FH23-39S-0.3SHW(51) [HRS]
Card Edge Connector, 39 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking;型号: | FH23-39S-0.3SHW(51) |
厂家: | HRS |
描述: | Card Edge Connector, 39 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking PC 连接器 |
文件: | 总11页 (文件大小:305K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors
FH 23 Series
Staggered termination configuration. Only 1.25 mm above the board.
ꢀ
Leadless type
Completely enclosed
bottom surface
Lead type
1.25mm
ꢀFeatures
1. FPC low insertion force and high holding force
Hirose Electric's unique low insertion force (LIF) design
(patents pending) improves the Flexible Printed Circuit
(FPC) holding force after insertion.
FPC insertion force:Reduced approximately 36%
(as compared with FH18 Series connectors).
FPC holding force:Improvement of approximately 22%
(as compared with FH18 Series connectors).
2. Temporary hold of FPC
There is no need to hold the FPC after insertion in the
connector. The connector will hold it in correct position,
allowing closing of the actuator.
When the actuator is opened
3. Easy board mounting
The surface mounted termination of the contacts is staggered on
0.6 mm centers, positioned on front and back of the connector.
Bottom of the connector is completely insulated, allowing
conductive traces on PCB to run under the connector.
4. Proven Flip-lock Actuator assures easy and
reliable operation
Rotating actuator permits easy insertion and reliable connection
with the FPC. Tactile sensation confirms complete mechanical
locking of the actuator and the electrical connection.
5. Variations to suit different mounting areas
Available with lead and leadless type of terminations
(for opposing FPC insertion side).
Temporary hold of FPC
6. Designed for placement with automatic equipment
Flat top surface allows pick-up with vacuum nozzles.
Packaged in embossed tape, on reel. One reel contains 2,500 pieces.
7. Accepts 0.2mm thick FPC
8. Variety of contact positions
Available with 15,17,21, 25, 27, 31, 33, 39, 45, 51and 61 pos.
8. Environmental considerations
Plating is lead-free in order to protect environment.
ꢀApplications
Mobile phones, PDA’s, digital cameras, digital video
cameras and other compact devices requiring
interconnections of the main circuit with the LCD,
When the actuator is closed
plasma display (PDP), camera module, or other devices.
55
ꢀProduct Specifications
Operating temperature range
-55 ç to +85ç (Note 1)
Operating humidity range
Storage temperature range
-10ç to +50ç (Note 2)
Storage humidity range
Relative humidity 90% max.
Current rating 0.3 A DC
Ratings
Voltage rating 50 V AC
Relative humidity 90% max. (No condensation)
Recommended FPC
Thickness: = 0.2 0.03mm tinned copper or pure tin plating (Note 3)
Specification Conditions
Item
1. Insulation resistance 50 M ohms min.
100 V DC
2. Withstanding voltage No flashover or insulation breakdown
90 V AC/1 minute
100 m ohms max.
3. Contact resistance
1 mA AC
10 cycles
*Including FPC/FFC conductor resistance
4. Durability
Contact resistance: 100 m ohms max.
4. (insertion/ withdrawal) No damage, cracks, or parts dislocation.
No electrical discontinuity of 1 s or more.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
µ
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours
in each of the 3 directions
5. Vibration
6. Shock
No electrical discontinuity of 1 s. min.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
µ
Acceleration of 981 m/s2, 6ms duration, sine half-wave
waveform, 3 cycles in each of the 3 axis.
Contact resistance: 100 m ohms max.
Insulation resistance: 100 M ohms min.
No damage, cracks, or parts dislocation.
7. Humidity
96 hours at temperature of 40°C and humidity of 90% to 95%
(Steady state)
Contact resistance: 100 m ohms max.
Temperature:-55ç
/
+15ç to +35ç
/+85ç/+15ç to +35ç
8. Temperature cycle Insulation resistance: 100 M ohms min.
No damage, cracks, or parts looseness.
Time: 30
5 cycles
/
2 to 3
/
30 2 to 3 (Minutes)
/
No deformation of
components affecting performance.
9. Resistance to
soldering heat
Reflow: At the recommended temperature profile
Manual soldering: 350 ç 5 ç for 5 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term ”storage” refers to products stored for long period of time prior to mounting and use. Operating
Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage,
shipment or during transportation.
Note 3: When FPC is gold plated, the connector contacts should be also gold plated: Select the (05) specification.
ꢀMaterials
Part
Material
LCP
Finish
Remarks
UL94V-0
---------------
Color:Beige
Color:Black
Insulator
Contacts
LCP
Phosphor bronze
Pure tin plating (Note 3)
ꢀOrdering information
FH23 - 39S - 0.3 SHW (05)
1
2
3
4
5
1 Series name : FH23
2 No. of contacts.
4 Terminal type
SHW: SMT horizontal mounting type, lead type termination.
SHAW: SMT horizontal mounting type, lead-less type termination.
Number of contacts : 15,17,21,25,27,31,33,39,45,51,61
3 Contact pitch: 0.3 mm
Plating specifications :
5
Blank
(05)
: Tin plating
: Gold plating
56
BConnector Dimensions (Lead Type termination)
A
0.3
B
1.7
0.6
(0.15)
Number of contacts indicator
C
0.6
(0.12)
0.05MAX.
0.1MAX.
0.05MAX.
0.1MAX.
E
(D: FPC insertion area dimensions)
0.55
4.15
0.5
1
2
1
2
Notes
The coplanarity of each terminal lead is within 0.1.
1
2
3
The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body.
Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector.
Lead Type
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
FH23-15S-0.3SHW
FH23-17S-0.3SHW
FH23-21S-0.3SHW
FH23-25S-0.3SHW
FH23-27S-0.3SHW
FH23-31S-0.3SHW
FH23-33S-0.3SHW
FH23-39S-0.3SHW
FH23-45S-0.3SHW
FH23-51S-0.3SHW
FH23-61S-0.3SHW
586-1317-0
586-1300-7
586-1314-1
586-1322-0
586-1308-9
586-1302-2
586-1304-8
586-1306-3
586-1318-2
586-1312-6
586-1310-0
15
17
21
25
27
31
33
39
45
51
61
17.0
17.6
18.8
10.0
10.6
11.8
12.4
14.2
16.0
17.8
20.8
13.6
14.2
15.4
16.6
17.2
18.4
19.0
10.8
12.6
14.4
17.4
14.2
14.8
16.0
17.2
17.8
19.0
19.6
11.4
13.2
15.0
18.0
14.83
15.43
16.63
17.83
18.43
19.63
10.23
12.03
13.83
15.63
18.63
Note: Embossed tape reel packaging(2,500 pieces/reel)
Please order by number of reels.
57
ꢀConnector Dimensions Diagram (Leadless Type termination)
A
0.3
B
1.7
0.6
(0.15)
* *
Number of contacts indicator
C
0.6
(0.12)
0.05MAX.
0.1MAX.
0.05MAX.
E
0.1MAX.
(D: FPC insertion area dimensions)
0.55
4.15
1
2
1
2
Notes
The coplanarity of each terminal lead is within 0.1.
1
2
3
The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body.
Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector.
Leadless Type
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
FH23-15S-0.3SHAW
FH23-17S-0.3SHAW
FH23-21S-0.3SHAW
FH23-25S-0.3SHAW
FH23-27S-0.3SHAW
FH23-31S-0.3SHAW
FH23-33S-0.3SHAW
FH23-39S-0.3SHAW
FH23-45S-0.3SHAW
FH23-51S-0.3SHAW
FH23-61S-0.3SHAW
586-1316-7
586-1301-0
586-1315-4
586-1323-2
586-1309-1
586-1303-5
586-1305-0
586-1307-6
586-1319-5
586-1313-9
586-1311-3
15
17
21
25
27
31
33
39
45
51
61
17.0
17.6
18.8
10.0
10.6
11.8
12.4
14.2
16.0
17.8
20.8
13.6
14.2
15.4
16.6
17.2
18.4
19.0
10.8
12.6
14.4
17.4
14.2
14.8
16.0
17.2
17.8
19.0
19.6
11.4
13.2
15.0
18.0
14.83
15.43
16.63
17.83
18.43
19.63
10.23
12.03
13.83
15.63
18.63
Note: Embossed tape reel packaging(2,500 pieces/reel)
Please order by number of reels.
58
BRecommended PCB Land and Metal Mask Dimensions (Lead Type)
B
0.05
(Land)
0.3 0.05
0.6 0.05
0.25 0.05 (Metal masꢀ)
0.3 0.05
Recommended metal masꢀ thicꢀness: t = 0.1 mm
0.6 0.05
0.3 0.05 (Land)
0.25 0.05 (Metal masꢀ)
C
0.05
Lead Type
Unit: mm
Part Number
CL No.
Number of Contacts
B
C
G
FH23-15S-0.3SHW
FH23-17S-0.3SHW
FH23-21S-0.3SHW
FH23-25S-0.3SHW
FH23-27S-0.3SHW
FH23-31S-0.3SHW
FH23-33S-0.3SHW
FH23-39S-0.3SHW
FH23-45S-0.3SHW
FH23-51S-0.3SHW
FH23-61S-0.3SHW
586-1317-0
586-1300-7
586-1314-1
586-1322-0
586-1308-9
586-1302-2
586-1304-8
586-1306-3
586-1318-2
586-1312-6
586-1310-0
15
17
21
25
27
31
33
39
45
51
61
03.6
04.2
05.4
06.6
07.2
08.4
09.0
10.8
12.6
14.4
17.4
04.2
04.8
06.0
07.2
07.8
09.0
09.6
11.4
13.2
15.0
18.0
04.8
05.4
06.6
07.8
08.4
09.6
10.2
12.0
13.8
15.6
18.6
BRecommended Land and Metal Mask Dimensions (Leadless Type)
B
0.05
0.3 0.05(Land)
0.6 0.05
0.25 0.05(Metal masꢀ)
0.3 0.05
Recommended metal masꢀ thicꢀness: t = 0.1 mm
0.3 0.05
(Land)
0.6 0.05
0.25 0.05(Metal masꢀ)
C
0.05
Leadless Type
Unit: mm
Part Number
CL No.
Number of Contacts
B
C
G
FH23-15S-0.3SHAW
FH23-17S-0.3SHAW
FH23-21S-0.3SHAW
FH23-25S-0.3SHAW
FH23-27S-0.3SHAW
FH23-31S-0.3SHAW
FH23-33S-0.3SHAW
FH23-39S-0.3SHAW
FH23-45S-0.3SHAW
FH23-51S-0.3SHAW
FH23-61S-0.3SHAW
586-1316-7
586-1301-0
586-1315-4
586-1323-2
586-1309-1
586-1303-5
586-1305-0
586-1307-6
586-1319-5
586-1313-9
586-1311-3
15
17
21
25
27
31
33
39
45
51
61
03.6
04.2
05.4
06.6
07.2
08.4
09.0
10.8
12.6
14.4
17.4
04.2
04.8
06.0
07.2
07.8
09.0
09.6
11.4
13.2
15.0
18.0
04.8
05.4
06.6
07.8
08.4
09.6
10.2
12.0
13.8
15.6
18.6
59
BRecommended FPC Dimensions
G
C
0.05
0.03
0.07
0.3 0.07
0.3
0.4 +0.04
4
0.02
0.6
-0.03
0.3 +0.04
( 0.2 )
( 0.1 )
-0.03
(0.07)
0.2 0.03
(0.2)
(0.05)
(0.1 between conductors)
(0.2 conductor width)
0.6 0.07
0.6 0.02
0.3 0.02
B
0.03
+0.04
4
5
0.3
also permitted when drawing plated leads.
- 0.03
Polyamide and thermally hardening adhesive is recommended as the materials for the stiffener.
BPackaging Specification
Embossed Carrier Tape Dimensions(Tape width of 24 mm max.)
ꢀ
2
0.15
4
0.1
12 0.1
(1.7)
(0.3)
Flat surface for placement
with Automatic equipment
(0.85)(0.5) (5.1)
(2.45)
Unreeling direction
Unit: mm
Q
Part Number
CL No.
Number of Contacts
H
K
L
M
N
FH23-15S-0.3SHW
FH23-15S-0.3SHAW
FH23-17S-0.3SHW
FH23-17S-0.3SHAW
FH23-21S-0.3SHW
FH23-21S-0.3SHAW
FH23-25S-0.3SHW
FH23-25S-0.3SHAW
FH23-27S-0.3SHW
FH23-27S-0.3SHAW
FH23-31S-0.3SHW
FH23-31S-0.3SHAW
FH23-33S-0.3SHW
FH23-33S-0.3SHAW
FH23-39S-0.3SHW
FH23-39S-0.3SHAW
FH23-45S-0.3SHW
FH23-45S-0.3SHAW
FH23-51S-0.3SHW
FH23-51S-0.3SHAW
586-1317-0
586-1316-7
586-1300-7
586-1301-0
586-1314-1
586-1315-4
586-1322-0
586-1323-2
586-1308-9
586-1309-1
586-1302-2
586-1303-5
586-1304-8
586-1305-0
586-1306-3
586-1307-6
586-1318-2
586-1319-5
586-1312-6
586-1313-9
0
0
0
05.1
05.7
06.9
08.1
08.7
09.9
10.5
12.3
14.1
15.9
0
0
0
0
0
0
0
15
7.3
4.5
16
07.5
16.5
17
21
25
27
31
33
39
45
51
7.9
9.1
5.1
6.3
7.5
8.1
9.3
9.9
10.3
10.9
12.1
12.7
14.5
16.3
18.1
24
11.5
24.5
11.7
13.5
15.3
60
Embossed Carrier Tape Dimensions(Tape width of 32 mm min.)
ꢀ
2
0.15
4
0.1
12 0.1
(1.7)
(0.3)
1.5+0.1
0
Flat surface for placement
with Automatic equipment
(0.85)
(5.1)
(0.5)
Unreeling direction
(2.45)
Unit: mm
Q
Part Number
CL No.
Number of Contacts
61
H
J
K
L
M
N
FH23-61S-0.3SHW
FH23-61S-0.3SHAW
586-1310-0
586-1311-3
32
28.4
14.2
21.1
18.9
18.3
32.5
Reel Dimensions
ꢀ
(2)(Q)
End portion
Mounting portion
Lead portion (400 mm min.)
Embossed carrier tape
Top cover tape
Blanꢀ portion
Blanꢀ portion
(10 pocꢀets min.)
(10 pocꢀets min.)
61
BRecommended Temperature Profile
Using Conventional Solder Paste
ꢀ
5 sec. Max.
240ç
250
200
150
100
50
200ç
Recommended Conditions
Reflow system
Solder
:IR reflow
160ç
150ç
:Paste type 63 Sn/37 Pb
(ç)
(Flux content 11 wt%)
Test board
: Glass epoxy 45mm x 100mm x 1.6mm
Metal mask thickness : 0.1 mm
Recommended temperature profile.
The temperature may be slightly changed according to the solder
paste type and thickness.
(30 sec.)
(20 sec.
25ç
(60 sec.)
to 30 sec.)
60 sec. to 90 sec.
Preheating
Soldering
0
Start
60
120
Time (Seconds)
Using Lead-free Solder paste
ꢀ
Max. 250ç
250
200
150
100
50
230ç
200ç
Recommended Conditions
Reflow system
Solder
:IR reflow
:Paste type Sn/0.3 Ag/0.5 Cu
(Flux content 11 wt%)
150ç
(ç)
Test board
:Glass epoxy 45mm x 100mm x 1.6 mm
Metal mask thickness :0.1 mm
Recommended temperature profile.
The temperature may be slightly changed according to the solder
paste type and thickness.
25ç
(60 sec.)
90 sec. to 120 sec.
Preheating
(60 sec.)
Soldering
0
Start
60
120
Time (Seconds)
62
BFH23 Series FPC Construction (Recommended Specifications)
1. Using Single-sided FPC
Material Name
Covering film layer.
Cover adhesive
Surface treatment
Copper foil
Material
Polyamide 1 mil thick.
Thickness (µm)
25
25
5
Tinned copper plating or pure tin plating
Cu
1oz
35
25
25
30
75
195
Base adhesive
Base film
Polyamide
1 mil thick
Reinforcement material adhesive Heat-hardened adhesive
Stiffener
Polyamide
Total
3 mil thick
2. Using Double-sided FPC
Material Name
Material
Polyamide 1 mil thick
Thickness (µm)
Covering layer film
Cover adhesive
Surface treatment
Through-hole copper
Copper foil
25
25
5
Tinned copper plating or pure tin plating
Cu
15
18
18
25
18
18
25
25
25
25
199
Cu
1/2oz
Base adhesive
Base film
Polyamide
Cu
1 mil thick
1/2oz
Base adhesive
Copper foil
Cover adhesive
Covering layer film
Polyamide
1 mil thick
Reinforcement material adhesive Heat-hardened adhesive
Stiffener
Polyamide
Total
1 mil thick
3. Precautions
Note : Recommended specification for FPC 0.2 0.03 mm thick.
FPC/FFC Manufactures' Contact List
Sumitomo Bakelite Co., Ltd. Flexible Printed Circuit Board Division
5-8, Higashi-shinagawa 2-chome, Shinagawa-ku, Tokyo, Japan
TEL:+81 3 5462 4191
FAX:+81 3 5462 4882
Fujikura Ltd. Electronics Global Marketing Department
1-5-1, Kiba, Koto-ku, Tokyo, Japan
TEL:+81 3 5606 1165
FAX:+81 3 5606 1530
NOK Corporation Sales Division Overseas Business Department
1-12-15, Shiba-Daimon, Minato-ku, Tokyo, Japan
TEL:+81 3 3432 6976/8415
FAX:+81 3 3432 3919
63
BConnector Operation and Precautions
Operation
1. FPC Termination procedure
1
Lift up the actuator. Use thumb or index finger.
2
Insert with the FPC parallel to the mounting surface, with the exposed conductive traces facing down.
FPC
conductor surface
Step 1
Step 2
Step 3
3
Rotate down the actuator until firmly closed.
NOTE: The FPC must be fully inserted in the connector. If not fully
inserted, the actuator will not close properly. Should this be the
case, lift up the actuator (per Step 2 below) and repeat the process
(starting with Step 1 above)
3
For connectors with multiple contacts, such as 39 and 61 pos.
rotate down the actuator pushing at both ends.
2. FPC Extraction Method
1
Lift up the actuator. Carefully remove the FPC.
64
Precautions
1
The actuator is designed to withstand normal opening/closing operation. However, care should be taken
not to use excessive force or grasping it with any type of tool.
2
The actuator is designed to open/close 90° max. Cycling
above this may cause discontinuity, damage or
dislocation of the actuator.
90°
3
Do not apply pull forces on the FPC, especially in the
upward direction. If needed, secure the FPC to avoid
transfer of pull forces to the terminated connector.
65
相关型号:
FH23-45S-0.3SHAW
0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors
HRS
FH23-45S-0.3SHW
0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors
HRS
FH23-45S-0.3SHW(05)
Card Edge Connector, 45 Contact(s), 1 Row(s), Female, Right Angle, 0.01 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, HALOGEN FREE
HRS
FH23-45S-0.3SHW(51)
Card Edge Connector, 45 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking
HRS
FH23-51S-0.3SHAW
0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors
HRS
FH23-51S-0.3SHAW(51)
Card Edge Connector, 51 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking
HRS
FH23-51S-0.3SHAW(52)
Card Edge Connector, 51 Contact(s), 1 Row(s), Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator
HRS
FH23-51S-0.3SHW
0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors
HRS
FH23-51S-0.3SHW(05)
Card Edge Connector, 51 Contact(s), 2 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator,
HRS
FH23-51S-0.3SHW(06)
Card Edge Connector, 51 Contact(s), 1 Row(s), Female, Right Angle, 0.01 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, HALOGEN FREE
HRS
FH23-61S-0.3SHAW
0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors
HRS
©2020 ICPDF网 联系我们和版权申明