HIF6-20PA-1.27DS(71) [HRS]
Board Connector, 20 Contact(s), 2 Row(s), Male, Right Angle, 0.05 inch Pitch, Solder Terminal, Latch, Black Insulator;型号: | HIF6-20PA-1.27DS(71) |
厂家: | HRS |
描述: | Board Connector, 20 Contact(s), 2 Row(s), Male, Right Angle, 0.05 inch Pitch, Solder Terminal, Latch, Black Insulator PC 连接器 |
文件: | 总18页 (文件大小:733K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1.27mm Pitch Two-Piece Connectors
HIF6 Series
Connector in combination with the HIF6 series connection type
●HIF3B Series ●HIF2 Series
(MIL-C-83503)
(Board direct mount type)
2
1
●HIF5 Series
●FD Series
(Card edge type)
(D sub-ribbon connector)
■Features
1. Product Variation
The connection method is available with the board to
board type and insulation displacement type.
Fig.1 (For further information, refer to catalog page B86.)
2. Broad applications
HIF2E, HIF3B and HIF5 can be combined one other,
because the 1.27mm pitch flat cable is used. (Fig.1)
3. Applicable Cables
The applicable cable is a (UL2651) 28 AWG flat cable
(7cores: 0.127mm, outer jacket diameter: 0.8 to1.0mm)
4. Mis-insertion Preventive Structure
The mis-insertion preventive guide prevents mis-
insertion.
■Product Specifications
Current rating : 0.5A
Operating Temperature Range : -55 to +85 ç (Note 1) Storage Temperature Range : -10 to +60ç (Note 2)
Rating
Voltage rating : 125V AC
Operating Humidity Range : 40 to 80%
Operating Humidity Range : 40 to 70% (Note 2)
Item
Specification
Condition
1.Insulation Resistance
2.Withstanding Voltage
3.Contact Resistance
4.Vibration
250V DC
1000MΩ min.
300V AC/1 minute.
No flashover or insulation breakdown.
30mΩ max.
0.1A
Frequency : 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
No electrical discontinuity of 1μs or more
Insulation resistance : 1000MΩ min.
5.Humidity (Steady state)
(-65ç : 30 minutes→15 to 35ç : 5 minutes max.→
125ç : 30 minutes→15 to 35ç : 5 minutes max.) 5 cycles
6.Temperature Cycle
No damage, cracks, or parts looseness.
Contact resistance : 30mΩ max.
7.Durability (Mating/un-mating)
8.Resistance to Soldering heat
500 cycles
Solder bath : 260ç for 10 seconds
Manual soldering : 360ç for 5 seconds
No deformation of components affecting performance.
Note 1 : Includes temperature rise caused by current flow.
Note 2 : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3 : Please note that there is a risk of deforming the lock when an excessive load is applied to the inside.
B69
HIF6 Series●1.27mm Pitch Two-Piece Connectors
■Materials / Finish
Parts
Material
Finish
Black
Remarks
UL94V-0
Insulator
PBT
Copper alloy
Brass
Socket Contact
Pin header Contact
————
Selective gold plating
Product Number Structure
■
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
●Socket and Receptacle
HIF6 A –
* D A – 1.27 DSA L
q
w
e
r
t
y
u
i
q Series Name : HIF6
w Blank
: Ribbon cable insulation displacement type
: Without board mounting hole
A
B
: With board mounting hole
e
Number of contacts : 20, 26, 32, 34, 40, 50, 52, 60, 68, 80, 100
r
t
D
A
: Socket or receptacle
: Selective gold plated
y Contact pitch : 1.27mm
u Contact type : DS : Right angle type
DSA : Straight type
R
: Ribbon cable ID type
i L : Board pre-fixed lock pin
●Pin Header
HIF6 A –
* P A – 1.27 DSA L
q
w
e
r
t
y
u
i
q Series Name : HIF6
w Blank
: With lock
A
B
: Without board mounting hole
: With board mounting hole
e
r
t
Number of contacts : 20, 26, 32, 34, 40, 50, 52, 60, 68, 80, 100
P
A
: Pin header
: Selective gold plated
y Contact pitch : 1.27mm
u Contact style : DS
: Right angle type
DSA : Straight type
i L : Board pre-fixed lock pin
B70
HIF6 Series●1.27mm Pitch Two-Piece Connectors
BFunction Chart
Pin Header
Socket or Receptacle Side
Right Angle
Type with lock
Two pieces of 1.27mm
pitch cable used
a2.54 pitch connector
(MIL-C-83503)
Straight Type
with lock
HIF2B series
HIF3B series
HIF5 series
Ribbon cable FD
(D sub) connector
Right Angle
Type with
Right Angle
Type with
mounting hole
mounting hole
Straight Type
with mounting
hole
Straight Type
with mounting
hole
Right Angle
Type without
mounting hole
Right Angle
Type without
mounting hole
Straight Type
without
mounting hole
Straight Type
without
mounting hole
B71
HIF6 Series●1.27mm Pitch Two-Piece Connectors
■Cable ID Connector
Unit : mm
Unit : mm
RoHS
Part No.
HRS No.
No. of Contacts
A
B
C
D
HIF6-020D-1.27R(20) 630-0001-4 20
HIF6-026D-1.27R(20) 630-0002-7 20
HIF6-032D-1.27R(20) 630-0003-0 20
HIF6-034D-1.27R(20) 630-0004-2 20
HIF6-040D-1.27R(20) 630-0005-5 20
HIF6-050D-1.27R(20) 630-0006-8 20
HIF6-052D-1.27R(20) 630-0007-0 20
HIF6-060D-1.27R(20) 630-0008-3 20
HIF6-068D-1.27R(20) 630-0009-6 20
HIF6-080D-1.27R(20) 630-0010-5 20
HIF6-100D-1.27R(20) 630-0011-8 20
20
26
32
34
40
50
52
60
68
80
100
18.55
22.36
26.17
27.44
31.25
37.60
38.87
43.95
49.03
56.65
69.35
11.43
15.24
19.05
20.32
24.13
30.48
31.75
36.83
41.91
49.53
62.23
13.95
17.76
21.57
22.84
26.65
33.00
34.27
39.35
44.43
52.05
64.75
16.35
20.16
23.97
25.24
29.05
35.40
36.67
41.75
46.83
54.45
67.15
YES
B72
HIF6 Series●1.27mm Pitch Two-Piece Connectors
■Pin Header Right Angle Type with lock
Unit : mm
Number of Contacts
n =
2
Note : Size F indicates the state where the lock is open.
BPCB mounting pattern
● Indicate mark position.
Mating Side
Mating Side
Unit : mm
RoHS
HRS No.
No. of Contacts
A
B
C
D
E
F
Part No.
HIF6-020PA-1.27DS(71) 630-0051-2 71
HIF6-026PA-1.27DS(71) 630-0052-5 71
HIF6-032PA-1.27DS(71) 630-0053-8 71
HIF6-034PA-1.27DS(71) 630-0054-0 71
HIF6-040PA-1.27DS(71) 630-0055-3 71
HIF6-050PA-1.27DS(71) 630-0056-6 71
HIF6-052PA-1.27DS(71) 630-0057-9 71
HIF6-060PA-1.27DS(71) 630-0058-1 71
HIF6-068PA-1.27DS(71) 630-0059-4 71
HIF6-080PA-1.27DS(71) 630-0060-3 71
HIF6-100PA-1.27DS(71) 630-0061-6 71
20
26
32
34
40
50
52
60
68
80
100
30.95
34.76
38.57
39.84
43.65
50.00
51.27
56.35
61.43
69.05
81.75
11.43
15.24
19.05
20.32
24.13
30.48
31.75
36.83
41.91
49.53
62.23
24.55
28.36
32.17
33.44
37.25
43.60
44.87
49.95
55.03
62.65
75.35
18.75
22.56
26.37
27.64
31.45
37.80
39.07
44.15
49.23
56.85
69.55
21.59
25.40
29.21
30.48
34.29
40.64
41.91
46.99
52.07
59.69
72.39
43.55
47.36
51.17
52.44
56.25
62.60
63.87
68.95
74.03
81.65
94.35
YES
B73
HIF6 Series●1.27mm Pitch Two-Piece Connectors
■Pin Header Straight Type with lock
Unit : mm
Number of Contacts
2
n =
BPCB mounting pattern
Guide Key Side
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
Guide Key Side
● Indicate mark position.
(26, 34, 50 contacts)
Note : Size G indicates a state where the lock is open.
(26, 34, 50 contacts)
Unit : mm
Part No.
HRS No.
No. of Contacts
A
B
C
D
E
F
G
RoHS
HIF6-020PA-1.27DSA(71) 630-0101-9 71
HIF6-026PA-1.27DSA(71) 630-0102-1 71
HIF6-032PA-1.27DSA(71) 630-0103-4 71
HIF6-034PA-1.27DSA(71) 630-0104-7 71
HIF6-040PA-1.27DSA(71) 630-0105-0 71
HIF6-050PA-1.27DSA(71) 630-0106-2 71
HIF6-052PA-1.27DSA(71) 630-0107-5 71
HIF6-060PA-1.27DSA(71) 630-0108-8 71
HIF6-068PA-1.27DSA(71) 630-0109-0 71
HIF6-080PA-1.27DSA(71) 630-0110-0 71
HIF6-100PA-1.27DSA(71) 630-0111-2 71
20
26
32
34
40
50
52
60
68
80
100
30.95
34.76
38.57
39.84
43.65
50.00
51.27
56.35
61.43
69.05
81.75
11.43
15.24
19.05
20.32
24.13
30.48
31.75
36.83
41.91
49.53
62.23
24.55
28.36
32.17
33.44
37.25
43.60
44.87
49.95
55.03
62.65
75.35
18.75
22.56
26.37
27.64
31.45
37.80
39.07
44.15
49.23
56.85
69.55
14.95
18.76
22.57
23.84
27.65
34.00
35.27
40.35
45.43
53.05
65.75
21.59
25.40
29.21
30.48
34.29
40.64
41.91
46.99
52.07
59.69
72.39
43.55
47.36
51.17
52.44
56.25
62.60
63.87
68.95
74.03
81.65
94.35
YES
B74
HIF6 Series●1.27mm Pitch Two-Piece Connectors
■Receptacle Right Angle Type with Mounting hole
Unit : mm
Number of Contacts
n =
2
BPCB mounting pattern
Mating Side
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80 contacts)
Mating Side
Mounting hole center line
(26, 34, 50 contacts)
Unit : mm
E RoHS
Part No.
HRS No.
No. of Contacts
A
B
C
D
HIF6B-20DA-1.27DS(71) 631-0051-9 71
HIF6B-26DA-1.27DS(71) 631-0052-1 71
HIF6B-32DA-1.27DS(71) 631-0053-4 71
HIF6B-34DA-1.27DS(71) 631-0054-7 71
HIF6B-40DA-1.27DS(71) 631-0055-0 71
HIF6B-50DA-1.27DS(71) 631-0056-2 71
HIF6B-52DA-1.27DS(71) 631-0057-5 71
HIF6B-60DA-1.27DS(71) 631-0058-8 71
HIF6B-68DA-1.27DS(71) 631-0059-0 71
HIF6B-80DA-1.27DS(71) 631-0060-0 71
20
26
32
34
40
50
52
60
68
80
30.95 20.95 11.43 26.67 18.55
34.76 24.76 15.24 30.48 22.36
38.57 28.57 19.05 34.29 26.17
39.84 29.84 20.32 35.56 27.44
43.65 33.65 24.13 39.37 31.25
50.00 40.00 30.48 45.72 37.60
51.27 41.27 31.75 46.99 38.87
56.35 46.35 36.83 52.07 43.95
61.43 51.43 41.91 57.15 49.03
69.05 59.05 49.53 64.77 56.65
YES
*Lock pin type is
also available.
B75
HIF6 Series●1.27mm Pitch Two-Piece Connectors
■Receptacle Right Angle Type Without Mounting hole
Unit : mm
Number of Contacts
2
n =
BPCB mounting pattern
Mating Side
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80 contacts)
Mating Side
(26, 34, 50 contacts)
Unit : mm
RoHS
Part No.
HRS No.
No. of Contacts
A
B
C
HIF6A-20DA-1.27DS(71) 631-0001-0 71
HIF6A-26DA-1.27DS(71) 631-0002-3 71
HIF6A-32DA-1.27DS(71) 631-0003-6 71
HIF6A-34DA-1.27DS(71) 631-0004-9 71
HIF6A-40DA-1.27DS(71) 631-0005-1 71
HIF6A-50DA-1.27DS(71) 631-0006-4 71
HIF6A-52DA-1.27DS(71) 631-0007-7 71
HIF6A-60DA-1.27DS(71) 631-0008-0 71
HIF6A-68DA-1.27DS(71) 631-0009-2 71
HIF6A-80DA-1.27DS(71) 631-0010-1 71
20
26
32
34
40
50
52
60
68
80
20.95
24.76
28.57
29.84
33.65
40.00
41.27
46.35
51.43
59.05
11.43
15.24
19.05
20.32
24.13
30.48
31.75
36.83
41.91
49.53
18.55
22.36
26.17
27.44
31.25
37.60
38.87
43.95
49.03
56.65
YES
B76
HIF6 Series●1.27mm Pitch Two-Piece Connectors
■Receptacle Straight Type with Mounting hole
Unit : mm
Number of Contacts
n =
2
BPCB mounting pattern
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
Guide Key Side
(26, 34, 50 contacts)
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
Guide Key Side
(26, 34, 50 contacts)
Mounting hole center line
Unit : mm
RoHS
Part No.
HRS No.
No. of Contacts
A
B
C
D
HIF6B-020DA-1.27DSA(71) 631-0151-3 71
HIF6B-026DA-1.27DSA(71) 631-0152-6 71
HIF6B-032DA-1.27DSA(71) 631-0153-9 71
HIF6B-034DA-1.27DSA(71) 631-0154-1 71
HIF6B-040DA-1.27DSA(71) 631-0155-4 71
HIF6B-050DA-1.27DSA(71) 631-0156-7 71
HIF6B-052DA-1.27DSA(71) 631-0157-0 71
HIF6B-060DA-1.27DSA(71) 631-0158-2 71
HIF6B-068DA-1.27DSA(71) 631-0159-5 71
HIF6B-080DA-1.27DSA(71) 631-0160-4 71
HIF6B-100DA-1.27DSA(71) 631-0161-7 71
20
26
32
34
40
50
52
60
68
80
100
30.95
34.76
38.57
39.84
43.65
50.00
51.27
56.35
61.43
69.05
81.75
26.67
30.48
34.29
35.56
39.37
45.72
46.99
52.07
57.15
64.77
77.47
11.43
15.24
19.05
20.32
24.13
30.48
31.75
36.83
41.91
49.53
62.23
18.55
22.36
26.17
27.44
31.25
37.60
38.87
43.95
49.03
56.65
69.35
YES
*Lock pin type is
also available.
B77
HIF6 Series●1.27mm Pitch Two-Piece Connectors
■Receptacle Straight Type without Mounting hole
Unit : mm
Number of Contacts
2
n =
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
BPCB mounting pattern
Guide Key Side
(26, 34, 50 contacts)
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
Guide Key Side
(26, 34, 50 contacts)
Unit : mm
Part No.
HRS No.
No. of Contacts
A
B
C
RoHS
HIF6A-020DA-1.27DSA(71) 631-0101-5 71
HIF6A-026DA-1.27DSA(71) 631-0102-8 71
HIF6A-032DA-1.27DSA(71) 631-0103-0 71
HIF6A-034DA-1.27DSA(71) 631-0104-3 71
HIF6A-040DA-1.27DSA(71) 631-0105-6 71
HIF6A-050DA-1.27DSA(71) 631-0106-9 71
HIF6A-052DA-1.27DSA(71) 631-0107-1 71
HIF6A-060DA-1.27DSA(71) 631-0108-4 71
HIF6A-068DA-1.27DSA(71) 631-0109-7 71
HIF6A-080DA-1.27DSA(71) 631-0110-6 71
HIF6A-100DA-1.27DSA(71) 631-0111-9 71
20
26
32
34
40
50
52
60
68
80
100
20.95
24.76
28.57
29.84
33.65
40.00
41.27
46.35
51.43
59.05
71.75
11.43
15.24
19.05
20.32
24.13
30.48
31.75
36.83
41.91
49.53
62.23
18.55
22.36
26.17
27.44
31.25
37.60
38.87
43.95
49.03
56.65
69.35
YES
B78
HIF6 Series●1.27mm Pitch Two-Piece Connectors
■Pin Header Right Angle Type with Mounting hole
Unit : mm
Number of Contacts
n =
2
BPCB mounting pattern
Mating Side
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
Mating Side
Mounting hole center line
(26, 34, 50 contacts)
Part No.
Unit : mm
E RoHS
HRS No.
No. of Contacts
A
B
C
D
HIF6B-020PA-1.27DS(71) 631-0251-8 71
HIF6B-026PA-1.27DS(71) 631-0252-0 71
HIF6B-032PA-1.27DS(71) 631-0253-3 71
HIF6B-034PA-1.27DS(71) 631-0254-6 71
HIF6B-040PA-1.27DS(71) 631-0255-9 71
HIF6B-050PA-1.27DS(71) 631-0256-1 71
HIF6B-052PA-1.27DS(71) 631-0257-4 71
HIF6B-060PA-1.27DS(71) 631-0258-7 71
HIF6B-068PA-1.27DS(71) 631-0259-0 71
HIF6B-080PA-1.27DS(71) 631-0260-9 71
HIF6B-100PA-1.27DS(71) 631-0261-1 71
20
26
32
34
40
50
52
60
68
80
100
30.95 20.95 18.75 11.43 26.67
34.76 24.76 22.56 15.24 30.48
38.57 28.57 26.37 19.05 34.29
39.84 29.84 27.64 20.32 35.56
43.65 33.65 31.45 24.13 39.37
50.00 40.00 37.80 30.48 45.72 YES
51.27 41.27 39.07 31.75 46.99
56.35 46.35 44.15 36.83 52.07
61.43 51.43 49.23 41.91 57.15
69.05 59.05 56.85 49.53 64.77
81.75 71.75 69.55 62.23 77.47
πLock pin type is
also available.
B79
HIF6 Series●1.27mm Pitch Two-Piece Connectors
■Pin Header Right Angle Type Without Mounting hole
Unit : mm
Number of Contacts
2
n =
BPCB mounting pattern
Mating Side
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
Mating Side
(26, 34, 50 contacts)
Unit : mm
RoHS
Part No.
HRS No.
No. of Contacts
A
B
C
HIF6A-020PA-1.27DS(71) 631-0201-0 71
HIF6A-026PA-1.27DS(71) 631-0202-2 71
HIF6A-032PA-1.27DS(71) 631-0203-5 71
HIF6A-034PA-1.27DS(71) 631-0204-8 71
HIF6A-040PA-1.27DS(71) 631-0205-0 71
HIF6A-050PA-1.27DS(71) 631-0206-3 71
HIF6A-052PA-1.27DS(71) 631-0207-6 71
HIF6A-060PA-1.27DS(71) 631-0208-9 71
HIF6A-068PA-1.27DS(71) 631-0209-1 71
HIF6A-080PA-1.27DS(71) 631-0210-0 71
HIF6A-100PA-1.27DS(71) 631-0211-3 71
20
26
32
34
40
50
52
60
68
80
100
20.95
24.76
28.57
29.84
33.65
40.00
41.27
46.35
51.43
59.05
71.75
18.75
22.56
26.37
27.64
31.45
37.80
39.07
44.15
49.23
56.85
69.55
11.43
15.24
19.05
20.32
24.13
30.48
31.75
36.83
41.91
49.53
62.23
YES
B80
HIF6 Series●1.27mm Pitch Two-Piece Connectors
■Pin Header Straight Type with Mounting hole
Unit : mm
Number of Contacts
n =
2
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
BPCB mounting pattern
Guide Key Side
(26, 34, 50 contacts)
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
Guide Key Side
Mounting hole center line
(26, 34, 50 contacts)
Part No.
Unit : mm
E RoHS
HRS No.
No. of Contacts
A
B
C
D
HIF6B-020PA-1.27DSA(71) 631-0351-2 71
HIF6B-026PA-1.27DSA(71) 631-0352-5 71
HIF6B-032PA-1.27DSA(71) 631-0353-8 71
HIF6B-034PA-1.27DSA(71) 631-0354-0 71
HIF6B-040PA-1.27DSA(71) 631-0355-3 71
HIF6B-050PA-1.27DSA(71) 631-0356-6 71
HIF6B-052PA-1.27DSA(71) 631-0357-9 71
HIF6B-060PA-1.27DSA(71) 631-0358-1 71
HIF6B-068PA-1.27DSA(71) 631-0359-4 71
HIF6B-080PA-1.27DSA(71) 631-0360-3 71
HIF6B-100PA-1.27DSA(71) 631-0361-6 71
20
26
32
34
40
50
52
60
68
80
100
30.95 26.67 20.95 11.43 18.75
34.76 30.48 24.76 15.24 22.56
38.57 34.29 28.57 19.05 26.37
39.84 35.56 29.84 20.32 27.64
43.65 39.37 33.65 24.13 31.45
50.00 45.72 40.00 30.48 37.80 YES
51.27 46.99 41.27 31.75 39.07
56.35 52.07 46.35 36.83 44.15
61.43 57.15 51.43 41.91 49.23
69.05 64.77 59.05 49.53 56.85
81.75 77.47 71.75 62.23 69.55
*Lock pin type is
also available.
B81
HIF6 Series●1.27mm Pitch Two-Piece Connectors
■Pin Header Straight Type Without Mounting hole
Unit : mm
Number of Contacts
2
n =
BPCB mounting pattern
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
Guide Key Side
(26, 34, 50 contacts)
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
Guide Key Side
(26, 34, 50 contacts)
Unit : mm
Part No.
HRS No.
No. of Contacts
A
B
C
RoHS
HIF6A-020PA-1.27DSA(71) 631-0301-4 71
HIF6A-026PA-1.27DSA(71) 631-0302-7 71
HIF6A-032PA-1.27DSA(71) 631-0303-0 71
HIF6A-034PA-1.27DSA(71) 631-0304-2 71
HIF6A-040PA-1.27DSA(71) 631-0305-5 71
HIF6A-050PA-1.27DSA(71) 631-0306-8 71
HIF6A-052PA-1.27DSA(71) 631-0307-0 71
HIF6A-060PA-1.27DSA(71) 631-0308-3 71
HIF6A-068PA-1.27DSA(71) 631-0309-6 71
HIF6A-080PA-1.27DSA(71) 631-0310-5 71
HIF6A-100PA-1.27DSA(71) 631-0311-8 71
20
26
32
34
40
50
52
60
68
80
100
20.95
24.76
28.57
29.84
33.65
40.00
41.27
46.35
51.43
59.05
71.75
11.43
15.24
19.05
20.32
24.13
30.48
31.75
36.83
41.91
49.53
62.23
18.75
22.56
26.37
27.64
31.45
37.80
39.07
44.15
49.23
56.85
69.55
YES
B82
HIF6 Series●1.27mm Pitch Two-Piece Connectors
BConnection Circuit (20, 32, 40, 52, 60, 68, 80, 100 contacts)
Number of Contacts
n =
Type A, B
2
Connection of Cable 1
Connection of Cable 2
A1
A2
an
B1
B2
bn
an
1
bn
1
An
a1
Bn
b1
Type A, A
Connection of Cable 1
Connection of Cable 2
A1
A2
b
b
1
2
B1
B2
a1
a2
An
bn
Bn
an
B83
HIF6 Series●1.27mm Pitch Two-Piece Connectors
BConnection Circuit (26, 40, 50 contacts)
Type A, B
Number of Contacts
2
n =
Connection of Cable 1
Connection of Cable 2
A1
A2
an
B1
B2
bn
an
1
bn
1
An
a1
Bn
b1
Type A, A
Connection of Cable 1
Connection of Cable 2
A1
A2
b
b
1
2
B1
B2
a1
a2
An
bn
Bn
an
B84
HIF6 Series●1.27mm Pitch Two-Piece Connectors
BConnection Jig
●Guide Plate
●Hi-Flex Connection Press
Hi-Flex Connection Press HHP502
550 - 0082 - 2
*Pressing Block
Part No.
Pressing Block A-01
HIF 6 - GPA
HRS No.
550 - 0165 - 8
550-0133-1
●Cable Cutter
●Instruction Manual for HIF6 Connection Service Method
HIF6 Cable Cutter-FC601
550 - 0166 - 0
14 Pages
B85
HIF6 Series●1.27mm Pitch Two-Piece Connectors
■HIF6 Series: Connection Type Coupled Connector
HIF3B Series (MIL-C-83503)
●Compliant with the MIL standard
●The VA idea is reflected on both pin header and socket.
●Products with pull-out tab are available.
●Countermeasures are taken against noises in combination with the applicable cover case.
●The type aligned in single-row, low profile type, is available for pin header locking
system, in addition to standard products.
Number of contacts: 6, 10, 14, 16, 20, 26, 30, 34, 40, 50, 60, 64
HIF2 Series (Board direct mount type)
12-row parallel type (HIF2E)
Number of contacts: 10, 14, 16, 20, 26, 30, 34, 40, 50, 60
2.54mm grid alignment facilitates to the design pattern.
24-row staggered type (HIF2C)
Number of contacts: 10, 14, 16, 20, 26, 30, 34, 40, 50, 60
Mounting height is 4.9mm low profile type.
1
2
HIF5 Series (Card edge ribbon type)
●Three types of full hole, semi-hole and no mount area are provided for the unit mount area.
●Connectors are connected in the bus line system.
●Cables can be returned within the connector mold width.
Number of contacts: 20, 26, 34, 40, 50, 60
FD Series (D sub-ribbon connector)
●The standard pitch 1.27mm ribbon cable can be insulated and displaced by replacing a
jig, in addition to the same pitch 1.38mm as for the D sub connector.
●The space saving type allows to reduce the thickness on the connection side according
to set miniaturization.
●Connectors can be installed from both front and rear sides of the chassis or panel.
Number of contacts: 9, 15, 25, 37
B86
相关型号:
HIF6-20PA-1.27DS(75)
Board Connector, 20 Contact(s), 2 Row(s), Male, Right Angle, 0.05 inch Pitch, Solder Terminal, Latch, Black Insulator
HRS
HIF6-20PA-1.27DSA(71)
Board Connector, 20 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator, ROHS COMPLIANT
HRS
HIF6-20PA-1.27DSA(75)
Board Connector, 20 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal, Latch, Black Insulator
HRS
HIF6-26D-1.27R
Board Connector, 26 Contact(s), 2 Row(s), Female, 0.05 inch Pitch, IDC Terminal, Locking, Black Insulator, Receptacle, ROHS COMPLIANT
HRS
HIF6-26PA-1.27DSA
Board Connector, 26 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator, Receptacle
HRS
HIF6-26PA-1.27DSA(71)
Board Connector, 26 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal, Latch & Eject, Black Insulator, ROHS COMPLIANT
HRS
HIF6-32D-1.27R
Board Connector, 32 Contact(s), 2 Row(s), Female, 0.05 inch Pitch, IDC Terminal, Locking, Black Insulator, Receptacle, ROHS COMPLIANT
HRS
©2020 ICPDF网 联系我们和版权申明