B
Loose
contacts
A
A
JRC-PC-112
114-0239-6
2.3
2.9
23.7
Reel contacts JRC-PC-212
114-0240-5
Female contact
Type
Part No.
HRS No.
B
C
Applicable wire
16 to 20 AWG
A-A
B
Loose
contacts
A
JRC-SC-112
114-0241-8
2.3
2.9
A
Reel contacts JRC-SC-212
114-0242-0
24
Note : Loose contacts come in packages of 100 pcs.
Reel contacts come in reels of 5,000 pcs.
Tools
Contact dia.
Type
Item
Part No.
HRS No.
Applicable contact
Applicable wire
20 to 24 AWG
JRC-PC2-112
JRC-SC2-112
HT802 / RM-11
150-0401-6
Manual Manual crimping tool
JRC-PC2-122
JRC-SC2-122
HT802 / RM-12
CM-105C
150-0402-9
901-0001-0
901-2037-1
24 to 28 AWG
–––––
Automatic crimping
machine body
–––––
Ø1
JRC-PC2-212
JRC-SC2-212
AP105-JRC2-1
20 to 24 AWG
Automatic
Applicator
JRC-PC2-222
JRC-SC2-222
AP105-JRC2-2
RM-TP
901-2038-4
150-0008-7
150-0033-4
24 to 28 AWG
–––––
Extractor
–––––
JRC-PC-112
JRC-SC-112
JRC-TC-11
16 AWG
Manual Manual crimping tool
Automatic crimping
JRC-PC-112
JRC-SC-112
JRC-TC-12
CM-105C
150-0034-7
901-0001-0
18 to 20 AWG
–––––
Ø1.6
–––––
machine body
Automatic
JRC-PC-212
JRC-SC-212
Applicator
Extractor
AP105-JRC-1
JRC-TP
901-2039-7
150-0035-0
16 to 20 AWG
–––––
–––––
10
JR-W Series●Waterproof Circular Connectors
Plug assemblies procedure
The receptacle side is omitted because no special procedures are required.
Diagrammatical view
Contact
Body shell
Clamp
Gasket
Washer
Coupling
C
Cable
P shell unit
Clamp piece
Spanner fitting
part
Cord
tightening
screw
Set screw
Conductor
Insulator
A
Cable jacket
B
Table 1 (Solder type)
[unit : mm]
C
Work procedure
Shell size
13
A
B
1.Disassembly of connector
(1)To remove the plug, remove the set screw, fit a receptacle adaptive to the P
shell unit to fix, and remove he cord tube.
(2)To remove the cord clamp, remove the cord tightening screws. (Note 1)
(3)
(3)
(3)
(3)
(12)
(14)
(17)
(20)
37 MAX.
39 MAX.
42 MAX.
45 MAX.
16
21
2.Connection
2.1 Soldering type
25
(1)Use the cable so that the conductor can be soldered properly into the solder
pot with the cable sheath diameter adaptive to each cord clamp.
(2)After the terminal treatment of the cable with a size given in Table 1, thread
on the cable the clamp, washer, gasket, cord tube and coupling in this order
and direction as shown above.
(3)Solder to connect the conductors to the terminals of the P shell unit.
Shrinkable tube is recommended to be used at the connecting part because
insulating performance might deteriorate due to solder whiskers or dewing.
After connecting, adjust to meet the C size. (Note 2)
Table 2 (Crimp type)
[unit : mm]
B C
No. of
contacts
Shell size
16
A
39
MAX.
42
3.5 to 4 (19)
4 to 4.5 (22)
10
21
MAX.
2.2 For crimping type connectors
(1)Please make sure to use a cable with the correct outer diameter for the cord
clamp. It is also important that the wire and its outer diameter are appropriate
for the crimp contacts.
(2)Pass the cables in order through the 1) tightening fitting, 2) washer, 3)
gasket, 4) cord tube, and 5) coupling in the direction shown on the above
figure, following terminal treatment as shown in Table-2.
(3)After crimping the applicable crimping contacts onto the conductor, insert the
crimping contacts into the contact holes of the P-shell unit. After inserting,
please make adjustments so that the dimension for Section C shall be
satisfied. Note 2 )
Table 3
[unit : N·m]
Shell size
Tightning torque
2 to 2.5
13
16
21
25
3 to 3.5
4 to 4.5
5 to 5.5
3.Assembly of connector
(1)Fit the connected P shell unit to the receptacle fixed with a vice or the like.
Torque the cord tube to the level as given in Table-3.
(2)Fit the gasket, washer and clamp. Torque the clamp to the level as given in
Table-3 while preventing the cable from being ratated. And, Loctite Japan Co
Ltd. is recommended to be applied as locking. (Note 3)
(3)Torque the set screw to 0.2 to 0.25N·m.
(4)Torque the cord tightening screw (two positions) to 0.65 to 0.7N·m.(Note 1, 3)
Note 1 : Not required if a simple type cord clamp is used.
Note 2 : Please maintain this dimension until assembly is complete.
Note 3 : Cable clamping force, cable rotation force, and others aspects may differ depending on the cable construction.
We recommend that you verify the suitability of the cable assembly before use or production.
11
JR-W Series●Waterproof Circular Connectors
Contact position arrangement
13
16
Shell size
13, 16
No. of contacts
Withstand voltage
Current capacity
3
5
7
10
5A
1,000V AC for 1 minute
10A
5A
10A
Insulation resistance
Contact resistance
Solderpot inner diameter
1,000Mø MIN.
5mø MAX.
1.1mm dia.
5mø MAX.
1.1mm dia.
1.7mm dia.
1.7mm dia.
21
Shell size
21
No. of contacts
Withstand voltage
Current capacity
10
16
1,000V AC for 1 minute
10A 5A
Insulation resistance
Contact resistance
Solderpot inner diameter
1,000Mø MIN.
5mø MAX.
1.7mm dia.
1.1mm dia.
25
Shell size
25
No. of contacts
Withstand voltage
Current capacity
4
16
24
3,000V AC for 1 minute
30A
1,000V AC for 1 minute
10A 5A
Insulation resistance
Contact resistance
Solderpot inner diameter
10,000Mø MIN.
1,000Mø MIN.
5mø MAX.
5mø MAX.
1.1mm dia.
3.4mm dia.
1.7mm dia.
Remarks 1. Figures are views of contact arrays of the mating end of male connectors.
2. The withstand voltage indicates the test voltage value.
12
JR-W Series●Waterproof Circular Connectors
Precautions
1. Switch off the power of the circuit before disconnecting or plugging-in the connectors.
2. Use connectors with socket contacts at the power side of the circuit.
3. Make sure that the coupling is in completely cocked position.
4. Use the connector as the combination of water-proof types.
5. This product series uses silver plated contacts. Silver reacts easily to exposure to sulfur gas so the below conditions may
cause tarnishing.
ꢀ・Dusty environments
ꢀ・Area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas
and so on.
Example; In close proximity to factory exhaust, automotive emissions, etc.
ꢀ・Close to heaters, or in other areas marked by extreme temperature differences or high humidity.
ꢀ・Close to rubber products includes rubber adhesives.
The Electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins.
Storage
Packing state; Packed in original packing or equivalent container
Temperature -10 to +60°C
Humidity
85% Max
(It is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any
temperature fluctuation)
Please use this products within 6 months of delivery.
(After 6 month, please check the solderbility before use)
“Storage” means long-term storage of the unused products in sealed packaging, prior to assembly to PCB.
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 08/2018. Contents are subject to change without notice for the purpose of improvements.
13
相关型号:
©2020 ICPDF网 联系我们和版权申明