FH26-45S-0.3SHW(15) [HRS]
Card Edge Connector;
| 型号： | FH26-45S-0.3SHW(15) |
| 厂家： | 
HRS |
| 描述： | Card Edge Connector PC 连接器 |
| 文件： | 总12页 (文件大小：336K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
0.3mm Pitch, 1.0mm Height FPC Connector
FH26 Series
Space saving(51 pos. shown)
●
3.2mm
Metal fittings do no protrude
outside of the connector body
■Features
Can be mounted over conductive traces.
●
1. Low-profile 0.3mm pitch FPC connector
Ultra-thin design, 1.0mm height, 3.2mm width all add up
to a compact, space saving form factor.
*30% reduction in PCB footprint
*40% reduction in weight
(Compared to our 0.3mm pitch FH23 Series 51 position connector.)
2. Easy PCB Mounting
No exposed contacts on the bottom
of the connector
The leads are double sided and have a 0.6mm mounting
lead pitch to simplify mounting.
3. Fully molded structure aids PCB layout
The bottom of this connector is enclosed by a fully molded
structure that protects the contacts and removes any
restrictions from PCB patterning and design.
Operation
●
(1) Actuator open
(2) Insert FPC
4. Rotating one-touch ZIF mechanism
The one-touch rotating ZIF mechanism is easier to operate and
works with a light force, and a clear tactile click is delivered upon
the successful completion of the mating process.
Actuator
q
5. Easy FPC insertion
The metal FPC insertion guides helps to make this the
FPC insertion process easier.
w
6. FPC. Accepts standard 0.2mm thick FPC
This connector accepts standard 0.2mm thick FPC. (The
proper FPC stiffener thickness will prevent FPC
deformation and ease insertion and mating.)
FPC
7. Supports automatic pick-n-place mounting
Offered in tape and reel packaging that is compatible with
automatic machine mounting. (5,000 pieces per reel)
(3) Close the actuator
(4) FPC connected
8. Halogen-free
All materials and substances used to produce this product
comply with Halogen-free standards.
e
* Defined according to IEC61249-2-21
Br : 900ppm max, Cl : 900ppm max, Br+Cl : 1,500ppm max.
9. Multiple packing options
The standard packaging is 5,000 pieces per reel, but it is
also offered in a 500 piece reel. (The outer diameter of the
reel will be Ø180mm in this case.)
r
1
2017.5③
FH26 Series●0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
■Product Specifications
Operating temperature range -55 ç to +85ç (Note 2)
Storage temperature range -10ç to +50ç (Note 3)
Current rating 0.2A DC (Note 1)
Voltage rating 30V AC
Rating
Operating humidity range
Relative humidity 90% max.
(No condensation)
Storage humidity range
Relative humidity 90%
max.
Thickness : = 0.2 0.03mm gold plated
Specification
Recommended FPC :
Item
Conditions
1. Insulation resistance
2. Withstanding voltage
100V DC
50Mø min.
90V AC /1 minute
1mA
No flashover or insulation breakdown.
100mø max.
* Including FPC conductor resistance
3. Contact resistance
4. Durability
(Insertion/ withdrawal)
Contact resistance : 100mø max.
No damage, cracks, or parts dislocation.
10 cycles
No electrical discontinuity of 1μs or more.
Contact resistance : 100mø max.
No damage, cracks, or parts dislocation.
Frequency : 10 to 55 Hz, single amplitude of 0.75mm, 10 cycles,
3 directions.
5. Vibration
6. Shock
No electrical discontinuity of 1μs. min.
Contact resistance : 100mø max.
No damage, cracks, or parts dislocation.
2
Acceleration of 981 m/s , 6 ms duration, sine half-wave waveform,
3 cycles in each of the 3 axis
Contact resistance : 100mø max.
Insulation resistance : 50Mø min.
No affect on appearance or performance.
7. Humidity
(Steady state)
96 hours at temperature of 40 2ç and humidity of 90% to 95%.
Temperature : -55 ç/+15ç to +35ç/+85ç/+15ç to +35ç
Time : 30 / 2 to 3 / 30 / 2 to 3 (Minutes)
5 cycles
Contact resistance : 100mø max.
Insulation resistance : 50Mø min.
No damage, cracks, or parts looseness.
8. Temperature cycle
No deformation of components affecting
performance.
Reflow : At the recommended temperature profile
Manual soldering: 350ç +/-10ç for 5 1 seconds
9. Resistance to soldering heat
Note 1 : When passing the current through all of the contacts, use 70% of the rated current.
Note 2 : Includes temperature rise caused by current flow.
Note 3 : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating
Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage,
shipment or during transportation.
■Materials / Finish
Part
Material
LCP
Finish
Color : Black
Remarks
UL94V-0
UL94HB
Insulator
PA
FH26W series : Light brown
Gold plating
---------------
---------------
Contacts
Phosphor bronze
Metalfittings
Pure tin reflow plating
■Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
( )
FH 26W - 51S - 0.3 SHW 05
1
2
3
4
5
6
1
2
3
5
6
Series name : FH
Termination type SHW : SMT horizontal staggered mounting type
Specifications
Series No. : 26W
Number of Contacts : 13 to 71
(60)…Gold plating with nickel barrier, 5,000pcs/reel
(97)…Gold plating with nickel barrier, 500pcs/reel
4 Contact pitch : 0.3mm
2
FH26 Series●0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
■Connector Dimensions
A
B
0.3
(0.12)
0.6
Number of contacts indicator
C
0.6
(0.12)
0.5
0.3
3.2
(D : FPC insertion slot dimension)
E
1
0.1
1
0.1
1
2
3
4
Notes
The coplanarity of each terminal lead within specified dimension is 0.1mm Max.
Packaged on tape and reel only. Check packaging specification.
Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
After reflow, the terminal plating may change color, however this does not represent a quality issue.
All dimensions : mm
Part No.
HRS No.
No. of Contacts
A
B
C
D
E
FH26W-13S-0.3SHW(**)
FH26W-15S-0.3SHW(**)
FH26W-17S-0.3SHW(**)
FH26W-19S-0.3SHW(**)
FH26W-21S-0.3SHW(**)
FH26W-23S-0.3SHW(**)
FH26W-25S-0.3SHW(**)
FH26W-27S-0.3SHW(**)
FH26W-29S-0.3SHW(**)
FH26W-31S-0.3SHW(**)
FH26W-33S-0.3SHW(**)
FH26W-35S-0.3SHW(**)
FH26W-37S-0.3SHW(**)
FH26W-39S-0.3SHW(**)
FH26W-41S-0.3SHW(**)
FH26W-45S-0.3SHW(**)
FH26W-51S-0.3SHW(**)
FH26W-57S-0.3SHW(**)
FH26W-61S-0.3SHW(**)
FH26W-71S-0.3SHW(**)
580-2401-1 **
580-2402-4 **
580-2403-7 **
580-2437-9 **
580-2404-0 **
580-2405-2 **
580-2406-5 **
580-2400-9 **
580-2407-8 **
580-2408-0 **
580-2409-3 **
580-2410-2 **
580-2411-5 **
580-2412-8 **
580-2413-0 **
580-2414-3 **
580-2415-6 **
580-2417-1 **
580-2418-4 **
580-2419-7 **
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
45
51
57
61
71
5.4
3
3.6
4.23
4.9
6.0
3.6
4.2
4.83
5.5
6.6
4.2
4.8
5.43
6.1
7.2
4.8
5.4
6.03
6.7
7.8
5.4
6.0
6.63
7.3
8.4
6.0
6.6
7.23
7.9
9.0
6.6
7.2
7.83
8.5
9.6
7.2
7.8
8.43
9.1
10.2
10.8
11.4
12.0
12.6
13.2
13.8
15.0
16.8
18.6
19.8
22.8
7.8
8.4
9.03
9.7
8.4
9.0
9.63
10.3
10.9
11.5
12.1
12.7
13.3
14.5
16.3
18.1
19.3
22.3
9.0
9.6
10.23
10.83
11.43
12.03
12.63
13.83
15.63
17.43
18.63
21.63
9.6
10.2
10.8
11.4
12.0
13.2
15.0
16.8
18.0
21.0
10.2
10.8
11.4
12.6
14.4
16.2
17.4
20.4
Note 1 : Embossed tape reel packaging (5,000pcs/reel, 500pcs/reel). Order by number of reels.
3
FH26 Series●0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
BRecommended PCB mounting pattern and metal mask dimensions
Recommended metal mask thickness : t=0.1
B
0.05
0.3 0.03
(0.23 : Metal mask)
0.6 0.05
Outline of
the connector
0.3 0.05
0.6 0.05
(0.3 : Metal mask)
0.4 0.05
0.3 0.03
(0.23 : Metal mask)
C
0.05
0.5 0.05
Detail H
BRecommended FPC Dimensions
(Lead plated 0.1 MAX)
F
0.05
0.3 0.07
C
0.03
0.3 0.07
(0.15)
0.6 0.02
+0.04
-0.03
0.3
0.3 0.02
H
0.2 0.03
B
A
+0.04
-0.03
0.3
0.1 0.02
(0.2)
(0.2)
(0.05)
(0.15)
(0.07)
0.6 0.07
B
0.03
0.6 0.07
1
Dimention M must be 0.5mm minimum when the stiffener is shorter than 3.5 min.
All dimensions : mm
Part No.
HRS No.
No. of Contacts
B
C
F
FH26W-13S-0.3SHW(**)
FH26W-15S-0.3SHW(**)
FH26W-17S-0.3SHW(**)
FH26W-19S-0.3SHW(**)
FH26W-21S-0.3SHW(**)
FH26W-23S-0.3SHW(**)
FH26W-25S-0.3SHW(**)
FH26W-27S-0.3SHW(**)
FH26W-29S-0.3SHW(**)
FH26W-31S-0.3SHW(**)
FH26W-33S-0.3SHW(**)
FH26W-35S-0.3SHW(**)
FH26W-37S-0.3SHW(**)
FH26W-39S-0.3SHW(**)
FH26W-41S-0.3SHW(**)
FH26W-45S-0.3SHW(**)
FH26W-51S-0.3SHW(**)
FH26W-57S-0.3SHW(**)
FH26W-61S-0.3SHW(**)
FH26W-71S-0.3SHW(**)
580-2401-1 **
580-2402-4 **
580-2403-7 **
580-2437-9 **
580-2404-0 **
580-2405-2 **
580-2406-5 **
580-2400-9 **
580-2407-8 **
580-2408-0 **
580-2409-3 **
580-2410-2 **
580-2411-5 **
580-2412-8 **
580-2413-0 **
580-2414-3 **
580-2415-6 **
580-2417-1 **
580-2418-4 **
580-2419-7 **
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
45
51
57
61
71
3.0
3.6
4.2
3.6
4.2
4.8
4.2
4.8
5.4
4.8
5.4
6.0
5.4
6.0
6.6
6.0
6.6
7.2
6.6
7.2
7.8
7.2
7.8
8.4
7.8
8.4
9.0
8.4
9.0
9.6
9.0
9.6
10.2
10.8
11.4
12.0
12.6
13.8
15.6
17.4
18.6
21.6
9.6
10.2
10.8
11.4
12.0
13.2
15.0
16.8
18.0
21.0
10.2
10.8
11.4
12.6
14.4
16.2
17.4
20.4
4
FH26 Series●0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
BRecommended FPC Construction
Contact FPC manufacturer for specific details.
●
1. Using Single-sided FPC
Material Name
Covering film layer.
Cover adhesive
Material
Polyimide 1 mil thick.
Thickness (μm)
25
25
Connecting side
1μm to 5μm Nickel underplated
0.2μm Gold plated
Surface treatment
3
Copper foil
Base adhesive
Base film
Cu
Thermosetting adhesive
Polyimide 1 mil thick
1oz
35
25
25
Reinforcement material adhesive Thermosetting adhesive
40
Stiffener
Polyimide
Total
3 mil thick
75
203
Back side
2. Using Double-sided FPC
Material Name
Material
Polyimide 1 mil thick
Thickness (μm)
Covering layer film
Cover adhesive
25
25
Connecting side
1μm to 5μm Nickel underplated
0.2μm Gold plated
Surface treatment
3
Through-hole copper
Copper foil
Cu
15
18
18
25
18
18
25
25
25
25
197
Cu
Thermosetting adhesive
Polyimide 1 mil thick
Thermosetting adhesive
Cu 1/2oz
Thermosetting adhesive
Polyimide 1 mil thick
1/2oz
Base adhesive
Base film
Base adhesive
Copper foil
Cover adhesive
Covering layer film
Reinforcement material adhesive Thermosetting adhesive
Stiffener
Polyimide
Total
1 mil thick
Back side
To prevent release of the FPC due to it's bending, use of double sided FPC with copper foil on the back side is NOT RECOMMENDED.
●
3. Precautions
1. This specification is a recommendation for the construction of the FH26 Series FPC (t=0.2 0.03).
2. For details about the construction, please contact the FPC manufacturers.
5
FH26 Series●0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
BPackaging Specification
Embossed Carrier Tape Dimensions
●
(Tape width of 24mm max.)
Embossed Carrier Tape Dimensions
●
(Tape width of 32mm min.)
+0.1
0
(1.6)
(0.3)
+0.1
0
Ø1.5
8
0.1
4
0.1 2 0.15
(1.6)
(0.3)
Ø1.5
(3.05)
(4.55)
Flat surface,
for placement with
automatic equipment
Unreeling direction
(3.05)
(4.55)
(1.25)
Unreeling direction
1.5+0.1
0
Flat surface,
for placement with
automatic equipment
(1.25)
Reel Dimensions
●
Unreeling direction
(L : INSIDE)
(M : OUTSIDE)
End section
Mounting section
Lead section (400mm min.)
Connectors
Embossed carrier tape
Blank section
(10 pockets min.)
Blank section
(10 pockets min.)
Top cover tape
6
FH26 Series●0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
All dimensions : mm
Part No.
HRS No.
No. of Contacts
G
H
J
K
L
M
－－
－－
－－
－－
－－
－－
－－
－－
－－
－－
－－
－－
－－
－－
－－
－－
－－
FH26W-13S-0.3SHW(**)
FH26W-15S-0.3SHW(**)
FH26W-17S-0.3SHW(**)
FH26W-19S-0.3SHW(**)
FH26W-21S-0.3SHW(**)
FH26W-23S-0.3SHW(**)
FH26W-25S-0.3SHW(**)
FH26W-27S-0.3SHW(**)
FH26W-29S-0.3SHW(**)
FH26W-31S-0.3SHW(**)
FH26W-33S-0.3SHW(**)
FH26W-35S-0.3SHW(**)
FH26W-37S-0.3SHW(**)
FH26W-39S-0.3SHW(**)
FH26W-41S-0.3SHW(**)
FH26W-45S-0.3SHW(**)
FH26W-51S-0.3SHW(**)
FH26W-57S-0.3SHW(**)
FH26W-61S-0.3SHW(**)
FH26W-71S-0.3SHW(**)
580-2401-1 **
580-2402-4 **
580-2403-7 **
580-2437-9 **
580-2404-0 **
580-2405-2 **
580-2406-5 **
580-2400-9 **
580-2407-8 **
580-2408-0 **
580-2409-3 **
580-2410-2 **
580-2411-5 **
580-2412-8 **
580-2413-0 **
580-2414-3 **
580-2415-6 **
580-2417-1 **
580-2418-4 **
580-2419-7 **
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
45
51
57
61
71
16
16
16
16
16
16
16
16
24
24
24
24
24
24
24
24
24
32
32
44
7.5
5.6
17.4
17.4
17.4
17.4
17.4
17.4
17.4
17.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
33.4
33.4
45.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
37.4
37.4
49.4
7.5
6.2
7.5
6.8
7.5
7.4
7.5
8.0
7.5
8.6
7.5
9.2
7.5
9.8
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
14.2
14.2
20.2
10.4
11.0
11.6
12.2
12.8
13.4
14.0
15.2
17.0
18.8
20.0
23.0
28.4
28.4
40.4
BRecommended Temperature Profile
HRS test conditions
Solder method
Environment
MAX 250ç
: Reflow, IR/hot air
: Room air
250
200
150
100
50
230ç
Solder composition : Paste,
96.5%Sn/3.0%Ag/0.5%Cu
(Senju Metal Industry,
Co., Ltd.'s
200ç
Part Number: M705-
221CM5-32-10.5)
: Glass epoxy
150ç
Test board
(ç)
25mm∞50mm∞0.8mm thick
Land dimensions
Metal mask
: 0.3mm
0.3mm
∞
∞
0.65mm,
0.8mm
: 0.23
∞0.55
0.65
∞0.1mm thick,
0.1mm thick
0.23∞
∞
25ç
(60sec.)
90 sec. to 120 sec.
Preheating
(60sec.)
Soldering
The temperature profiles are based on the above
conditions.
0
Start
60
120
In individual applications the actual temperature
may vary, depending on solder paste type,
volume/thickness and board size/thickness.
Consult your solder paste and equipment
manufacturer for specific recommendations.
Time (Seconds)
7
FH26 Series●0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
B
Operation and Precautions
Operation
1.FPC insertion procedure. Connector installed on the board.
1
Lift up the actuator. Use thumb or index finger.
2
Fully insert the FPC in the connector par-
allel to mounting surface, with the
exposed conductive traces facing down.
FPC conductor
surface (Bottom side)
3
Rotate down the actuator until firmly closed. It is
critical that the inserted FPC is not moved and
remains fully inserted.
2.FPC removal
1
Lift up the actuator. Carefully withdraw the
FPC.
8
FH26 Series●0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
Precautions
This connector needs to be handled with care due to its thin design and miniature
stature.
[ Precautions when mounting to PCB ]
SAcceptable amount of PCB distortion
The PCB distortion should be kept to a minimum. The maximum coplanarity of this connector is 0.1
mm, but excessive distortion can create solder failure.
SFPC specifications
Stiffeners can be used to improve the rigidity of the FPC. We recommend using a glass epoxy with
the thickness of 0.3mm or more.
SLoad to the connector
Do not apply any excessive force or mate/unmate these connectors until they are mounted, failure to
follow this precaution can lead to deformation or damage to these connectors. Inserting the FPC
prior to mounting is not recommended either.
[ Precautions in handling PCB after mounting ]
SApplied force to the PCB
Do not place any excessive force on the PCB after the connector has been mounted, this type of
action may damage the connectors. (e.g., When separating the PCB into multiple boards or
installing fastening screws onto the PCB)
SPCB bending
For PCB with a width of 100mm, it should not be bent more than a maximum of 0.5 mm. (Please
refer to the diagrams below.) PCB bending places an extra load onto the connector and will lead to
damage or malfunction.
Connector
PCB
100
Connector
100
PCB
Precautions When Inserting or Coupling FPC
Pay attention to the following points when inserting FPC.
SActuator operation
1
Do not apply excessive force when opening the actuator prior to FPC insertion. When opening
make sure that the force is applied only to the actuator itself, avoiding touching of the contacts.
Actuator
Damage to the contacts
Damage
Axis of rotation
2
Axis of rotation
Assure free rotation of
the actuator
9
FH26 Series●0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
Precautions
135˚
3
The actuator will rotate 135 degrees
maximum. Do not apply force to rotate
further. (1N max.)
4
When operating the actuator, do so at the
center portion.
5 As illustrated, do not attempt removal or re-
positioning of the actuator.
SFPC Insertionq
The FPC should be aligned parallel with the board surface and perpendicular with the connector (as
shown), then completely inserted.
Perpendicular with
the connector
To assure correct electrical and mechanical connection do not insert FPC at angle. It must be fully
inserted.
Make sure that the FPC is NOT MOVED during the closing of the actuator.
10
FH26 Series●0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
Precautions
SFPC Insertionw
Do not insert the FPC at any angle from above.
As illustrated, angle insertion may cause electrical discontinuity when the FPC is deflected in use.
*To avert insertion of the FPC on an angle, consideration should be given to securing FPC insertion
space at the time of board layout. Insertion will be difficult when the FPC is too short.
*Contact the FPC manufacturer for information about the bending specifications.
SVerification of the fully closed actuator.
The actuator should be fully closed (as illustrated) and the FPC held firmly in the connector.
Do not press against the actuator when is fully closed. Max force applied to the fully closed actuator
should not exceed 1 N.
Routing the FPC (FPC fully inserted/ actuator closed)
SFPC Load
Do not apply force in excess of 0.05N/pin max. in the upward direction (as illustrated). Do not bend
the FPC too close to the actuator.
Load : 0.05N/pin max.
11
FH26 Series●0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
Precautions
Removing the FPC
Rotate the actuator to the open position (maximum open angle of 135). Carefully withdraw the FPC.
135˚
Other Precautions
SHand Soldering Precautions
When hand soldering:
1
2
3
Do not perform reflow or hand soldering with the FPC inserted in the connector.
Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads.
Do not use excessive amount of solder or flux compounds.
Operation of the actuator and contacts may be affected by excessive amounts of solder or flux
compounds.
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 05/2017. Contents are subject to change without notice for the purpose of improvements.
12
相关型号：
FH26-45S-0.3SHW(99)
Card Edge Connector, 45 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal,
HRS
FH26-51S-0.3SHW
0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
HRS
FH26-51S-0.3SHW(05)
Card Edge Connector, 51 Contact(s), 2 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, ROHS COMPLIANT
HRS
FH26-51S-0.3SHW(10)
Card Edge Connector, 51 Contact(s), 2 Row(s), Female, Right Angle, 0.024 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, ROHS COMPLIANT
HRS
FH26-51S-0.3SHW(58)
Card Edge Connector, 51 Contact(s), 1 Row(s), Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking
HRS
FH26-51S-0.3SHW(98)
Card Edge Connector, 51 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal,
HRS
FH26-51S-0.3SHW(99)
Card Edge Connector, 51 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal,
HRS
FH26-55S-0.3SHW
0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
HRS
FH26-55S-0.3SHW(05)
Card Edge Connector, 55 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal, ROHS COMPLIANT
HRS
FH26-55S-0.3SHW(98)
Card Edge Connector, 55 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal,
HRS
FH26-55S-0.3SHW(99)
Card Edge Connector, 55 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal,
HRS
FH26-57S-0.3SHW
0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
HRS
©2020 ICPDF网 联系我们和版权申明