EZ-H12-MUE-1.0M [HRS]
Interconnection Device;
| 型号： | EZ-H12-MUE-1.0M |
| 厂家： | 
HRS |
| 描述： | Interconnection Device 瞄准线 连接器 |
| 文件： | 总4页 (文件大小：95K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Fiberoptic Connector for Surface Mount Optical Module
Patents pending
EZ Series
ꢀFeatures
Easy Insert / Extract mechanism
1.Surface mounted modular optical interfaces
These connectors are used with Modular Optical Interface
packaged in plastic housings.
Tool - Hold the plug
for insertion.
Recommended module manufacturers:
Oki Electric Industry Co., Ltd.
Sumitomo Electric Industries, Ltd.
Fujitsu Limited
Matsushita Electric Industrial Co., Ltd.
Tool - release side
(Note) Hirose Electric Co., Ltd. does not manufacture or sell optical
modules. Please contact module manufactures above about EZ
moudules.
2. Easy operation
Insert / Extract tool make it easy operation. (Fig1)
Advantages of EZ Connectors:
1
2
3
Reflow mounting are possible.
Molded package of module will be lowcast.
Easy to change the another side of connector.
Fig1
3.Polarized mating
Self – Guided design
User friendly self-guided and polarized mating design.
ꢀApplications
Lock
Optical modules with EZ interface.
Guide
Fig2
57
ꢀProduct Specifications
Ratings
Operating temperature range
-40°C to +85°C
Storage temperature range
-40°C to +85°C
Item
Test Method
Wavelength 1310nm (LD)
Specifications
Insertion Loss
Return Loss
0.5dB max.
40dB min.
Wavelength 1310nm (LD)
Insertion force
Measuremented with corresponding connector.
Insertion force : 19.6 N max.
Ferrule withdrawal force
Extract zirconia gauge 1.249 ±0.0005 mm dia from split sleeve. 0.98N to 3.5N
Durability
(cycles, mating/unmating)
30 times
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours in each of the 3 axis.
Vibration
Acceleration of 981 m/s2, 6 ms duration,
Shock
sine half-wave waveform, 10 cycles in each of the 3 axis.
1) Meets optical characteristic requirements.
2) No visible damage cracks or part dislocation.
Humidity
85°C, humidity: 85%
(Temperature/ humidity- cycles) Duration: 2000 hours
-40°C to +85°C
Change of Temperature
42 cycles
Dry Heat
Cold
2000 hours at 85°C
2000 hours at -40°C
Salt Mist
48 hours in a 5% concentration of salt mist
No significant corrosion.
Note: Specification above are under temperature 25°C@85% max. Humidity condition.
ꢀMaterials
Part
Material
Remarks
UL94V-0
-----
Plug housing
Spring
PPS
Steel or stainless steel
Copper alloy or Zirconia
Zirconia
Split sleeve
Ferrule
-----
-----
ꢀConnector Dimension
2.8+0.1
0
(13)
58
ꢀCable assembly – 0.9mm fiber
1. With SC connector
(35)
(13)
L+20
%
0
Part Number
CL No.
Fiber type
Polishing type
AdPC
Length
0.5m
1m
EZ-H12-SCE-0.5M
EZ-H12-SCE-1.0M
826-1008-6-01
826-1008-6-02
SM-9.5/125
SM-9.5/125
AdPC
2. With FC connector
(34.7)
(13)
L+20
%
0
Part Number
CL No.
Fiber type
SM-9.5/125
SM-9.5/125
Polishing type
AdPC
Length
0.5m
1m
EZ-H12-FCE-0.5M
EZ-H12-FCE-1.0M
826-1009-9-01
826-1009-9-02
AdPC
3. With MU connector
(13)
(30)
L+20
%
0
Part Number
CL No.
Fiber type
SM-9.5/125
SM-9.5/125
Polishing type
AdPC
Length
0.5m
1m
EZ-H12-MUE-0.5M
EZ-H12-MUE-1.0M
826-1010-8-01
826-1010-8-02
AdPC
ꢀStandard lengths are shown above. Please contact HRS for different cable length or another side of connector.
59
ꢀTools
EZ-T1-001
EZ-T1-001-H
Part Number
EZ-T1-001
CL No.
Remarks
826-0007-8
826-0009-3
Insertion and extraction tool
EZ-T1-001-H
Tip of the tool for replacement.
BHow to Use
1. Insertion
2. Extraction
Insertion and removal tool
- holding side
Insertion and removal tool - holding side
Lock
Insertion and removal tool
– disconnect side
2
1
1
3
Guide
3
4
2
q
Place the holding side of the tool over the EZ connector, in the direction
perpendicular to the cable axis. The cut-out should clear the cable.
q
Insert both pins of the tool (the release side) in the optical module side
as shown on Figure. This will deflect both sides of the lock and release
the EZ connector.
wMate the connector with the optical module until both sides of the
locking latches are fully and securely engaged. Confirm this visually.
Note that there is a slight feeling of spring compression.
eSlide the tool off the connector in upward direction.
w
e
Holding the EZ connector by hand slide it off the optical module.
Remove the tool from the optical module.
BUsage Precautions
1. When using the insertion/removal tool do not use excessive forces. The tool should operate freely.
2. Do not apply a pulling force of 4.9 N or greater to the cable.
3. Do not bend the cable at a radius of less than the recommended.
4. Use a ferrule tip cleaner of 0.125 mm diameter to clean the ferrule surface. Assure that there is no contamination
or any particles left after the cleaning.
60
相关型号：
©2020 ICPDF网 联系我们和版权申明