GT5-2P-DS(B) [HRS]
Rectangular Connector;
| 型号： | GT5-2P-DS(B) |
| 厂家： | 
HRS |
| 描述： | Rectangular Connector 连接器 |
| 文件： | 总22页 (文件大小：851K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Coaxial cable connection of Antennas, Sensors, and Com m unication Trunk Lines
SAE/ USCAR-19
Term ination of coaxial cables in autom otive, m edical and instrum entation applications
utilizes a single m otion to crim p the center conductor, shield and outer insulation.
GT5 Series
— Connectors for coaxial cables —
<
Several types and configurations: In-line, board m ounted, com binations of
>
coaxial cable with signal/power, Multi-position and color/ keying variations.
Features
USCAR Standard titled "Square Outer Conductor (SAE/ USCAR-19)" excludes Water Proof type (GT5W)
Cost efficient term ination
Highly efficient and reliable single m otion "Twin Crim p TM " term ination allows high volum e production
with sem i-autom atic equipm ent.
Space-saving Design
Lock-release latching system
Shock / vibration resistant electrical connections
Verification of the full contact insertion
Color and polarizing variations
Excellent High Frequency Perform ance
Refer to V.S.W.R. data on the following pages.
Applications
In-car com m unication, car sensors (tem perature, pressure), autom otive audio system s, GPS antenna system s,
RACS antenna audio/video antenna system s, CRT displays, m edical and m easuring instrum entation, variety of
com m unication equipm ent, office autom ation equipm ent, LAN system s.
*"Twin Crim p "is a registered trade m ark of Hirose Electric.
2 7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
B Test Data (Using 1.5D-2V Type cable)
High Frequency Characteristics (V.S.W.R.)
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1
2.0
3.0GH
Z
1.0
Note: Typical data using fully assem blied and connected GT5-1S-HU and the GT5-1PP-HU.
B Term ination sequence
1. Strip the cable.
2. Crim p the cable to the term inal.
3.5
5
9.5
3. Insert the term inal in the housing until is fully locked.
4. Fully insert the retainer.
2 8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
Term inals for coaxial shielded cable
21.7
F Connector Term inals
Inner Insulation
Diam eter
Outer
Diam eter
Part Num ber
CL No.
Conductor Size (AWG)
Packaging
755-0065-1
755-0078-3
755-0022-9
755-0002-1
755-0071-4
755-0077-0
755-0054-5
755-0016-6
755-0012-5
755-0034-8
755-0020-3
755-0024-4
755-0036-3
#30 or equivalent
0.6 to 0.9m m 1.4 to 1.8m m 1,300 pcs. per reel
1.5 to 2.0m m 2.3 to 2.7m m 1,300 pcs. per reel
GT5-30/0.7-1.5SCF
GT5-2428/1.6-2.5SCF
GT5-30/1.6-2.9SCF
GT5-2428/1.6-2.9SCF
GT5-2022/1.6-2.9SCF
GT5-2022/F2.7-3.5SCF
GT5-2022/F3.3-3.8SCF
GT5-30/3.3-5SCF
#30 or equivalent
#24 to 28 or equivalent
#24 to 28 or equivalent 1.5 to 2.0m m 2.6 to 3.4m m 1,300 pcs. per reel
#20 to 22 or equivalent
#20 to 22 or equivalent 2.4 to 2.9m m 3.3 to 3.7m m 1,100 pcs. per reel
#20 to 22 or equivalent 2.5 to 2.9m m 3.6 to 4.0m m 1,100 pcs. per reel
#30 or equivalent
*
*
*
*
*
*
*
#24 to 28 or equivalent 2.5 to 2.9m m 4.6 to 5.0m m 1,100 pcs. per reel
#20 to 22 or equivalent
GT5-2428/F3.3-5SCF
GT5-2022/F3.3-5SCF
GT5-30/F4-5SCF
Part
Material
Finish
#30 or equivalent
PBT
Phosphor bronze
Brass
Insulator
Color: Dark gray
Tin plating
1,100 pcs. per reel
#24 to 28 or equivalent 3.0 to 3.6m m 4.6 to 5.0m m
#20 to 22 or equivalent
GT5-2428/F4-5SCF
GT5-2022/F4-5SCF
Crim p term inals
Outer term inals
Tin plating
Note: Products m arked with an asterisk (*) indicate polyethylene foam insulation.
M Connector Term inals
23.05
Inner Insulation
Diam eter
Outer
Diam eter
Part Num ber
CL No.
Conductor Size (AWG)
Packaging
GT5-30/0.7-1.5PCF
GT5-30/1.6-2.9PCF
GT5-2428/1.6-2.9PCF
GT5-2022/1.6-2.9PCF
GT5-2022/F2.7-3.5PCF
GT5-2022/F3.3-3.8PCF
GT5-30/F3.3-5PCF
GT5-2428/F3.3-5PCF
GT5-2022/F3.3-5PCF
GT5-30/F4-5PCF
755-0017-9
755-0021-6
755-0001-9
755-0094-0
755-0076-8
755-0053-2
755-0015-3
755-0011-2
755-0033-5
755-0019-4
755-0023-1
755-0035-0
#30 or equivalent
#30 or equivalent
0.6 to 0.9m m 1.4 to 1.8m m 900 pcs. per reel
#24 to 28 or equivalent 1.5 to 2.0m m 2.6 to 3.4m m 900 pcs. per reel
#20 to 22 or equivalent
#20 to 22 or equivalent 2.4 to 2.9m m 3.3 to 3.7m m 900 pcs. per reel
#20 to 22 or equivalent 2.5 to 2.9m m 3.6 to 4.0m m 900 pcs. per reel
#30 or equivalent
*
*
*
*
*
*
*
#24 to 28 or equivalent 2.5 to 2.9m m 4.6 to 5.0m m 900 pcs. per reel
#20 to 22 or equivalent
Part
Material
Finish
PBT
Brass
Brass
#30 or equivalent
Insulator
Color: Dark gray
Tin plating
GT5-2428/F4-5PCF
GT5-2022/F4-5PCF
#24 to 28 or equivalent 3.0 to 3.6m m 4.6 to 5.0m m 900 pcs. per reel
#20 to 22 or equivalent
Crim p term inals
Outer term inals
Tin plating
Note: Products m arked with an asterisk (*) indicate polyethylene foam insulation.
23.05
Low -insertion M Connector Term inals
Inner Insulation
Diam eter
Outer
Diam eter
Part Num ber
HRS No.
Conductor Size (AWG)
Packaging
Part
Material
Finish
GT5L-30/0.7-1.5PCF
GT5L-30/1.6-2.9PCF
GT5L-2428/1.6-2.9PCF
GT5L-2428/1.6-2.5PCF
755-0068-0
755-0067-7
755-0066-4
755-0079-6
#30 or equivalent
#30 or equivalent
0.6 to 0.9m m 1.4 to 1.8m m
900 pcs. per reel
PBT
Brass
Brass
Insulator
Color: Dark gray
Tin plating
#24 to 28 or equivalent 1.5 to 2.0m m 2.6 to 3.4m m
#24 to 28 or equivalent
900 pcs. per reel
Crim p term inals
Outer term inals
Tin plating
2 9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
B
Keying Configurations
For Single-Conductor coaxial shielded cable
F Connectors
Housings
Figure q
Figure
w
Figure e
25
Figure
r
Figure t Figure y
GT5-1S-HU
Figure u
Figure i Figure o
Key polarizing Corresponding M Connector Corresponding M Connector USCAR-19
B
Show n w ith inserted retainer.
Part Num ber
GT5-1S-HU
CL No.
Material
Color
code
Housing- In-line
Assem bly- Board Mounting
Coding
755-0004-7
755-0037-6
755-0038-9
755-0080-5
755-0081-8
755-0082-0
Note 1
Light gray
Brown
GT5-1PP-HU
GT5-1P-DS
Figure q
Figure w
Figure e
Figure r
Figure t
Figure y
Figure u
Figure i
Figure o
(26.35)
GT5-1S-HU(A)
GT5-1S-HU(B)
GT5-1S-HU(C)
GT5-1S-HU(D)
GT5-1S-HU(E)
GT5-1S-HU(I)
GT5-1S-HU(J )
GT5-1S-HU(K)
GT5-1PP-HU(A)
GT5-1PP-HU(B)
GT5-1PP-HU(C)
GT5-1PP-HU(D)
GT5-1PP-HU(E)
GT5-1PP-HU(I)
GT5-1PP-HU(J )
GT5-1PP-HU(K)
GT5-1P-DS(A)
GT5-1P-DS(B)
GT5-1P-DS(C)
GT5-1P-DS(D)
GT5-1P-DS(E)
GT5-1P-DS(I)
GT5-1P-DS(J )
GT5-1P-DS(K)
A
B
C
D
E
I
Green
Blue
PBT
Purple
Pink
Black
Note 1
Cream white
Pastel orange
J
Retainer
Note 1
K
Term inal extraction tool: GT-PO(A), Note 1: concept only
Retainer (-Optional-Used w ith the housings: GT5-1S-HU,
GT5-1PP-HU, GT5N-1PP-HU, GT5H-1PP-HU)
14.8
Part Num ber
GT5-1P/S-R
CL No.
Material
PBT
Color
755-0006-2
Dark gray
Housing (Not requiring use of the retainer)
25
GT5R-1S/HU
Part Num ber
GT5R-1S-HU
CL No.
Material
PBT
Color
755-0047-0
Light gray
Term inal extraction tool: GT-PO(A)
3 0
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
B
Keying Configurations
M Connectors
Housings
30
Figure q
Figure w
Figure e
Figure y
Figure o
Mounting bracket
attachment side
Figure r
Figure t
Outside ground connection
Figure u
Figure i
Corresponding F Connector
Housing
Key polarizing
code
USCAR-19
Coding
Part Num ber
CL No.
Color
BShow n w ith inserted retainer.
GT5-1PP-HU
755-0005-0
755-0039-1
755-0040-0
755-0103-9
755-0104-1
755-0105-4
Note 1
GT5-1S-HU
Light Gray
Brown
Figure q
Figure w
Figure e
Figure r
Figure t
Figure y
Figure u
Figure i
Figure o
GT5-1PP-HU(A)
GT5-1PP-HU(B)
GT5-1PP-HU(C)
GT5-1PP-HU(D)
GT5-1PP-HU(E)
GT5-1PP-HU(I)
GT5-1PP-HU(J )
GT5-1PP-HU(K)
GT5-1S-HU(A)
GT5-1S-HU(B)
GT5-1S-HU(C)
GT5-1S-HU(D)
GT5-1S-HU(E)
GT5-1S-HU(I)
GT5-1S-HU(J )
GT5-1S-HU(K)
A
B
C
D
E
I
(31.35)
Green
Blue
Purple
Pink
Black
Note 1
Cream white
Pastel orange
J
Retainer
Note 1
K
* Refer to pages 32 and 34 for panel brackets used with in-line connectors.
* Term inal extraction tool: GT-PO(A)
Note 1: concept only
Part
Material
PBT
Finish
Housing
Color: Dark gray
Tin plating
Ground term inal
Phosphor bronze
Housings (For use w ith H type
m ounting bracket)
BFully m ated connector assem blies.
14.3
30
25
11.8
(41.4)
(11.4)
GT5-1S-HU
GT5H-1PP-HU
GT5-1P/S-R
(1.35)
GT5-1P/S-R
(1.35)
20.25
Corresponding F Connector
Part Num ber
CL No.
Color
Housing
GT5-1S-HU
GT5R-1S-HU
GT5H-1PP-HU (10)
GT5H-1PP-HU (41)
755-0093-7 10
755-0093-7 41
Light Gray
Blue
BFully m ated connector assem blies.
Housing (For use w ith N type m ounting
bracket)
(41.4)
30
25
30
(11.4)
GT5-1S-HU
GT5-1P/S-R
12.2
GT5N-1PP-HU
GT5-1P/S-R
17
6.8
9.2
(1.35)
(1.35)
Corresponding F Connector
Housing
Part Num ber
CL No.
Color
GT5-1S-HU
GT5N-1PP-HU
755-0090-9
Light Gray
GT5R-1S-HU
3 1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
Housings
Panel m ounting, enhanced
shielding configuration
[
]
BRecom m ended Panel Cut-out
19
10.4
15
BMounted and fully m ated connector
assem blies
19
30
30
GT5-1S-HU
GT5-1P/S-R
15
Panel
thickness:1.6
M3
Part Num ber
GT5A-1PP-HU
CL No.
Part
Material
Finish
Housing
PBT
Color: Light gray
Tin plating
755-0025-7
Ground term inal
Brass
Note 1: Term inal extraction tool: GT-PO(A)
Note 2: Retainer is optional.
Note 3: Use J IS B 1111 and 1101 M3 screws for the m ounting screws.
4
15
30
9.5
Part Num ber
GT5P-1PP-HU
CL No.
Part
Material
Finish
Housing
PBT
Color: Light gray
Tin plating
755-0030-7
Ground term inal
Brass
Note 1: Term inal extraction tool: GT-PO(A)
Note 2: Retainer is optional.
Note 3: Use J IS B 1111 and 1101 M3 screws for the m ounting screws.
3 2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
30
3.2
BMounted and fully m ated connector
assem blies
27.4
12.3
GT5-1S-HU
GT5-1P/S-R
1
2.6
Chassis
1.2
Assembly Diagram(1:1)
5
1.2
Part Num ber
GT5B-1PP-HU
CL No.
Part
Material
Finish
Housing
PBT
Color: Light gray
Tin plating
755-0051-7
Ground term inal
Copper alloy
Note 1: Term inal extraction tool: GT-PO(A) with nom inal diam eter 3L-6 (for a board thickness of 1.6 m m ).
Note 2: Retainer is optional.
Note 3: Use J IS B 1115 and 1122 class 4, nom inal diam eter 3, length 6 screws for the m ounting screws.
30
BMounted and fully m ated connector
assem blies
27.4
12.3
GT5-1S-HU
GT5-1P/S-R
Chassis
3.6
2.6
Assembly Diagram (1:1)
4
3.2
Part Num ber
GT5S-1PP-HU
CL No.
Part
Material
Finish
Housing
PBT
Color: Light gray
Tin plating
755-0050-4
Ground term inal
Copper alloy
Note 1: Term inal extraction tool: GT-PO(A) with nom inal diam eter 3L-6 (for a board thickness of 1.6 m m ).
Note 2: Retainer is optional.
Note 3: Use J IS B 1115 and 1122 class 4, nom inal diam eter 3, length 6 screws for the m ounting screws.
3 3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
21.3
12.8
11.8
12.8
11.8
Connector assem bly, Printed
Circuit Board Mounting Type
11.8
Figure q
Figure w
Figure e
12.8
Figure t
Figure r
Figure y
12.8
BDiagram of Mated Connector in Use
21.3
GT5-1
GT5-1P-DS
Figure u
Figure i
Figure o
BRecom m ended PCB Mounting Pattern
GT5-1P/S-R
Note
Key polarizing
code
Corresponding F Connector
Housing
Part Num ber
GT5-1P-DS
CL No.
Color
M Connector-Board Type
755-0007-5
755-0041-3
755-0042-6
755-0083-3
755-0084-6
755-0085-9
Note 2
Light Gray
Brown
GT5-1P-DS
GT5-1S-HU
Figure q
Figure w
Figure e
Figure r
Figure t
Figure y
Figure u
Figure i
Figure o
Outlines
GT5-1P-DS(A)
GT5-1P-DS(B)
GT5-1P-DS(C)
GT5-1P-DS(D)
GT5-1P-DS(E)
GT5-1P-DS(I)
GT5-1P-DS(J )
GT5-1P-DS(K)
GT5-1P-DS(A)
GT5-1P-DS(B)
GT5-1P-DS(C)
GT5-1P-DS(D)
GT5-1P-DS(E)
GT5-1P-DS(I)
GT5-1P-DS(J )
GT5-1P-DS(K)
GT5-1S-HU(A)
GT5-1S-HU(B)
GT5-1S-HU(C)
GT5-1S-HU(D)
GT5-1S-HU(E)
GT5-1S-HU(I)
GT5-1S-HU(J )
GT5-1S-HU(K)
Green
Blue
Part
Material
Finish
Purple
Pink
Housing
0.65 x 1.1 Term inals
Insulator
PBT
Brass
-
Black
Tin plating
Dark gray
Tin plating
Note 2
Cream white
Pastel orange
PBT
Note 2
Outer term inals
Phosphor bronze
Note: Use J IS B 1115 and 1122 class 4, nom inal diam eter 3, length 6 screws (for a board thickness of
1.6 m m ) for the m ounting screws.
* Eight types of keys are available.
Please use a m ating F connector housing of a m atching key type.
3 4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
Tw o-position type-Each Single-Conductor coaxial cable
F Connectors
BKeying Configurations
Housings
25
Figure q
Figure w
Figure e
Figure r
25
Key polarizing USCAR-19
Part Num ber
GT5-2S-HU
CL No.
Material
PBT
Color
code
Coding
755-0044-1
755-0059-9
755-0060-8
755-0097-8
Light Gray
Brown
Green
D2
Figure q
Figure w
Figure e
Figure r
GT5-2P/S-R
GT5-2S-HU(A)
GT5-2S-HU(B)
GT5-2S-HU(C)
A2
B2
C2
Show n w ith inserted retainer.
Blue
Note 1: Used with separate retainer (GT5-2P/S-R).
Note 2: Please use a m ating F connector of a m atching key type.
Note 3: Term inal extraction tool: GT-PO(A)
M Connectors
BRecom m ended Mounting Bracket dim ensions.
more than 4.75
17.75
Housings[Panel Mounted Housing]
5
2.8
1.5
1.3
Tin plating
30
25
5
14.5
8
21.8
CAV NO
BFully m ated connector assem blies
41.4
GT5-2S-HU
GT5-2P/S-R
GT5-2P/S-R
BKeying Configurations
Key polarizing
code
Part Num ber
GT5-2PP-HU
CL No.
Color
Figure q
Figure w
Figure e
Figure r
755-0045-4
755-0063-6
755-0064-9
755-0099-3
Light Gray
Brown
Green
Figure q
Figure w
Figure e
Figure r
Part
Material
PBT
Finish
GT5-2PP-HU(A)
GT5-2PP-HU(B)
GT5-2PP-HU(C)
Housing
-
Blue
Ground term inal
Phosphor bronze
Tin plating
Note: Used with separate retainer (GT5-2P/S-R).
Coding D2 at USCAR-19 is GT5-2PP-HU.
3 5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
Housing
BDiagram of Mated Connector in Use
18.8
30
25
41.4
GT5-2S-HU
GT5-2P/S-R
GT5-2P/S-R
Part Num ber
CL No.
Material
PBT
Color
GT5N-2PP-HU
755-0055-8
Light gray
Note 1:Term inal extraction tool: GT-PO(A)
Note 2: Used with separate retainer (GT5-2P/S-R).
Retainer – 2 position (Used w ith GT5-2S-HU, GT5-2PP-HU,
and GT5N-2PP-HU)
14.8
CAV NO
Part Num ber
GT5-2P/S-R
CL No.
Material
PBT
Color
755-0046-7
Dark gray
BKeying Configurations
Housings
18.8
Figure
q
Figure
w
Figure
e
Figure r
BRecom m ended Board Mounting
BMounted and fully m ated
connector assem blies
Pattern
Panel
5.45
21.3
7
7.7
For inner conductor
27.4
For outer conductor
14.05
0.3
14.05
0.3
14.05
0.3
14.05
0.3
Key polarizing USCAR-19
Part Num ber
CL No.
Material
PBT
Color
code
Coding
8.2
3.6 8.2
GT5-2P-DS
755-0043-9
755-0061-0
755-0062-3
755-0101-3
Light Gray
Brown
Green
D2
Figure q
Figure w
Figure e
Figure r
Board
Board
1.5
11.8
GT5-2P-DS(A)
GT5-2P-DS(B)
GT5-2P-DS(C)
A2
B2
C2
3.6
Board
Blue
GT5-2P-DS (D)
GT5-2P-DS (A)
GT5-2P-DS (B)
GT5-2P-DS (C)
Recom m ended Panel Cut-out
Note: Use J IS B 1115 and 1122 class 4, nom inal diam eter 3, length 6 screws
(for a board thickness of 1.6 m m ) for the m ounting screws.
Coding D2 at USCAR-19 is GT5-2P-DS.
3 6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
( For use w ith com bination type assem blies:
GT5-2/ 1S-HU, GT5-2/ 1P-DS, GT5-2/ 1PP-HU, GT5N-2/ 1PP-HU)
Pow er Supply Term inals
F Connector Term inals
2.3
2.8
Outer
Diam eter
Part Num ber
CL No.
Material
Finish
Conductor Size (AWG)
Packaging
GT7-2022SCF
757-0001-1
757-0003-7
#20 to 22
#20 to 22
1.4 to 2.4m m
2.6 to 3.1m m
5,000
3,000
Copper alloy
Tin plating
GT7A-2022SCF
Note 1: Sold by the reel. (See above table for num ber of Packaging.)
Note 2: This com ponent is used only with applicable HRS housings.
M Connector Term inals
2.8
1.9
2.7
Outer
Diam eter
Part Num ber
CL No.
Material
Brass
Finish
Packaging
GT7-2022PCF
757-0002-4
757-0004-0
1.4 to 2.4m m
2.6 to 3.1m m
5,000
3,000
Tin plating
GT7A-2022PCF
Note 1: Sold by the reel. (See above table for num ber of Packaging.)
Note 2: This com ponent is used only with applicable HRS housings.
3 7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
Combinaton Type (Two Single-Conductor Coaxial Cables + One Power contact)
F Connectors
BShow n w ith inserted retainer.
Housing
Retainer
25
Part Num ber
GT5-2/1S-HU
CL No.
Material
PBT
Color
755-0009-0
Light gray
Note 1:Term inal extraction tool: GT-PO(A)
Note 2: Used with separate retainer (GT5-2/1S-R).
Retainer (exclusively for GT5-2/ 1S-HU)
17.28
Part Num ber
GT5-2/1S-R
CL No.
Material
PBT
Color
755-0003-4
Dark gray
B
Recom m ended Board Mounting Pattern
M Connectors
Connector assem bly, Printed
Circuit Board m ounting
For power supply
For inner conductor
21.3
23.3
For outside conductor
Thickness :
1.6mm
BRecom m ended Panel Cut-out
13.3
0.3
Part
Housing
Material
Finish
PBT
Brass
PBT
Color: Light gray
Tin plating
Dark gray
0. 64x1.1 Term inal
Insulator
Part Num ber
GT5-2/1P-DS
CL No.
Outer term inal
Phosphor bronze
Brass
Tin plating
Tin plating
755-0014-0
Tub term inal for DS 070
Note: Use J IS B 1115 and 1122 class 4, nom inal diam eter 3, length 6 screws (for a board
Board
thickness of 1.6 m m ) for the m ounting screws.
3 8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
BShow n w ith inserted retainer.
M Connectors
Housing - w ith External Ground
Retainer
30
26.3
B
Recom m ended Mounting Bracket Dim ensions
17.75
4.75min.
5
2.8
Mounting bracket
attachment side
1.5
Outside ground connection
Part Num ber
CL No.
Part
Material
PBT
Finish
Housing
Color: Light gray
Tin plating
GT5-2/1PP-HU
755-0008-8
Tin plating finish
Ground term inal
Phosphor bronze
5
Note 1: Term inal extraction tool: GT-PO(A)
Note 2: Used with separate retainer (GT5-2/1PP-R ).
14.5
8
Housing - w ithout External Ground
30
25
23.3
Part Num ber
CL No.
Material
PBT
Color
GT5N-2/1PP-HU
755-0013-8
Light gray
Note 1: Term inal extraction tool: GT-PO(A)
Note 2: Used with separate retainer GT5-2/1PP-R.
Retainer (Used w ith GT5N-2/ 1PP-HU and GT5-2/ 1PP-HU)
15.36
GT5-2 / 1PP-R
Part Num ber
GT5-2/1PP-R
CL No.
Material
PBT
Color
755-0010-0
Dark gray
3 9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
4-Position – Single conductor Coaxial cable
BShow n w ith inserted retainer.
F Connector
GT5-4P/S-R
25
USCAR-19
Coding
Part Num ber
GT5-4S-HU
CL No.
Material
PBT
Color
755-0056-0
Light gray
D4
Note: Used with separate retainer (GT5-4P/S-R).
M Connector
35.8
31.9
30
21.5
14.6
3
9.2
8.5
USCAR-19
Coding
Part Num ber
CL No.
Material
PBT
Color
GT5N-4PP-HU
755-0057-3
Light gray
D4
Note 1: The product should be used with a low-force insertion/withdrawal M connector
term inal.
Note 2: Used with separate retainer GT5-4P/S-R.
Retainer (Used w ith GT5-4S-HU and GT5N-4PP-HU)
14.8
Part Num ber
GT5-4P/S-R
CL No.
Material
PBT
Color
755-0058-6
Dark gray
4 0
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
12.6
Lot No.
M Connector
Connector assem bly, Printed Circuit
Board Mounting
21.3
15.1
PIN No
CAV NO
5.25
3
4
USCAR-19
Coding
10
Part Num ber
GT5-4P-DS
CL No.
24
755-0087-4
D4
Item
Material
Color / Finish
Light gray
Tin plating
Dark gray
Tin plating
Housing
0.64✕1.1Terminal
Insulator
PBT
Brass
PBT
Outside tube terminal Phosphor bronze
B Recom m ended Board Mounting Pattern
B Recom m ended Panel Cut-out
For inner conductors
14.2
0.3
For outer conductors
Panel Outline
B Mounted and fully m ated connector assem blies
21.3
PCB Board Outline
M3 Screw
Board
Panel
4 1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
Single Conductor Coaxial Cable - Waterproof Type
F Connector
36
Housing
Part Num ber
GT5W-1S-HU
CL No.
Color
Material
PBT
755-0027-2
Light gray
Note: Specific retainer is determ ined by the type of the cable used.
Retainer (Used w ith GT5W-1P-HU, GT5J W-1PP-HU,
GT5W-1S-HU and GT5W-1P-HU)
15.4
8.7
Part Num ber
GT5W-1P/S-R
CL No.
Color
Material
PBT
Dark gray
Dark gray
755-0028-5
Silicon rubber Com pound
Note: Outer diam eter of the cable m ust be within 2.9 to 3.4 m m . Consult nearest HRS
representative for other diam eters.
4 2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
M Connectors
34
Housing
Part Num ber
GT5W-1P-HU
CL No.
Part
Material
Color
Housing
PBT
Light gray
White
755-0026-0
Connector seal
Silicon rubber
Note: Use correct retainer.
Housings - Bracket Mounting
BMounted and fully m ated connector assem blies
BRecom m ended Bracket Dim ensions
Part Num ber
CL No.
A
B
Part
Material
PBT
Color
GT5W-1PP-HU
GT5J W-1PP-HU
755-0070-1
755-0069-2
1.5
3.2
1.3
3.0
Housing
Light gray
White
Connector seal
Silicon rubber Com pound
4 3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
14.6
10.8
G Term inals
For Direct Coaxial Cable Term ination
9.3
BBoard Term ination Pattern
2.8
2.3
1
Lands
BCom pleted Term ination cross section
1.9
1.5D-2V or equivalent
Part Num ber
GTA-1.6CF
CL No.
Material
Brass
Finish
Packaging
7
2
3.5
755-0032-2
Tin plating
1,500 pcs. Per reel
BCom pleted Term ination cross section
1.5D-2V or equivalent
3.5
Pre-solder
Heat-shrink tubing
3.5
B
Board Term ination Pattern
3.5
Part Num ber
GTB-1.6CF
CL No.
Material
Brass
Finish
Packaging
755-0049-5
Tin plating
1,500 pcs. Per reel
BCom pleted Term ination cross section
1.9
1.5D-2V or equivalent
6.9
6.3
3
2
3.5
7
Heat-shrink tubing
B
Board Term ination Pattern
2.9
2.3
Lands
0.4
Part Num ber
G-1.6PCF
CL No.
Material
Brass
Finish
Packaging
1,500 pcs. Per reel
755-0029-8
Tin plating
4 4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
6.15
0.25
For Direct Coaxial Cable Term ination
0.25
10.5
9
15
0.5
2
BRecom m ended Board
Term ination Pattern
2.9
1
3.3
BCom pleted Term ination Cross Section
1.9
Lands
Pre-solder
Part Num ber
GTA-0.7CF
CL No.
Material
Brass
Finish
Packaging
1,500 pcs. Per reel
2.8
3.5
13.6
755-0074-2
Tin plating
2.8
0.25
9.8
0.15
8.55
0.5 1.5
BRecom m ended Board
Term ination Pattern
1.9
2.4
1.8
2.6
BRecom m ended Com pleted Term ination cross
1.9
section
Pre-soider
Lands
Lands
Part Num ber
GTB-0.7CF
CL No.
Material
Brass
Finish
Packaging
0.7D
equivalent
755-0075-5
Tin plating
1,500 pcs. Per reel
7.4
0.7 3.5
BRecom m ended Panel Cut-out
For Mid-Cable Term ination
A
B
A
C
8.2
6.5
B
4.6
2.5
2.5
C
0.2
Raised point of
contact
BAttachm ent Diagram
Panel
6
T-0.4
For use with
coaxial cables
2.9 to 3.4 mm.
outside diameter.
Part Num ber
GT-1.6PG-C
CL No.
Material
Brass
Finish
Packaging
1
755-0031-0
Tin plating
Setscrew (M2.5)
4 5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
Bottom Shield cover
5.4
For Im proved Electronic Noise Com patibility
5
5.6
Mounted Condition Installed
Part Num ber
CL No.
Material
Brass
Finish
GT5-1P/S-CSB
755-0048-2
Tin plating
Top Shield cover
5.6
T=0.25
Mounted Condition Installed
Part Num ber
GT5C-1P-CSB
CL No.
755-0088-7
4 6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
Panel Mounting In-line Bracket
4.5
9.8
T=1
1.1
12
GT-BK
8
GT-BK (01)
Part Num ber
CL No.
Material
Finish
Used with connectors
GT5-1PP-HU(A), GT5-1PP-HU(B),
GT5-1PP-HU(C), GT5-1PP-HU(D),
GT5-1PP-HU(E), GT5-1PP-HU(I),
GT5-1PP-HU(J ), GT5-1PP-HU(K),
GT5-2/1PP-HU, GT5-2PP-HU,
GT5-2PP-HU(A), GT5-2PP-HU(B),
GT5-2PP-HU(C)
GT-BK
751-0039-6
Tin plating
SPCC
GT-BK(01)
751-0039-6-01
Zinc plating
B Term ination Tools
User's m anuals are available. Please ask your Hirose Electric account representative.
Autom atic crim ping m achine
Specifications
Item
Specification
Stroke length
Num ber of strokes
Weight
Specification
1.5tons
Rem arks
30m m
200spm (50Hz)
75kg
200spm (60Hz)
AC100V
Motor
0.2kW
Crim ping speed
2000 to 4000pcs. Per day
Part Num ber CM-105
* Crim p height setting tables are available for each cable type. Please contact your
nearest Hirose Electric account representative.
Different cables will require different crim p height settings.
4 7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
GT5 Series
✕ Harnes Tool
Name of Applicabe Terminal
GT5-30/1.6-2.9PCF
Name of Applicabe Applicator
CL No.
AP105-GT5-30/1.6-2.9P-ID
AP105-GT5-30/1.6-2.9P
CL901-5019-6
CL901-5017-0
CL901-5040-2
CL901-5020-5
CL901-5018-3
CL901-5029-0
CL901-5031-1
CL901-5030-9
CL901-5032-4
CL901-5037-8
CL901-5038-0
CL901-5058-8
CL901-5059-0
CL901-5070-3
CL901-5060-0
CL901-5061-2
CL901-5071-6
CL901-5033-7
CL901-5034-0
CL901-5035-2
CL901-5056-2
CL901-5036-5
CL901-5057-5
CL901-5054-7
CL901-5052-1
CL901-5055-0
CL901-5053-4
CL901-5021-8
CL901-5080-7
CL901-5091-3
CL901-5092-6
CL901-5088-9
AP105-GT5-30/1.6-2.9P-A
AP105-GT5-30/1.6-2.9S-ID
AP105-GT5-30/1.6-2.9S
GT5-30/1.6-2.9SCF
GT5-2428/1.6-2.9PCF
GT5-2428/1.6-2.9SCF
AP105-GT5-2428/1.6-2.9P
AP105-GT5-2428/1.6-2.9PWS
AP105-GT5-2428/1.6-2.9S
AP105-GT5-2428/1.6-2.9SWS
AP105-GT5-2428/F3.3-5P-ID
AP105-GT5-2428/F3.3-5S-ID
AP105-GT5-2022/F3.3-5P-ID
AP105-GT5-2022/F3.3-5P
AP105-GT5-2022/F3.3-5P2.2D-ID
AP105-GT5-2022/F3.3-5S-ID
AP105-GT5-2022/F3.3-5S
AP105-GT5-2022/F3.3-5S2.2D-ID
AP105-GT5-30/F4-5P-ID
GT5-2428/F3.3-5PCF
GT5-2428/F3.3-5SCF
GT5-2022/F3.3-5PCF
GT5-2022/F3.3-5SCF
GT5-30/F4-5PCF
GT5-30/F4-5SCF
AP105-GT5-30/F4-5S-ID
AP105-GT5-2428/F4-5P-ID
AP105-GT5-2428/F4-5P-3C2V
AP105-GT5-2428/F4-5S-ID
AP105-GT5-2428/F4-5S-3C2V
AP105-GT5-2022/F4-5P-ID
AP105-GT5-2022/F4-5P
GT5-2428/F4-5PCF
GT5-2428/F4-5SCF
GT5-2022/F4-5PCF
GT5-2022/F4-5SCF
AP105-GT5-2022/F4-5S-ID
AP105-GT5-2022/F4-5S
GT5-30/0.7-1.5PCF
AP105-GT5-30/0.7-1.5P
GT5-30/0.7-1.5SCF
AP105-GT5-30/0.7-1.5S
GT5-2022/F2.7-3.5PCF
GT5-2022/F2.7-3.5SCF
GT5-2022/1.6-2.9SCF
GT5-2022/F3.3-3.8PCF
GT5-2022/F3.3-3.8SCF
GT5-2428/1.6-2.5PCF
GT5-2428/1.6-2.5SCF
GT5-2428/1.6-2.9PCF
GT5-2428/1.6-2.9SCF
AP105-GT5-2022/F2.7-3.5P
AP105-GT5-2022/F2.7-3.5S
AP105-GT5-2022/1.6-2.9S
AP105-GT5-2022/3.3-3.8P
AP105-GT5-2022/3.3-3.8S
AP105-GT5-2428/1.6-2.5P
AP105-GT5-2428/1.6-2.5S
AP105-GT5-2428/1.6-2.9P-B
AP105-GT5-2428/1.6-2.9S-B
AP105-GT5-2022/F4-5S-18ID
AP105-GT5-2022/F4-5S-RG58
AP105-GT5-2022/F4-5P-RG58
CL901-5100-3
CL901-5101-5
CL901-5103-0
CL901-5104-6
CL901-5102-8
CL901-5015-6
CL901-5016-9
GT5-2022/F4-5SCF
GT5-2022/F4-5PCF
4 8
相关型号：
©2020 ICPDF网 联系我们和版权申明