FH12-20S-0.5SV(1)(98) [HRS]
Card Edge Connector,;型号: | FH12-20S-0.5SV(1)(98) |
厂家: | HRS |
描述: | Card Edge Connector, PC 连接器 |
文件: | 总20页 (文件大小:798K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
0.5mm and 1mm Pitch FPC/FFC Connectors
FH12 Series
■Features
Rotating one-touch ZIF mechanism
1. Rotating one-touch ZIF mechanism
The one-touch rotating ZIF mechanism is easier
to operate and works with a light force.
q
2. Clear tactile click
A clear tactile click is delivered upon the
successful completion of the mating process
3. Supports high density mounting
The FH12’s one-touch ZIF system requires less
space than a slide locking connector and can be
mounted in the center of the PCB.
4. Top & Bottom Contact and Vertical
Mount type
w
There are three connection types available : top
contact, bottom contact and a Vertical mount.
5. 1mm pitch product
Contact surface of the FPC+FFC
In addition to the 0.5mm pitch connector, we also
offer a 1mm pitch connector.
6. Reinforced actuator
The FH12S version in 30, 40, 45, 50, and 53 pin
counts are offered with a reinforced actuator that
provides an extra measure of security against
actuator breakage.
e
1
2017.1③
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■Product Specifications
Current rating : 0.5A DC(Note 1) Operating Temperature Range : _40 to +85ç (Note 2) Storage Temperature Range : _10 to +50ç (Note 3)
Voltage rating : 50V AC Operating Humidity Range : Relative humidity, 90% max. Storage Humidity Range : Relative humidity, 90% max.
Rating
(Not dewed)
Gold
(Not dewed)
Adaptive FPC/FFC contact specifications
t=0.3 0.05
plated
Item
Specification
Conditions
1. Insulation resistance 500Mø minimum
100V DC
2. Withstanding voltage No flashover or insulation breakdown.
150V AC/1 minute
1mA
3. Contact resistance
50mø maximum
Contact resistance : 50mø maximum
No damage, cracks, or parts dislocation.
4. Durability (Insertion/withdrawal)
20 cycles
No electrical discontinuity of 1μs or more
Contact resistance : 50mø maximum.
No damage, cracks, or parts dislocation.
Frequency : 10 to 55Hz, single amplitude of 0.75mm,
for 10 cycles in 3 axial directions
5. Vibration
6. Shock
No electrical discontinuity of 1μs or more
Contact resistance : 50mø maximum.
No damage, cracks, or parts dislocation.
2
Acceleration of 981m/s , 6ms duaration,
sine half-wave waveform, 3 cycles in each of the 3 axis
Contact resistance : 50mø maximum.
7. Humidity(Steady state) Insulation resistance : 50Mø minimum.
No damage, cracks, or parts dislocation.
96 hours at 40ç and humidity of 90% to 95%
Contact resistance : 50mø maximum.
Temperature : -40ç / 15 to 35ç / 85ç / 15 to 35ç,
8. Temperature Cycle
Insulation resistance : 50Mø minimum.
No damage, cracks, or parts dislocation.
Time: 30 / 2 to 3 / 30 / 2 to 3(minutes)
5 cycles
No deformation of
components affecting performance.
Reflow : At the recommended temperature profile
Manual soldering : 350 10ç for 5 seconds
9.Resistance to Soldering heat
Note 1 : When passing the current through all of the contacts,use 70% of the current rating.
Note 2 : Includes temperature rise caused by current flow.
Note 3 : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers nonconducting condition of installed connectors in storage, shipment or during
transportation.
■Materials / Finish
Part
Material
Polyamide, LCP(60 pos.)
PPS
Finish
Remarks
UL94V-0
Color : Beige
Color : Dark brown
Gold plated
Insulator
Contact
Phosphor bronze
Brass
–––––––
Metal Fittings
Tin plated
■Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
**
FH 12 A - 10 (4) S A - 0.5 SH ( )
q
w
e
r
t
y
u
i
o
!
q Series Name : FH
w Series No. : 12
y Contact alignment : Single
u Eccentric direction :
e Blank : standard type
A : Top contact type
Blank : standard type
A : Eccentric type
S : Type with strengthed flip-lock actuator
r Standard type : Number of contacts
Eccentric type : Number of contacts in 0.5mm housing
t Standard type : Blank
i Contacts Pitch : 0.5mm, 1mm
o Contact type
SH
:
:
SMT horizontal mounting type
SMT vertical mounting type
SVA
Eccentric type : Number of contacts
! Plating specification
(54)
(55)
: Selective gold plated
: Gold plated
(1)(98) : Gold plated 500 pieces/reel
2
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■Series Configuration
Pitch
Bottom Contact Type
Top Contact Type
Vertical mounting Type
FPC/FFC conductive
surface(bottom side)
FPC/FFC conductive
surface
FH12- ** S-0.5SH
P.4
0.5mm
Number of contacts 6, 8, 10, 11, 12, 13,
14, 15, 16, 17, 18, 19,
20, 22, 24, 25, 26, 28,
30, 32, 33, 34, 35, 36,
40, 45, 50, 53
Type with Strengthened Lock Lever
P.6
P.7
FH12A- ** S-0.5SH
FH12- ** S-0.5SVA
Number of contacts 10, 12 ,15, 16, 18, 20,
22, 24, 26, 28, 29, 30,
32, 33, 34, 36, 40, 42,
45, 50
Number of contacts 6, 10, 12, 13, 15, 16,
17, 18, 20, 22, 24, 26,
30, 32, 33, 34, 36, 40,
45, 49, 50, 60
P.5
FH12S- ** S-0.5SH
Number of contacts 30, 40, 45, 50, 53
FPC/FFC conductive
surface(bottom side)
1mm
P.8
Standard FH12- ** S-1SH
Eccentric FH12- ** (**) SA-1SH
Standard
Number of contacts 5, 6, 7, 8, 9, 11,
12,16,17,22,26
P.9
FH12- ** S-1SVA
Eccentric
Number of contacts 6, 7, 8, 16, 20, 22,
24
Number of contacts 4, 6, 8, 10, 11,
14, 19, 24
3
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■0.5mm Pitch Bottom Contact Type
A
0.5
(0.2)
polarizing mark indicator
Number of Contacts indicator
B
C
D
4.6
5.6
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
Note 5 : If there is no problem with the connector height, we recommend the type with the strengthened Flip-
lock actuator (FH12S-*S-0.5SH). Standard type connector height : 2mm Connector height of type with
strengthened Flip-lock actuator : 2.4mm
Unit : mm
Part No.
HRS No.
No. of Contacts
A
B
C
D
6
2.5
06.1
07.1
08.1
08.6
09.1
09.6
10.1
10.6
11.1
11.6
12.1
12.6
13.1
14.1
15.1
15.6
16.1
17.1
18.1
19.1
19.6
20.1
20.6
21.1
23.1
25.6
28.1
29.6
7.1
3.57
FH12-6S-0.5SH(**)
FH12-8S-0.5SH(**)
586-0582-5 **
586-0744-5 **
8
3.5
8.1
4.57
10
11
12
13
14
15
16
17
18
19
20
22
24
25
26
28
30
32
33
34
35
36
40
45
50
53
4.5
9.1
5.57
FH12-10S-0.5SH(**) 586-0522-3 **
FH12-11S-0.5SH(**) 586-0600-5 **
FH12-12S-0.5SH(**) 586-0704-0 **
FH12-13S-0.5SH(**) 586-0549-0 **
FH12-14S-0.5SH(**) 586-0533-0 **
FH12-15S-0.5SH(**) 586-0523-6 **
FH12-16S-0.5SH(**) 586-0531-4 **
FH12-17S-0.5SH(**) 586-0606-1 **
FH12-18S-0.5SH(**) 586-0530-1 **
FH12-19S-0.5SH(**) 586-0534-2 **
FH12-20S-0.5SH(**) 586-0524-9 **
FH12-22S-0.5SH(**) 586-0532-7 **
FH12-24S-0.5SH(**) 586-0521-0 **
FH12-25S-0.5SH(**) 586-0692-3 **
FH12-26S-0.5SH(**) 586-0576-2 **
FH12-28S-0.5SH(**) 586-0612-4 **
FH12-30S-0.5SH(**) 586-0525-1 **
FH12-32S-0.5SH(**) 586-0681-7 **
FH12-33S-0.5SH(**) 586-0520-8 **
FH12-34S-0.5SH(**) 586-0617-8 **
FH12-35S-0.5SH(**) 586-0740-4 **
FH12-36S-0.5SH(**) 586-0526-4 **
FH12-40S-0.5SH(**) 586-0527-7 **
FH12-45S-0.5SH(**) 586-0528-0 **
FH12-50S-0.5SH(**) 586-0529-2 **
FH12-53S-0.5SH(**) 586-0595-7 **
5.0
9.6
6.07
5.5
10.1
10.6
11.1
11.6
12.1
12.6
13.1
13.6
14.1
15.1
16.1
16.6
17.1
18.1
19.1
20.1
20.6
21.1
21.6
22.1
24.1
26.6
29.1
30.6
6.57
6.0
7.07
6.5
7.57
7.0
8.07
7.5
8.57
8.0
9.07
8.5
9.57
9.0
10.07
10.57
11.57
12.57
13.07
13.57
14.57
15.57
16.57
17.07
17.57
18.07
18.57
20.57
23.07
25.57
27.07
9.5
10.5
11.5
12.0
12.5
13.5
14.5
15.5
16.0
16.5
17.0
17.5
19.5
22.0
24.5
26.0
5
Note
5
5
5
5
Note
Note
Note
Note
Note 1 : Embossed tape reel packaging (2,000 pcs/reel, 500 pcs/reel). Order by number of reels.
4
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■
0.5mm Pitch Bottom Contact Type with Strengthened Flip-lock Actuator
A
0.5
(0.2)
polarizing mark indicator
Number of Contacts indicator
B
C
D
4.6
5.6
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit : mm
Part No.
HRS No.
No. of Contacts
A
B
C
D
30
40
45
50
53
14.5
19.5
22.0
24.5
26.0
18.1
23.1
25.6
28.1
29.6
19.1
24.1
26.6
29.1
30.6
15.57
20.57
23.07
25.57
27.07
FH12S-30S-0.5SH(**) 586-0667-6 **
FH12S-40S-0.5SH(**) 586-0640-0 **
FH12S-45S-0.5SH(**) 586-0665-0 **
FH12S-50S-0.5SH(**) 586-0642-5 **
FH12S-53S-0.5SH(**) 586-0691-0 **
Note 1 : Embossed tape reel packaging (2,000 pcs/reel, 500 pcs/reel).
Order by number of reels.
5
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■0.5mm Pitch Top Contact Type
A
B
C
0.5
(
)
0.2
6.2
polarizing mark indicator
D
E
(
)
0.45
0.8
1.45
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit : mm
E
Part No.
HRS No.
No. of Contacts
A
B
C
D
FH12A-10S-0.5SH(**) 586-0550-9 **
FH12A-12S-0.5SH(**) 586-0696-4 **
FH12A-15S-0.5SH(**) 586-0551-1 **
FH12A-16S-0.5SH(**) 586-0552-4 **
FH12A-18S-0.5SH(**) 586-0553-7 **
FH12A-20S-0.5SH(**) 586-0554-0 **
FH12A-22S-0.5SH(**) 586-0686-0 **
FH12A-24S-0.5SH(**) 586-0555-2 **
FH12A-26S-0.5SH(**) 586-0663-5 **
FH12A-28S-0.5SH(**) 586-0725-0 **
FH12A-29S-0.5SH(**) 586-0585-3 **
FH12A-30S-0.5SH(**) 586-0556-5 **
FH12A-32S-0.5SH(**) 586-0687-3 **
FH12A-33S-0.5SH(**) 586-0570-6 **
FH12A-34S-0.5SH(**) 586-0670-0 **
FH12A-36S-0.5SH(**) 586-0662-2 **
FH12A-40S-0.5SH(**) 586-0557-8 **
FH12A-42S-0.5SH(**) 586-0698-0 **
FH12A-45S-0.5SH(**) 586-0558-0 **
FH12A-50S-0.5SH(**) 586-0559-3 **
10
12
15
16
18
20
22
24
26
28
29
30
32
33
34
36
40
42
45
50
9.1
8.35
4.5
9.5
5.57
10.1
11.6
12.1
13.1
14.1
15.1
16.1
17.1
18.1
18.6
19.1
20.1
20.6
21.1
22.1
24.1
25.1
26.6
29.1
9.35
5.5
10.5
12.0
12.5
13.5
14.5
15.5
16.5
17.5
18.5
19.0
19.5
20.5
21.0
21.5
22.5
24.5
25.5
27.0
29.5
6.57
10.85
11.35
12.35
13.35
14.35
15.35
16.35
17.35
17.85
18.35
19.35
19.85
20.35
21.35
23.35
24.35
25.85
28.35
7.0
8.07
7.5
8.57
8.5
9.57
9.5
10.57
11.57
12.57
13.57
14.57
15.07
15.57
16.57
17.07
17.57
18.57
20.57
21.57
23.07
25.57
10.5
11.5
12.5
13.5
14.0
14.5
15.5
16.0
16.5
17.5
19.5
20.5
22.0
24.5
Note 1 : Embossed tape reel packaging (2,000 pcs/reel).
Order by number of reels.
6
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■0.5mm Pitch Vertical mounting Type
(
)
0.2
1
(
)
0.15
1
F
(
)
4.25
(
A
B
)
1.75
0.5
C
D
E
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit : mm
Part No.
HRS No.
No. of Contacts
A
B
C
D
E
F
4
4
4
4
4
4
4
4
4
8
8
8
8
8
8
8
8
8
8
8
8
8
586-0756-4 54
586-0806-0 54
586-0757-7 54
586-0807-3 54
586-0808-6 54
586-0809-9 54
586-0810-8 54
586-0811-0 54
586-0812-3 54
586-0813-6 54
586-0814-9 54
586-0815-1 54
586-0750-8 54
586-0816-4 54
586-0818-0 54
586-0817-7 54
586-0819-2 54
586-0804-5 54
586-0820-1 54
586-0821-4 54
586-0805-8 54
586-0749-9 54
6
6.4
4.9
2.5
4.5
6.2
FH12-6S-0.5SVA(54)
FH12-10S-0.5SVA(54)
FH12-12S-0.5SVA(54)
FH12-13S-0.5SVA(54)
FH12-15S-0.5SVA(54)
FH12-16S-0.5SVA(54)
FH12-17S-0.5SVA(54)
FH12-18S-0.5SVA(54)
FH12-20S-0.5SVA(54)
FH12-22S-0.5SVA(54)
FH12-24S-0.5SVA(54)
FH12-26S-0.5SVA(54)
FH12-30S-0.5SVA(54)
FH12-32S-0.5SVA(54)
FH12-33S-0.5SVA(54)
FH12-34S-0.5SVA(54)
FH12-36S-0.5SVA(54)
FH12-40S-0.5SVA(54)
FH12-45S-0.5SVA(54)
FH12-49S-0.5SVA(54)
FH12-50S-0.5SVA(54)
FH12-60S-0.5SVA(54)
10
12
13
15
16
17
18
20
22
24
26
30
32
33
34
36
40
45
49
50
60
8.4
6.9
4.5
6.5
8.2
9.4
7.9
5.5
7.5
9.2
9.9
8.4
6.0
8.0
9.7
10.9
11.4
11.9
12.4
13.4
14.4
15.4
16.4
18.4
19.4
19.9
20.4
21.4
23.4
25.9
27.9
28.4
33.4
9.4
7.0
9.0
10.7
11.2
11.7
12.2
13.2
14.2
15.2
16.2
18.2
19.2
19.7
20.2
21.2
23.2
25.7
27.7
28.2
33.2
9.9
7.5
9.5
10.4
10.9
11.9
12.9
13.9
14.9
16.9
17.9
18.4
18.9
19.9
21.9
24.4
26.4
26.9
31.9
8.0
10.0
10.5
11.5
12.5
13.5
14.5
16.5
17.5
18.0
18.5
19.5
21.5
24.0
26.0
26.5
31.5
8.5
9.5
10.5
11.5
12.5
14.5
15.5
16.0
16.5
17.5
19.5
22.0
24.0
24.5
29.5
Note 1 : Embossed tape reel packaging (1,000 pcs/reel, 500 pcs/reel).
Order by number of reels.
7
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■1mm Pitch Type Bottom Contact Type
2.3
A
E
1.0
(0.2)
polarizing mark indicator
Number of Contacts indicator
B
C
D
4.6
5.6
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit : mm
Part No.
HRS No.
No. of Contacts
A
4
B
C
D
E
5
6
8.6
9.6
6.07
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.8
FH12-5S-1SH(**)
FH12-6S-1SH(**)
FH12-7S-1SH(**)
FH12-8S-1SH(**)
FH12-9S-1SH(**)
FH12-11S-1SH(**)
FH12-12S-1SH(**)
FH12-16S-1SH(**)
FH12-17S-1SH(**)
FH12-22S-1SH(**)
FH12-26S-1SH(**)
586-0591-6 **
586-0607-4 **
586-0535-5 **
586-0579-0 **
586-0540-5 **
586-0668-9 **
586-0741-7 **
586-0536-8 **
586-0739-5 **
586-0547-4 **
586-0592-9 **
5
9.6
10.6
11.6
12.6
13.6
15.6
16.6
20.6
21.6
26.6
30.6
9.1
7.07
7
6
10.6
11.6
12.6
14.6
15.6
19.6
20.6
25.6
29.6
8.1
8.07
8
7
9.07
9
8
10.07
12.07
13.07
17.07
18.07
23.07
27.07
5.57
11
12
16
17
22
26
4
10
11
15
16
21
25
3
FH12-10(4)SA-1SH(**) 586-0537-0 **
FH12-14(6)SA-1SH(**) 586-0538-3 **
FH12-18(8)SA-1SH(**) 586-0539-6 **
FH12-22(10)SA-1SH(**) 586-0541-8 **
FH12-24(11)SA-1SH(**) 586-0542-0 **
FH12-30(14)SA-1SH(**) 586-0543-3 **
FH12-40(19)SA-1SH(**) 586-0546-1 **
FH12-50(24)SA-1SH(**) 586-0548-7 **
6
5
10.1
12.1
14.1
15.1
18.1
23.1
28.1
11.1
13.1
15.1
16.1
19.1
24.1
29.1
7.57
8
7
9.57
10
11
14
19
24
9
11.57
12.57
15.57
20.57
25.57
10
13
18
23
Note 1 : Embossed tape reel packaging (2,000 pcs/reel, 500 pcs/reel).
Order by number of reels.
8
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
■1mm Pitch Vertical Mounting Type
(0.2)
2
(0.15)
2
F
(4.25)
(1.75)
A
B
1.0
( )
3.8 Metal fitting dimension
C
D
E
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit : mm
Part No.
HRS No.
No. of Contacts
A
B
C
5
D
8
E
F
4
4
4
8
8
8
8
586-0822-0 54
586-0823-0 54
586-0824-0 54
586-0825-0 54
586-0826-0 54
586-0827-0 54
586-0828-0 54
6
7
9.9
8.4
9.7
FH12-06S-1SVA(54)
FH12-07S-1SVA(54)
FH12-08S-1SVA(54)
FH12-16S-1SVA(54)
FH12-20S-1SVA(54)
FH12-22S-1SVA(54)
FH12-24S-1SVA(54)
10.9
11.9
19.9
23.9
25.9
27.9
9.4
6
9
10.7
11.7
19.7
23.7
25.7
27.7
8
10.4
18.4
22.4
24.4
26.4
7
10
18
22
24
26
16
20
22
24
15
19
21
23
Note 1 : Embossed tape reel packaging (1,000 pcs/reel, 500 pcs/reel).
Order by number of reels.
9
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
B
Recommended FPC/FFC dimensions and Land/Metal Mask dimensions
●0.5mm Pitch Product
FPC/FFC dimensions
Land / Metal Mask dimensions
B
C
0.1
0.1
0.3 0.05
0.5 0.05
0.35 0.03(FPC)
0.3 0.03(FFC)
0.5 0.1
A
B
0.05
0.07
0.3 0.03(Land)
0.5 0.1
0.5 0.05
0.25 0.03(Metal mask)
0.5mm
Pitch
A
0.05
*Set the stiffener thickness to 0.188 (7.5mil) min.
Bottom
Contact
Type
Recommended metal mask thickness : 0.15mm
Unit : mm
Unit : mm
Dimension
Dimension
Dimension
Dimension
Number
A
B
Number
A
B
A
B
C
A
B
C
Number
Number
of Contacts
6
of Contacts
of Contacts
of Contacts
2.5 3.5
3.5 4.5
4.5 5.5
5.0 6.0
5.5 6.5
6.0 7.0
6.5 7.5
7.0 8.0
7.5 8.5
8.0 9.0
8.5 9.5
9.0 10.0
9.5 10.5
10.5 11.5
11.5 12.5
25
12.0 13.0
12.5 13.5
13.5 14.5
14.0 15.0
14.5 15.5
15.5 16.5
16.0 17.0
16.5 17.5
17.0 18.0
17.5 18.5
19.5 20.5
20.5 21.5
22.0 23.0
24.5 25.5
26.0 27.0
6
8
2.5 8.1 4.5
3.5 9.1 5.5
4.5 10.1 6.5
5.0 10.6 7.0
5.5 11.1 7.5
6.0 11.6 8.0
6.5 12.1 8.5
7.0 12.6 9.0
7.5 13.1 9.5
8.0 13.6 10.0
8.5 14.1 10.5
9.0 14.6 11.0
9.5 15.1 11.5
10.5 16.1 12.5
11.5 17.1 13.5
25
26
28
29
30
32
33
34
35
36
40
42
45
50
53
12.0 17.6 14.0
12.5 18.1 14.5
13.5 19.1 15.5
14.0 19.6 16.0
14.5 20.1 16.5
15.5 21.1 17.5
16.0 21.6 18.0
16.5 22.1 18.5
17.0 22.6 19.0
17.5 23.1 19.5
19.5 25.1 21.5
20.5 26.1 22.5
22.0 27.6 24.0
24.5 30.1 26.5
26.0 31.6 28.0
8
26
28
29
30
32
33
34
35
36
40
42
45
50
53
10
11
12
13
14
15
16
17
18
19
20
22
24
10
11
12
13
14
15
16
17
18
19
20
22
24
0.5mm
Pitch
Top
Contact
Type
Even contact number
Odd contact number
No.1 contact
No.1 contact
A
0.1
A 0.1
0.8 0.1(Land)
0.8 0.1(Land)
0.65 0.05(Metal mask)
0.65 0.05(Metal mask)
0.5 0.05
0.35 0.03(FPC)
0.3 0.03(FFC)
0.3 0.05
0.5 0.05
0.5 0.05
0.6 0.1(Land)
0.6 0.1(Land)
1
1
0.05
0.05
1
1
0.05
0.05
0.5 0.05(Metal mask)
0.5 0.05(Metal mask)
1 0.05
0.5 0.1
A
B
0.05
0.07
B
0.05
B 0.05
1
0.05
0.5 0.1
Recommended metal mask thickness : 0.15mm
*Set the stiffener thickness to 0.188 (7.5mil) min.
Unit : mm
Unit : mm
0.5mm
Pitch
Vertical
Mountin
g Type
Dimension
Dimension
Dimension
Dimension
Number
A
B
Number
A
B
Number
A
B
Number
of Contacts
A
B
of Contacts
6
of Contacts
of Contacts
02.5 03.5
04.5 05.5
05.5 06.5
06.0 07.0
07.0 08.0
07.5 08.5
08.0 09.0
08.5 09.5
09.5 10.5
10.5 11.5
11.5 12.5
26
12.5 13.5
14.5 15.5
15.5 16.5
16.0 17.0
16.5 17.5
17.5 18.5
19.5 20.5
22.0 23.0
24.0 25.0
24.5 25.5
29.5 30.5
10
12
13
15
16
17
18
20
22
24
06.5 04.5
07.5 05.5
08.0 06.0
09.0 07.0
09.5 07.5
10.0 08.0
10.5 08.5
11.5 09.5
12.5 10.5
13.5 11.5
26
14.5 12.5
16.5 14.5
17.5 15.5
18.0 16.0
18.5 16.5
19.5 17.5
21.5 19.5
24.0 22.0
26.0 24.0
26.5 24.5
31.5 29.5
10
12
13
15
16
17
18
20
30
32
33
34
36
40
45
49
50
60
30
32
33
34
36
40
45
49
50
60
22
24
10
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
B
Recommended FPC/FFC dimensions and Land/Metal Mask dimensions
●1mm Pitch Product
FPC/FFC dimensions
Land / Metal Mask dimensions
Recommended metal mask thickness : 0.15mm
πSet the stiffener thickness to 0.188 (7.5mil) min.
1mm
Pitch
Bottom
Contact
Type
Unit : mm
Unit : mm
Dimension
Dimension
Dimension
Dimension
A
B
C
A
B
C
A
B
C
D
A
B
C
D
Number
Number
Number
Number
of Contacts
of Contacts
of Contacts
of Contacts
5
04
05
06
07
08
06
07
08
09
10
12
13
17
18
23
27
1
1
1
1
1
1
1
1
1
1
1
4
6
8
03 05.5 1.5
05 07.5 1.5
07 09.5 1.5
5
04 10.6 07 1.5
05 11.6 08 1.5
06 12.6 09 1.5
07 13.6 10 1.5
08 14.6 11 1.5
4
6
8
03 10.106.5
05 12.108.5
07 14.110.5
2
2
2
2
2
2
2
2
6
7
8
9
6
7
8
9
10 09 11.5 1.5
11 10 12.5 1.5
14 13 15.5 1.5
19 18 20.5 1.5
24 23 25.5 1.5
10 09 16.112.5
11 10 17.113.5
14 13 20.116.5
19 18 25.121.5
24 23 30.126.5
11 10
12 11
16 15
17 16
22 21
26 25
11 10 16.6 13 1.5
12 11 17.6 14 1.5
16 15 21.6 18 1.5
17 16 22.6 19 1.5
22 21 27.6 24 1.5
26 25 31.6 28 1.5
1mm
Pitch
Vertical
Mounting
Type
Recommended metal mask thickness : 0.15mm
*Set the stiffener thickness to 0.188 (7.5mil) min.
Unit : mm
Unit : mm
Dimension
Dimension
Number
Number
A
B
A
B
of Contacts
of Contacts
6
7
8
16
20
22
24
05
06
07
15
19
21
23
07
08
09
17
21
23
25
6
7
8
16
20
22
24
08
09
10
18
22
24
26
05
06
07
15
19
21
23
11
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
BPackaging Specification
Embossed Carrier Tape Dimensions
(
)
Horizontal Type Common to Bottom/Top Contact, 0.5mm/1mm Pitch
(
)
2.0
Flat surface for placement
with Automatic equipment
Reel Dimensions (Common to All Types)
(D : INSIDE)
End portion
Mounting portion
Lead portion (400mm min.)
Embossed carrier tape
Top cover tape
Blank portion
Blank portion
(10 pockets min.)
( E : OUTSIDE)
(10 pockets min.)
●0.5mm Pitch Bottom/Top Contact Type
Unit : mm
Dimension
Dimension
Number
A
B
C
D
E
Number
A
B
C
D
E
of Contacts
of Contacts
6
8
16
16
16
16
24
24
24
24
24
24
24
24
24
24
24
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
07.5
07.5
07.5
07.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
17.4
17.4
17.4
17.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
21.4
21.4
21.4
21.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
25
24
24
32
32
32
32
32
32
44
44
44
44
44
44
44
----------
----------
28.4
28.4
28.4
28.4
28.4
28.4
40.4
40.4
40.4
40.4
40.4
40.4
40.4
11.5
25.4
25.4
33.4
33.4
33.4
33.4
33.4
33.4
45.4
45.4
45.4
45.4
45.4
45.4
45.4
29.4
29.4
37.4
37.4
37.4
37.4
37.4
37.4
49.4
49.4
49.4
49.4
49.4
49.4
49.4
26
28
29
30
32
33
34
35
36
40
42
45
50
53
11.5
14.2
14.2
14.2
14.2
14.2
14.2
20.2
20.2
20.2
20.2
20.2
20.2
20.2
10
11
12
13
14
15
16
17
18
19
20
22
24
● 1mm Pitch Bottom Contact Type
Unit : mm
Dimension
Dimension
Number
A
B
C
D
E
Number
A
B
C
D
E
of Contacts
of Contacts
5
6
7
8
9
11
12
16
17
22
26
16
24
24
24
24
24
24
32
44
44
44
----------
----------
----------
----------
----------
----------
----------
28.4
07.5
11.5
11.5
11.5
11.5
11.5
11.5
14.2
20.2
20.2
20.2
17.4
25.4
25.4
25.4
25.4
25.4
25.4
33.4
45.4
45.4
45.4
21.4
29.4
29.4
29.4
29.4
29.4
29.4
37.4
49.4
49.4
49.4
4
6
8
10
11
14
19
24
16
24
24
24
24
32
44
44
----------
----------
----------
----------
----------
28.4
07.5
11.5
11.5
11.5
11.5
14.2
20.2
20.2
17.4
25.4
25.4
25.4
25.4
33.4
45.4
45.4
21.4
29.4
29.4
29.4
29.4
37.4
49.4
49.4
40.4
40.4
40.4
40.4
40.4
12
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
Vertical Mounting Type (Common to 0.5mm/1mm Pitch)
Flat surface for placement
with Automatic equipment
(1.75)
Reel Dimensions (Common to All Types)
(D : INSIDE)
End portion
Mounting portion
Lead portion (400mm min.)
Embossed carrier tape
Top cover tape
Blank portion
Blank portion
(10 pockets min.)
( E : OUTSIDE)
(10 pockets min.)
●0.5mm Pitch Vertical mounting Type
Unit : mm
Dimension
Dimension
A
B
C
D
E
A
B
C
D
E
Number
of Contacts
Number
of Contacts
6
16
16
16
24
24
24
24
24
24
24
24
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
07.5
07.5
07.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
17.4
17.4
17.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
21.4
21.4
21.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
26
24
32
32
32
44
44
44
44
44
44
56
----------
28.4
28.4
28.4
40.4
40.4
40.4
40.4
40.4
40.4
52.4
11.5
14.2
14.2
14.2
20.2
20.2
20.2
20.2
20.2
20.2
26.2
25.4
33.4
33.4
33.4
45.4
45.4
45.4
45.4
45.4
45.4
57.4
29.4
37.4
37.4
37.4
49.4
49.4
49.4
49.4
49.4
49.4
61.4
10
12
13
15
16
17
18
20
22
24
30
32
33
34
36
40
45
49
50
60
Unit : mm
E
●1mm Pitch Vertical mounting Type
Dimension
A
B
C
D
Number
of Contacts
6
7
24
24
24
32
44
44
44
----------
----------
----------
28.4
11.5
11.5
11.5
14.2
20.2
20.2
20.2
25.4
25.4
25.4
33.4
45.4
45.4
45.4
29.4
29.4
29.4
37.4
49.4
49.4
49.4
8
16
20
22
24
40.4
40.4
40.4
13
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
BFH12 Series FPC/FFC Construction (Recommended Specifications)
1. FFC
FFC : Flexible Flat Cable
Material Name
Polyester film
Material
Thickness (μm)
(12)
(30)
35
Adhesive
(Nickel under plated / Gold plated),
soft copper film
Thermoplastic polyester
Polyester type
Adhesive
Polyester
Adhesive
Stiffener
30
12
Polyester type
Polyester type
Total
30
188 (Note)
295
*Real tolerance of thickness dimension is on the order of 20μm (275 to 315μm)
Note : Use of a thicker FFC results in a stiffer lock action and the lock is more easily released.
A factor that contributes to thicker FFC is the use of 250μm stiffener which is thicker than the standard (188μm)
product. This results in a total thickness of 357μm.
When using FFC, control of FFC thickness becomes easy if you indicate to us the thickness of the stiffener.
FPC : Flexible Printed Circuit
2. FPC
Material Name
Covering layer film
Cover adhesive
Material
Thickness (μm)
(25)
Polyimide 1 mil
(25)
Nickel under plated 1to 5μm /
Gold plated 0.2μm
Surface treatmenta
3
Copper foil
Base adhesive
Base film
Cu
1oz
35
25
Heat-hardened adhesive
Polyimide 1 mil
25
Reinforcement material adhesive Heat-hardened adhesive
30
Stiffener
Polyimide 7 mil
Total
175
293
3. Precautions
1. This specification is a recommendation for the construction of the FH12 Series FPC and FFC (t=0.3 0.05).
2. For details about the construction, please contact the FPC/FFC manufacturers.
■Recommended Temperature Profile
MAX 250ç
HRS test conditions
Solder method
Environment
Solder composition : Paste, 96.5%Sn/3%Ag/0.5%Cu
(Senju Metal Industry, Co., Ltd.’s
Part Number: M705-221CM5-32-
10.5)
: Reflow, IR/hot air
: Room air
250
200
150
100
50
230ç
200ç
Test board
Land dimensions
: Glass epoxy 40mm∞80mm∞1.6mm thick
: Top and bottom
contact type 0.3mm∞1.3mm
150ç
(ç)
Vertical mounting type
0.6mm 1.5mm
: Top and bottom contact type
0.25mm 1.3mm 0.15mm thick
Vertical mounting type
0.5mm 1.5mm 0.15mm thick
∞
Metal mask
∞
∞
∞
∞
25ç
(60 seconds) 90 to 120 seconds
30 seconds
Preheating
Soldering
This temperature profile is based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and
board size/thickness. Consult your solder paste and
equipment manufacturer for specific recommendations.
0
Start
Time
14
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
BConnector Operating Instructions, precautions and recommendations
●Bottom Contact Type (common for 0.5mm/1mm Pitch)
Operation
Precautions
1) Avoid grasping the actuator with two fingers or
lifting the actuator with fingernail.
1. FPC/FFC Termination procedure.
Connector installed on the board.
1) Lift up the actuator. Use thumb or index finger.
2) Do not use a thin tool such as the tip of a
screwdriver to release the lock lever. Doing so
will cause deformation of the contacts.
3) Do not apply force in the direction of arrows A, B, or C
while the lock lever is open.
Doing so will cause the lock lever to become disen gaged,
or will damage the hook portion of the connector body.
2) Fully insert the FPC/FFC parallel to mounting
surface, with the exposed conductive traces
facing down.
4) When inserting the FPC/FFC, do not forcefully rub against
the surface beneath the connector insertion slot.
Doing so will result in the FPC/FFC forcefully striking the
contacts and this will cause contact deformation, peeling
of the FPC/FFC conductors, and other irregularities.
FPC/FFC conductive traces
5) Insert the FPC/FFC at the proper position of the connector
insertion slot, and insert perpendicularly with respect to the con-
nector. Improper insertion will cause continuity problems, disen-
gagement of the lock lever, and damage to the hook portion.
15
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
●Bottom Contact Type (common for 0.5mm/1mm Pitch)
Operation
Precautions
3) Rotate down the actuator until firmly closed.
It is critical that the inserted FPC/FFC is not
moved and remains fully inserted. Should the
FPC/FFC be moved, open the actuator and
repeat the process, starting with Step 1.
6) Partial insertion of the FPC/FFC, offset insertion,
and diagonal insertion will result in an unfavor-
able engagement of the lock lever in which the
lock lever is raised. To correct this, first remove
the FPC/FFC and then reinsert it. Forcing the
lock will damage the connector.
Stiffener
7) When locking, handle the FPC/FFC so that a
load is not applied to the FPC/FFC as would
occur by pulling the FPC/FFC, or lifting it, etc.
When a load is applied in the opposite direc-
tion to the rotational movement of the lock, an
excessive load will be applied and this will
cause connector damage.
2. FPC/FFC Removal
1) Lift up the actuator.
2) Carefully remove the FPC/FFC.
8) At the time of lock operation, application of
force such as that indicated by the arrows in
the diagrams below will cause the lock lever to
disengage. When the lock lever has become
disengaged, please exchange the entire con-
nector.
16
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
●Top Contact Type
Operation
Precautions
1) Avoid further lifting of the actuator once the lock has
been released. Doing so will cause the lock lever to
separate from the rotational shaft, and the lock lever
will become disengaged or the hook portion of the
connector body will be damaged.
1. FPC/FFC Termination procedure.
Connector installed on the board.
1) Lift up the actuator. Use thumb or index finger.
actuator
Rotational shaft
2) Fully insert the FPC/FFC parallel to mounting
surface, with the exposed conductive traces
facing UP.
2) Avoid further pressing of the lock portion from
the locked condition when the FPC/FFC has
not yet been inserted. Doing so will cause the
lock lever to become disengaged from the
rotational shaft, and the hook portion of the
connector body will be damaged.
FPC/FFC conductive traces
Stiffener
3) Rotate down the actuator until firmly closed.
It is critical that the inserted FPC/FFC is not
moved and remains fully inserted. Should the
FPC/FFC be moved, open the actuator and
repeat the process, starting with Step 1
above.
3) Do not insert the FPC/FFC diagonally. D o i n g
so will result in the corners of the FPC/FFC
catching on the contacts and will cause defor-
mation of the contacts.
2. FPC/FFC Removal
1) Lift up the actuator.
2) Carefully remove the FPC/FFC.
4) When closing down the actuator apply equal
pressure to both sides of the actuator.
17
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
●Vertical Mounting type (common for 0.5mm/1mm pitch)
Operation
Precautions
1) Avoid forcing the actuator up or down without
the FPC/FFC inserted.
1. FPC/FFC Termination procedure.
Connector installed on the board.
1) Verify that the actuator is positioned upright.
If the actuator has rotated to the side, care-
fully rotate it upright.
Actuator upright
2) Do not attempt to open or over rotate an already
released actuator (refer to the diagram below).
These actions may damage the actuator.
2) Insert the FPC/FFC vertically in the connector
slot assuring that the conductive traces of the
FPC/FFC are facing away from the actuator.
FPC/FFC conductive traces
Stiffener
3) Do not insert the FPC/FFC diagonally. Doing so
will result in the corners of the FPC/FFC catching
on the contacts and will cause deformation of the
contacts.
3) Press down the actuator in the direction shown.
2. FPC/FFC Removal
Rotate the actuator upward and withdraw the FPC/FFC.
4) Do not press down vertically on the actuator when
the FPC/FFC already inserted, it needs to be rotat-
ed to engage the lock. Refer to the diagram below.
Doing so may cause actuator failure.
18
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
MEMO:
19
FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 01/2017. Contents are subject to change without notice for the purpose of improvements.
20
相关型号:
FH12-20S-0.5SV(54)
Card Edge Connector, 20 Contact(s), 1 Row(s), Female, Straight, Surface Mount Terminal,
HRS
FH12-20S-0.5SV(55)
Card Edge Connector, 20 Contact(s), 1 Row(s), Female, Straight, 0.02 inch Pitch, Surface Mount Terminal, Eject Lever, Beige Insulator, ROHS COMPLIANT
HRS
FH12-20S-1SV(05)
Card Edge Connector, 20 Contact(s), 1 Row(s), Female, Straight, 0.039 inch Pitch, Surface Mount Terminal, Eject Lever, Brown Insulator
HRS
FH12-20S-1SV(55)
Card Edge Connector, 20 Contact(s), 1 Row(s), Female, Straight, Surface Mount Terminal, ROHS COMPLIANT
HRS
FH12-22(54)SA-1SH(54)
Card Edge Connector, 10 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal,
HRS
FH12-22S-0.5SH(05)
Card Edge Connector, 22 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Eject Lever, Brown Insulator
HRS
©2020 ICPDF网 联系我们和版权申明