HR31-5.08RA-5PDL(02) [HRS]
Rectangular Power Connector, 5 Contact(s), Male, Solder Terminal, Receptacle;型号: | HR31-5.08RA-5PDL(02) |
厂家: | HRS |
描述: | Rectangular Power Connector, 5 Contact(s), Male, Solder Terminal, Receptacle PC 连接器 |
文件: | 总7页 (文件大小:259K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Interface Connectors for Factory Automation Network
HR31 Series
Complies with Device Net requirements
Comparison of plug heights (actual size)
ꢀHirose HR31
ꢀOther manufacturer’s product
ꢀꢀFeatures
1. Device-Net Compliant
Conforms to requirements of Factory Automation Network Device-Net standards.
Hirose products are distinct from products of made others, as described below.
Feature
Made by others
Hirose HR31
Reduced number of termination Crimped to commercially available cap connectors, Crimped and connected to terminal then fastened
operations
inserted into housing and fastened by screw.
simply by inserting into housing.
Plug height is 10.2 mm, allowing use of less space
when mounting several connectors
High density mounting
Plug height : 15 mm
Prevention of connection errors
Contact positions not identified.
Permanently identified contact positions
Number of required operations to
secure receptacle assembly to the
board
Connectors are attached by screws from the No need for screws, built-in locking pin secures
opposite side.
connector to the board
2 Locking features
Total space occupied by mated assemblies
The connectors can be supplied with either of the following
locking features:
-Screw lock, using attached screws.
-Snap lock, using built-in feature with a definite click-sensation.
With screw lock
Without screw lock
3. Commercially available tools may be used
Use crimp tools conforming to JIS C 9711 standards.
Terminated contacts can be removed using 1 mm dia.
steel pin. and re-inserted.
12
20
12
20
4. Prevention of deformation of the contacts
When fully inserted, the plug contacts are fully protected by
the walls of the insulator body eliminating a risk of
accidental damage.
ꢀꢀApplications
Power units and communications units of factory automation
related devices
2006.8
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀꢀProduct Specifications
12A (2.5mm2 wire)
10A (1.5mm2 wire)
250V AC, 350V DC
Operating temperature range
Storage temperature range
-40ç to +100ç
to
Current rating
Voltage rating
Rating
-40ç +85ç (Note 2)
Item
Specification
Conditions
1.Contact resistance
2.Insulation resistance
3.Withstanding voltage
4.Impulse withstanding voltage
5 m ohms max.
1A DC
1000 M ohms min.
500 V DC
No flashover or insulation breakdown
No flashover or insulation breakdown
2000V AC/one minute
Standard waveform of 4KV, positive/negative, 3 times each
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 5 min.
in each of the 3 directions, 10 cycles each
5.Vibration
No electrical discontinuity of 10 µs or more
6.Durability
Contact resistance: 10 m ohms max.
1000 cycles
(insertion/ withdrawal)
Temperature: -40ç / Room temperature to +100ç / Room temperature
Time: 30 / 10 to 15 / 30 / 10 to 15 (Minutes)
5 cycles
Insulation resistance: 1000 M ohms min.
7.Temperature cycle
8.Humidity
Insulation resistance:
10 M ohms min. (Humidity state)
100 M ohms min. (Dry state)
96 hours at temperature of 40ç and humidity of 90% to 95%
ꢀꢀMaterials
Part
Material
Finish
Color: Black or Green
Nickel plating
Remarks
Insulator
PBT
UL94V-0
UL94V-0
Plug
Screw
Steel
Contact area: phosphor bronze Contact area: gold plating
Termination area: copper
Crimp contact
Socket contact
Termination area: tin plating
Insulator
PBT
Color: Black or Green
Contact area: gold plating
Termination are: gold plating
Male contact
Brass
Receptacle
Nut
Steel
Nickel plating
Tin plating
Board retention pin
Phosphor bronze
ꢀꢀ
Ordering information
ꢀConnector
( )
HR31 - 5.08 P A - 5 S C 01
1
2
3
4
5
6
7
8
1
2
3
6
Contact type
Series name
Contact pitch
Connector type
HR31
5.08mm
P: Plug
S: Female contact
P: Male contact
R: Receptacle
7
Terminal type
C: Crimping
4
5
Screw lock type
No. of contacts
Blank: With screw
A: Without screw
DL: Right angle through hole type
D: Straight through hole type
5
Color, plating, board retention pin type
8
ꢀCrimp contact
( )
HR31 - SC - 1 1 1 01
9
10
11
12
13
14
Plating type
9
10
11
12
13
Series name
Contact type
Contact packaging type 1: loose contact
HR31
SC: female contact
1: Gold plating
Suffix
14
Conductor cross area
1: 1.04 to 2.63mm2
2: 0.25 to 1.65mm2
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀꢀPlug (with screw lock)
27
2 1 3
4 5
25.4
35.5
Part No.
CL No.
Weight
8g
Color
Black
Green
RoHS
YES
HR31-5.08P-5SC(71)
131-0002-2-71
131-0002-2-72
HR31-5.08P-5SC(72)
Plug (without screw lock)
27
5
4
3
1
2
25.4
HR31-5.08PA-5SC
Part No.
CL No.
Weight
6g
Color
Black
Green
RoHS
YES
HR31-5.08PA-5SC
HR31-5.08PA-5SC(01)
131-0009-1
131-0009-1-01
ꢀꢀCrimp contact
B
B
B - B
23
Part No.
CL No.
Weight
1g
Contact plating Applicable conductor cross area (Note 2)
RoHS
YES
ØA
4
2
HR31-SC-111(71)
HR31-SC-121(71)
131-0004-8-71
131-0005-0-71
1.04 to 2.63mm
Gold
2
3.3
0.2 to 1.65mm
Note 1: Bag packaging (100 pieces/bag)
Note 2: For a multi-strand conductors
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀꢀReceptacle (Right angle through hole type with screw lock)
Contact plating
35.5
12
1
2
3
4
5
7.5
10
HR31-5.08R-5PDL
Part No.
CL No.
Weight
4g
Color
Black
Contact plating
Gold
Board retention pin
RoHS
YES
With
Without
With
HR31-5.08R-5PDL(72)
HR31-5.08R-5PDL(74)
HR31-5.08R-5PDL(75)
HR31-5.08R-5PDL(76)
131-0001-0-72
131-0001-0-74
131-0001-0-75
131-0001-0-76
Green
Without
Receptacle (Right angle through hole type without screw lock)
Contact plating
27.4
12
1
2
3
4
5
10
10.25
HR31-5.08RA-5PDL
Part No.
CL No.
Weight
2g
Color
Black
Contact plating
Gold
Board retention pin
With
RoHS
YES
HR31-5.08RA-5PDL(72)
HR31-5.08RA-5PDL(74)
HR31-5.08RA-5PDL(75)
HR31-5.08RA-5PDL(76)
131-0008-9-72
131-0008-9-74
131-0008-9-75
131-0008-9-76
Without
With
Green
Without
BPCB mounting pattern
ꢀ With screw lock
ꢀ Without screw lock
5.08 0.05
5.08 0.05
5.08 0.05
5.08 0.05
10.16 0.05
10.16 0.05
10.16 0.05
10.16 0.05
15.24 0.05 15.24 0.05
12.6 0.05 12.6 0.05
Connector mounting side
Connector mounting side
(Board thickness =1.6)
(Board thickness =1.6)
Note: Dia. 2.3 through hole is not required on the board when using connectors without the retention pin.
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀꢀReceptacle (Straight through hole type with screw lock)
35.5
1
2
3
4
5
3
12
4.3
Connector mounting side B
HR31-5.08R-5PD
Part No.
CL No.
Weight
4g
Color
Contact plating
Gold
Board retention pin
With
RoHS
YES
HR31-5.08R-5PD(72)
HR31-5.08R-5PD(74)
HR31-5.08R-5PD(75)
HR31-5.08R-5PD(76)
131-0003-5-72
131-0003-5-74
131-0003-5-75
131-0003-5-76
Black
Without
With
Green
Without
Receptacle (Straight through hole type without screw lock)
27.4
1
2
3
4
5
3
Connector mounting side B
12
4.3
HR31-5.08RA-5PD
Part No.
CL No.
Weight
2g
Color
Black
Contact plating
Board retention pin
With
RoHS
YES
HR31-5.08RA-5PD(72)
HR31-5.08RA-5PD(74)
HR31-5.08RA-5PD(75)
HR31-5.08RA-5PD(76)
131-0016-7-72
131-0016-7-74
131-0016-7-75
131-0016-7-76
Without
Gold
With
Green
Without
BPCB mounting pattern
ꢀ With screw lock
ꢀ Without screw lock
5.08 0.05
5.08 0.05
5.08 0.05
5.08 0.05
10.16 0.05
10.16 0.05
10.16 0.05
10.16 0.05
15.24 0.05 15.24 0.05
(Board thickness =1.6)
12.6 0.05 12.6 0.05
Connector mounting side B
Connector mounting side B
(Board thickness =1.6)
Note: Dia. 2.3 through hole is not required on the board when using connectors without the retention pin.
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀꢀTools
Type
Part No.
CL No.
Manual crimp tool
Contact removal pin
HR31-TC-01
HR31-SC-TP
150-0217-7
150-0215-1
Manual crimp tool
Contact removal pin
ꢀ Tools application procedures
1. Manual contact crimp tool
The tool will terminate all specified crimp contacts. Placement of correct contact in corresponding crimp position on
the tool is critical. The positions are clearly indicated on the tool as (2) and (1.25). The exposed conductor strip
length is 5mm.
Crimp position indicator
Applicable crimp contact
2
HR31-SC-113 or HR31-SC-111
HR31-SC-123 or HR31-SC-121
1.25
Crimp position indicator
2. Contact removal pin
Contact removal pin provides easy method of contact removal from plug assembly.
1) Fully insert the long end of the contact removal pin into the opening in the insulator.
2) Move the pin forward, in the direction of the mating face.
This will cause the terminated contact to move in opposite direction.
3) Pull out the wire with the attached crimped contact.
Molded-in lance
Molded-in lance
Wire
Wire
Pull-out
Insertion direction
Contact removal pin
Contact removal pin
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B Usage Precautions
1. To prevent damage, align receptacle with the panel and board in such a way that it is not subject to
excess loads.
1.1 Recommended mounting panel dimensions (right angle through hole type)
Panel
A
16.6 0.1
5 min.
Part No.
A
+0.2
36+0
HR31-5.08R-5PDL(**)
HR31-5.08RA-5PDL(**)
+0.2
0
3.2
+0.2
27.9 +0
+0.2
0
2
Board
1.2 Recommended mounting panel dimensions (straight through hole type)
Panel
5 min.
B
Part No.
B
+0.2
16.6 0.1
36+0
HR31-5.08R-5PD(**)
HR31-5.08RA-5PD(**)
3.2
2 +0.2
0
+0.2
27.9 +0
2. Insert the crimp contact into the plug in the direction shown below.
Crimp contact
Wire
3. Use a number 0 cross drive bit to tighten the screw lock’s screw.
4. Assure that the circuit’s power is off when mating and un-mating connectors.
7
相关型号:
HR31-5.08RA-5PDL(03)
Rectangular Power Connector, 5 Contact(s), Male, Solder Terminal, Receptacle
HRS
HR31-5.08RA-5PDL(71)
Rectangular Power Connector, 5 Contact(s), Male, Solder Terminal, Receptacle
HRS
HR31-5.08RA-5PDL(72)
Rectangular Power Connector, 5 Contact(s), Male, Solder Terminal, Receptacle
HRS
HR31-5.08RA-5PDL(73)
Rectangular Power Connector, 5 Contact(s), Male, Solder Terminal, Receptacle
HRS
HR31-5.08RA-5PDL(74)
Rectangular Power Connector, 5 Contact(s), Male, Solder Terminal, Receptacle
HRS
HR31-5.08RA-5PDL(75)
Rectangular Power Connector, 5 Contact(s), Male, Solder Terminal, Receptacle
HRS
HR31-5.08RA-5PDL(76)
Rectangular Power Connector, 5 Contact(s), Male, Solder Terminal, Receptacle
HRS
©2020 ICPDF网 联系我们和版权申明