HR31-5.08R-5PD(02) [HRS]
Rectangular Power Connector, 5 Contact(s), Male, Solder Terminal, Receptacle;型号: | HR31-5.08R-5PD(02) |
厂家: | HRS |
描述: | Rectangular Power Connector, 5 Contact(s), Male, Solder Terminal, Receptacle |
文件: | 总7页 (文件大小:345K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NEW
Interface Connectors for Factory Automation Network
HR31 Series
Complies with Device Net requirements
Comparison of plug heights (actual size)
●Hirose HR31
●Other manufacturer’s product
■ Features
1. Device-Net Compliant
Conforms to requirements of Factory Automation Network Device-Net standards.
Hirose products are distinct from products of made others, as described below.
Feature
Made by others
Hirose HR31
Reduced number of termination Crimped to commercially available cap connectors, Crimped and connected to terminal then fastened
operations
inserted into housing and fastened by screw.
simply by inserting into housing.
Plug height is 10.2 mm, allowing use of less space
when mounting several connectors
High density mounting
Plug height : 15 mm
Prevention of connection errors
Contact positions not identified.
Permanently identified contact positions
Number of required operations to
secure receptacle assembly to the
board
Connectors are attached by screws from the No need for screws, built-in locking pin secures
opposite side.
connector to the board
2 Locking features
Total space occupied by mated assemblies
The connectors can be supplied with either of the following
locking features:
-Screw lock, using attached screws.
-Snap lock, using built-in feature with a definite click-sensation.
With screw lock
Without screw lock
3. Commercially available tools may be used
Use crimp tools conforming to JIS C 9711 standards.
Terminated contacts can be removed using 1 mm dia.
steel pin. and re-inserted.
12
20
12
20
4. Prevention of deformation of the contacts
When fully inserted, the plug contacts are fully protected by
the walls of the insulator body eliminating a risk of
accidental damage.
■ Applications
Power units and communications units of factory automation
related devices
2002.9
1
■ Product Specifications
12A (2.5mm2 wire)
10A (1.5mm2 wire)
to
-40ç +100ç
Operating temperature range
Storage temperature range
Current rating
Rating
Voltage rating
250 V AC, 350V DC
-40ç +85ç (Note 2)
to
Item
Specification
Conditions
1A DC
1.Contact resistance
2.Insulation resistance
3.Withstanding voltage
4.Impulse withstanding voltage
5 m ohms max.
500 V DC
1000 M ohms min.
2000V AC applied/one minute
No flashover or insulation breakdown
No flashover or insulation breakdown
Standard waveform of 4KV, positive/negative, 3 times each
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 5 min.
in each of the 3 directions, 10 cycles each
5.Vibration
No electrical discontinuity of 10 µs or more
6.Durability
100 cycles
(1000 cycles for gold plated contacts)
Contact resistance: 10 m ohms max.
(insertion/ withdrawal)
Temperature: -40ç / Room temperature to +100ç / Room temperature
Time: 30 / 10 to 15 / 30 / 10 to 15 (Minutes) , 5 cycles
Insulation resistance: 1000 M ohms min.
7.Temperature cycle
8.Humidity
Insulation resistance:
10 M ohms min. (Humidity state)
100 M ohms min. (Dry state)
96 hours at temperature of 40ç and humidity of 90% to 95%
■ Materials
Remarks
Part
Material
Finish
Color: Black or Green
Zinc plating
Insulator
PBT
UL94V-0
Plug
Screw
Steel
Contact area: phosphor bronze Contact area: solder plating
Available with gold plating on
contact area
Crimp contact
Socket contact
Termination area: copper
Termination area: tin plating
Insulator
PBT
Color: Black or Green
UL94V-0
Contact area: solder plating
Termination are: solder plating
Available with gold plating on
contact area
Male contact
Brass
Receptacle
Nut
Steel
Zinc plating
Board retention pin
Phosphor bronze
Solder plating
■
Ordering information
●Connector
( )
HR31 - 5.08 P A - 5 S C 01
1
2
3
4
5
6
7
8
1
2
3
6
Contact type
Series name
Contact pitch
Connector type
HR31
5.08mm
P: Plug
S: Female contact
P: Male contact
R: Receptacle
7
8
Terminal type
C: Crimping
CL: Right angle through hole type
D: Straight through hole type
Color, plating, board retention pin type
4
5
Screw lock type
No. of contacts
Blank: With screw
A: Without screw
5
●Crimp contact
HR31 - SC - 1 1 3
9
10
11
12
13
Plating type
9
10
11
12
13
Series name
Contact type
Contact packaging type 1: loose contact
HR31
SC: female contact
3: Solder plating
1: Gold plating
Conductor cross area
1: 1.04 to 2.63mm2
2: 0.25 to 1.65mm2
2
■ Plug (with screw lock)
27
2 1 3
4 5
25.4
35.5
HR31-5.08P-5SC
CL No.
Color
Black
Green
Part No.
Weight
8g
HR31-5.08P-5SC
131-0002-2
131-0002-2-01
(
)
HR31-5.08P-5SC 01
Plug (without screw lock)
27
5
4
3
1
2
25.4
HR31-5.08PA-5SC
CL No.
Color
Black
Green
Part No.
Weight
6g
HR31-5.08PA-5SC
131-0009-1
131-0009-1-01
(
)
HR31-5.08PA-5SC 01
■ Crimp contact
B
B - B
23
B
Part No.
CL No.
Weight
Contact plating
Solder
Applicable conductor cross area (Note 2)
ØA
4
2
HR31-SC-113
HR31-SC-123
HR31-SC-111
HR31-SC-121
131-0006-3
131-0007-6
131-0004-8
131-0005-0
1.04 to 2.63mm
2
3.3
4
0.2 to 1.65mm
1g
2
1.04 to 2.63mm
Gold
2
3.3
0.2 to 1.65mm
Note 1: Bag packaging (100 pieces/bag)
Note 2: For a multi-strand conductors
3
■ Receptacle (Right angle through hole type with screw lock)
Contact plating
35.5
12
1
2
3
4
5
7.5
10
HR31-5.08R-5PDL
Part No.
HR31-5.08R-5PDL
CL No.
Weight
4g
Color
Black
Contact plating
Solder
Board retention pin
With
131-0001-0
(
)
)
)
)
)
HR31-5.08R-5PDL 01
131-0001-0-01
131-0001-0-02
131-0001-0-03
131-0001-0-04
131-0001-0-05
Gold
(
HR31-5.08R-5PDL 02
Solder
Without
(
HR31-5.08R-5PDL 03
(
HR31-5.08R-5PDL 04
Gold
With
Green
(
HR31-5.08R-5PDL 05
Without
Receptacle (Right angle through hole type without screw lock)
Contact plating
27.4
12
1
2
3
4
5
10
10.25
HR31-5.08RA-5PDL
Part No.
CL No.
Weight
2g
Color
Black
Contact plating
Solder
Board retention pin
With
HR31-5.08RA-5PDL
131-0008-9
(
)
)
)
)
)
HR31-5.08RA-5PDL 01
131-0008-9-01
131-0008-9-02
131-0008-9-03
131-0008-9-04
131-0008-9-05
Gold
(
HR31-5.08RA-5PDL 02
Solder
Without
(
HR31-5.08RA-5PDL 03
(
HR31-5.08RA-5PDL 04
Gold
With
Green
(
HR31-5.08RA-5PDL 05
Without
BPCB mounting pattern
● With screw lock
● Without screw lock
5.08±0.05
5.08±0.05
5.08±0.05
5.08±0.05
10.16±0.05
10.16±0.05
10.16±0.05
10.16±0.05
15.24±0.05 15.24±0.05
12.6±0.05 12.6±0.05
Connector mounting side
Connector mounting side
(Board thickness =1.6)
(Board thickness =1.6)
Note: Dia. 2.3 through hole is not required on the board when using connectors without the retention pin.
4
■ Receptacle (Straight through hole type with screw lock)
35.5
1
2
3
4
5
3
12
4.3
Connector mounting side B
HR31-5.08R-5PD
Part No.
HR31-5.08R-5PD
CL No.
Weight
4g
Color
Contact plating
Solder
Board retention pin
With
131-0003-5
(
)
)
)
)
)
HR31-5.08R-5PD 01
131-0003-5-01
131-0003-5-02
131-0003-5-03
131-0003-5-04
131-0003-5-05
Gold
Black
(
HR31-5.08R-5PD 02
Solder
Without
(
HR31-5.08R-5PD 03
(
HR31-5.08R-5PD 04
Gold
With
Green
(
HR31-5.08R-5PD 05
Without
Receptacle (Straight through hole type without screw lock)
27.4
1
2
3
4
5
3
Connector mounting side B
12
4.3
HR31-5.08RA-5PD
Part No.
HR31-5.08RA-5PD
CL No.
Weight
Color
Black
Contact plating
Solder
Board retention pin
With
131-0016-7
(
)
)
)
)
)
HR31-5.08RA-5PD 01
131-0016-7-01
131-0016-7-02
131-0016-7-03
131-0016-7-04
131-0016-7-05
Gold
(
HR31-5.08RA-5PD 02
Solder
2g
Without
(
HR31-5.08RA-5PD 03
(
HR31-5.08RA-5PD 04
Gold
With
Green
(
HR31-5.08RA-5PD 05
Without
BPCB mounting pattern
● With screw lock
● Without screw lock
5.08±0.05
5.08±0.05
5.08±0.05
5.08±0.05
10.16±0.05
10.16±0.05
10.16±0.05
10.16±0.05
15.24±0.05 15.24±0.05
(Board thickness =1.6)
12.6±0.05 12.6±0.05
Connector mounting side B
Connector mounting side B
(Board thickness =1.6)
Note: Dia. 2.3 through hole is not required on the board when using connectors without the retention pin.
5
■ Tools
Type
Part No.
CL No.
Manual crimp tool
Contact removal pin
HR31-TC-01
HR31-SC-TP
150-0217-7
150-0215-1
Manual crimp tool
Contact removal pin
● Tools application procedures
1. Manual contact crimp tool
The tool will terminate all specified crimp contacts. Placement of correct contact in corresponding crimp position on
the tool is critical. The positions are clearly indicated on the tool as (2) and (1.25). The exposed conductor strip
length is 5mm.
Crimp position indicator
Applicable crimp contact
HR31-SC-113 or HR31-SC-111
HR31-SC-123 or HR31-SC-121
2
1.25
Crimp position indicator
2. Contact removal pin
Contact removal pin provides easy method of contact removal from plug assembly.
1) Fully insert the long end of the contact removal pin into the opening in the insulator.
2) Move the pin forward, in the direction of the mating face.
This will cause the terminated contact to move in opposite direction.
3) Pull out the wire with the attached crimped contact.
Molded-in lance
Molded-in lance
Wire
Wire
Pull-out
Insertion direction
Contact removal pin
Contact removal pin
6
B Usage Precautions
1. To prevent damage, align receptacle with the panel and board in such a way that it is not subject to
excess loads.
1.1 Recommended mounting panel dimensions (right angle through hole type)
Panel
A
16.6±0.1
Part No.
A
5 min.
+0.2
HR31-5.08R-5PDL
HR31-5.08RA-5PDL
36+0
+0.2
0
3.2
+0.2
27.9 +0
+0.2
0
2
Board
1.2 Recommended mounting panel dimensions (straight through hole type)
Panel
5 min.
B
Part No.
B
+0.2
16.6±0.1
HR31-5.08R-5PD
HR31-5.08RA-5PD
36+0
3.2
2 +0.2
+0.2
0
27.9 +0
2. Insert the crimp contact into the plug in the direction shown below.
Crimp contact
Wire
3. Use a number 0 cross drive bit to tighten the screw lock’s screw.
4. Assure that the circuit’s power is off when mating and un-mating connectors.
7
相关型号:
HR31-5.08R-5PD(04)
Board Connector, 5 Contact(s), 1 Row(s), Male, Straight, 0.2 inch Pitch, Solder Terminal, Locking, Green Insulator, Receptacle
HRS
HR31-5.08R-5PDL(02)
Rectangular Power Connector, 5 Contact(s), Male, Solder Terminal, Receptacle
HRS
HR31-5.08R-5PDL(03)
Rectangular Power Connector, 5 Contact(s), Male, Solder Terminal, Receptacle
HRS
HR31-5.08R-5PDL(04)
Rectangular Power Connector, 5 Contact(s), Male, Solder Terminal, Receptacle
HRS
HR31-5.08R-5PDL(05)
Rectangular Power Connector, 5 Contact(s), Male, Solder Terminal, Receptacle
HRS
HR31-5.08R-5PDL(71)
Rectangular Power Connector, 5 Contact(s), Male, Solder Terminal, Receptacle
HRS
HR31-5.08R-5PDL(74)
Rectangular Power Connector, 5 Contact(s), Male, Solder Terminal, Receptacle
HRS
©2020 ICPDF网 联系我们和版权申明