HR25-7TR-4SA [HRS]
High Performance, Microminiature Circular Connectors;型号: | HR25-7TR-4SA |
厂家: | HRS |
描述: | High Performance, Microminiature Circular Connectors |
文件: | 总8页 (文件大小:948K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
High Performance, Microminiature Circular Connectors
HR25 Series
Mated dimensions
43.8
35.8
Diagrams of Connectors in Combination
Solder type receptacle (HR25-*TR-**)
Solder type plug (HR25-*TP-**)
Crimp type receptacle (HR25-9TR-**C)
Crimp type plug (HR25-9TP-**C)
Direct PCB mounting type receptacle (HR25-*TR-**A)
Solder type jack (HR25-*TJ-**)
Crimp type jack (HR25-9TJ-**C)
Features
1. Small, high density design
Maximum plug outer diameter : 4, 6, 8 contacts : Ø10.5
12, 16, 20 contacts : Ø12.5
Designed with Hirose technology to be small, compact connectors with a low profile.
2. Wide range of product variations
Number of contacts: 4, 6, 8, 12, 16, 20
Connector styles : Plug, jack, receptacle
Termination style
Contact gender
: Solder, crimp (Additionally, a direct PCB mounting style is also available for receptacles.)
: Plug, receptacle, and jack connectors are available configured either way with male
or female contacts.
3. Shielded design
The connector’s metal shell design is an optimal choice for devices that require EMI shielding.
4. RoHS compliant
All materials and substances used to produce this product comply with RoHS standards.
In cases where the application will demand a high level of reliability, such as automotive,
please contact a company representative for further information.
1
2015.1w
HR25 Series●High Performance, Microminiature Circular Connectors
Product Specifications
Operating
temperature range
Storage temperature
range
Rated current
1A
-25ç to +85ç
-10ç to +60ç
Ratings
Rated voltage
30V AC, 42V DC
Items
Specifications
Conditions
1.Contact resistance 30 mø min.
Measured at DC 1A
Measured at DC 100 V
AC 100 V for one minute
2.Insulation
1,000 Mø min.
resistance
3.Withstanding
Voltage
No flashover or dielectric breakdown.
4.Vibration
resistance
No electrical discontinuity for 10 µs or
greater.
10 to 55 Hz/cycle, amplitude: 0.75 mm, 3 axis directions,
2 hours each direction
No electrical discontinuity for 10 µs or
greater.
Acceleration: 490 ms2, duration: 11 ms, 3 axis directions,
3 cycles each direction.
5.Shock resistance
6.Mating Cycles
Contact resistance: 50 mø max.
1,000 times
-55ç: 30 minutes Normal temperature: 10 to 15 minutes
➝
7.Temperature cycle Insulation resistance: 1,000 Mø min.
85ç: 30 minutes Normal temperature: 10 to
➝
➝
15minutes, left for 5 cycles
Insulation resistance:
8.Moisture
Temperature: 40ç, relative humidity: 90 to 95%,
left for 96 hours
5 Mø min. (at high humidity)
resistance
50 Mø min (when dry)
Material
Item
Material
Finish
Remarks
――――
UL94V-0
Plated shell
Insulator
Zinc alloy
PPS resin
Nickel plated
――――
Plug/jack
Ethylene-propylene
rubber
Gasket, boot
――――
――――
Contact
Plated shell
Insulator
Contact
Phosphor bronze
Zinc ally
Gold plated
Nickel plated
――――
――――
――――
UL94V-0
――――
PPS resin
Receptacle
Phosphor bronze
Gold plated
Ethylene-propylene
rubber
Gasket
――――
――――
Product Number Structure
HR25 9 T P 20 P C (**)
-
-
❶
❷ ❸ ❹
❺
❻
❼
❽
❶Model name:HR25 Series
❷Shell size:The shell size is the outer diameter of the mating end of the plug.
❸Locking mechanism
T:Screw-lock
❹Connector type
P:Plug
R:Receptacle
J:Jack
❺Number of contacts
❻Contact type:
S:Female contact
P:Male contact
❼Contact termination method:
None:Solder termination
C:Crimp termination
A:PCB dip termination
❽Other specifications: A two-digit number is added to indicate other specifications than ❶ to ❼ shown above.
2
HR25 Series●High Performance, Microminiature Circular Connectors
Plug
A
● Solder type
Unit: mm
Part No.
HRS No.
No. of contacts
4
A
B
C
D
Ø
Weight
Ø
Ø
HR25-7TP-4P(72)
HR25-7TP-4S(72)
HR25-7TP-6P(72)
HR25-7TP-6S(72)
HR25-7TP-8P(72)
HR25-7TP-8S(72)
HR25-9TP-12P(72)
HR25-9TP-12S(72)
HR25-9TP-16P(74)
HR25-9TP-16S(73)
HR25-9TP-20P(72)
HR25-9TP-20S(73)
125-0001-8 72
125-0002-0 72
125-0003-3 72
125-0004-6 72
125-0005-9 72
125-0006-1 72
125-0101-2 72
125-0102-5 72
125-0103-8 74
125-0104-0 73
125-0105-3 72
125-0106-6 73
6
35
10.5
6.7
5
8g
8
12
16
20
43
12.5
8.7
7
13g
● Crimp type
Unit: mm
Weight
Part No.
HRS No.
No. of contacts
12
A
B
C
D
Ø
Ø
Ø
HR25-9TP-12PC(72)
HR25-9TP-12SC(72)
HR25-9TP-16PC(72)
HR25-9TP-16SC(72)
HR25-9TP-20PC(72)
HR25-9TP-20SC(72)
125-0401-6 72
125-0402-9 72
125-0403-1 72
125-0404-4 72
125-0405-7 72
125-0406-0 72
16
20
43
12.5
8.7
7
12g
Receptacle
13.5
11.5
5.8
C
B
D(HEX)
● Solder type
Unit: mm
Weight
Part No.
HRS No.
No. of contacts
A
Ø
B
C
D
HR25-7TR-4S(73)
HR25-7TR-4P(73)
HR25-7TR-6S(73)
HR25-7TR-6P(73)
HR25-7TR-8S(73)
HR25-7TR-8P(73)
HR25-9TR-12S(71)
HR25-9TR-12P(71)
HR25-9TR-16S(71)
HR25-9TR-16P(71)
HR25-9TR-20S(71)
HR25-9TR-20P(71)
125-0007-4 73
125-0008-7 73
125-0009-0 73
125-0010-9 73
125-0011-1 73
125-0012-4 73
125-0107-9 71
125-0108-1 71
125-0109-4 71
125-0110-3 71
125-0111-6 71
125-0112-9 71
4
6
10.6
M8.5×0.5
M8×0.5
10
12
3g
4g
8
12
16
20
12.6
M10.5×0.5
M10×0.75
A
● Crimp type
Unit: mm
5.8
Part No.
HRS No.
No. of contacts
12
A
11.5
13
11.5
13
11.5
13
Weight
HR25-9TR-12SC(71)
HR25-9TR-12PC(71)
HR25-9TR-16SC(71)
HR25-9TR-16PC(71)
HR25-9TR-20SC(71)
HR25-9TR-20PC(71)
125-0407-2 71
125-0408-5 71
125-0409-8 71
125-0410-7 71
125-0411-0 71
125-0412-2 71
16
20
3g
M10×0.75
12(HEX)
M10×0.5
3
HR25 Series●High Performance, Microminiature Circular Connectors
14.1
11.5
Receptacle
2(Dip length)
5.8
C
B
D(HEX)
● Direct PCB mounting type
Unit: mm
Weight
Part No.
HRS No.
No. of contacts
4
A
B
C
D
Ø
HR25-7TR-4SA(73)
HR25-7TR-4PA(73)
HR25-7TR-6SA(73)
HR25-7TR-6PA(73)
HR25-7TR-8SA(73)
HR25-7TR-8PA(73)
HR25-9TR-12SA(71)
HR25-9TR-12PA(71)
HR25-9TR-16SA(71)
HR25-9TR-16PA(71)
HR25-9TR-20SA(71)
HR25-9TR-20PA(71)
125-0019-3 73
125-0020-2 73
125-0021-5 73
125-0022-8 73
125-0023-0 73
125-0024-3 73
125-0119-8 71
125-0120-7 71
125-0121-0 71
125-0122-2 71
125-0123-5 71
125-0124-8 71
6
10.6
12.6
M8.5×0.5
M8×0.5
10
3g
4g
8
12
16
20
M10.5×0.5
M10×0.75
12
Jack
B
D
● Solder type
Unit: mm
Weight
Part No.
HRS No.
No. of contacts
4
A
B
C
Ø
D
Ø
HR25-7TJ-4S(72)
HR25-7TJ-4P(72)
HR25-7TJ-6S(72)
HR25-7TJ-6P(72)
HR25-7TJ-8S(72)
HR25-7TJ-8P(72)
HR25-9TJ-12S(72)
HR25-9TJ-12P(72)
HR25-9TJ-16S(72)
HR25-9TJ-16P(72)
HR25-9TJ-20S(73)
HR25-9TJ-20P(72)
125-0013-7 72
125-0014-0 72
125-0015-2 72
125-0016-5 72
125-0017-8 72
125-0018-0 72
125-0113-1 72
125-0114-4 72
125-0115-7 72
125-0116-0 72
125-0117-2 73
125-0118-5 72
6
10.6
35
5
M8.5×0.5
8g
8
12
16
20
12.6
43
7
M10.5×0.5
12g
● Crimp type
Unit: mm
Weight
Part No.
HRS No.
No. of contacts
12
A
B
C
Ø
D
Ø
HR25-9TJ-12SC(72)
HR25-9TJ-12PC(72)
HR25-9TJ-16SC(72)
HR25-9TJ-16PC(72)
HR25-9TJ-20SC(72)
HR25-9TJ-20PC(72)
125-0413-5 72
125-0414-8 72
125-0415-0 72
125-0416-3 72
125-0417-6 72
125-0418-9 72
16
20
12.6
43
7
M10.5×0.5
12g
4
HR25 Series●High Performance, Microminiature Circular Connectors
Crimp-style contacts
● Male Contacts
● Female Contacts
13.4
9.4
13.4
4
9.4
4
Type
Part No.
HRS No.
Suitable Wire
Type
Part No.
HRS No. Suitable Wire
Loose
contacts
Reel
Loose
contacts
Reel
HR25-PC-111
125-0419-1
HR25-SC-111
HR25-SC-211
125-0421-3
AWG#30
125-0422-6
AWG#30
HR25-PC-211
125-0420-0
contacts
contacts
Note: 1. Please use wire with a outer jacket diameter of 0.71mm
or less.
Note: 1. Please use wire with a outer jacket diameter of 0.71mm
or less.
2. Loose contacts come in packages of 100 pcs.
Reel contacts come in reels of 10,000 pcs.
2. Loose contacts come in packages of 100 pcs.
Reel contacts come in reels of 10,000 pcs.
Applicable Tools
Applicable Wire and
Type
Item
Part No.
HRS No.
Applicable Contacts
Applicable Cable
Diameter
HR25-PC-111
HR25-SC-111
Manual Manual crimping tool
Auto crimping
machine body
Auto
HR25-TA3032HC
CM-105
150-0207-3
901-0005-4
901-2040-6
AWG#30
−
−
HR25-PC-211
HR25-SC-211
Applicator
AP105-HR25-1
AWG#30
Cable crimping tool
Extractor
HR10A-TC-02
HR25-TP
150-0041-2
150-0091-0
−
−
5
7
Ø 、Ø
−
Assembly Tools
Use of the following assembly tools will simplify the process of disassembling and assembling the connectors for the cable
assembly.
Part No.
HRS No.
Suitable Connectors and Uses
HR25-7TP-T01
HR25-9TP-T01
HR25-7TJ-T01
HR25-9TJ-T01
150-0082-0
150-0080-4
150-0089-9
150-0090-8
For HR25-7TP wiring and P shell unit tightening
For HR25-9TP wiring and P shell unit tightening
For HR25-7TJ wiring and J shell unit tightening
For HR25-9TJ wiring and J shell unit tightening
5
HR25 Series●High Performance, Microminiature Circular Connectors
Cable Assembly Procedures
The outline of wiring work for this diagram uses the soldered type as an example.
The jack side is also based on the work outline of the plug: however, the receptacle side does not require a special work
outline and has been omitted because of this.
● Construction Diagram
P shell unit
Spanner position
Clamp body
Cable
Clamp fitting
2 or less
Solder type approx. 1.5
Crimp type 1.7± ±.2
Boss
Cable bushing
A
Set screw
(Opposite sides 1.27)
Table 1
Shell size
Soldered type A
dimensions
Crimp type A
dimensions
Spanner spacing
Tightening torque
7
9
10mm
19mm
−
8mm
1N
1N
m
m
・
・
15mm
10mm
Work Operation Procedures
1. With regard to cables, the wire to be used should have a conductor with a nominal cross-sectional area of 0.08 mm2
(AWG#28) or less in a finished form suited to each size.
2. First pass the cable bushing and the plug body in order over the cable, then cut the end at the dimensions indicated in the
above diagram.
3. Mount the P shell unit in the wiring jig and perform the solder wiring.
4. Use the cable crimping jig (HR10A-TC-02) to fix the clamp fitting to the cable.
5. After performing the wiring, tighten the plug body to the screw portion of the P shell unit using the specified torque (in the
above table).
6. Tighten the set screw so that the tip of the set screw falls into one of the two bosses of the clamp fitting. Note that the
tightening torque of the set screw is from 0.3 to 0.4 Nm.
7. Put the cable bushing over the plug body and complete the work.
Note that the use of paint lock (e.g., Locktight 263 manufactured by HENKEL JAPAN LTD.) is recommended on the
screw portion to prevent loosening of the P shell unit.
The aforementioned work procedure is for the soldered type. In the case of the crimp-style type, Steps 1 and 3 are changed as
follows:
1. With regard to cables, the wire to be used should have a conductor with a nominal cross-sectional area of 0.05 mm2
(AWG#30) in a finished form suited to each size.
3. Crimp a suitable crimp terminal to the conductor portion of the cable, then fit into the housing of the P shell unit.
6
HR25 Series●High Performance, Microminiature Circular Connectors
Mounting Hole Dimensions Diagram
Mounting hole dimensions are indicated as viewed from the engagement side.
Lock System
Screw Lock Type
Shell Size
Size 7
Size 9
Diagram Symbol
A
B
1.55 +0.05
1.55 +0.05
0
0
+0.03
+0.03
7.25
9.25
-0.02
-0.02
C
4.4 +0.1
5.4 +0.1
0
0
A
D
8 +0.05
10 +0.05
0
0
Mounting Panel
Thickness
0.7
2
0.7
2
~
~
Note: The
mark indicates the engagement guide key position.
▽
Receptacle Dip Post Configuration Dimensions
1.5
1.5
1.5
1.5
1
1
1
1
4
3
6
2
5
4
7
1
3
2
4
8
×φ0.5 +0.1
6
×φ0.5+0.1
0
8
×φ0.5+0.1
0
4
0
Size 7, 4 conductors
Size 7, 6 conductors
Size 7, 8 conductors
2.1
0.7
2.1
0.7
2.1
0.7
2.1
0.7
2.8
1.4
2.8
1.4
1
3
1
2
5
1
4
8
12
6
4
9
10
8
5
9
1
1
1
3
15
1
6
19
20×φ0.5+0.1
1.4
2.8
0
14
16
20
12×φ0.5+0.1
0
16×φ0.5+0.1
1.4
2.8
0
Size 9, 12 conductors
Size 9, 16 conductors
Size 9, 20 conductors
Note:
1. The above diagrams are viewed from the engagement side of the socket insert (i.e., the wiring side of the pin insert).
2. The mark of the above diagrams indicates the engagement guide key position.
▽
3. A tolerance of 0.05 is recommended for dimensions without indication.
7
HR25 Series●High Performance, Microminiature Circular Connectors
Contact Configuration and Basic Specifications
Shell size
Size 7
1
3
6
8
1
2
5
3
2
5
4
7
1
3
2
4
Contact configuration
4
6
Number of contacts
Withstand voltage
Current capacity
4
6
8
100V AC for 1 minute
1 A
Insulation resistance
Contact resistance
1,000 Mø or greater
30 mø
Solder pot inside
diameter
0.5 mm dia.
Shell size
Size 9
1
1
5
2
6
3
7
2
6
3 4 5
7 8 9 10
1
5
2
3
4
8
4
9
8
Contact configuration
6
7
11 12 13 14 15
16 17 18 19
20
10 11 12 13
14 15 16
9 10 11 12
Number of contacts
Withstand voltage
Current capacity
12
16
20
100V AC for 1 minute
1 A
Insulation resistance
Contact resistance
1,000 Mø or greater
30 mø
Solder pot inside
diameter
0.5 mm dia.
Note:
1. The above diagrams are viewed from the engagement side of the socket insert (i.e., the wiring side of the pin insert).
2. The mark of the above diagrams indicates the engagement guide key position.
▽
3. The withstand voltage indicates the test voltage value. For regular use the voltage used should be less than 30 V AC or 42 V DC.
4. The current capacity of the crimp terminals indicates the value when using wire of AWG#30.
5. The insulation resistance indicates a value when measured at 100 V DC.
Precautions
1. Switch off the power of the circuit before disconnecting or plugging-in the connectors.
2. Use connectors with socket contacts at the power side of the circuit.
3. Make sure that the coupling is in completely cocked position.
4. Cable clamping, cable rotation, and other forces may vary with the cable construction. Please make sure that your cable is
suitable for use with these connectors before usage and production.
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 1/2015. Contents are subject to change without notice for the purpose of improvements.
8
相关型号:
©2020 ICPDF网 联系我们和版权申明