GT1-1S-2428/1.6C [HRS]
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines; 同轴电缆连接天线,传感器和通信干线型号: | GT1-1S-2428/1.6C |
厂家: | HRS |
描述: | Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines |
文件: | 总20页 (文件大小:500K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Coaxial cable connection of Antennas, Sensors, and Com m unication Trunk Lines
Term ination of coaxial cables in autom otive, m edical and instrum entation applications
utilizes a single m otion to crim p the center conductor, shield and outer Insulator.
GT1 Series
— Connectors for coaxial cables —
<
Several types and configurations: In-line, board m ounted, com binations of
>
coaxial cable with signal/power. Multi-position.
Features
Cost efficient term ination
Highly efficient and reliable single m otion crim p term ination allows high volum e production with sem i-
autom atic equipm ent.
Lock-release latching system
Shock / vibration resistant electrical connections
Verification of the full contact insertion
Excellent shielding effects.
Excellent High Frequency Perform ance
Refer to V.S.W.R. data on the following pages.
2003.6
BTest Data (Using Sem i-rigid Cable)
High Frequency Characteristics (V.S.W.R.)
Note: Data taken using fully assem blied and connected GT1-1S-HU and GT1-1P-DSA.
BDiagram of GT1 In-line Type Structure
Part Num ber
GT1-1P-HU
Part
Num ber Used
Material
PA(UL94V-0)
PBT(UL94V-0)
Brass
Finish
----
1
2
3
4
5
6
7
8
Housing
1
1
1
1
1
1
1
1
Insulator
----
GT1-1P-2428/1.6C
GT1-1S-HU
Crim p term inal
Outer term inal
Housing
Tin plating
Tin plating
----
Brass
PA(UL94V-0)
PBT(UL94V-0)
Phosphor bronze
Brass
Insulator
----
GT1-1S-2428/1.6C
Crim p term inal
Outer term inal
Tin plating
Tin plating
2
BTerm ination sequence
Coaxial Cable Term inal Finish Diagram
Strip Length
Part Num ber
GT1-1S-2428 /1.6C
GT1-1P-2428 /1.6C
GT1-1S-30 /1.6C
GT1-1P-30 /1.6C
CL No.
L1
L2
6
L3
Part Num ber
GT1-1S-30 /2.9C
GT1-1P-30 /2.9C
GT1-1S-2428 /F5C
GT1-1P-2428 /F5C
GT1-1S-30 /F5C
GT1-1P-30 /F5C
CL No.
L1
L2
L3
751-0001-3
751-0002-6
751-0029-2
751-0030-1
751-0015-8
751-0014-5
751-0032-7
751-0031-4
751-0033-0
751-0034-2
751-0037-0
751-0038-3
3.8
10.5
4.9
6.8
11.3
GT1-1S-2022 /2.9C
GT1-1P-2022 /2.9C
4.9
6.8
11.3
1 Crim p the cable to the term inal.
2 Insert the term inal in the housing until is fully locked.
3 Com pletion
3
Term inals for coaxial shielded cable
F Connector Term inals
Indication of
Conductor Size (AWG)
Conductor Size
(AWG)
Inner Insulator
Diam eter
Outer
Part Num ber
CL No.
Packaging
1,200
Diam eter
GT1-1S-2428 /1.6C 751-0001-3 #24 to 28 or equivalent
GT1-1S-30 /1.6C 751-0029-2 #30 or equivalent
GT1-1S-2022 /2.9C 751-0015-8 #20 to 22 or equivalent
GT1-1S-30 /2.9C 751-0032-7 #30 or equivalent
GT1-1S-2428 /F5C 751-0033-0 #24 to 28 or equivalent
GT1-1S-30 /F5C 751-0037-0 #30 or equivalent
GT1-1S-2428 /F4C 751-0046-1 #24 to 28 or equivalent
1.5 to 2.0m m 2.6 to 3.4m m
2.8 to 3.5m m
Item
Material
PBT
Finish
*
*
4.6 to 5.0m m
2.5 to 3.5m m
0,800
Insulator
Color: Dark gray
Tin plating
Tin plating
Crim p term inal
Outer term inal
Brass
Brass
4.0m m
Note: Products m arked with an asterisk (*) indicate polyethylene foam insulation.
M Connector Term inals
Indication of
Conductor Size (AWG)
Conductor Size
(AWG)
Inner Insulator
Diam eter
Outer
Part Num ber
CL No.
Packaging
0,800
Diam eter
GT1-1P-2428 /1.6C 751-0002-6 #24 to 28 or equivalent
GT1-1P-30 /1.6C 751-0030-1 #30 or equivalent
GT1-1P-2022 /2.9C 751-0014-5 #20 to 22 or equivalent
GT1-1P-30 /2.9C 751-0031-4 #30 or equivalent
GT1-1P-2428 /F5C 751-0034-2 #24 to 28 or equivalent
GT1-1P-30 /F5C 751-0038-3 #30 or equivalent
GT1-1P-2428 /F4C 751-0047-4 #24 to 28 or equivalent
1.5 to 2.0m m 2.6 to 3.4m m
2.8 to 3.5m m
Item
Material
PBT
Finish
*
*
4.6 to 5.0m m
2.5 to 3.5m m
0,600
Insulator
Color: Dark gray
Tin plating
Tin plating
Crim p term inal
Outer term inal
Brass
Brass
4.0m m
Note: Products m arked with an asterisk (*) indicate polyethylene foam insulation.
4
For Single-Conductor coaxial shielded cable
F Connectors
Housing
Part Num ber
GT1-1S-HU
CL No.
Material
PA
Color
751-0003-9
Light gray
M Connectors
Housing
Part Num ber
GT1-1P-HU
CL No.
751-0004-1
Material
PA
Color
Light gray
Panel Housing
Part Num ber
GT1-1PP-HU
CL No.
Item
Material
PA
Finish
Color
Light gray
----
Housing
751-0007-0 Ground plate
Press fitting nut
----
Brass
Brass
Tin plating
Nickel
----
5
Printed Circuit Type (Right angle)
BRecom m ended Board Mounting Pattern
For outer conductor
For inner conductor
Part Num ber
GT1-1P-DS
CL No.
Item
Material
PBT
Finish
Color
Housing
----
----
Light gray
Insulator
PBT
Dark gray
751-0006-7
0.64X1.1 Term inal
Outer term inal
Ground term inal
Brass
Tin plating
Tin plating
----
----
----
----
Brass
Stainless
Use m ounting screws of M3 with nom inal diam eter 3L-6 (for a panel thickness of 0.16m m )
Printed Circuit Type (Straight Dip Type)
BRecom m ended Board Mounting Pattern
For outer conductor
For inner conductor
Part Num ber
GT1-1P-DSA
CL No.
Item
Material
PBT
Finish
----
Color
Housing
Light gray
Dark gray
----
Insulator
PBT
----
751-0005-4
0.64X1.1 Term inal
Outer term inal
Brass
Brass
Tin plating
Tin plating
----
Use m ounting screws of M3 with nom inal diam eter 3L-6 (for a panel thickness of 0.16m m )
6
For Single-Conductor coaxial shielded cable
F Connectors
Housing (Integrated retainer type)
BShow n w ith inserted retainer
Part Num ber
GT1K-1S-HU
CL No.
Material
PBT
Color
751-0016-0
Light gray
Note: Mates only with GT1K-1P-DS and GT1K-1PA-DS.
* Refer to Page 14 for use of the GT1K-1P-HU retainer.
M Connectors
B
Recom m ended Board
Mounting Pattern
Printed Circuit Board Type
(Right-angle Dip Top Lock Type)
For outer conductor
For inner conductor
Part Num ber
GT1K-1P-DS
CL No.
Item
Material
PBT
Finish
----
Color
Light gray
Dark gray
----
Housing
Insulator
0.64X1.1 Term inal
Outer term inal
Cover
PBT
----
751-0017-3
Brass
Tin plating
Tin plating
Nickel
Brass
----
Stainless
----
Note 1: Mates only with GT1K-1S-HU.
Note 2: Use m ounting screws of M3 with nom inal diam eter 3L-6 (for a panel thickness of 0.16m m )
Printed Circuit Board Type
(Right-angle Dip Side Lock Type)
BRecom m ended Board
Mounting Pattern
For inner conductor
For outer conductor
Part Num ber
GT1K-1PA-DS
CL No.
Item
Material
PBT
Finish
----
Color
Light gray
Dark gray
----
Housing
Insulator
PBT
----
751-0035-5
0.64X1.1 Term inal
Outer term inal
Brass
Brass
Tin plating
Tin plating
----
Note 1: Mates only with GT1K-1S-HU.
Note 2: Use m ounting screws of M3 with nom inal diam eter 3L-6 (for a panel thickness of 0.16m m )
Panel
7
BMethod of Using the GT1K-1S Retainer
a. Insert so that the term inal
lo ckin g ta b is in s e rte d
between the top surface
o f th e te rm in a l a n d th e
housing.
b. Pu s h in w h ile ch a n g in g
the angle of the retainer
u n til th e fro n t s u rfa ce
com es to a stop.
c. Press the rear portion of
th e re ta in e r a n d s n a p it
into the locked position.
d. If locking is not com plete,
press the rear portion of
th e re ta in e r a g a in w h ile
pulling it backward.
* Check that all locations are locked.
8
Tw o-position type-Each Single-Conductor coaxial Cable
F Connectors
Housing
Part Num ber
CL Num ber
Material
PBT
Color
Light gray
Orange
Blue
GT1-2S-HU(20) 751-0011-7-20
GT1-2S-HU(20) 751-0011-7-20
GT1-2S-HU(21) 751-0011-7-21
Note: Retainer is optional.
Retainer (Used w ith GT1-2S-HU)
A Configuration
Show n w ith inserted retainer
Part Num ber
B
Cable Dia.
A Configuration Part Num ber
CL No.
Material
PBT
Color
o
o
/ A / B
White
o
/ 3
o
/ 3
GT1-2S-33R 751-0045-9
GT1-2S-53R 751-0043-3
GT1-2S-55R 751-0044-6
Dark gray
Light blue
o
/ 5
o
/ 3
o
/ 5
o
/ 5
Note 1: This item should be m ounted to the GT1-2PP-HU housing after the insertion of term inals.
Note 2: Retainer is optional.
BGT1-2S-HU
Show n w ith tem porarily inserted retainer
Retainer (used w ith GT1-2S-HU and GT1-2PP-HU)
BGT1-2PP-HU
Show n w ith tem porarily inserted retainer
Part Num ber
GT1-2P/S-R
CL Num ber
751-0013-2
Material
PBT
Color
Dark gray
Note: Mount this item after provisional insertion into the housing, or after term inal insertion.
9
M Connectors
Housing
Mounting bracket
attachm ent side
BRecom m ended Mounting Bracket
Dim ensions (T=1.5m m )
Ground term inal
Tin plating
Part Num ber
CL No.
Color
Light gray
Light gray
Orange
Blue
Rem arks
GT1-2PP-HU(10) 751-0010-4-20
GT1-2PP-HU(10) 751-0010-4-10
GT1-2PP-HU(20) 751-0010-4-20
GT1-2PP-HU(21) 751-0010-4-21
GT1-2PP-HU(40) 751-0010-4-40
GT1-2PP-HU(41) 751-0010-4-41
Note: Retainer is optional.
With ground term inal
Without ground term inal
With ground term inal
With ground term inal
Without ground term inal
Without ground term inal
Item
Material
PBT
Finish
Color: Light gray
Color: Orange
Color: Blue
Housing
Orange
Blue
Ground term inal
Brass
Tin plating
Retainers (Used w ith GT1-2PP-HU)
A Configuration
Part Num ber
B
Show n w ith inserted retainer
Bracket Mounting portion
Cable Dia.
A Configuration Part Num ber
CL No.
Color
o
o
/ A / B
White
o
o
/ 3
GT1-2PP-33R 751-0042-0
GT1-2PP-53R 751-0040-5
GT1-2PP-55R 751-0041-8
/ 3
Material
PBT
Color
White
Dark gray
Light blue
o
/ 5
o
/ 5
Dark gray
Light blue
o
/ 5
o
/ 3
Note 1: This item should be m ounted to the GT1-2PP-HU housing after the insertion of term inals.
Note 2: Retainer is optional.
1 0
Pow er Supply Term inals
F Connector Term inals
Conductor Size Inner Insulator
Part Num ber
GT7-2022SCF
CL No.
Dim ension A Packaging Material
5,000
Finish
(AWG)
Diam eter
757-0001-1
#20 to 22
1.4 to 2.4m m
19
Copper alloy Tin plating
GT7A-2022SCF 757-0003-7
#20 to 22
2.6 to 3.1m m
3,000
Note 1: Sold by the reel. (See above table for num ber of Packaging.)
Note 2: This com ponent is used only with applicable HRS housings.
M Connector Term inals
Conductor Size Inner Insulator
Part Num ber
GT7-2022SCF
CL No.
Dim ension A Packaging Material
5,000
Finish
(AWG)
Diam eter
757-0001-1
#20 to 22
1.4 to 2.4m m
19
Copper alloy Tin plating
GT7A-2022SCF 757-0003-7
#20 to 22
2.6 to 3.1m m
3,000
Conductor Size Inner Insulator
Part Num ber
CL No.
Packaging Material
3,000
Finish
(AWG)
Diam eter
*
Reserved for
GT7-1618PCF
GT7-2022PCF
GT7A-2022PCF
#16 to 18
1.8 to 2.7m m
product expansion
757-0002-4
757-0004-0
#20 to 22
#20 to 22
1.4 to 2.4m m
2.6 to 3.1m m
5,000
3,000
Brass
Tin plating
Note 1: Sold by the reel. (See above table for num ber of Packaging.)
Note 2: This com ponent is used only with applicable HRS housings.
1 1
Com bination Type (One Single-Conductor Coaxial Cables + One Pow er contact)
F Connectors
Housing
Part Num ber
GT1-1/1S-HU
CL No.
Material
PBT
Color
751-0026-4
Light gray
Note: Retainer is optional.
Retainer (Used w ith GT1-1/ 1S-HU)
Part Num ber
GT1-1/1S-R
CL Num ber
751-0028-0
Material
PBT
Color
Dark gray
Note: Mount this item after provisional insertion into the housing, or after term inal insertion.
1 2
M Connectors
Housing
Mounting bracket
attachm ent side
B
Recom m ended Mounting Bracket Dim ensions (T=1.5m m )
Tin plating
Mounting bracket
attachm ent side
Part Num ber
CL No.
Rem arks
GT1-1 /1PP-HU(00) 751-0025-1-10
GT1-1 /1PP-HU(10) 751-0025-1-10
GT1-1 /1PP-HU(11) 751-0025-1-11
1.5m m
With ground term inal
Without ground term inal
With ground term inal
Item
Housing
Material
PBT
Finish
1.5m m
Light gray
Tin plating
1.0m m
Ground term inal Phosphor bronze
Note: Used with separate retainer (GT1-1/1PP-R).
Retainer (exclusively for GT1-1/ 1PP-HU)
Part Num ber
GT1-1/1PP-R
CL Num ber
751-0027-7
Material
PBT
Color
Dark gray
Note: Mount this item after provisional insertion into the housing, or after term inal insertion.
1 3
Com bination Type (Tw o Single-Conductor Coaxial Cables + One Pow er contact)
F Connectors
Housing
Part Num ber
GT1-2/1S-HU
CL No.
Material
PBT
Color
751-0019-9
Light gray
Note1: Mates only with GT1-2/1PP-DS and GT1-2/1PP-HU.
Note2: Used with separate retainer (GT1-2/1S-R).
Retainer (used w ith GT1-2S-HU and GT1-2PP-HU)
Part Num ber
GT1-2/1S-R
CL No.
Material
PBT
Color
751-0021-0
Dark gray
Note: Mount this item after provisional insertion into the housing, or after term inal insertion.
1 4
M Connectors
Housing
B
Recom m ended Mounting Bracket
Dim ensions (T=1.5m m )
Mounting bracket
attachm ent side
Tin plating
Ground term inal
Rem arks
Mounting bracket
attachm ent side
Part Num ber
CL No.
GT1-2/1PP-HU(00) 751-0018-6-10
GT1-2/1PP-HU(10) 751-0018-6-10
GT1-2/1PP-HU(11) 751-0018-6-11
Note1: Mates only with GT1-2/1S-HU.
1.5m m
With ground term inal
Item
Material
PBT
Finish
1.5m m
Without ground term inal
With ground term inal
Housing
Light gray
Tin plating
1.0m m
Ground term inal Phosphor bronze
Note2: Used with separate retainer (GT1-2/1PP-R).
Retainer (used w ith GT1-2/ 1PP-HU)
Part Num ber
CL Num ber
Material
PBT
Color
GT1-2/1PP-R(22) 751-0020-8-22
Dark gray
Note: Mount this item after provisional insertion into the housing, or after term inal insertion.
B
Recom m ended Board
Mounting Pattern
B
Recom m ended Panel
Printed Circuit Board Type
Cut-out
Ground term inal
For inner conductor
Ground term inal
Ground term inal
For outer conductor
Board
Panel
Part Num ber
GT1-2/1PP-DS
CL No.
Part
Material
Finish
----
Color
Housing
Ground term inal
Ground plate
PBT
Phosphor bronze
Brass
Light gray
Tin plating
Tin plating
Tin plating
Tin plating
----
----
----
751-0022-3
Tub term inal for DS 070
0.64X1.1 Term inal
Insulator
Brass
----
----
Brass
PBT
Dark gray
----
Outer term inal
Brass
Tin plating
Note1: Mates only with GT1-2/1PP-DS and GT1-2/1PP-HU.
Note 2: Use m ounting screws of M3 with nom inal diam eter 3L-6 (for a panel thickness of 1.6m m )
1 5
Products Listed Below are of the Com bination Type (Two Term inals for Use with Single-Conductor Shielded
Cable + One Power Supply Term inal) with Key Positions that Differ from the Products Listed on Previous Pages
F Connectors
Housing
Part Num ber
CL No.
Material
PBT
Color
Light gray
Blue
GT1-2/1S-HU(A)(21)
GT1-2/1S-HU(A)(21)
751-0024-9-21
751-0024-9-21
PBT
Note1: Mates only with GT1-2/1P-DS.
Note2: Used with separate retainer.
M Connector
Printed Circuit Board Type
B
Recom m ended Board
Mounting Pattern
B
Recom m ended Panel
Cut-out
Board
Ground term inal
For inner conductor
For outer conductor
Panel
Item
Material
PBT
Finish
Color
Light gray
Blue
----
----
Housing
0.64X1.1 Term inal
Insulator
Brass
PBT
Tin plating
----
----
Part Num ber
CL No.
Color
Light gray
Blue
Dark gray
----
GT1-2/1P-DS(21) 751-0023-6-21
GT1-2/1P-DS(21) 751-0023-6-21
Note1: Mates only with GT1-2/1S-HU(A).
Outer term inal
Brass
Brass
Tin plating
Tin plating
Tub term inal for DS 070
----
Note 2: Use m ounting screws of M3 with nom inal diam eter 3L-6 (for a panel thickness of 1.6m m )
1 6
BMating, Cross-Sectional View
Exam ples of Printed Circuit Board Type and Cable Type
Mating, Top View
Cross Section AA
G T 1-2/1P-D S+G T 1-2/1S-H U(A )
Part Num ber
Part
Num ber Used Material
Finish
UL94V-0
UL94V-0
Tin plating
Tin plating
UL94V-0
UL94V-0
UL94V-0
Housing
Insulator
1
2
2
2
1
1
2
2
2
PBT
PBT
1
2
3
4
5
6
7
8
9
GT1-2/1P-DS(A)
0.64 X 1.1 term inal
Outer term inal
Housing
Brass
Brass
PBT
GT1-2/1S-HU(A)
GT1-2/1S-HU(A)
Retainer
PBT
Insulator
PBT
GT1-1S-2428/1.6C Crim p term inal
Outer term inal
Phosphor bronze Tin plating
Brass
Tin plating
Exam ple of Cable-to-Cable Type
The coupled, cross-sectional view of the GT7 term inals of the GT1-2/1 Series appears below.
Cross Section AA
Mating, Top View
Part Num ber
GT1-2/1PP-HU
GT1-2/1PP-R
GT7-2022PCF
GT1-2/1S-HU
GT1-2/1S-R
Currently, the GT7 Series term inals are used for the power supply of the GT1 Series com bination type.
1
Part Num ber
GT1-1/1S-HU
GT1-2/1S-HU
GT1-1/1PP-HU
GT1-2/1PP-HU
Term inal
2
3
4
5
6
GT7-2022SCF、GT7A-2022SCF
GT7-2022PCF、GT7A-2022PCF
GT7-2022SCF
1 7
Accessories
Brackets (for M Connector Housing)
Part Num ber
GT-BK(01)
GT-BK(01)
CL No.
Material
SPCC
Finish
751-0039-6-22
751-0039-6-01
Tin plating
Zinc plating
Note 1: This product can be attached to GT1-1PP-HU, GT1-1/1PP-HU, and GT1-2/1PP-HU.
Note 2: Please use the tin plated item when m aking a ground connection.
F Term inal Shield Cover
Mounted Condition Installed
Part Num ber
CL No.
Item
Material
SPCC
Finish
Top Shield Cover
Bottom Shield Cover
Tin plating
Zinc plating
GT1-1S-1.6CSB
751-0009-5
Note: This product cannot be used with GT1K-1S-HU.
M Term inal Shield Plate
Mounted Condition Installed
Part Num ber
CL No.
Item
Material
Brass
Finish
Top Shield Cover
Bottom Shield Cover
GT1-1P-1.6CSB
751-0008-2
Tin plating
Note: The product norm ally has sufficient perform ance without using the shield plate; however, when used in especially high frequency bands (e.g.,
1 GHz and higher), use of the shield plate is recom m ended so that even higher shielding effectiveness m ay be obtained.
1 8
BTerm ination Tools
User's m anuals are available. Please ask your Hirose Electric account representative.
Autom atic Crim ping Machine
Specifications
Item
Specification
1.5ton
Rem arks
Specification
Stroke Length
Num ber of strokes
Weight
30m m
200spm (50Hz)
75kg
240spm (60Hz)
AC100V
Motor
0.2kW
Crim ping speed
2000 to 4000 per day
Part Num ber CM-105
Hand Tool
Hand Press
*Crim p height setting tables are available for each cable type. Please contact your nearest Hirose Electric account representative. Different cables will
require different crim p height settings.
1 9
BTerm inal Extraction Tool
1) For one lance
1 Insert the extraction tool from the coupling end.
2 Push the lance upward and pull out the term inal.
Part Num ber
GT-PO(A)
CL No.
Used with connectors
GT1K-1S-HU GT1-2S-HU GT1-2PP-HU GT1-1/1S-HU
GT1-1/1PP-HU GT1-2/1S-HU GT1-2/1PP-HU GT1-2/1S-HU(A)
780-0006-2
2) For tw o lances
1 Insert the extraction tool from the coupling end.
2 Push and separate both lances and pull out the term inal.
Part Num ber
GT1-C-PO
CL No.
Used with connectors
902-5020-1
GT1-1S-HU GT1-1P-HU GT1-1PP-HU
2 0
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明