FH12-17S-1SH [HRS]
0.5mm and 1mm Pitch Connectors For FPC/FFC; 0.5mm至1mm节距连接器对于FPC / FFC型号: | FH12-17S-1SH |
厂家: | HRS |
描述: | 0.5mm and 1mm Pitch Connectors For FPC/FFC |
文件: | 总20页 (文件大小:453K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
0.5mm and 1mm Pitch Connectors For FPC/FFC
FH12 Series
Flip-lock
ꢀFeatures
Rotating One-touch Mechanism
1. Ease of Use and Space Savings
q
Only one finger or 6.9N (Newtons) of force is required
to lock Hirose’s rotational actuator (flip-lock) as
compared to using 2 fingers and 39.2N to close a
FFC/FPC connector from our competition.
The Flip-Lock design also allows customers to place 2
or more connectors side by side as there is no need to
waste additional board space for a side latch.
2. Strengthened Flip-lock Actuator
The standard Flip-Lock requires only 2.0mm height
above the board. A strengthened lock lever is available
which only requires an additional 0.4mm.
w
3. Supports Thin FPC (0.18mm)
Hirose does not require double-sided FPC to have any
additional strengthening plate or stiffener and can
therefore support a thickness of as little as 0.18mm +/-
0.05.
4. Hirose Ensures Reliability
Hirose’s patented half tuning fork contacts maintain
the required normal force without relying on the
connector housing. With our competitor’s conventional
products the housing walls support the contact force,
which does not provide for long-term reliability.
e
5. Prevention of Solder Bridge
Excess solder cavity absorbs excessive solder and
avoids solder bridging.
6. Three different assembly types
FH12 is offered in Top & Bottom Contact and Vertical
Mount and offered in both a 0.5mm contact pitch as
well as a 1.0mm contact pitch (bottom contact only).
2010.9
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC
ꢀProduct Specifications
Current rating: 0.5A DC(Note 1) Operating Temperature Range:_40 to +85ç (Note 2) Storage Temperature Range:_10 to +50ç (Note 3)
Rating
Voltage rating: 50V AC
Operating Humidity Range:Relative humidity, 90% max. Storage Humidity Range:Relative humidity, 90% max.
(Not dewed)
(Not dewed)
Applicable FPC
Item
Gold
plated
t=0.3 0.05
t=0.18 0.05 ꢀor ꢁH12ꢁF-SF0.5SH
Conditions
Specification
1. Insulation resistance 500M ohms minimum
2. Withstanding voltage No ꢀlashover or insulation breakdown.
100V DC
150V AC/1 minute
1mA
3. Contact resistance
50m ohms maximum
Contact resistance: 50m ohms maximum
No damage, cracks, or parts dislocation.
4. Durability (Insertion/withdrawal)
20 cycles
No electrical discontinuity oꢀ 1µs or more
Contact resistance: 50m ohms maximum.
No damage, cracks, or parts dislocation.
ꢁrequency: 10 to 55 Hz, single amplitude oꢀ 0.75 mm,
2 hours in each oꢀ the 3 directions.
10 cycles
5. Vibration
6. Shock
No electrical discontinuity oꢀ 1µs or more
Contact resistance: 50m ohms maximum.
No damage, cracks, or parts dislocation.
2
Acceleration oꢀ 981 m/s , 6 ms duration,
sine halꢀFwave waveꢀorm, 3 cycles in each oꢀ the 3 axis.
Contact resistance: 50m ohms maximum.
7. Humidity(Steady state) Insulation resistance: 50M ohms minimum.
No damage, cracks, or parts dislocation.
96 hours at 40ç and humidity oꢀ 90% to 95%
Contact resistance: 50m ohms maximum.
Temperature: F40ç / 15 to 35ç / 85ç / 15 to 35ç,
8. Temperature Cycle
Insulation resistance: 50M ohms minimum.
No damage, cracks, or parts dislocation.
Time: 30 / 2 to 3 / 30 / 2 to 3(minutes)
5 cycles
No deꢀormation oꢀ
components aꢀꢀecting perꢀormance.
Reꢀlow: At the recommended temperature proꢀile
Manual soldering: 350 10ç ꢀor 5 seconds
9.Resistance to Soldering heat
Note 1: When passing the current through all oꢀ the contacts,use 70% oꢀ the current rating.
Note 2: Includes temperature rise caused by current ꢀlow.
Note 3: The term "storage" reꢀers to products stored ꢀor long period oꢀ time prior to mounting and use. Operating Temperature Range and
Humidity range covers nonconducting condition oꢀ installed connectors in storage, shipment or during transportation.
Note 4: Inꢀormation contained in this catalog represents general requirements ꢀor this Series.
Contact us ꢀor the drawings and speciꢀications ꢀor a speciꢀic part number shown.
ꢀMaterial
Part
Insulator
Actuator
Material
Polyamide, LCP(60 pos.)
PPS
Finish
Color : Beige
Color : Dark brown
Gold plated
Remarks
UL94V-0
Contact
Phosphor bronze
Brass
–––––––
Metal Fittings
Tin plated
ꢀOrdering Information
--
FH 12 A - 10 (4) - S A - 0.5 SH ( )
q
w
e
r
t
y
u
i
o
!
q Series Name
w Series No.
: FH
: 12
y Contact alignment: Single
u Eccentric direction:
e Blank : standard type
A : Top contact type
Blank : standard type
A : Eccentric type
S : Type with strengthed flip-lock actuator
F : Type with 0.18mm FPC End Thickness
r Standard type : Number of contacts
i Contacts Pitch : 0.5mm, 1mm
o Contact type
SH
SV
:
:
SMT horizontal mounting type
SMT vertical mounting type
Eccentric type
: Number of contacts in 0.5mm housing
t Standard type : Blank
Eccentric type : Number of contacts
! Plating specification
(54) : Selective gold plated
(55) : Gold plated
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC
ꢀSeries Configuration
Pitch
Bottom Contact Type
Top Contact Type
Vertical mounting Type
FPC conductive surface
(bottom side)
FPC conductive
surface
FH12- -- S-0.5SH
P.4
Number of contacts 6, 8, 10, 11, 12, 13,
14, 15, 16, 17, 18, 19,
20, 22, 24, 25, 26, 28,
30, 32, 33, 34, 35, 36,
40, 45, 50, 53
0.5mm
Type with Strengthened Lock Lever
P.5
FH12S- -- S-0.5SH
Number of contacts 30, 40, 45, 50, 53
Type with 0.18mm FPC End Thickness
P.7
P.8
FH12A- -- S-0.5SH
FH12- -- S-0.5SV
P.6
FH12F- -- S-0.5SH
Number of contacts 10, 12 ,15, 16, 18, 20, Number of contacts 10, 12, 13, 15, 16, 17,
22, 24, 26, 28, 29, 30,
Number of contacts 6, 8, 10, 12, 13, 14, 15,
18, 20, 22, 24, 26, 30,
32, 33, 34, 36, 40, 42,
32, 33, 34, 36, 40, 45,
45, 50
16, 18, 20, 22, 24, 25,
49, 50, 60
26, 28, 30, 32, 34, 36, 40
FPC conductive surface
(bottom side)
1mm
P.9
Standard FH12- -- S-1SH
Eccentric FH12- -- (--) SA-1SH
Standard
Number of contacts 5, 6, 7, 8, 9, 11,
12,16,17,22,26
P.10
FH12- -- S-1SV
Eccentric
Number of contacts 6, 7, 8, 16, 20, 22,
24
Number of contacts 4, 6, 8, 10, 11,
14, 19, 24
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC
A
ꢀ0.5mm Pitch Bottom Contact Type
0.5
(0.2)
Mated CrossFsectional Diagram
ꢁPC/ꢁꢁC Contact Surꢀace
(2.1)
(3.1)
(1.3)
B
C
D
4.6
5.6
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
Note 5 : If there is no problem with the connector height, we recommend the type with the strengthened Flip-
lock actuator (FH12S-*S-0.5SH). Standard type connector height: 2 mm Connector height of type with
strengthened Flip-lock actuator: 2.4 mm
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
D
6
2.5
06.1
07.1
08.1
08.6
09.1
09.6
10.1
10.6
11.1
11.6
12.1
12.6
13.1
14.1
15.1
15.6
16.1
17.1
18.1
19.1
19.6
20.1
20.6
21.1
23.1
25.6
28.1
29.6
7.1
3.57
FH12-6S-0.5SH(--)
FH12-8S-0.5SH(--)
586-0582-5---
586-0744-5---
8
3.5
8.1
4.57
10
11
12
13
14
15
16
17
18
19
20
22
24
25
26
28
30
32
33
34
35
36
40
45
50
53
4.5
9.1
5.57
FH12-10S-0.5SH(--) 586-0522-3---
FH12-11S-0.5SH(--) 586-0600-5---
FH12-12S-0.5SH(--) 586-0704-0---
FH12-13S-0.5SH(--) 586-0549-0---
FH12-14S-0.5SH(--) 586-0533-0---
FH12-15S-0.5SH(--) 586-0523-6---
FH12-16S-0.5SH(--) 586-0531-4---
FH12-17S-0.5SH(--) 586-0606-1---
FH12-18S-0.5SH(--) 586-0530-1---
FH12-19S-0.5SH(--) 586-0534-2---
FH12-20S-0.5SH(--) 586-0524-9---
FH12-22S-0.5SH(--) 586-0532-7---
FH12-24S-0.5SH(--) 586-0521-0---
FH12-25S-0.5SH(--) 586-0692-3---
FH12-26S-0.5SH(--) 586-0576-2---
FH12-28S-0.5SH(--) 586-0612-4---
FH12-30S-0.5SH(--) 586-0525-1---
FH12-32S-0.5SH(--) 586-0681-7---
FH12-33S-0.5SH(--) 586-0520-8---
FH12-34S-0.5SH(--) 586-0617-8---
FH12-35S-0.5SH(--) 586-0740-4---
FH12-36S-0.5SH(--) 586-0526-4---
FH12-40S-0.5SH(--) 586-0527-7---
FH12-45S-0.5SH(--) 586-0528-0---
FH12-50S-0.5SH(--) 586-0529-2---
FH12-53S-0.5SH(--) 586-0595-7---
5.0
9.6
6.07
5.5
10.1
10.6
11.1
11.6
12.1
12.6
13.1
13.6
14.1
15.1
16.1
16.6
17.1
18.1
19.1
20.1
20.6
21.1
21.6
22.1
24.1
26.6
29.1
30.6
6.57
6.0
7.07
6.5
7.57
7.0
8.07
7.5
8.57
8.0
9.07
8.5
9.57
9.0
10.07
10.57
11.57
12.57
13.07
13.57
14.57
15.57
16.57
17.07
17.57
18.07
18.57
20.57
23.07
25.57
27.07
9.5
10.5
11.5
12.0
12.5
13.5
14.5
15.5
16.0
16.5
17.0
17.5
19.5
22.0
24.5
26.0
5
Note
5
5
5
5
Note
Note
Note
Note
Note 1 : Embossed tape reel packaging (2,000 pieces/reel). Order by number of reels.
Note 2 : (**):Specification. Refer to ordering information.
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC
ꢀ0.5mm Pitch Bottom Contact Type with Strengthened Flip-lock Actuator
A
0.5
(
)
0.2
Mated CrossFsectional Diagram
(
)
2.1
ꢁPC/ꢁꢁC Contact Surꢀace
(
)
(
)
1.3
3.1
B
C
D
4.6
5.6
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
D
30
40
45
50
53
14.5
19.5
22.0
24.5
26.0
18.1
23.1
25.6
28.1
29.6
19.1
24.1
26.6
29.1
30.6
15.57
20.57
23.07
25.57
27.07
FH12S-30S-0.5SH(--) 586-0667-6---
FH12S-40S-0.5SH(--) 586-0640-0---
FH12S-45S-0.5SH(--) 586-0665-0---
FH12S-50S-0.5SH(--) 586-0642-5---
FH12S-53S-0.5SH(--) 586-0691-0---
Note 1 : Embossed tape reel packaging (2,000 pieces/reel).
Order by number of reels.
Note 2 : Indicates the specification. For details, please refer to the column "composition of product number".
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC
ꢀ0.5mm Pitch Bottom Contact Type with 0.18mm FPC End Thickness
A
Applicable FPC end thickness : 0.18 0.05
0.5
0.2
Mated CrossFsectional Diagram
(
)
(
)
2.15
ꢁPC Contact Surꢀace
(
)
(
)
3.15
1.25
B
C
D
4.6
5.6
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
D
ꢁH12ꢁF6SF0.5SH(--)
ꢁH12ꢁF8SF0.5SH(--)
586F0672F6F--
586F0738F2F--
6
2.5
6.1
7.1
3.57
8
3.5
7.1
8.1
4.57
ꢁH12ꢁF10SF0.5SH(--) 586F0709F4F--
ꢁH12ꢁF12SF0.5SH(--) 586F0653F1F--
ꢁH12ꢁF13SF0.5SH(--) 586F0629F7F--
ꢁH12ꢁF14SF0.5SH(--) 586F0655F7F--
ꢁH12ꢁF15SF0.5SH(--) 586F0680F4F--
ꢁH12ꢁF16SF0.5SH(--) 586F0673F9F--
ꢁH12ꢁF18SF0.5SH(--) 586F0626F9F--
ꢁH12ꢁF20SF0.5SH(--) 586F0636F2F--
ꢁH12ꢁF22SF0.5SH(--) 586F0630F6F--
ꢁH12ꢁF24SF0.5SH(--) 586F0632F1F--
ꢁH12ꢁF25SF0.5SH(--) 586F0733F9F--
ꢁH12ꢁF26SF0.5SH(--) 586F0627F1F--
ꢁH12ꢁF28SF0.5SH(--) 586F0643F8F--
ꢁH12ꢁF30SF0.5SH(--) 586F0628F4F--
ꢁH12ꢁF32SF0.5SH(--) 586F0705F3F--
ꢁH12ꢁF34SF0.5SH(--) 586F0677F0F--
ꢁH12ꢁF36SF0.5SH(--) 586F0656F0F--
ꢁH12ꢁF40SF0.5SH(--) 586F0635F0F--
10
12
13
14
15
16
18
20
22
24
25
26
28
30
32
34
36
40
4.5
8.1
9.1
5.57
5.5
9.1
10.1
10.6
11.1
11.6
12.1
13.1
14.1
15.1
16.1
16.6
17.1
18.1
19.1
20.1
21.1
22.1
24.1
6.57
6.0
9.6
7.07
6.5
10.1
10.6
11.1
12.1
13.1
14.1
15.1
15.6
16.1
17.1
18.1
19.1
20.1
21.1
23.1
7.57
7.0
8.07
7.5
8.57
8.5
9.57
9.5
10.57
11.57
12.57
13.07
13.57
14.57
15.57
16.57
17.57
18.57
20.57
10.5
11.5
12.0
12.5
13.5
14.5
15.5
16.5
17.5
19.5
Note 1 : Embossed tape reel packaging (2,000 pieces/reel).
Order by number of reels.
Note 2 : Indicates the specification. For details, please refer to the column "composition of product number".
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC
A
B
ꢀ0.5mm Pitch Top Contact Type
Mated CrossFsectional Diagram
C
0.5
(0.2)
(1.9)
ꢁPC/ꢁꢁC Contact Surꢀace
(1.45)
5
(5)
6.2
D
E
(0.45)
0.8
1.45
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
Note 5 : If there is no problem with the connector height, we recommend the type with the strengthened Flip-
lock actuator (FH12S-*S-0.5SH). Standard type connector height: 2 mm Connector height of type with
strengthened Flip-lock actuator: 2.4 mm
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
ꢁH12AF10SF0.5SH(--) 586F0550F9F--
ꢁH12AF12SF0.5SH(--) 586F0696F4F--
ꢁH12AF15SF0.5SH(--) 586F0551F1F--
ꢁH12AF16SF0.5SH(--) 586F0552F4F--
ꢁH12AF18SF0.5SH(--) 586F0553F7F--
ꢁH12AF20SF0.5SH(--) 586F0554F0F--
ꢁH12AF22SF0.5SH(--) 586F0686F0F--
ꢁH12AF24SF0.5SH(--) 586F0555F2F--
ꢁH12AF26SF0.5SH(--) 586F0663F5F--
ꢁH12AF28SF0.5SH(--) 586F0725F0F--
ꢁH12AF29SF0.5SH(--) 586F0585F3F--
ꢁH12AF30SF0.5SH(--) 586F0556F5F--
ꢁH12AF32SF0.5SH(--) 586F0687F3F--
ꢁH12AF33SF0.5SH(--) 586F0570F6F--
ꢁH12AF34SF0.5SH(--) 586F0670F0F--
ꢁH12AF36SF0.5SH(--) 586F0662F2F--
ꢁH12AF40SF0.5SH(--) 586F0557F8F--
ꢁH12AF42SF0.5SH(--) 586F0698F0F--
ꢁH12AF45SF0.5SH(--) 586F0558F0F--
ꢁH12AF50SF0.5SH(--) 586F0559F3F--
10
12
15
16
18
20
22
24
26
28
29
30
32
33
34
36
40
42
45
50
9.1
8.35
4.5
9.5
5.57
10.1
11.6
12.1
13.1
14.1
15.1
16.1
17.1
18.1
18.6
19.1
20.1
20.6
21.1
22.1
24.1
25.1
26.6
29.1
9.35
5.5
10.5
12.0
12.5
13.5
14.5
15.5
16.5
17.5
18.5
19.0
19.5
20.5
21.0
21.5
22.5
24.5
25.5
27.0
29.5
6.57
10.85
11.35
12.35
13.35
14.35
15.35
16.35
17.35
17.85
18.35
19.35
19.85
20.35
21.35
23.35
24.35
25.85
28.35
7.0
8.07
7.5
8.57
9.57
8.5
9.5
10.57
11.57
12.57
13.57
14.57
15.07
15.57
16.57
17.07
17.57
18.57
20.57
21.57
23.07
25.57
10.5
11.5
12.5
13.5
14.0
14.5
15.5
16.0
16.5
17.5
19.5
20.5
22.0
24.5
Note 1 : Embossed tape reel packaging (2,000 pieces/reel).
Order by number of reels.
Note 2 : (**):Specification. Refer to ordering information.
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC
ꢀ0.5mm Pitch Vertical mounting Type
Mated CrossFsectional Diagram
(
)
0.2
1
(
)
ꢁPC/ꢁꢁC Contact Surꢀace
0.15
1
0.5
2.5
0.5
ꢁ
(
)
4.25
(
A
B
)
1.75
0.5
C
D
E
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
4
4
4
4
4
4
4
4
8
8
8
8
8
8
8
8
8
8
8
8
8
10
12
13
15
16
17
18
20
22
24
26
30
32
33
34
36
40
45
49
50
60
8.4
6.9
4.5
6.5
8.2
ꢁH12F10SF0.5SV(--) 586F0560F2F--
ꢁH12F12SF0.5SV(--) 586F0615F2F--
ꢁH12F13SF0.5SV(--) 586F0575F0F--
ꢁH12F15SF0.5SV(--) 586F0561F5F--
ꢁH12F16SF0.5SV(--) 586F0572F1F--
ꢁH12F17SF0.5SV(--) 586F0601F8F--
ꢁH12F18SF0.5SV(--) 586F0573F4F--
ꢁH12F20SF0.5SV(--) 586F0562F8F--
ꢁH12F22SF0.5SV(--) 586F0589F4F--
ꢁH12F24SF0.5SV(--) 586F0563F0F--
ꢁH12F26SF0.5SV(--) 586F0664F8F--
ꢁH12F30SF0.5SV(--) 586F0564F3F--
ꢁH12F32SF0.5SV(--) 586F0699F2F--
ꢁH12F33SF0.5SV(--) 586F0565F6F--
ꢁH12F34SF0.5SV(--) 586F0706F6F--
ꢁH12F36SF0.5SV(--) 586F0641F2F--
ꢁH12F40SF0.5SV(--) 586F0566F9F--
ꢁH12F45SF0.5SV(--) 586F0567F1F--
ꢁH12F49SF0.5SV(--) 586F0602F0F--
ꢁH12F50SF0.5SV(--) 586F0568F4F--
ꢁH12F60SF0.5SV(--) 586F0735F4F--
9.4
7.9
5.5
7.5
9.2
9.9
8.4
6.0
8.0
9.7
10.9
11.4
11.9
12.4
13.4
14.4
15.4
16.4
18.4
19.4
19.9
20.4
21.4
23.4
25.9
27.9
28.4
33.4
9.4
7.0
9.0
10.7
11.2
11.7
12.2
13.2
14.2
15.2
16.2
18.2
19.2
19.7
20.2
21.2
23.2
25.7
27.7
28.2
33.2
9.9
7.5
9.5
10.4
10.9
11.9
12.9
13.9
14.9
16.9
17.9
18.4
18.9
19.9
21.9
24.4
26.4
26.9
31.9
8.0
10.0
10.5
11.5
12.5
13.5
14.5
16.5
17.5
18.0
18.5
19.5
21.5
24.0
26.0
26.5
31.5
8.5
9.5
10.5
11.5
12.5
14.5
15.5
16.0
16.5
17.5
19.5
22.0
24.0
24.5
29.5
Note 1 : Embossed tape reel packaging (1,000 pieces/reel).
Order by number of reels.
Note 2 : (**):Specification. Refer to ordering information.
8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC
ꢀ1mm Pitch Type Bottom Contact Type
2.3
A
E
1.0
(0.2)
Mated CrossFsectional Diagram
(2.1)
ꢁPC/ꢁꢁC Contact Surꢀace
(3.1)
(1.3)
B
C
D
4.6
5.6
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit:mm
Part Number
ꢁH12F5SF1SH(--)
ꢁH12F6SF1SH(--)
ꢁH12F7SF1SH(--)
ꢁH12F8SF1SH(--)
ꢁH12F9SF1SH(--)
ꢁH12F11SF1SH(--)
ꢁH12F12SF1SH(--)
ꢁH12F16SF1SH(--)
ꢁH12F17SF1SH(--)
ꢁH12F22SF1SH(--)
ꢁH12F26SF1SH(--)
CL No.
Number of Contacts
A
4
B
C
D
E
5
6
8.6
9.6
6.07
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.8
586F0591F6F--
586F0607F4F--
586F0535F5F--
586F0579F0F--
586F0540F5F--
586F0668F9F--
586F0741F7F--
586F0536F8F--
586F0739F5F--
586F0547F4F--
586F0592F9F--
5
9.6
10.6
11.6
12.6
13.6
15.6
16.6
20.6
21.6
26.6
30.6
9.1
7.07
7
6
10.6
11.6
12.6
14.6
15.6
19.6
20.6
25.6
29.6
8.1
8.07
8
7
9.07
9
8
10.07
12.07
13.07
17.07
18.07
23.07
27.07
5.57
11
12
16
17
22
26
4
10
11
15
16
21
25
3
ꢁH12F10(4)SAF1SH(--) 586F0537F0F--
ꢁH12F14(6)SAF1SH(--) 586F0538F3F--
ꢁH12F18(8)SAF1SH(--) 586F0539F6F--
ꢁH12F22(10)SAF1SH(--) 586F0541F8F--
ꢁH12F24(11)SAF1SH(--) 586F0542F0F--
ꢁH12F30(14)SAF1SH(--) 586F0543F3F--
ꢁH12F40(19)SAF1SH(--) 586F0546F1F--
ꢁH12F50(24)SAF1SH(--) 586F0548F7F--
6
5
10.1
12.1
14.1
15.1
18.1
23.1
28.1
11.1
13.1
15.1
16.1
19.1
24.1
29.1
7.57
8
7
9.57
10
11
14
19
24
9
11.57
12.57
15.57
20.57
25.57
10
13
18
23
Note 1: Embossed tape reel packaging (2,000 pieces/reel). Order by number of reels.
Note 2: The 1mm version of FH12 is constructed by loading every other contact into the 0.5mm housing.
When a housing designed for an odd number of 0.5mm pitch contacts is used; the spacing from the edge to the first contact on
either side is the same as the distance between each contact, 1.0mm. Hirose considers this design to be a standard-type 1.0mm
connector.
An eccentric-type connector using a housing designed for an even number of 0.5mm pitch contacts and consequently one side
has 1.5mm distance from the edge to the first contact. (See FPC/FFC dimensional drawing on page 19) The part number for the
eccentric type describes the size of the 0.5mm housing used and lists the number of 1.0mm pitch contacts in parentheses () as
shown in the above table.
9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC
ꢀ1mm Pitch Vertical Mounting Type
Mated CrossFsectional Diagram
ꢁPC/ꢁꢁC Contact Surꢀace
(0.2)
2
(0.15)
0.5 2.5 0.5
2
ꢁ
(4.25)
(1.75)
A
B
1.0
( )
3.8 Metal ꢀitting dimension
C
D
E
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
C
5
D
8
E
F
4
4
4
8
8
8
8
6
7
9.9
8.4
9.7
ꢁH12F6SF1SV(--)
ꢁH12F7SF1SV(--)
ꢁH12F8SF1SV(--)
586F0605F9F--
586F0610F9F--
586F0593F1F--
10.9
11.9
19.9
23.9
25.9
27.9
9.4
6
9
10.7
11.7
19.7
23.7
25.7
27.7
8
10.4
18.4
22.4
24.4
26.4
7
10
18
22
24
26
16
20
22
24
15
19
21
23
ꢁH12F16SF1SV(--) 586F0574F7F--
ꢁH12F20SF1SV(--) 586F0634F7F--
ꢁH12F22SF1SV(--) 586F0584F0F--
ꢁH12F24SF1SV(--) 586F0594F4F--
Note 1 : Embossed tape reel packaging (1,000 pieces/reel).
Order by number of reels.
Note 2 : (**):Specification. Refer to ordering information.
10
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC
ꢀRecommended FPC/FFC dimensions and Land/Metal Mask dimensions
ꢀ0.5mm Pitch Product
FPC/FFC dimensions
Land / Metal Mask dimensions
B
C
0.1
0.1
C
0.5 0.05
0.35 0.03(FPC)
0.3 0.03(FFC)
0.5 0.1
A
B
0.05
0.07
0.3 0.03(Land)
0.5 0.1
0.5 0.05
0.25 0.03(Metal mask)
A
0.05
Product Type
C Dimension
Types other than 0.3 0.05min
Recommended metal mask thickness : 0.15mm
those below
ꢁH12ꢁ
Stiꢀꢀener thickness should be 0.188 mm (7.5 mil) min
0.18 0.05
0.5mm Pitch
Bottom Contact
Type
Unit: mm
Unit: mm
Dimension
Dimension
Dimension
Dimension
Number
A
B
Number
A
B
A
B
C
A
B
C
Number
Number
of Contacts
of Contacts
of Contacts
of Contacts
6
8
2.5 3.5
3.5 4.5
4.5 5.5
5.0 6.0
5.5 6.5
6.0 7.0
6.5 7.5
7.0 8.0
7.5 8.5
8.0 9.0
8.5 9.5
9.0 10.0
9.5 10.5
10.5 11.5
11.5 12.5
25
12.0 13.0
12.5 13.5
13.5 14.5
14.0 15.0
14.5 15.5
15.5 16.5
16.0 17.0
16.5 17.5
17.0 18.0
17.5 18.5
19.5 20.5
20.5 21.5
22.0 23.0
24.5 25.5
26.0 27.0
6
8
2.5 8.1 4.5
3.5 9.1 5.5
4.5 10.1 6.5
5.0 10.6 7.0
5.5 11.1 7.5
6.0 11.6 8.0
6.5 12.1 8.5
7.0 12.6 9.0
7.5 13.1 9.5
8.0 13.6 10.0
8.5 14.1 10.5
9.0 14.6 11.0
9.5 15.1 11.5
10.5 16.1 12.5
11.5 17.1 13.5
25
26
28
29
30
32
33
34
35
36
40
42
45
50
53
12.0 17.6 14.0
12.5 18.1 14.5
13.5 19.1 15.5
14.0 19.6 16.0
14.5 20.1 16.5
15.5 21.1 17.5
16.0 21.6 18.0
16.5 22.1 18.5
17.0 22.6 19.0
17.5 23.1 19.5
19.5 25.1 21.5
20.5 26.1 22.5
22.0 27.6 24.0
24.5 30.1 26.5
26.0 31.6 28.0
26
28
29
30
32
33
34
35
36
40
42
45
50
53
10
11
12
13
14
15
16
17
18
19
20
22
24
10
11
12
13
14
15
16
17
18
19
20
22
24
0.5mm Pitch
Top Contact
Type
Even contact number
Odd contact number
No.1 contact
No.1 contact
A
0.1
A 0.1
0.8 0.1(Land)
0.8 0.1(Land)
0.65 0.05(Metal mask)
0.65 0.05(Metal mask)
0.5 0.05
0.35 0.03(FPC)
0.3 0.03(FFC)
0.3 0.05
0.5 0.05
0.5 0.05
0.6 0.1(Land)
0.6 0.1(Land)
1
1
0.05
0.05
1
1
0.05
0.05
0.5 0.05(Metal mask)
0.5 0.05(Metal mask)
1 0.05
0.5 0.1
A
B
0.05
0.07
B
0.05
B 0.05
1
0.05
0.5 0.1
Recommended metal mask thickness : 0.15mm
-Set the stiffener thickness to 0.188 (7.5mil) min.
Unit: mm
Unit: mm
0.5mm Pitch
Vertical
Mounting Type
Dimension
Dimension
Dimension
Dimension
Number
A
B
Number
A
B
Number
A
B
Number
of Contacts
A
B
of Contacts
10
of Contacts
of Contacts
04.5 05.5
05.5 06.5
06.0 07.0
07.0 08.0
07.5 08.5
08.0 09.0
08.5 09.5
09.5 10.5
10.5 11.5
11.5 12.5
26
12.5 13.5
14.5 15.5
15.5 16.5
16.0 17.0
16.5 17.5
17.5 18.5
19.5 20.5
22.0 23.0
24.0 25.0
24.5 25.5
29.5 30.5
10
12
13
15
16
17
18
20
22
24
06.5 04.5
07.5 05.5
08.0 06.0
09.0 07.0
09.5 07.5
10.0 08.0
10.5 08.5
11.5 09.5
12.5 10.5
13.5 11.5
26
14.5 12.5
16.5 14.5
17.5 15.5
18.0 16.0
18.5 16.5
19.5 17.5
21.5 19.5
24.0 22.0
26.0 24.0
26.5 24.5
31.5 29.5
12
13
15
16
17
18
20
22
30
32
33
34
36
40
45
49
50
60
30
32
33
34
36
40
45
49
50
60
24
11
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC
ꢀRecommended FPC/FFC dimensions and Land/Metal Mask dimensions
ꢀ1mm Pitch Product
FPC/FFC dimensions
Land / Metal Mask dimensions
Recommended metal mask thickness : 0.15mm
πSet the stiffener thickness to 0.188 (7.5mil) min.
Unit: mm
Unit: mm
1mm Pitch
Bottom Contact
Type
Dimension
Dimension
Dimension
Dimension
A
B
C
A
B
C
A
B
C
D
A
B
C
D
Number
Number
Number
Number
of Contacts
of Contacts
of Contacts
of Contacts
5
04
05
06
07
08
06
07
08
09
10
12
13
17
18
23
27
1
1
1
1
1
1
1
1
1
1
1
4
6
8
03 05.5 1.5
05 07.5 1.5
07 09.5 1.5
5
04 10.6 07 1.5
05 11.6 08 1.5
06 12.6 09 1.5
07 13.6 10 1.5
08 14.6 11 1.5
4
6
8
03 10.106.5
05 12.108.5
07 14.110.5
2
2
2
2
2
2
2
2
6
7
8
9
6
7
8
9
10 09 11.5 1.5
11 10 12.5 1.5
14 13 15.5 1.5
19 18 20.5 1.5
24 23 25.5 1.5
10 09 16.112.5
11 10 17.113.5
14 13 20.116.5
19 18 25.121.5
24 23 30.126.5
11 10
12 11
16 15
17 16
22 21
26 25
11 10 16.6 13 1.5
12 11 17.6 14 1.5
16 15 21.6 18 1.5
17 16 22.6 19 1.5
22 21 27.6 24 1.5
26 25 31.6 28 1.5
1mm Pitch
Vertical
Mounting Type
Recommended metal mask thickness : : 0.15mm
-Set the stiffener thickness to 0.188 (7.5mil) min.
Unit: mm
Unit: mm
Dimension
Dimension
Number
Number
A
B
A
B
of Contacts
of Contacts
6
7
8
16
20
22
24
05
06
07
15
19
21
23
07
08
09
17
21
23
25
6
7
8
16
20
22
24
08
09
10
18
22
24
26
05
06
07
15
19
21
23
12
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC
ꢀPackaging Specification
Embossed Carrier Tape Dimensions
(
)
Horizontal Type Common to Bottom/Top Contact, 0.5mm/1mm Pitch
(
)
2.0
Flat surface for placement
with Automatic equipment
Reel Dimensions (Common to All Types)
(D : INSIDE)
End portion
Mounting portion
Lead portion (400mm min.)
Embossed carrier tape
Top cover tape
Blank portion
Blank portion
( E : OUTSIDE)
(10 pockets min.)
(10 pockets min.)
ꢀ0.5mm Pitch Bottom/Top Contact Type
Unit:mm
Dimension
Dimension
Number
A
B
C
D
E
Number
A
B
C
D
E
of Contacts
of Contacts
6
8
16
16
16
16
24
24
24
24
24
24
24
24
24
24
24
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
07.5
07.5
07.5
07.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
17.4
17.4
17.4
17.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
21.4
21.4
21.4
21.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
25
24
24
32
32
32
32
32
32
44
44
44
44
44
44
44
----------
----------
28.4
28.4
28.4
28.4
28.4
28.4
40.4
40.4
40.4
40.4
40.4
40.4
40.4
11.5
11.5
14.2
14.2
14.2
14.2
14.2
14.2
20.2
20.2
20.2
20.2
20.2
20.2
20.2
25.4
25.4
33.4
33.4
33.4
33.4
33.4
33.4
45.4
45.4
45.4
45.4
45.4
45.4
45.4
29.4
29.4
37.4
37.4
37.4
37.4
37.4
37.4
49.4
49.4
49.4
49.4
49.4
49.4
49.4
26
28
29
30
32
33
34
35
36
40
42
45
50
53
10
11
12
13
14
15
16
17
18
19
20
22
24
Note: 2,000 pieces per reel.
ꢀ 1mm Pitch Bottom Contact Type
Unit:mm
E
Dimension
Dimension
Number
A
B
C
D
E
Number
A
B
C
D
of Contacts
of Contacts
5
6
7
8
9
11
12
16
17
22
26
16
24
24
24
24
24
24
32
44
44
44
----------
----------
----------
----------
----------
----------
----------
28.4
07.5
11.5
11.5
11.5
11.5
11.5
11.5
14.2
20.2
20.2
20.2
17.4
25.4
25.4
25.4
25.4
25.4
25.4
33.4
45.4
45.4
45.4
21.4
29.4
29.4
29.4
29.4
29.4
29.4
37.4
49.4
49.4
49.4
4
6
8
10
11
14
19
24
16
24
24
24
24
32
44
44
----------
----------
----------
----------
----------
28.4
07.5
11.5
11.5
11.5
11.5
14.2
20.2
20.2
17.4
25.4
25.4
25.4
25.4
33.4
45.4
45.4
21.4
29.4
29.4
29.4
29.4
37.4
49.4
49.4
40.4
40.4
40.4
40.4
40.4
Note: 2,000 pieces per reel.
13
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC
Vertical Mounting Type (Common to 0.5mm/1mm Pitch)
Flat surface for placement
with Automatic equipment
(1.75)
ꢀ0.5mm Pitch Vertical mounting Type
Unit:mm
E
Dimension
Dimension
A
B
C
D
E
A
B
C
D
Number
of Contacts
Number
of Contacts
10
12
13
15
16
17
18
20
22
24
16
16
24
24
24
24
24
24
24
24
----------
----------
----------
----------
----------
----------
----------
----------
----------
----------
07.5
07.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
17.4
17.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
21.4
21.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
26
24
32
32
32
44
44
44
44
44
44
56
----------
28.4
28.4
28.4
40.4
40.4
40.4
40.4
40.4
40.4
52.4
11.5
14.2
14.2
14.2
20.2
20.2
20.2
20.2
20.2
20.2
26.2
25.4
33.4
33.4
33.4
45.4
45.4
45.4
45.4
45.4
45.4
57.4
29.4
37.4
37.4
37.4
49.4
49.4
49.4
49.4
49.4
49.4
61.4
30
32
33
34
36
40
45
49
50
Note: 1,000 pieces per reel.
60
Unit:mm
E
ꢀ1mm Pitch Vertical mounting Type
Dimension
A
B
C
D
Number
of Contacts
6
7
24
24
24
32
44
44
44
----------
----------
----------
28.4
11.5
11.5
11.5
14.2
20.2
20.2
20.2
25.4
25.4
25.4
33.4
45.4
45.4
45.4
29.4
29.4
29.4
37.4
49.4
49.4
49.4
8
16
20
22
24
40.4
40.4
40.4
Note: 1,000 pieces per reel.
14
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC
ꢀFH12 Series FPC/FFC Construction (Recommended Specifications)
1. FFC
FFC : Flexible Flat Cable
Material Name
Material
Thickness (µm)
(12)
(30)
35
Polyester film
Adhesive
(Nickel under plated / Gold plated),
soft copper film
Thermoplastic polyester
Adhesive
Polyester
Adhesive
Stiffener
Polyester type
30
12
Polyester type
Polyester type
Total
30
188 (Note)
295
-Real tolerance of thickness dimension is on the order of 20 µm (275 to 315 µm)
Note: Use of a thicker FFC results in a stiffer lock action and the lock is more easily released.
A factor that contributes to thicker FFC is the use of 250 µm stiffener which is thicker than the standard (188 µm) product. This
results in a total thickness of 357 µm.
When using FFC, control of FFC thickness becomes easy if you indicate to us the thickness of the stiffener.
2. FPC
FPC : Flexible Printed Circuit
Material Name
Covering layer film
Cover adhesive
Material
Thickness (µm)
(25)
Polyimide 1 mil
(25)
Nickel under plated 1to 5µm /
Gold plated 0.2µm
Surꢀace treatmenta
3
Copper foil
Base adhesive
Base film
Cu
1oz
35
25
Heat-hardened adhesive
Polyimide 1 mil
25
Reinforcement material adhesive Heat-hardened adhesive
30
Stiffener
Polyimide 7 mil
Total
175
293
3. Precautions
1. This specification is a recommendation for the construction of the FH12 Series FPC and FFC (t=0.3 0.05).
2. For details about the construction, please contact the FPC/FFC manufacturers.
15
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC
ꢀRecommended Temperature Profile
MAX 250ç
HRS test conditions
Solder method
Environment:
Solder composition
:Reꢀlow, IR/hot air
:Room air
:Paste, 96.5%Sn/3%Ag/0.5%Cu
(Senju Metal Industry, Co., Ltd.’s
Part Number: M705F221CM5F32F10.5)
:Glass epoxy 40mm∞80mm∞1.6mm thick
:Top and bottom
contact type 0.3mm∞1.3mm
Vertical mounting type 0.6mm
:Top and bottom contact type
250
200
150
100
50
230ç
200ç
Test board
Land dimensions
150ç
∞1.5mm
(ç)
Metal mask
0.25mm
Vertical mounting type
0.5mm 1.5mm 0.15mm thick
∞1.3mm∞0.15mm thick
∞
∞
This temperature proꢀile is based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and board
size/thickness. Consult your solder paste and equipment
manuꢀacturer ꢀor speciꢀic recommendations.
25ç
(60 seconds) 90 to 120 seconds
30 seconds
0
60
120
Start
Preheating
Time
Soldering
16
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC
ꢀConnector Operating Instructions, precautions and recommendations
ꢀBottom Contact Type (common for 0.5mm/1mm Pitch)
Operation
Precautions
1) Avoid grasping the actuator with two fingers or lift-
ing the actuator with fingernail.
1. FPC/FFC Termination procedure.
Connector installed on the board.
1) Lift up the actuator. Use thumb or index finger.
2) Do not use a thin tool such as the tip of a screw-
driver to release the lock lever. Doing so will cause
deformation of the contacts.
3) Do not apply force in the direction of arrows A, B, or C
while the lock lever is open.
Doing so will cause the lock lever to become disen gaged,
or will damage the hook portion of the connector body.
2) Fully insert the FPC/FFC parallel to mounting sur-
face, with the exposed conductive traces facing
down.
4) When inserting the FPC/FFC, do not forcefully rub against
the surface beneath the connector insertion slot.
Doing so will result in the FPC/FFC forcefully striking the
contacts and this will cause contact deformation, peeling
of the FPC/FFC conductors, and other irregularities.
s
5) Insert the FPC/FFC at the proper position of the connector
insertion slot, and insert perpendicularly with respect to the con-
nector. Improper insertion will cause continuity problems, disen-
gagement of the lock lever, and damage to the hook portion.
17
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC
ꢀBottom Contact Type (common for 0.5mm/1mm Pitch)
Operation
Precautions
3) Rotate down the actuator until firmly closed.
It is critical that the inserted FPC/FFC is not moved
and remains fully inserted. Should the FPC/FFC be
moved, open the actuator and repeat the process,
starting with Step 1.
6) Partial insertion of the FPC/FFC, offset insertion, and
diagonal insertion will result in an unfavorable engage-
ment of the lock lever in which the lock lever is raised.
To correct this, first remove the FPC/FFC and then
reinsert it. Forcing the lock will damage the connector.
Stiffener
7) When locking, handle the FPC/FFC so that a load
is not applied to the FPC/FFC as would occur by
pulling the FPC/FFC, or lifting it, etc.
When a load is applied in the opposite direction to
the rotational movement of the lock, an excessive
load will be applied and this will cause connector
damage.
2. FPC/FFC Removal
1) Lift up the actuator.
2) Carefully remove the FPC/FFC.
8) At the time of lock operation, application of force
such as that indicated by the arrows in the dia-
grams below will cause the lock lever to disengage.
When the lock lever has become disengaged,
please exchange the entire connector.
18
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC
ꢀTop Contact Type
Operation
Precautions
1) Avoid further lifting of the lock lever once the lock has been
released. Doing so will cause the lock lever to separate
from the rotational shaft, and the lock lever will become dis-
engaged or the hook portion of the connector body will be
damage
1. FPC/FFC Termination procedure.
Connector installed on the board.
1) Lift up the actuator. Use thumb or index finger.
Lock lever
Rotational shaꢀt
2) Fully insert the FPC/FFC parallel to mounting sur-
face, with the exposed conductive traces facing
UP.
2) Avoid further pressing of the lock portion from the
locked condition when the FPC/FFC has not yet
been inserted. Doing so will cause the lock lever to
become disengaged from the rotational shaft, and
the hook portion of the connector body will be
damaged.
FPC/FFC conductive traces
Stiffener
3) Rotate down the actuator until firmly closed.
It is critical that the inserted FPC/FFC is not moved
and remains fully inserted. Should the FPC/FFC be
moved, open the actuator and repeat the process,
starting with Step 1 above.
3) Do not insert the FPC/FFC diagonally. Doing so will
result in the corners of the FPC/FFC catching on the
contacts and will cause deformation of the contacts.
2. FPC/FFC Removal
1) Lift up the actuator.
2) Carefully remove the FPC/FFC.
4) When closing down the actuator apply equal pres-
sure to both sides of the actuator.
19
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH12 Seriesꢀ0.5mm and 1mm Pitch Connectors For FPC/FFC
ꢀVertical Mounting Type (common for 0.5mm/1mm Pitch)
Operation
Precautions
1) Avoid forcing the actuator up or down without the
FPC/FFC inserted.
1. FPC/FFC Termination procedure.
Connector installed on the board.
1) Verify that the actuator is positioned upright. If the
actuator has rotated to the side, carefully rotate it
upright.
Actuator upright
2) Insert the FPC/FFC vertically in the connector slot
assuring that the conductive traces of the
FPC/FFC are facing away from the actuator.
2) Do not insert the FPC/FFC diagonally.
Doing so will result in the corners of the FPC/FFC
catching on the contacts and will cause deforma-
tion of the contacts.
FPC/FFC conductive traces
Stiffener
3) Press down the actuator in the direction shown.
2. FPC/FFC Removal
Rotate the actuator upward and withdraw the FPC/FFC.
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-5300, FAX: 81-3-3495-5230
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of 09/2010. Contents are subject to change without notice for the purpose of improvements.
20
相关型号:
FH12-18(55)SA-1SH(55)
Card Edge Connector, 8 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal,
HRS
FH12-18S-0.5SH(05)
Card Edge Connector, 18 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Eject Lever, Brown Insulator
HRS
FH12-18S-0.5SH(55)
Card Edge Connector, 18 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, ROHS COMPLIANT
HRS
FH12-18S-0.5SV(05)
Card Edge Connector, 18 Contact(s), 1 Row(s), Female, Straight, 0.02 inch Pitch, Surface Mount Terminal, Eject Lever, Brown Insulator,
HRS
FH12-18S-0.5SV(54)
Card Edge Connector, 18 Contact(s), 1 Row(s), Female, Straight, Surface Mount Terminal
HRS
FH12-18S-0.5SV(55)
Card Edge Connector, 18 Contact(s), 1 Row(s), Female, Straight, Surface Mount Terminal, ROHS COMPLIANT
HRS
©2020 ICPDF网 联系我们和版权申明