FH12A-24S-0.5SH(54) [HRS]
Card Edge Connector, 24 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal;型号: | FH12A-24S-0.5SH(54) |
厂家: | HRS |
描述: | Card Edge Connector, 24 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal PC 连接器 |
文件: | 总20页 (文件大小:691K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
0.5 mm and 1 mm Pitch FPC/FFC Connectors
FH12 Series
■Features
Rotating one-touch ZIF mechanism
1. Rotating one-touch ZIF mechanism
The one-touch rotating ZIF mechanism is easier
to operate and works with a light force.
q
2. Clear tactile click
A clear tactile click is delivered upon the
successful completion of the mating process
3. Supports high density mounting
The FH12’s one-touch ZIF system requires less
space than a slide locking connector and can be
mounted in the center of the PCB.
4. Top & Bottom Contact and Vertical
Mount type
w
There are three connection types available: top
contact, bottom contact and a Vertical mount.
5. 1 mm pitch product
Contact surface of the FPC+FFC
In addition to the 0.5 mm pitch connector, we also
offer a 1 mm pitch connector.
6. Reinforced actuator
The FH12S version in 30, 40, 45, 50, and 53 pin
counts are offered with a reinforced actuator that
provides an extra measure of security against
actuator breakage.
e
7. Supports 0.18 mm thick FPC
The FH12F version connector supports a 0.18
mm thick FPC (±0.05).
Double-sided FPC do not require a stiffener when
used on the connectors.
2013.11②
1
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■Product Specifications
Current rating: 0.5A DC(Note 1) Operating Temperature Range:_40 to +85ç (Note 2) Storage Temperature Range:_10 to +50ç (Note 3)
Voltage rating: 50V AC Operating Humidity Range:Relative humidity, 90% max. Storage Humidity Range:Relative humidity, 90% max.
Rating
(Not dewed)
(Not dewed)
Adaptive FPC/FFC contact specifications
Gold
plated
t=0.3 0.05
t=0.18 0.05 ꢀor ꢁH12ꢁF-SF0.5SH
Conditions
Item
Specification
1. Insulation resistance 500M ohms minimum
2. Withstanding voltage No ꢀlashover or insulation breakdown.
100V DC
150V AC/1 minute
1mA
3. Contact resistance
50m ohms maximum
Contact resistance: 50m ohms maximum
No damage, cracks, or parts dislocation.
4. Durability (Insertion/withdrawal)
20 cycles
No electrical discontinuity oꢀ 1μs or more
Contact resistance: 50m ohms maximum.
No damage, cracks, or parts dislocation.
ꢁrequency: 10 to 55 Hz, single amplitude oꢀ 0.75 mm,
ꢀor 10 cycles in 3 axial directions
5. Vibration
6. Shock
No electrical discontinuity oꢀ 1μs or more
Contact resistance: 50m ohms maximum.
No damage, cracks, or parts dislocation.
2
Acceleration oꢀ 981 m/s , 6 ms duaration,
sine halꢀFwave waveꢀorm, 3 cycles in each oꢀ the 3 axis
Contact resistance: 50m ohms maximum.
7. Humidity(Steady state) Insulation resistance: 50M ohms minimum. 96 hours at 40ç and humidity oꢀ 90% to 95%
No damage, cracks, or parts dislocation.
Contact resistance: 50m ohms maximum.
Temperature: F40ç / 15 to 35ç / 85ç / 15 to 35ç,
8. Temperature Cycle
Insulation resistance: 50M ohms minimum. Time: 30 / 2 to 3 / 30 / 2 to 3(minutes)
No damage, cracks, or parts dislocation.
5 cycles
No deꢀormation oꢀ
components aꢀꢀecting perꢀormance.
Reꢀlow: At the recommended temperature proꢀile
Manual soldering: 350 10ç ꢀor 5 seconds
9.Resistance to Soldering heat
Note 1: When passing the current through all oꢀ the contacts,use 70% oꢀ the current rating.
Note 2: Includes temperature rise caused by current ꢀlow.
Note 3: The term "storage" reꢀers to products stored ꢀor long period oꢀ time prior to mounting and use. Operating Temperature
Range and Humidity range covers nonconducting condition oꢀ installed connectors in storage, shipment or during
transportation.
■Material
Part
Material
Polyamide, LCP(60 pos.)
PPS
Finish
Remarks
UL94V-0
Color : Beige
Color : Dark brown
Gold plated
Insulator
Contact
Phosphor bronze
Brass
–––––––
Metal Fittings
Tin plated
■Ordering Information
--
FH 12 A - 10 (4) S A - 0.5 SH ( )
q
w
e
r
t
y
u
i
o
!
q Series Name
w Series No.
: FH
: 12
y Contact alignment: Single
u Eccentric direction:
e Blank : standard type
A : Top contact type
Blank : standard type
A : Eccentric type
S : Type with strengthed flip-lock actuator
F : Type with 0.18mm FPC End Thickness
r Standard type : Number of contacts
i Contacts Pitch : 0.5mm, 1mm
o Contact type
SH
SV
:
:
SMT horizontal mounting type
SMT vertical mounting type
Eccentric type
: Number of contacts in 0.5mm housing
t Standard type : Blank
! Plating specification
Eccentric type : Number of contacts
(54)
(55)
: Selective gold plated
: Gold plated
(1)(98) : Gold plated 500 pieces/reel
2
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■Series Configuration
Pitch
Bottom Contact Type
Top Contact Type
Vertical mounting Type
FPC/FFC conductive
surface(bottom side)
FPC/FFC conductive
surface
FH12- -- S-0.5SH
P.4
Number of contacts 6, 8, 10, 11, 12, 13,
14, 15, 16, 17, 18, 19,
20, 22, 24, 25, 26, 28,
30, 32, 33, 34, 35, 36,
40, 45, 50, 53
0.5mm
Type with Strengthened Lock Lever
P.5
FH12S- -- S-0.5SH
Number of contacts 30, 40, 45, 50, 53
Type with 0.18mm FPC End Thickness
P.7
P.8
FH12A- -- S-0.5SH
FH12- -- S-0.5SV
P.6
FH12F- -- S-0.5SH
Number of contacts 10, 12 ,15, 16, 18, 20,
22, 24, 26, 28, 29, 30,
32, 33, 34, 36, 40, 42,
45, 50
Number of contacts 10, 12, 13, 15, 16, 17,
18, 20, 22, 24, 26, 30,
32, 33, 34, 36, 40, 45,
49, 50, 60
Number of contacts 6, 8, 10, 12, 13, 14, 15,
16, 18, 20, 22, 24, 25,
26, 28, 30, 32, 34, 36, 40
FPC/FFC conductive
surface(bottom side)
1mm
P.9
Standard FH12- -- S-1SH
Eccentric FH12- -- (--) SA-1SH
Standard
Number of contacts 5, 6, 7, 8, 9, 11,
12,16,17,22,26
P.10
FH12- -- S-1SV
Eccentric
Number of contacts 6, 7, 8, 16, 20, 22,
24
Number of contacts 4, 6, 8, 10, 11,
14, 19, 24
3
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■0.5mm Pitch Bottom Contact Type
A
0.5
(0.2)
polarizing mark indicator
Number oꢀ Contacts indicator
B
C
D
4.6
5.6
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
Note 5 : If there is no problem with the connector height, we recommend the type with the strengthened Flip-
lock actuator (FH12S-*S-0.5SH). Standard type connector height: 2 mm Connector height of type with
strengthened Flip-lock actuator: 2.4 mm
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
D
6
2.5
06.1
07.1
08.1
08.6
09.1
09.6
10.1
10.6
11.1
11.6
12.1
12.6
13.1
14.1
15.1
15.6
16.1
17.1
18.1
19.1
19.6
20.1
20.6
21.1
23.1
25.6
28.1
29.6
7.1
3.57
FH12-6S-0.5SH(--)
FH12-8S-0.5SH(--)
586-0582-5---
586-0744-5---
8
3.5
8.1
4.57
10
11
12
13
14
15
16
17
18
19
20
22
24
25
26
28
30
32
33
34
35
36
40
45
50
53
4.5
9.1
5.57
FH12-10S-0.5SH(--) 586-0522-3---
FH12-11S-0.5SH(--) 586-0600-5---
FH12-12S-0.5SH(--) 586-0704-0---
FH12-13S-0.5SH(--) 586-0549-0---
FH12-14S-0.5SH(--) 586-0533-0---
FH12-15S-0.5SH(--) 586-0523-6---
FH12-16S-0.5SH(--) 586-0531-4---
FH12-17S-0.5SH(--) 586-0606-1---
FH12-18S-0.5SH(--) 586-0530-1---
FH12-19S-0.5SH(--) 586-0534-2---
FH12-20S-0.5SH(--) 586-0524-9---
FH12-22S-0.5SH(--) 586-0532-7---
FH12-24S-0.5SH(--) 586-0521-0---
FH12-25S-0.5SH(--) 586-0692-3---
FH12-26S-0.5SH(--) 586-0576-2---
FH12-28S-0.5SH(--) 586-0612-4---
FH12-30S-0.5SH(--) 586-0525-1---
FH12-32S-0.5SH(--) 586-0681-7---
FH12-33S-0.5SH(--) 586-0520-8---
FH12-34S-0.5SH(--) 586-0617-8---
FH12-35S-0.5SH(--) 586-0740-4---
FH12-36S-0.5SH(--) 586-0526-4---
FH12-40S-0.5SH(--) 586-0527-7---
FH12-45S-0.5SH(--) 586-0528-0---
FH12-50S-0.5SH(--) 586-0529-2---
FH12-53S-0.5SH(--) 586-0595-7---
5.0
9.6
6.07
5.5
10.1
10.6
11.1
11.6
12.1
12.6
13.1
13.6
14.1
15.1
16.1
16.6
17.1
18.1
19.1
20.1
20.6
21.1
21.6
22.1
24.1
26.6
29.1
30.6
6.57
6.0
7.07
6.5
7.57
7.0
8.07
7.5
8.57
8.0
9.07
8.5
9.57
9.0
10.07
10.57
11.57
12.57
13.07
13.57
14.57
15.57
16.57
17.07
17.57
18.07
18.57
20.57
23.07
25.57
27.07
9.5
10.5
11.5
12.0
12.5
13.5
14.5
15.5
16.0
16.5
17.0
17.5
19.5
22.0
24.5
26.0
5
Note
5
5
5
5
Note
Note
Note
Note
Note 1 : Embossed tape reel packaging (2,000 pieces/reel, 500 pieces/reel). Order by number of
reels.
4
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■
0.5mm Pitch Bottom Contact Type with Strengthened Flip-lock Actuator
A
0.5
(0.2)
polarizing mark indicator
Number oꢀ Contacts indicator
B
C
D
4.6
5.6
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
D
30
40
45
50
53
14.5
19.5
22.0
24.5
26.0
18.1
23.1
25.6
28.1
29.6
19.1
24.1
26.6
29.1
30.6
15.57
20.57
23.07
25.57
27.07
FH12S-30S-0.5SH(--) 586-0667-6---
FH12S-40S-0.5SH(--) 586-0640-0---
FH12S-45S-0.5SH(--) 586-0665-0---
FH12S-50S-0.5SH(--) 586-0642-5---
FH12S-53S-0.5SH(--) 586-0691-0---
Note 1 : Embossed tape reel packaging (2,000 pieces/reel, 500 pieces/reel).
Order by number of reels.
5
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■0.5mm Pitch Bottom Contact Type with 0.18mm FPC End Thickness
A
Applicable FPC end thickness : 0.18 0.05
0.5
(0.2)
polarizing mark indicator
Number oꢀ Contacts indicator
B
C
D
4.6
5.6
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
D
ꢁH12ꢁF6SF0.5SH(--)
ꢁH12ꢁF8SF0.5SH(--)
586F0672F6F--
586F0738F2F--
6
2.5
6.1
7.1
3.57
8
3.5
7.1
8.1
4.57
ꢁH12ꢁF10SF0.5SH(--) 586F0709F4F--
ꢁH12ꢁF12SF0.5SH(--) 586F0653F1F--
ꢁH12ꢁF13SF0.5SH(--) 586F0629F7F--
ꢁH12ꢁF14SF0.5SH(--) 586F0655F7F--
ꢁH12ꢁF15SF0.5SH(--) 586F0680F4F--
ꢁH12ꢁF16SF0.5SH(--) 586F0673F9F--
ꢁH12ꢁF18SF0.5SH(--) 586F0626F9F--
ꢁH12ꢁF20SF0.5SH(--) 586F0636F2F--
ꢁH12ꢁF22SF0.5SH(--) 586F0630F6F--
ꢁH12ꢁF24SF0.5SH(--) 586F0632F1F--
ꢁH12ꢁF25SF0.5SH(--) 586F0733F9F--
ꢁH12ꢁF26SF0.5SH(--) 586F0627F1F--
ꢁH12ꢁF28SF0.5SH(--) 586F0643F8F--
ꢁH12ꢁF30SF0.5SH(--) 586F0628F4F--
ꢁH12ꢁF32SF0.5SH(--) 586F0705F3F--
ꢁH12ꢁF34SF0.5SH(--) 586F0677F0F--
ꢁH12ꢁF36SF0.5SH(--) 586F0656F0F--
ꢁH12ꢁF40SF0.5SH(--) 586F0635F0F--
10
12
13
14
15
16
18
20
22
24
25
26
28
30
32
34
36
40
4.5
8.1
9.1
5.57
5.5
9.1
10.1
10.6
11.1
11.6
12.1
13.1
14.1
15.1
16.1
16.6
17.1
18.1
19.1
20.1
21.1
22.1
24.1
6.57
6.0
9.6
7.07
6.5
10.1
10.6
11.1
12.1
13.1
14.1
15.1
15.6
16.1
17.1
18.1
19.1
20.1
21.1
23.1
7.57
7.0
8.07
7.5
8.57
8.5
9.57
9.5
10.57
11.57
12.57
13.07
13.57
14.57
15.57
16.57
17.57
18.57
20.57
10.5
11.5
12.0
12.5
13.5
14.5
15.5
16.5
17.5
19.5
Note 1 : Embossed tape reel packaging (2,000 pieces/reel).
Order by number of reels.
6
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■0.5mm Pitch Top Contact Type
A
B
C
0.5
(
)
0.2
6.2
polarizing mark indicator
D
E
(
)
0.45
0.8
1.45
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit:mm
E
Part Number
CL No.
Number of Contacts
A
B
C
D
ꢁH12AF10SF0.5SH(--) 586F0550F9F--
ꢁH12AF12SF0.5SH(--) 586F0696F4F--
ꢁH12AF15SF0.5SH(--) 586F0551F1F--
ꢁH12AF16SF0.5SH(--) 586F0552F4F--
ꢁH12AF18SF0.5SH(--) 586F0553F7F--
ꢁH12AF20SF0.5SH(--) 586F0554F0F--
ꢁH12AF22SF0.5SH(--) 586F0686F0F--
ꢁH12AF24SF0.5SH(--) 586F0555F2F--
ꢁH12AF26SF0.5SH(--) 586F0663F5F--
ꢁH12AF28SF0.5SH(--) 586F0725F0F--
ꢁH12AF29SF0.5SH(--) 586F0585F3F--
ꢁH12AF30SF0.5SH(--) 586F0556F5F--
ꢁH12AF32SF0.5SH(--) 586F0687F3F--
ꢁH12AF33SF0.5SH(--) 586F0570F6F--
ꢁH12AF34SF0.5SH(--) 586F0670F0F--
ꢁH12AF36SF0.5SH(--) 586F0662F2F--
ꢁH12AF40SF0.5SH(--) 586F0557F8F--
ꢁH12AF42SF0.5SH(--) 586F0698F0F--
ꢁH12AF45SF0.5SH(--) 586F0558F0F--
ꢁH12AF50SF0.5SH(--) 586F0559F3F--
10
12
15
16
18
20
22
24
26
28
29
30
32
33
34
36
40
42
45
50
9.1
8.35
4.5
9.5
5.57
10.1
11.6
12.1
13.1
14.1
15.1
16.1
17.1
18.1
18.6
19.1
20.1
20.6
21.1
22.1
24.1
25.1
26.6
29.1
9.35
5.5
10.5
12.0
12.5
13.5
14.5
15.5
16.5
17.5
18.5
19.0
19.5
20.5
21.0
21.5
22.5
24.5
25.5
27.0
29.5
6.57
10.85
11.35
12.35
13.35
14.35
15.35
16.35
17.35
17.85
18.35
19.35
19.85
20.35
21.35
23.35
24.35
25.85
28.35
7.0
8.07
7.5
8.57
8.5
9.57
9.5
10.57
11.57
12.57
13.57
14.57
15.07
15.57
16.57
17.07
17.57
18.57
20.57
21.57
23.07
25.57
10.5
11.5
12.5
13.5
14.0
14.5
15.5
16.0
16.5
17.5
19.5
20.5
22.0
24.5
Note 1 : Embossed tape reel packaging (2,000 pieces/reel).
Order by number of reels.
7
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■0.5mm Pitch Vertical mounting Type
(
)
0.2
1
(
)
0.15
1
ꢁ
(
)
4.25
(
A
B
)
1.75
0.5
C
D
E
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
4
4
4
4
4
4
4
4
8
8
8
8
8
8
8
8
8
8
8
8
8
10
12
13
15
16
17
18
20
22
24
26
30
32
33
34
36
40
45
49
50
60
8.4
6.9
4.5
6.5
8.2
ꢁH12F10SF0.5SV(--) 586F0560F2F--
ꢁH12F12SF0.5SV(--) 586F0615F2F--
ꢁH12F13SF0.5SV(--) 586F0575F0F--
ꢁH12F15SF0.5SV(--) 586F0561F5F--
ꢁH12F16SF0.5SV(--) 586F0572F1F--
ꢁH12F17SF0.5SV(--) 586F0601F8F--
ꢁH12F18SF0.5SV(--) 586F0573F4F--
ꢁH12F20SF0.5SV(--) 586F0562F8F--
ꢁH12F22SF0.5SV(--) 586F0589F4F--
ꢁH12F24SF0.5SV(--) 586F0563F0F--
ꢁH12F26SF0.5SV(--) 586F0664F8F--
ꢁH12F30SF0.5SV(--) 586F0564F3F--
ꢁH12F32SF0.5SV(--) 586F0699F2F--
ꢁH12F33SF0.5SV(--) 586F0565F6F--
ꢁH12F34SF0.5SV(--) 586F0706F6F--
ꢁH12F36SF0.5SV(--) 586F0641F2F--
ꢁH12F40SF0.5SV(--) 586F0566F9F--
ꢁH12F45SF0.5SV(--) 586F0567F1F--
ꢁH12F49SF0.5SV(--) 586F0602F0F--
ꢁH12F50SF0.5SV(--) 586F0568F4F--
ꢁH12F60SF0.5SV(--) 586F0735F4F--
9.4
7.9
5.5
7.5
9.2
9.9
8.4
6.0
8.0
9.7
10.9
11.4
11.9
12.4
13.4
14.4
15.4
16.4
18.4
19.4
19.9
20.4
21.4
23.4
25.9
27.9
28.4
33.4
9.4
7.0
9.0
10.7
11.2
11.7
12.2
13.2
14.2
15.2
16.2
18.2
19.2
19.7
20.2
21.2
23.2
25.7
27.7
28.2
33.2
9.9
7.5
9.5
10.4
10.9
11.9
12.9
13.9
14.9
16.9
17.9
18.4
18.9
19.9
21.9
24.4
26.4
26.9
31.9
8.0
10.0
10.5
11.5
12.5
13.5
14.5
16.5
17.5
18.0
18.5
19.5
21.5
24.0
26.0
26.5
31.5
8.5
9.5
10.5
11.5
12.5
14.5
15.5
16.0
16.5
17.5
19.5
22.0
24.0
24.5
29.5
Note 1 : Embossed tape reel packaging (1,000 pieces/reel, 500 pieces/reel).
Order by number of reels.
8
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■1mm Pitch Type Bottom Contact Type
2.3
A
E
1.0
(0.2)
polarizing mark indicator
Number oꢀ Contacts indicator
B
C
D
4.6
5.6
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit:mm
Part Number
ꢁH12F5SF1SH(--)
ꢁH12F6SF1SH(--)
ꢁH12F7SF1SH(--)
ꢁH12F8SF1SH(--)
ꢁH12F9SF1SH(--)
ꢁH12F11SF1SH(--)
ꢁH12F12SF1SH(--)
ꢁH12F16SF1SH(--)
ꢁH12F17SF1SH(--)
ꢁH12F22SF1SH(--)
ꢁH12F26SF1SH(--)
CL No.
Number of Contacts
A
4
B
C
D
E
5
6
8.6
9.6
6.07
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.8
586F0591F6F--
586F0607F4F--
586F0535F5F--
586F0579F0F--
586F0540F5F--
586F0668F9F--
586F0741F7F--
586F0536F8F--
586F0739F5F--
586F0547F4F--
586F0592F9F--
5
9.6
10.6
11.6
12.6
13.6
15.6
16.6
20.6
21.6
26.6
30.6
9.1
7.07
7
6
10.6
11.6
12.6
14.6
15.6
19.6
20.6
25.6
29.6
8.1
8.07
8
7
9.07
9
8
10.07
12.07
13.07
17.07
18.07
23.07
27.07
5.57
11
12
16
17
22
26
4
10
11
15
16
21
25
3
ꢁH12F10(4)SAF1SH(--) 586F0537F0F--
ꢁH12F14(6)SAF1SH(--) 586F0538F3F--
ꢁH12F18(8)SAF1SH(--) 586F0539F6F--
ꢁH12F22(10)SAF1SH(--) 586F0541F8F--
ꢁH12F24(11)SAF1SH(--) 586F0542F0F--
ꢁH12F30(14)SAF1SH(--) 586F0543F3F--
ꢁH12F40(19)SAF1SH(--) 586F0546F1F--
ꢁH12F50(24)SAF1SH(--) 586F0548F7F--
6
5
10.1
12.1
14.1
15.1
18.1
23.1
28.1
11.1
13.1
15.1
16.1
19.1
24.1
29.1
7.57
8
7
9.57
10
11
14
19
24
9
11.57
12.57
15.57
20.57
25.57
10
13
18
23
Note 1: Embossed tape reel packaging (2,000 pieces/reel, 500 pieces/reel). Order by number of reels.
9
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■1mm Pitch Vertical Mounting Type
(0.2)
2
(0.15)
2
ꢁ
(4.25)
(1.75)
A
B
1.0
( )
3.8 Metal ꢀitting dimension
C
D
E
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
5
D
8
E
F
4
4
4
8
8
8
8
6
7
9.9
8.4
9.7
ꢁH12F6SF1SV(--)
ꢁH12F7SF1SV(--)
ꢁH12F8SF1SV(--)
586F0605F9F--
586F0610F9F--
586F0593F1F--
10.9
11.9
19.9
23.9
25.9
27.9
9.4
6
9
10.7
11.7
19.7
23.7
25.7
27.7
8
10.4
18.4
22.4
24.4
26.4
7
10
18
22
24
26
16
20
22
24
15
19
21
23
ꢁH12F16SF1SV(--) 586F0574F7F--
ꢁH12F20SF1SV(--) 586F0634F7F--
ꢁH12F22SF1SV(--) 586F0584F0F--
ꢁH12F24SF1SV(--) 586F0594F4F--
Note 1 : Embossed tape reel packaging (1,000 pieces/reel, 500 pieces/ree).
Order by number of reels.
10
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■
Recommended FPC/FFC dimensions and Land/Metal Mask dimensions
●0.5mm Pitch Product
FPC/FFC dimensions
Land / Metal Mask dimensions
B
C
0.1
0.1
C
0.5 0.05
0.35 0.03(FPC)
0.3 0.03(FFC)
0.5 0.1
A
B
0.05
0.07
0.3 0.03(Land)
0.5 0.1
0.5 0.05
0.25 0.03(Metal mask)
A
0.05
Product Type
C Dimension
Types other than 0.3 0.05min
Recommended metal mask thickness : 0.15mm
0.5mm
Pitch
Bottom
Contact
Type
those below
ꢁH12ꢁ
Stiꢀꢀener thickness should be 0.188 mm (7.5 mil) min
0.18 0.05
Unit: mm
Unit: mm
Dimension
Dimension
Dimension
Dimension
Number
A
B
Number
A
B
A
B
C
A
B
C
Number
Number
of Contacts
of Contacts
of Contacts
of Contacts
6
8
2.5 3.5
3.5 4.5
4.5 5.5
5.0 6.0
5.5 6.5
6.0 7.0
6.5 7.5
7.0 8.0
7.5 8.5
8.0 9.0
8.5 9.5
9.0 10.0
9.5 10.5
10.5 11.5
11.5 12.5
25
12.0 13.0
12.5 13.5
13.5 14.5
14.0 15.0
14.5 15.5
15.5 16.5
16.0 17.0
16.5 17.5
17.0 18.0
17.5 18.5
19.5 20.5
20.5 21.5
22.0 23.0
24.5 25.5
26.0 27.0
6
8
2.5 8.1 4.5
3.5 9.1 5.5
4.5 10.1 6.5
5.0 10.6 7.0
5.5 11.1 7.5
6.0 11.6 8.0
6.5 12.1 8.5
7.0 12.6 9.0
7.5 13.1 9.5
8.0 13.6 10.0
8.5 14.1 10.5
9.0 14.6 11.0
9.5 15.1 11.5
10.5 16.1 12.5
11.5 17.1 13.5
25
26
28
29
30
32
33
34
35
36
40
42
45
50
53
12.0 17.6 14.0
12.5 18.1 14.5
13.5 19.1 15.5
14.0 19.6 16.0
14.5 20.1 16.5
15.5 21.1 17.5
16.0 21.6 18.0
16.5 22.1 18.5
17.0 22.6 19.0
17.5 23.1 19.5
19.5 25.1 21.5
20.5 26.1 22.5
22.0 27.6 24.0
24.5 30.1 26.5
26.0 31.6 28.0
26
28
29
30
32
33
34
35
36
40
42
45
50
53
10
11
12
13
14
15
16
17
18
19
20
22
24
10
11
12
13
14
15
16
17
18
19
20
22
24
0.5mm
Pitch
Top
Contact
Type
Even contact number
Odd contact number
No.1 contact
No.1 contact
A
0.1
A 0.1
0.8 0.1(Land)
0.8 0.1(Land)
0.65 0.05(Metal mask)
0.65 0.05(Metal mask)
0.5 0.05
0.35 0.03(FPC)
0.3 0.03(FFC)
0.3 0.05
0.5 0.05
0.5 0.05
0.6 0.1(Land)
0.6 0.1(Land)
1
1
0.05
0.05
1
1
0.05
0.05
0.5 0.05(Metal mask)
0.5 0.05(Metal mask)
1 0.05
0.5 0.1
A
B
0.05
0.07
B
0.05
B 0.05
1
0.05
0.5 0.1
Recommended metal mask thickness : 0.15mm
-Set the stiffener thickness to 0.188 (7.5mil) min.
Unit: mm
Unit: mm
0.5mm
Pitch
Vertical
Mountin
g Type
Dimension
Dimension
Dimension
Dimension
Number
A
B
Number
A
B
Number
A
B
Number
of Contacts
A
B
of Contacts
10
of Contacts
of Contacts
04.5 05.5
05.5 06.5
06.0 07.0
07.0 08.0
07.5 08.5
08.0 09.0
08.5 09.5
09.5 10.5
10.5 11.5
11.5 12.5
26
12.5 13.5
14.5 15.5
15.5 16.5
16.0 17.0
16.5 17.5
17.5 18.5
19.5 20.5
22.0 23.0
24.0 25.0
24.5 25.5
29.5 30.5
10
12
13
15
16
17
18
20
22
24
06.5 04.5
07.5 05.5
08.0 06.0
09.0 07.0
09.5 07.5
10.0 08.0
10.5 08.5
11.5 09.5
12.5 10.5
13.5 11.5
26
14.5 12.5
16.5 14.5
17.5 15.5
18.0 16.0
18.5 16.5
19.5 17.5
21.5 19.5
24.0 22.0
26.0 24.0
26.5 24.5
31.5 29.5
12
13
15
16
17
18
20
22
30
32
33
34
36
40
45
49
50
60
30
32
33
34
36
40
45
49
50
60
24
11
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■Recommended FPC/FFC dimensions and Land/Metal Mask dimensions
●1mm Pitch Product
FPC/FFC dimensions
Land / Metal Mask dimensions
Recommended metal mask thickness : 0.15mm
πSet the stiffener thickness to 0.188 (7.5mil) min.
1mm
Pitch
Bottom
Contact
Type
Unit: mm
Unit: mm
Dimension
Dimension
Dimension
Dimension
A
B
C
A
B
C
A
B
C
D
A
B
C
D
Number
Number
Number
Number
of Contacts
of Contacts
of Contacts
of Contacts
5
04
05
06
07
08
06
07
08
09
10
12
13
17
18
23
27
1
1
1
1
1
1
1
1
1
1
1
4
6
8
03 05.5 1.5
05 07.5 1.5
07 09.5 1.5
5
04 10.6 07 1.5
05 11.6 08 1.5
06 12.6 09 1.5
07 13.6 10 1.5
08 14.6 11 1.5
4
6
8
03 10.106.5
05 12.108.5
07 14.110.5
2
2
2
2
2
2
2
2
6
7
8
9
6
7
8
9
10 09 11.5 1.5
11 10 12.5 1.5
14 13 15.5 1.5
19 18 20.5 1.5
24 23 25.5 1.5
10 09 16.112.5
11 10 17.113.5
14 13 20.116.5
19 18 25.121.5
24 23 30.126.5
11 10
12 11
16 15
17 16
22 21
26 25
11 10 16.6 13 1.5
12 11 17.6 14 1.5
16 15 21.6 18 1.5
17 16 22.6 19 1.5
22 21 27.6 24 1.5
26 25 31.6 28 1.5
1mm
Pitch
Vertical
Mounting
Type
Recommended metal mask thickness : : 0.15mm
-Set the stiffener thickness to 0.188 (7.5mil) min.
Unit: mm
Unit: mm
Dimension
Dimension
Number
Number
A
B
A
B
of Contacts
of Contacts
6
7
8
16
20
22
24
05
06
07
15
19
21
23
07
08
09
17
21
23
25
6
7
8
16
20
22
24
08
09
10
18
22
24
26
05
06
07
15
19
21
23
12
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■Packaging Specification
Embossed Carrier Tape Dimensions
(
)
Horizontal Type Common to Bottom/Top Contact, 0.5mm/1mm Pitch
(
2.0
)
Flat surface for placement
with Automatic equipment
Reel Dimensions (Common to All Types)
(D : INSIDE)
End portion
Mounting portion
Lead portion (400mm min.)
Embossed carrier tape
Top cover tape
Blank portion
Blank portion
(10 pockets min.)
( E : OUTSIDE)
(10 pockets min.)
●0.5mm Pitch Bottom/Top Contact Type
Unit:mm
Dimension
Dimension
Number
A
B
C
D
E
Number
A
B
C
D
E
of Contacts
of Contacts
6
8
16
16
16
16
24
24
24
24
24
24
24
24
24
24
24
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
07.5
07.5
07.5
07.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
17.4
17.4
17.4
17.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
21.4
21.4
21.4
21.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
25
24
24
32
32
32
32
32
32
44
44
44
44
44
44
44
----------
----------
28.4
28.4
28.4
28.4
28.4
28.4
40.4
40.4
40.4
40.4
40.4
40.4
40.4
11.5
25.4
25.4
33.4
33.4
33.4
33.4
33.4
33.4
45.4
45.4
45.4
45.4
45.4
45.4
45.4
29.4
29.4
37.4
37.4
37.4
37.4
37.4
37.4
49.4
49.4
49.4
49.4
49.4
49.4
49.4
26
28
29
30
32
33
34
35
36
40
42
45
50
53
11.5
14.2
14.2
14.2
14.2
14.2
14.2
20.2
20.2
20.2
20.2
20.2
20.2
20.2
10
11
12
13
14
15
16
17
18
19
20
22
24
● 1mm Pitch Bottom Contact Type
Unit:mm
E
Dimension
Dimension
Number
A
B
C
D
E
Number
A
B
C
D
of Contacts
of Contacts
5
6
7
8
9
11
12
16
17
22
26
16
24
24
24
24
24
24
32
44
44
44
----------
----------
----------
----------
----------
----------
----------
28.4
07.5
11.5
11.5
11.5
11.5
11.5
11.5
14.2
20.2
20.2
20.2
17.4
25.4
25.4
25.4
25.4
25.4
25.4
33.4
45.4
45.4
45.4
21.4
29.4
29.4
29.4
29.4
29.4
29.4
37.4
49.4
49.4
49.4
4
6
8
10
11
14
19
24
16
24
24
24
24
32
44
44
----------
----------
----------
----------
----------
28.4
07.5
11.5
11.5
11.5
11.5
14.2
20.2
20.2
17.4
25.4
25.4
25.4
25.4
33.4
45.4
45.4
21.4
29.4
29.4
29.4
29.4
37.4
49.4
49.4
40.4
40.4
40.4
40.4
40.4
13
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
Vertical Mounting Type (Common to 0.5mm/1mm Pitch)
Flat surface for placement
with Automatic equipment
(1.75)
Reel Dimensions (Common to All Types)
(D : INSIDE)
End portion
Mounting portion
Lead portion (400mm min.)
Embossed carrier tape
Top cover tape
Blank portion
Blank portion
(10 pockets min.)
( E : OUTSIDE)
(10 pockets min.)
●0.5mm Pitch Vertical mounting Type
Unit:mm
Dimension
Dimension
A
B
C
D
E
A
B
C
D
E
Number
of Contacts
Number
of Contacts
10
12
13
15
16
17
18
20
22
24
16
16
24
24
24
24
24
24
24
24
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
07.5
07.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
17.4
17.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
21.4
21.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
26
24
32
32
32
44
44
44
44
44
44
56
----------
28.4
28.4
28.4
40.4
40.4
40.4
40.4
40.4
40.4
52.4
11.5
14.2
14.2
14.2
20.2
20.2
20.2
20.2
20.2
20.2
26.2
25.4
33.4
33.4
33.4
45.4
45.4
45.4
45.4
45.4
45.4
57.4
29.4
37.4
37.4
37.4
49.4
49.4
49.4
49.4
49.4
49.4
61.4
30
32
33
34
36
40
45
49
50
60
Unit:mm
E
●1mm Pitch Vertical mounting Type
Dimension
A
B
C
D
Number
of Contacts
6
7
24
24
24
32
44
44
44
----------
----------
----------
28.4
11.5
11.5
11.5
14.2
20.2
20.2
20.2
25.4
25.4
25.4
33.4
45.4
45.4
45.4
29.4
29.4
29.4
37.4
49.4
49.4
49.4
8
16
20
22
24
40.4
40.4
40.4
14
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■FH12 Series FPC/FFC Construction (Recommended Specifications)
1. FFC
FFC : Flexible Flat Cable
Material Name
Polyester film
Material
Thickness (μm)
(12)
(30)
35
Adhesive
(Nickel under plated / Gold plated),
soft copper film
Thermoplastic polyester
Polyester type
Adhesive
Polyester
Adhesive
Stiffener
30
12
Polyester type
Polyester type
Total
30
188 (Note)
295
-Real tolerance of thickness dimension is on the order of 20 μm (275 to 315 μm)
Note: Use of a thicker FFC results in a stiffer lock action and the lock is more easily released.
A factor that contributes to thicker FFC is the use of 250 μm stiffener which is thicker than the standard (188 μm)
product. This results in a total thickness of 357 μm.
When using FFC, control of FFC thickness becomes easy if you indicate to us the thickness of the stiffener.
2. FPC
FPC : Flexible Printed Circuit
Material Name
Covering layer film
Cover adhesive
Material
Thickness (μm)
(25)
Polyimide 1 mil
(25)
Nickel under plated 1to 5μm /
Gold plated 0.2μm
Surꢀace treatmenta
3
Copper foil
Base adhesive
Base film
Cu
1oz
35
25
Heat-hardened adhesive
Polyimide 1 mil
25
Reinforcement material adhesive Heat-hardened adhesive
30
Stiffener
Polyimide 7 mil
Total
175
293
3. Precautions
1. This specification is a recommendation for the construction of the FH12 Series FPC and FFC (t=0.3 0.05).
2. For details about the construction, please contact the FPC/FFC manufacturers.
15
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■Recommended Temperature Profile
MAX 250ç
HRS test conditions
Solder method
:Reꢀlow, IR/hot air
:Room air
Solder composition :Paste,
96.5%Sn/3%Ag/0.5%Cu
250
Environment:
230ç
200
150
100
50
200ç
(Senju Metal Industry, Co.,
Ltd.’s
Part Number: M705F221CM5F
32F10.5)
150ç
Test board
:Glass epoxy
(ç)
40mm∞80mm∞1.6mm thick
:Top and bottom
contact type 0.3mm∞1.3mm
Land dimensions
Vertical mounting type
0.6mm 1.5mm
:Top and bottom contact type
∞
Metal mask
25ç
(60 seconds) 90 to 120 seconds
30 seconds
Soldering
0.25mm
thick
∞1.3mm∞0.15mm
Preheating
0
Vertical mounting type
Start
0.5mm
thick
∞1.5mm∞0.15mm
Time
This temperature proꢀile is based on the above
conditions.
In individual applications the actual temperature may
vary, depending on solder paste type,
volume/thickness and board size/thickness. Consult
your solder paste and equipment manuꢀacturer ꢀor
speciꢀic recommendations.
16
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■Connector Operating Instructions, precautions and recommendations
●Bottom Contact Type (common for 0.5mm/1mm Pitch)
Operation
Precautions
1) Avoid grasping the actuator with two fingers or
lifting the actuator with fingernail.
1. FPC/FFC Termination procedure.
Connector installed on the board.
1) Lift up the actuator. Use thumb or index finger.
2) Do not use a thin tool such as the tip of a
screwdriver to release the lock lever. Doing so
will cause deformation of the contacts.
3) Do not apply force in the direction of arrows A, B, or C
while the lock lever is open.
Doing so will cause the lock lever to become disen gaged,
or will damage the hook portion of the connector body.
2) Fully insert the FPC/FFC parallel to mounting
surface, with the exposed conductive traces
facing down.
4) When inserting the FPC/FFC, do not forcefully rub against
the surface beneath the connector insertion slot.
Doing so will result in the FPC/FFC forcefully striking the
contacts and this will cause contact deformation, peeling
of the FPC/FFC conductors, and other irregularities.
FPC/FFC conductive traces
5) Insert the FPC/FFC at the proper position of the connector
insertion slot, and insert perpendicularly with respect to the con-
nector. Improper insertion will cause continuity problems, disen-
gagement of the lock lever, and damage to the hook portion.
17
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
●Bottom Contact Type (common for 0.5mm/1mm Pitch)
Operation
Precautions
3) Rotate down the actuator until firmly closed.
It is critical that the inserted FPC/FFC is not
moved and remains fully inserted. Should the
FPC/FFC be moved, open the actuator and
repeat the process, starting with Step 1.
6) Partial insertion of the FPC/FFC, offset insertion,
and diagonal insertion will result in an unfavor-
able engagement of the lock lever in which the
lock lever is raised. To correct this, first remove
the FPC/FFC and then reinsert it. Forcing the
lock will damage the connector.
Stiffener
7) When locking, handle the FPC/FFC so that a
load is not applied to the FPC/FFC as would
occur by pulling the FPC/FFC, or lifting it, etc.
When a load is applied in the opposite direc-
tion to the rotational movement of the lock, an
excessive load will be applied and this will
cause connector damage.
2. FPC/FFC Removal
1) Lift up the actuator.
2) Carefully remove the FPC/FFC.
8) At the time of lock operation, application of
force such as that indicated by the arrows in
the diagrams below will cause the lock lever to
disengage. When the lock lever has become
disengaged, please exchange the entire con-
nector.
18
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
●Top Contact Type
Operation
Precautions
1) Avoid further lifting of the actuator once the lock has
been released. Doing so will cause the lock lever to
separate from the rotational shaft, and the lock lever
will become disengaged or the hook portion of the
connector body will be damaged.
1. FPC/FFC Termination procedure.
Connector installed on the board.
1) Lift up the actuator. Use thumb or index finger.
actuator
Rotational shaꢀt
2) Fully insert the FPC/FFC parallel to mounting
surface, with the exposed conductive traces
facing UP.
2) Avoid further pressing of the lock portion from
the locked condition when the FPC/FFC has
not yet been inserted. Doing so will cause the
lock lever to become disengaged from the
rotational shaft, and the hook portion of the
connector body will be damaged.
FPC/FFC conductive traces
Stiffener
3) Rotate down the actuator until firmly closed.
It is critical that the inserted FPC/FFC is not
moved and remains fully inserted. Should the
FPC/FFC be moved, open the actuator and
repeat the process, starting with Step 1
above.
3) Do not insert the FPC/FFC diagonally. D o i n g
so will result in the corners of the FPC/FFC
catching on the contacts and will cause defor-
mation of the contacts.
2. FPC/FFC Removal
1) Lift up the actuator.
2) Carefully remove the FPC/FFC.
4) When closing down the actuator apply equal
pressure to both sides of the actuator.
19
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
●Vertical Mounting type (common for 0.5 mm/1 mm pitch)
Operation
Precautions
1) Avoid forcing the actuator up or down without
the FPC/FFC inserted.
1. FPC/FFC Termination procedure.
Connector installed on the board.
1) Verify that the actuator is positioned upright.
If the actuator has rotated to the side, care-
fully rotate it upright.
Actuator upright
2) Do not attempt to open or over rotate an already
released actuator (refer to the diagram below).
These actions may damage the actuator.
2) Insert the FPC/FFC vertically in the connector
slot assuring that the conductive traces of the
FPC/FFC are facing away from the actuator.
FPC/FFC conductive traces
Stiffener
3) Do not insert the FPC/FFC diagonally. Doing so
will result in the corners of the FPC/FFC catching
on the contacts and will cause deformation of the
contacts.
3) Press down the actuator in the direction shown.
2. FPC/FFC Removal
Rotate the actuator upward and withdraw the FPC/FFC.
4) Do not press down vertically on the actuator when
the FPC/FFC already inserted, it needs to be rotat-
ed to engage the lock. Refer to the diagram below.
Doing so may cause actuator failure.
®
6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
+
+
http://www.hirose-connectors.com
The contents of this catalog are current as of date of 11/2013. Contents are subject to change without notice for the purpose of improvements.
20
相关型号:
FH12A-24S-0.5SH(55)
Card Edge Connector, 24 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, ROHS COMPLIANT
HRS
FH12A-26S-0.5SH(05)
Card Edge Connector, 26 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Eject Lever, Brown Insulator
HRS
FH12A-26S-0.5SH(54)
Card Edge Connector, 26 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH12A-28S-0.5SH(54)
Card Edge Connector, 28 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH12A-28S-0.5SH(55)
Card Edge Connector, 28 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, ROHS COMPLIANT
HRS
FH12A-29S-0.5SH(05)
Card Edge Connector, 29 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Eject Lever, Brown Insulator
HRS
FH12A-29S-0.5SH(54)
Card Edge Connector, 29 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
FH12A-30S-0.5SH(54)
Card Edge Connector, 30 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
©2020 ICPDF网 联系我们和版权申明