DF6-5P-3.96C [HRS]
3.96mm Pitch Connector Directly Mounted on Board; 3.96毫米间距连接器直接安装在主板
| 型号： | DF6-5P-3.96C |
| 厂家： | 
HRS |
| 描述： | 3.96mm Pitch Connector Directly Mounted on Board |
| 文件： | 总4页 (文件大小：140K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3.96mm Pitch Connector Directly Mounted on Board
DF6 Series
■Features
1. Service Efficiency Up
Conventional thick cables are directly mounted on the
board piece by piece, but connecterization has achieved
soldering services in a batch. This product enhances
soldering service efficiency.
2. Miniaturization
This product achieves miniaturization for thick cables.
Mounting height on board
Width
:
:
7.5mm
5.0mm
3. Board Prefixed Mechanism
Since the connector is softly press-fitted to the board for
insertion, it can be prefixed to the board.
Height: 7.5mm
width: 4.6mm
■Applications
Secondary power supply units for various equipment
Prefixed mechanism
B91
■Product Specifications
AWG 18 : 5A
Cable size AWG 20 : 4A
AWG 22 : 3A
Operating Temperature Range
Operating Moisture Range
Storage Temperature Range
Storage Humidity Range
-35 to +85ç (Note 1)
20 to 80%
Current rating
Rating
(Note 1)
-10 to +60ç (Note 2)
40 to 70% (Note 2)
Voltage rating
300V AC
Item
Specification
Condition
500V DC
1.Insulation Resistance 1000M ohms min.
2.Withstanding voltage
3.Contact Resistance
4.Vibration
No flashover or insulation breakdown.
15m ohms max.
No damage, cracks, or parts looseness.
1500V AC/1 minute
100mA
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-55ç: 30 minutes ■15 to 35ç: 10 minutes■85ç: 30 minutes■ 5 to 35ç: 10 minutes ) 5 cycles
Flow: 250ç for 10 seconds
5.Humidity (Steady state) No damage, cracks, or parts looseness.
6.Temperature Cycle No damage, cracks, or parts looseness.
7. Resistance to Soldering heat No deformation of components affecting performance.
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during
transportation.
■Material
Product
Part
Insulator
Brass
Material
Polyamide
Copper Alley
Finish
White
Remarks
Crimping Plug
UL94V-0
________
Crimping Contact for Plug
Tin plated
Note: HRS's tin plating process takes measures against whisker.
■Ordering Information
■Crimping Plug
DF6 - * P - 3.96 C
q
w
e
r
t
q Series Name
: DF 6
r Contact pitch: 3.96mm
t C: Crimping plug
w Number of contacts: 1~8, 10
e Connector type
P: Plug
■Crimping Contact
DF6A - 1822 PCF
q
w
e
q Applicable cable type
None: UL 1007
e Packaging type
PCF: Plug contact, reel packaging
SC: Plug contact, bag packaging
A: UL 1015
w Applicable cable size
1822: AWG#18~#22
B92
■Precrimping Plug
Photo: Contact Inserted
Part Number
DF6- 1P-3.96C
DF6- 2P-3.96C
DF6- 3P-3.96C
DF6- 4P-3.96C
DF6- 5P-3.96C
DF6- 6P-3.96C
DF6- 7P-3.96C
DF6- 8P-3.96C
DF6-10P-3.96C
CL No.
Number of Contacts
A
B
_____
546-0001-1
546-0002-4
546-0003-7
546-0004-0
546-0005-2
546-0006-5
546-0007-8
546-0008-0
546-0011-5
1
2
4.92
8.88
3.96
7.92
3
12.84
16.80
20.76
24.72
28.68
32.64
40.56
4
11.88
15.84
19.80
23.76
27.72
35.64
5
Contact View for Insertion
6
7
8
10
Note: A packaging quantity is delivered by the bag unit (100 pcs.).
■Crimping Contact
■Slip length
DF6-1822PC (F): 2.1mm to 2.6mm
DF6A-1822PC (F): 2.3mm to 2.8mm
■Applicable through-hole: 1.8 +0.15
0
Applicable Cable
Part Number
CL No.
Packaging Type
Quantity
A
B
C
UL style Jacket dia. AWG size Contact Construct
DF6 -1822PCF
DF6 -1822PC
DF6A-1822PCF
DF6A-1822PC
546-0009-3
546-0010-2
546-0013-0
546-0014-3
Reel
Bag
Reel
Bag
5,000
100
1007
1015
1.5 to 2.2mm AWG 18 34 cores/0.18mm
AWG 20 21 cores/0.18mm
10.2 1.5 1.2
10.5 1.7 1.4
3,000
100
2.2 to 2.9mm AWG 22 17 cores/0.16mm
Note 1. The applicable cable conductor is a tin plated and annealed copper wire.
Note 2. If other cables are used instead of the applicable cable, contact the Hirose Sales Department.
BApplicable Crimping Tools
TypeItem
Part Number
AP105-DF6-1822P
AP105-DF6A-1822P
CM-105
CL No.
Applicable Contact
DF6 -1822PCF
901-4505-9
901-4520-2
901-0005-4
550-0174-9
550-0222-0
550-0170-8
Applicator
Press unit
DF6A-1822PCF
________
DF6 -TA1822HC
DF6A-TA1822HC
DF-C-PO(A)
DF6 -1822PC
Manual crimping
tool
DF6A-1822PC
Extraction tool
DF6/DF6A-1822PC(F)
Note: If any trouble has been caused due to other tools, which are not designated by Hirose, Hirose never guarantee any products.
B93
BPrecautions
1.Recommended soldering
Flow: 250ç for 3 seconds
condition
Manual soldering: 290ç for 2 seconds
After soldering, if a load is given to the cable where connector and cable contain heat, the jacket holding
■
member will be loosened. After soldering, the operation should be performed, after connector returns to room
temperature.
2.Cleaning condition
Refer to the "Nylon Connector Use Hand book".
Don't use solvent to degrade the cable jacket like trichloroethane.
In addition, avoid heat cleaning with solvent.
3.Connecting condition
Refer to the "Nylon Connector Use Hand book".
B94
相关型号：
DF60-1P-10.16DSA(26)
Board Connector, 1 Contact(s), Straight, Solder Terminal, Locking, Black Insulator
HRS
DF60-2EP-10.16C
Board Connector, 2 Contact(s), Female, Straight, Crimp Terminal, Locking, Black Insulator, Plug
HRS
DF60-2P-10.16DSA(26)
Board Connector, 2 Contact(s), Straight, Solder Terminal, Locking, Black Insulator,
HRS
DF60-3EP-10.16C
Board Connector, 3 Contact(s), Female, Straight, Crimp Terminal, Locking, Black Insulator, Plug
HRS
DF60-4EP-10.16C
Board Connector, 4 Contact(s), Female, Straight, Crimp Terminal, Locking, Black Insulator, Plug
HRS
DF60-5EP-10.16C
Board Connector, 5 Contact(s), Female, Straight, Crimp Terminal, Locking, Black Insulator, Plug
HRS
©2020 ICPDF网 联系我们和版权申明