GT11-2428PCF [HRS]
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines; 同轴电缆连接天线，传感器和通信干线
| 型号： | GT11-2428PCF |
| 厂家： | 
HRS |
| 描述： | Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines |
| 文件： | 总16页 (文件大小：414K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
GT11 Series
— Connectors for coaxial cables —
Features
Cost efficient termination
Highly efficient and reliable single motion crimp termination allows high volume production with semi-
automatic equipment.
Lock-release latching system
Shock / vibration resistant electrical connections
Verification of the full contact insertion
77
For Double-Conductor coaxial shielded cable
F Connectors
Outer terminals
Part Number
CL No.
Applicable Cable
Item
Material
Finish
761-0002-3
761-0028-7
4.5 to 5.2mm
5.8 to 6.2mm
Outer terminal
Insulator
Brass
PT
Tin plating
Color: Dark gray
GT11-2S-5.2C
GT11-2S-6.0C
* The suitable terminals might differ depending on the internal structure of the cable.
Inner Terminals
Part Number
CL No.
Conductor Size (AWG)
Material
Brass
Finish
Packaging
#18 to 22
#24 to 28
G T 11-1822SC F
G T 11-2428SC F
761-0004-9
761-0020-5
8,000 pcs.
per reel
Tin plating
M Connectors
Outer terminals
Part Number
CL No.
Applicable Cable
Item
Material
Finish
GT11-2P-5.2C
GT11-2P-6.0C
761-0001-0
761-0027-4
4.5 to 5.2mm
5.8 to 6.2mm
Outer terminal
Insulator
Brass
PT
Tin plating
Color: Dark gray
* The suitable terminals might differ depending on the internal structure of the cable.
Inner Terminals
Part Number
CL No.
Conductor Size (AWG)
Material
Brass
Finish
Packaging
GT11-1822PCF
GT11-2428PCF
761-0003-6
761-0019-6
#18 to 22
#24 to 28
8,000 pcs.
per reel
Tin plating
78
For Double-Conductor coaxial cable
B
Shown with inserted retainer
F Connectors
Housing
Part Number
GT11-2S-HU
CL No.
Material
PBT
Color
761-0005-1
Light gray
M Connectors
Housing
B
Shown with inserted retainer
Part Number
GT11-2P-HU
CL No.
Material
PBT
Color
761-0006-4
Light gray
B
Shown with inserted retainer
BFully mated connector assemblies
Part Number
CL No.
Material
PBT
Color
GT11N-2PP-HU
761-0008-0
Light gray
79
M Connectors
BRecommended Board Mounting Pattern
Housing
For outer conductor
For inner conductor
パネル
Part Number
GT11-2S-HU
CL No.
Material
Finish
Color
PBT
Brass
PBT
----
Light gray
----
Dark gray
----
Tin plating
----
Tin plating
761-0005-1
Phosphor bronze
B
Recommended
B
Fully mated connector
assemblies
Housing (2-position Type)
Panel Cut-out
基板
BRecommended Board
Mounting Pattern
For outer conductor
For inner conductor
Part Number
CL No.
Material
Finish
Color
PBT
Brass
PBT
----
Light gray
----
Dark gray
----
パネル
Tin plating
----
Tin plating
GT11X-2/2P-DS
761-0022-0
Phosphor bronze
Housing (Straight Type)
BRecommended Board Mounting Pattern
BFully mated connector assemblies
Part Number
GT11-2P-DSA
CL No.
761-0038-0
80
Waterproof type For Double-Conductor coaxial cable
F Connectors
Housing
BFully mated connector assemblies
Part Number
CL No.
Material
PBT
GT11W-2P-HU
761-0023-3
M Connectors
Housing
Part Number
CL No.
Material
PBT
GT11W-2S-HU
761-0024-6
Retainer (used with GT11W-2S-HU and GT11W-2P-HU)
Part Number
GT11W-6.0R
CL No.
Applicable Cable
PBT
761-0025-9
Silicon rubber compound
81
Waterproof type For Double-Conductor coaxial cable
F Connectors
Housing
BShown with inserted retainer
Part Number
CL No.
Material
PBT
Color
GT11K-2/2S-HU 761-0039-3
Light gray
* Mates only with GT11KN-2/2PP-HU.
M Connectors
Housing
BShown with inserted retainer
Part Number
CL No.
Material
PBT
Color
GT11KN-2/2PP-HU 761-0040-2
Light gray
82
BTermination sequence
6Insert the internal terminals into the Outer terminals.
1Strip the cable.
The joined side of the crimp portion faces upward
(for both male and female).
Shield
Cable
2Cut the shield and expose the wire.
Wire
7Crimp the Outer terminal.
The shield must be visible.
3Cut back the shield above the sheath and wrap with
conductive tape.
Jig used: Outside tube caulking jig.
(Refer to Page 91 for detail.)
8Insert the terminal into the housing.
(Please insert until the terminal is stopped by the lance.)
4Strip the wire and form it.
Conductor
Jig used: Cable-forming strip jig
(Refer to Page 85 for detail.)
5Crimp the wire to the internal terminal.
1mm max.
9Mount the retainer to complete the task.
Jig used: Automatic crimping machine.
(Refer to Page 85 for detail.)
Refer to Page 84 for information
about the retainer mounting
method.
83
BRetainer Mounting Method
a. Insert so that the terminal
locking tab is inserted
between the top surface
of the terminal and the
housing.
b. Push in while changing
the angle of the retainer
until the front surface
comes to a stop.
c. Press the rear portion of
the retainer and snap it
into the locked position.
d. If locking is not complete,
press the rear portion of
the retainer again while
pulling it backward.
* Check that all locations are locked.
* Check that the bands are housed in all of the receiving areas.
84
BTermination Tools
User's manuals are available. Please ask your Hirose Electric account representative.
Cable-Forming Strip Jig (for 2-conductor cable)
Main Unit
Accessory (Electrical Box)
Specifications
Capacity
Remarks
Approximately 400 W x 500 D x 300 H Approximately 300 W x 250 D x 200 H
Mounting Dimensions
Weight
Approximately 40 kg
Approximately 5 kg
Power supply
Air pressure
Task time
AC100V (50/60Hz)
Part Number CT11-ST/AD
5-6Kgf/cm
Approximately 14 seconds
Automatic Crimping Machine (for 2-conductor and 8-conductor cable)
Specifications
Item
Capacity
Specification
1.5tons
Remarks
Stroke
30mm
Number of strokes
Weight
200spm (50Hz)
75kg
200spm (60Hz)
AC100V
Motor
0.2kW
Crimping speed
2000 to 4000 pcs. per day
Part Number CM-105
Cable-Forming Strip Jig (for 2-conductor cable)
Main Unit
Accessory (Electrical Box)
Specifications
Specification
Remarks
Mounting Dimensions Approximately 300 W x 400 D x 300 H Approximately 300 W x 250 D x 200 H
Weight
Approximately 25 kg
AC100V (50/60Hz)
5-6Kgf/cm
Approximately 5 kg
Power supply
Air pressure
Part Number CT11-CT/AD
* Crimp height setting tables are available for each cable type. Please contact your nearest Hirose Electric account representative.
Different cables will require different crimp height settings.
85
For 8-Conductor coaxial shielded cable
F Connectors
Inner Terminal
Part Number
GT11-1822SCF
GT11-2428SCF
CL No.
761-0004-9
761-0020-5
Conductor Size (AWG)
#24 to 28
Material
Phosphor bronze
Phosphor bronze
Finish
Tin plating
Tin plating
#24 to 28
Insulator
Part Number
GT11-8DS-2.8C
CL No.
761-0014-2
Material
PBT
Outer terminals
Part Number
GT11-8DS-5C
CL No.
761-0015-5
Material
Brass
Finish
Phosphor bronze
86
Shield Plate
Part Number
GT11-8DS-SB
CL No.
761-0016-8
Material
Brass
Finish
Tin plating
Housing
Part Number
GT11-8DS-HU
CL No.
761-0017-0
Material
PBT
Retainer (used with GT11-8DS-HU)
Part Number
GT11-8DS-6R
CL No.
761-0018-3
Material
PBT
87
M Connectors
Inner Terminals
Part Number
GT11-1822PCF
GT11-2428PCF
CL No.
761-0003-6
761-0019-6
Conductor Size (AWG)
#18 to 22
Material
Phosphor bronze
Phosphor bronze
Finish
Tin plating
Tin plating
#24 to 28
Insulator
Part Number
GT11-8DP-2.8C
CL No.
761-0009-2
Material
PBT
Outer terminals
Part Number
GT11-8DP-5C
CL No.
761-0010-1
Material
Brass
Finish
Phosphor bronze
88
Shield Plate
Part Number
GT11-8DP-SB
CL No.
761-0011-4
Material
Brass
Finish
Phosphor bronze
Housing
Part Number
GT11-8DP-HU
CL No.
761-0012-7
Material
PBT
Retainer (Used with GT11-8DS-HU)
Part Number
GT11-8DP-6R
CL No.
761-0013-0
Material
PBT
* Reserved for product expansion
89
Printed Circuit Board Type
B
Recommended Board Mounting Pattern
BFully mated connector assemblies
Board
Part Number
CL No.
Item
Housing
Material
PBT
Finish
Outer Terminal Phosphor bronze
Tin plating
Tin plating
GT11-8DP-2.8DS
761-0021-8
Insulator
Terminal
PBT
Brass
90
BTermination sequence
1Strip the Cable.
6Insert the inner terminals into the insulated case.
Inner terminal
Shield
Cable
2Cut the shield and expose
7Insert what was made in Step 6 into the Outer
the wire.
terminals.
Outer terminals
Wire
3Cut back the shield above
the sheath and wrap with
conductive tape.
8Insert the caulking shield cover onto the Outer
terminals.
Shield cover
Conductive tape
4Strip the wire.
9Insert what was made in Step 8 into the housing.
Housing
5Crimp the internal terminals.
!0
Internal terminals
Retainer
Completion
91
BTermination Tools
User's manuals are available. Please ask your Hirose Electric account representative.
Cable-Forming Strip Jig (for 2-conductor cable)
Main Unit
Accessory (Electrical Box)
Specifications
Capacity
Remarks
Approximately 400 W x 500 D x 300 H Approximately 300 W x 250 D x 200 H
Mounting Dimensions
Weight
Approximately 40 kg
Approximately 5 kg
Power supply
Air pressure
Task time
AC100V (50/60Hz)
5-6Kgf/cm
Approximately 14 seconds
Part Number CT11-ST/AD
Automatic Crimping Machine (for 2-conductor and 8-conductor cable)
Specifications
Item
Specification
Remarks
Capacity
1.5Ton
30mm
Stroke
Number of strokes
Weight
200spm (50Hz)
75kg
240spm (60Hz)
AC100V
Motor
0.2kW
Crimping speed
2000 to 4000 pcs. per day
Part Number CM-105
Cable-Forming Strip Jig (for 2-conductor cable)
Main Unit Accessory (Electrical Box)
Specifications
Specification
Remarks
Mounting Dimensions Approximately 300 W x 400 D x 300 H Approximately 300 W x 250 D x 200 H
Weight
Approximately 25 kg
AC100V (50/60Hz)
5-6Kgf/cm
Approximately 5 kg
Power supply
Air pressure
* Crimp height setting tables are available for each cable type. Please contact your
nearest Hirose Electric account representative.
Different cables will require different crimp height settings.
Part Number CT11-CT/AD
Outer terminal Caulking Jig (for 8-conductor cable)
Hand Press
Part Number GT11-8S/P-HP
92
相关型号：
©2020 ICPDF网 联系我们和版权申明