DF57-5S-1.2C [HRS]
Substrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source; 基板双人房(一对)电缆旋锁连接器的小尺寸电源型号: | DF57-5S-1.2C |
厂家: | HRS |
描述: | Substrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source |
文件: | 总8页 (文件大小:925K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
Substrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source
DF57 Series
Swing-Lock Structure explanatory drawing
Before mating
Lock portion
■Features
After mating
1.Reinforced lock structure with swing lock
A swing-lock structure, featuring our own unique connection
method, reinforces the lock structure of the electric cable
side, with a structure resistant to tough electric cable routing
Contact Structure
Two point contact terminals
and disengagement of cables under load.
In addition, the connection surface has a guide insertion to
facilitate insertability (patent pending)
Effective mating length
When connecting, the header connector secures the
0.42mm
molded-lance. Play of molded lance is prevented for added
strength.
3.Highly reliable contact structure
Despite the low-profile design, with a stacking height of
1.4mm, an effective mating length of 0.42mm is achieved. The
structure features two-point contact terminal geometry with
high contact reliability.
Cross-sectional view of the contact surface
4.Solder wicking prevention
The integral molding eliminates any gap between the
terminals and case to prevent solder wicking.
5.Case disengagement prevention
Reinforcing hardware (metal fittings) are integrated in the
molding, which help prevent the case from disengaging with
the terminals due to tough electric cable routing and load.
6.Cost countermeasure
Terminals and metal fittings are collectively integrated into the
molding to reduce assembly cost.
2010.9
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF57 Series●Substrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source
■Specifications
2pos.
2.5A
1.5A
3pos.
2.0A
1.5A
Operating temperature range -35ç to 85ç (Note 1)
Operating humidity range 20% to 80%
Current rating
AWG28
AWG30
Rating
Item
Storage temperature range -10ç to 60ç (Note 2)
Storage humidity range 40% to 70% (Note 2)
Voltage rating
50V AC/DC
Specification
Conditions
1.Insulation
resistance
1,000 Mø min.
100 V DC
2.Withstanding voltage No flashover or insulation breakdown
500 V AC / 1 minute
20 mV max., at 1 mA.
3.Contact resistance
4.Vibration
10 mø max.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
10 cycles, 3 direction
No electrical discontinuity of 1 μs or longer No
damage, cracks or parts dislocation.
2
Acceleration of 490 m/s , 11 ms duration, sine half-wave, 3
No electrical discontinuity of 1 μs or longer No
damage, cracks or parts dislocation.
5.Shock
cycles in each of the 3 axis
Contact resistance: 20 mø max., No damage,
Insertion resistance:500Mø min.
6.Humidity
96 hours at of 40 ±2ç, and humidity of 90 to 95%
cracks or parts dislocation.
Contact resistance: 20 mø max.,
-55°C → 5 to 35°C → 85°C → 5 to 35°C
Times: 30 min. → 3 min. → 2 min. to 3 min. → 30 min. →
2 min. to 3 min. 5 cycles
7.Temperature cycle
8.Durability
ø
Insulation resistance: 500 M min.
No damage, cracks or parts dislocation.
Contact resistance: 20 mø max.,
30 cycles
No damage, cracks or parts dislocation.
9.Resistance to
soldering heat
Reflow: At the recommended temperature profile Manual
soldering: 350°C for 3 seconds
No deformation of components affecting performance
Note 1. Includes temperature rise caused by current flow.
Note 2. The term "storage" refers to products stored for a long period prior to mounting and use.
The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or
during transportation.
Note 3. Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications
for a specific part number shown.
■Material
Product
Part
Material
LCP
Finish
Remarks
UL94V-0
---------
Insulator
Contacts
Insulator
Contacts
Color:Black
Tin Plated
Color:White
Tin Plated
Header
Brass
Crimp socket
PBT
UL94V-0
---------
Crimp contacts
Phosphor bronze
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF57 Series●Substrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source
■Ordering information
●Header
DF 57 − * P − 1.2 V
❶
❷
❸
❹
❺
❻
Series name : DF
Series No. : 57
Contact pitch:1.2mm
Termination section
V:Straight SMT
❶
❷
❸
❹
❺
❻
Number of contacts:2, 3, 4, 5, 6
Connector type P:Plug
●Crimp socket
DF 57 − * S − 1.2 C
❶
❷
❸
❹
❺
❻
Series name : DF
Series No. : 57
Contact pitch:1.2mm
Termination section
C:Crimp
❶
❷
❸
❹
❺
❻
Number of contacts:2, 3, 4, 5, 6
Connector type S: Crimp socket
●Contacts
DF 57 − 2830 SCF
❶
❷
Applicable conductor
Packaging
❷
❶
2830: AWG# 28 to AWG# 30
SCF: Female crimp contact / reel
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF57 Series●Substrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source
■Header(SMT)
A
B
Contact No.1
P=1.2
Vacum area
C
0.25
■ꢀRecommended PCB mounting
pattern(Thickness: 1.0mm)
B±0.05
1.2±0.05
0.6+0.05
[Specification number]
0
(21):Tin plated, Embossed tape
packaging (5,000 pieces per reel)
Unit : mm
Part Number
DF57-2P-1.2V(21)
DF57-3P-1.2V(21)
DF57-4P-1.2V(21)
DF57-5P-1.2V(21)
DF57-6P-1.2V(21)
CL No.
Number of contacts
A
B
C
666-0002-7-21
666-0003-0-21
666-0004-2-21
666-0010-5-21
666-0011-8-21
2
3
4
5
6
4.1
5.3
6.5
7.7
8.9
1.2
2.4
3.6
4.8
6.0
2.5
3.7
4.9
6.1
7.3
0.7 +0.05
0.8±0.05
0
Note:Embossed tape reel packaging (5,000 pieces/reel).
●Packaging Specification
4±0.1
4
DF57-2P-1.2V(21)
DF57-3P-1.2V(21)
E
2±0.1
E–E
5
E
D
D
D-D
DIRECTION OF UNREELING
4±0.1
2.125±0.3
(CENTER OF
VACUUM AREA)
G
4
2±0.1
DF57-4P-1.2V(21)
DF57-5P-1.2V(21)
DF57-6P-1.2V(21)
G-G
5
G
F
F
F-F
DIRECTION OF UNREELING
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF57 Series●Substrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source
■Crimp socket
A
B
1.2
Contact No.1 marking
C
D
P=1.2
Unit : mm
Part Number
DF57-2S-1.2C
DF57-3S-1.2C
DF57-4S-1.2C
DF57-5S-1.2C
DF57-6S-1.2C
CL No.
Number of contacts
A
B
C
D
[Packaging Specification]
Blank:1,000 pcs. per bag
666-0005-5-00
666-0006-8-00
666-0007-0-00
666-0008-3-00
666-0009-6-00
2
3
4
5
6
2.98
4.18
5.38
6.58
7.78
2.6
3.8
5.0
6.2
7.4
3.15
4.35
5.55
6.75
7.95
1.2
2.4
3.6
4.8
6.0
Note 1.The quantity is delivered per bag (1,000 pcs.). If needed, please select and order the products per bag.
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF57 Series●Substrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source
■Crimp contact
0.86
0.69
0.935
t=0.12
1
2.5
P=4
Part Number
DF57-2830SCF
CL No.
Packaging
Reel
Quantity
40,000
Finish
[Packaging Specification]
Blank:Embossed tape packaging
(40,000 pieces per reel)
666-0001-4-00
Tin plated
Note:Embossed tape reel packaging (40,000 pieces/reel).
Order by number of reels.
●Applicable wire (Tin plated annealed copper wire)
Recommended cable
●ꢀ
Wire size (Stranded wire conductor)
AWG28(7 / 0.127mm)
Jacket outer diameter
0.58mm
UL1571(Thin wire)
Strip length 1.0 to 1.4mm
●
AWG30(7 / 0.102mm)
0.56mm
Note: When using other than the recommended wire, contact your nearest
Hirose sales representative.
■Tools
Type
Part Number
AP105-DF57-2830S
CM-105
CL No.
Applicable contact
DF57-2830SCF
-----------
Applicator
CL901-4618-5-00
CL901-0005-4-00
Under development
CL550-0179-2-00
Press
Hand crimping tool
Contact extraction tool
HT305/DF57-2830S
DF-C-PO(B)
DF57-2830SCF
DF57-2830SCF
Note: If any trouble has occurred due to tools other than the designated tool, Hirose bears no
respoisibility for any trouble.
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF57 Series●Substrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source
■Usage Recommendations
1.Recommended temperature profile
10secMAX
MAX 250ç
250
220ç�
200
180ç
150
100
0
TIME (sec)
90~120sec
60secMAX
PRE-HEATING TIME SOLDERING TIME
The temperature profiles are based on the above conditions.
In individual applications the actual temperature may vary,depending on solder paste type,
volume/thickness and board size/thickness. Consult your solder paste and equipment
manufacturer for specific recommendations.
2.Recommended manual soldering
Manual soldering: 350ç ± 10ç for 3 seconds
3.Recommended screen thickness and open
area ratio (Pattern area ratio)
Thickness: 0.1 mm
Open area ratio: 100%
4.Board warpage
5.Cleaning conditions
6.Precautions
Maximum of 0.02mm at the connector center, with both ends of the connector as reference points.
Cleaning is not recommended. When cleaning, please evaluate as if can deteriorate the
performance including mechanical operation and environmental resistance.
ꢀ
When inserting crimp-type (solderless) terminals to crimping (solderless) sockets, to maintain
■ꢀ
reliable performance, please do not insert obliquely.
DO NOT mate/un-mate non-terminated plugs with non-mounted receptacles.
■ꢀ
This may lead to damage or deformation of the contacts.
Removal of the holding electric cable may cause damage so please be careful.
■
DO NOT apply flux to the contact terminals when hand soldering the receptacle to the board.
■ꢀ
Wicking of the flux into the electrical contact areas may lead to connection failures.
Slight discoloration on the insulating materials will not affect form, fit or function of the
■ꢀ
connectors.
For operating suggestions on insertion and removal, please refer separately to the "DF57
■ꢀ
Insertion and Removal Manual".
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF57 Series●Substrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source
7. Insertion and removal operation method
Mating
① Determine position, fitting the external form ② Insert the cable side
③ Push the contact portion side
Un-mating
① Engage lever
② Pull up and release the simple lock
③ The reinforced lock is also released and the
un-mating is complete
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-5300, FAX: 81-3-3495-5230
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of 09/2010. Contents are subject to change without notice for the purpose of improvements.
8
相关型号:
DF57-6P-1.2V(21)
Board Connector, 6 Contact(s), 1 Row(s), Male, Straight, Surface Mount Terminal, Plug
HRS
DF58-2P-1.2V(21)
Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply
HRS
DF58-3P-1.2V(21)
Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply
HRS
DF58-4P-1.2V(21)
Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply
HRS
©2020 ICPDF网 联系我们和版权申明