DF33-12RDS-3.3C [HRS]
3.3 mm Contact Pitch, Connectors for Internal Power Supplies; 3.3毫米接触间距,连接器内部电源型号: | DF33-12RDS-3.3C |
厂家: | HRS |
描述: | 3.3 mm Contact Pitch, Connectors for Internal Power Supplies |
文件: | 总8页 (文件大小:336K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
3.3 mm Contact Pitch, Connectors for Internal Power Supplies
DF33 Series
Complete
Locking
Function
Completely
enclosed
locking system
Protection from
shorts circuits
between adjacent
Contacts
■Features
Prevention of Incorrect Connections
1. 5 A maximum current
●Standard Type (Color: natural)
Single row connector can carry current of 5 A with #20 AWG
conductor. Please refer to Table #1 for current ratings for multi-
position connectors using other conductor sizes.
2. Complete Locking Function
Reliable interior lock protects mated connectors from
accidental disconnection.
3. Prevention of Incorrect Connections
To prevent incorrect connection when using multiple
connectors having the same Number of contacts, 3 product
types having different mating configurations are available.
●R Type (Color: black)
4. Prevention of incorrect board placement
Built-in posts assure correct connector placement and
orientation on the board.
5. Supports encapsulation
Connectors can be encapsulated up to 10 mm without affecting
the performance.
*The photographs on the left show header (the board dip side),
the photographs on the right show the socket (cable side).
*The guide key position is indicated in position facing
the mating surface of the header.
6. Prevention of Short Circuits Between
Adjacent Contacts
Each Contact is completely surrounded by the insulator
housing electrically isolating it from adjacent contacts.
7. Increased Retention Force of Crimped
Contacts and confirmation of complete
contact insertion
Separate contact retainers are provided for applications where
extreme pull-out forces may be applied against the wire or
when a visual confirmation of the full contact insertion is
required.
■Applications
Office equipment, power supplies for industrial, medical and
instrumentation applications, variety of consumer electronic, and
electrical applications.
B138
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF33 Series●3.3 mm Contact Pitch, Connectors for Internal Power Supplies
■Product Specifications
Number of rows
Number of contacts
2 to 6
AWG20
5A
AWG22
5A
Operating temperature range
Operating humidity range
-35ç to 85ç (Note 1)
Current
rating
1
2
40% to 80%
Ratings
4 to 12
5A
4A
Storage temperature range
Storage humidity range
-10ç to 60ç (Note 2)
Voltage
rating
AC/DC
500V
40% to 70% (Note 2)
Item
Specification
Condition
1. Contact resistance
2. Insulator resistance
3. Withstanding voltage
Contact resistance(Initial value): 10 m ohms max. 20mV max., 1mA
1000 M ohms min.
500 V DC
1500 V AC for 1 minute
No flashover or Insulator breakdown
4. Insertion-Extraction force (per contact) 0.5N min., 4.5N max.
Measured with a steel pin of 0.5 x 0.5 0.002 thickness
30 cycles
5. Durability (mating/unmating) Contact resistance of 20 m ohms max.
6. Vibration
No electrical discontinuity of 1 μs. min.
No electrical discontinuity of 1 μs. min.
Contact resistance 20 m ohms max.
Contact resistance of 20 m ohms max.
Frequency 10 to 55 Hz, single amplitude of 0.75 mm, 3 axis, duration of 2 hours
2
7. Shock
Acceleration of 490 m/s , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis.
8. Humidity
Temperature 40ç 2ç, 90% to 95% RH, 96 hours
9. Temperature cycle
(-55ç: 30 minutes➝ 5 to 35ç: 5 minutes➝85ç: 30 minutes➝5 to 35ç: 5 minutes) for 5 cycles
Flow solder temperature 260ç, for 10 seconds
Manual soldering: Soldering iron temperature 320ç, 3 seconds
10. Resistance to Soldering heat
No deformation of the insulator parts affecting performance
Note 1: Includes temperature rise caused by the current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity
range covers non- conducting condition of installed connectors in storage, shipment or during transportation.
■Materials
Product
Part
Material
Polyamide
Finish
Color: Natural white
Tin plated
Remarks
UL94V-0
----------
Sockets
Insulator
Contacts
Insulator
Contacts
Insulator
(Note 1)
(Note 2)
(Note 1)
(Note 2)
Crimp contacts
Copper alloy
Polyamide (Glass reinforced)
Copper alloy
Color: Natural beige
Tin plated
UL94V-0
----------
Headers
Retainer
PBT
Color: Black
UL94V-0
Note 1: Standard Color, colors of the differing coupling forms are black for DF33R.
Note 2: Hirose Electric's plating incorporate anti-whisking compounds.
Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
■Ordering Information
●Socket, Header
●Contacts
DF33 R - 2 S - 3.3 C
DF33A - 2022 SCF
1
2
3
4
5
6
1
7
8
4
1 Series name: DF33
2 Guide key type
Connector type
6 Type of housing
S
: Single-row socket
: Double-row socket
C
: Crimp housing
: Straight header
Blank : Inside (Color: natural)
DS
P
DSA
R : Right side (Color: black)
Number of contacts : 2 to 6(Single row)
4 to 12(Double row)
: Single-row header
: Double-row header
: Single-row retainer
7 Applicable conductor
2022 : AWG 20 to AWG 22
8 Packaging
SCF : Socket contacts / reel
SC : Socket contacts / bag
3
DP
RS
RDS : Double-row retainer
5 Contact pitch : 3.3 mm
B139
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF33 Series●3.3 mm Contact Pitch, Connectors for Internal Power Supplies
■Single row - Straight header
Standard Type
R Type
Standard Type (Guide Key: Inside, Color: Natural Beige)
A
B
Cavity No.
Pat number
CL No.
No. of contacts
A
B Q'ty/tray RoHS
P=3.3
DF33-2P-3.3DSA(24) CL676-1016-4-24
DF33-3P-3.3DSA(24) CL676-1017-7-24
DF33-4P-3.3DSA(24) CL676-1018-0-24
DF33-5P-3.3DSA(24) CL676-1019-2-24
DF33-6P-3.3DSA(24) CL676-1020-1-24
2
3
4
5
6
8.4 3.3 135
11.7 6.6 95
15.0 9.9 75
18.3 13.2 60
21.6 16.5 50
YES
Polarity mark Lot No. indicator
R Type (Guide Key: Right Side, Color: Black)
Pat number
CL No.
No. of contacts
A
B
Q'ty/tray RoHS
DF33R-2P-3.3DSA(24) CL676-1043-7-24
DF33R-3P-3.3DSA(24) CL676-1044-0-24
DF33R-4P-3.3DSA(24) CL676-1045-2-24
DF33R-5P-3.3DSA(24) CL676-1046-5-24
DF33R-6P-3.3DSA(24) CL676-1047-8-24
2
3
4
5
6
8.4 3.3 135
11.7 6.6 95
15.0 9.9 75
18.3 13.2 60
21.6 16.5 50
Ø1.25
0.5
YES
1.55
Order by number of tray Q'ty.
BPCB mounting pattern
BMating Dimensions
(Board thickens: 1.6±0.1)
DF33-*RS-3.3
B
0.05
DF33(R)-*S-3.3C
P=3.3 0.05
DF33(R)-*P-3.3DSA(24)
1.55 0.05
Note: Retainer is comment. Standard type and R type.
B140
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF33 Series●3.3 mm Contact Pitch, Connectors for Internal Power Supplies
■Double row - Straight header
Standard Type
R Type
Standard Type (Guide Key: Inside, Color: Natural Beige)
A
B
Pat number
CL No.
No. of contacts
A
B Q'ty/tray RoHS
P=3.3
Cavity No.
DF33-4DP-3.3DSA(24) CL676-1001-7-24
DF33-6DP-3.3DSA(24) CL676-1002-0-24
DF33-8DP-3.3DSA(24) CL676-1003-2-24
DF33-10DP-3.3DSA(24) CL676-1004-5-24
DF33-12DP-3.3DSA(24) CL676-1005-8-24
4
6
8.4 3.3 135
11.7 6.6 95
15.0 9.9 75
18.3 13.2 60
21.6 16.5 50
8
YES
10
12
Polarity mark
Lot No. indicator
R Type (Guide Key: Right Side, Color: Black)
Pat number
CL No.
No. of contacts
A
B
Q'ty/tray RoHS
DF33R-4DP-3.3DSA(24) CL676-1033-3-24
DF33R-6DP-3.3DSA(24) CL676-1034-6-24
DF33R-8DP-3.3DSA(24) CL676-1035-9-24
DF33R-10DP-3.3DSA(24) CL676-1036-1-24
DF33R-12DP-3.3DSA(24) CL676-1037-4-24
4
6
8.4 3.3 135
11.7 6.6 95
15.0 9.9 75
18.3 13.2 60
21.6 16.5 50
8
YES
Ø1.25
0.5
10
12
1.55
Order by number of tray Q'ty.
BPCB mounting pattern
BMating Dimensions
(Board thickens: 1.6±0.1)
DF33-*RDS-3.3
B
0.05
DF33(R)-*DS-3.3C
P=3.3 0.05
DF33(R)-*DP-3.3DSA(24)
1.55 0.05
Note: Retainer is comment. Standard type and R type.
B141
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF33 Series●3.3 mm Contact Pitch, Connectors for Internal Power Supplies
■Single row - Crimp socket
Standard Type
R Type
Standard Type (Guide Key: Inside, Color: Natural Beige)
A
B
P=3.3
Pat number
CL No.
No. of contacts
A
B
RoHS
DF33-2S-3.3C CL676-1021-4
DF33-3S-3.3C CL676-1022-7
DF33-4S-3.3C CL676-1023-0
DF33-5S-3.3C CL676-1024-2
DF33-6S-3.3C CL676-1025-5
2
3
4
5
6
7.8
3.3
11.1
14.4
17.7
21.0
6.6
YES
9.9
13.2
16.5
R Type (Guide Key: Right Side, Color: Black)
Pat number
CL No.
No. of contacts
A
B
RoHS
Cavity No.
DF33R-2S-3.3C CL676-1048-0
DF33R-3S-3.3C CL676-1049-3
DF33R-4S-3.3C CL676-1050-2
DF33R-5S-3.3C CL676-1051-5
DF33R-6S-3.3C CL676-1052-8
2
3
4
5
6
7.8
3.3
Polarity mark
11.1
14.4
17.7
21.0
6.6
YES
9.9
Contact No.1 indicator
13.2
16.5
Note: bag packaging (100 pieces/bag). Order by number of bags.
Refer to next page for retainer.
■Double row - Crimp socket
Standard Type
R Type
Standard Type (Guide Key: Inside, Color: Natural Beige)
A
B
P=3.3
Pat number
CL No.
No. of contacts
A
B
RoHS
DF33-4DS-3.3C CL676-1006-0
DF33-6DS-3.3C CL676-1007-3
DF33-8DS-3.3C CL676-1008-6
DF33-10DS-3.3C CL676-1009-9
DF33-12DS-3.3C CL676-1010-8
4
6
7.8
3.3
11.1
14.4
17.7
21.0
6.6
YES
8
9.9
10
12
13.2
16.5
R Type (Guide Key: Right Side, Color: Black)
Pat number
CL No.
No. of contacts
A
B
RoHS
DF33R-4DS-3.3C CL676-1038-7
DF33R-6DS-3.3C CL676-1039-0
DF33R-8DS-3.3C CL676-1040-9
DF33R-10DS-3.3C CL676-1041-1
DF33R-12DS-3.3C CL676-1042-4
4
6
7.8
3.3
Polarity mark
Cavity No.
11.1
14.4
17.7
21.0
6.6
Contact No.1 indicator
YES
8
9.9
10
12
13.2
16.5
Contact No.2 indicator
Note: bag packaging (100 pieces/bag). Order by number of bags.
Refer to next page for retainer.
B142
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF33 Series●3.3 mm Contact Pitch, Connectors for Internal Power Supplies
■Single row - retainer
A
B
P=3.3
Cavity No.
Pat number
CL No.
No. of contacts
A
B
RoHS
DF33-2RS-3.3 CL676-1026-8
DF33-3RS-3.3 CL676-1027-0
DF33-4RS-3.3 CL676-1028-3
DF33-5RS-3.3 CL676-1029-6
DF33-6RS-3.3 CL676-1030-5
2
3
4
5
6
6.2
3.3
9.5
6.6
YES
12.8
16.1
19.4
9.9
13.2
16.5
Note: Bag packaging (100 pieces/bag). Order by number of bags.
■Double row - retainer
A
P=3.3
Cavity No.
0.65
B
Pat number
CL No.
No. of contacts
A
B
RoHS
8.0
DF33-4RDS-3.3 CL676-1011-0
DF33-6RDS-3.3 CL676-1012-3
DF33-8RDS-3.3 CL676-1013-6
DF33-10RDS-3.3 CL676-1014-9
DF33-12RDS-3.3 CL676-1015-1
4
6
3.3
11.3
14.6
17.9
21.2
6.6
YES
8
9.9
10
12
13.2
16.5
Note: Bag packaging (100 pieces/bag). Order by number of bags.
B143
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF33 Series●3.3 mm Contact Pitch, Connectors for Internal Power Supplies
■Crimp contact for socket
0.5
2.15
1.3
Wiresize indicator
t=0.2
7.5
Applicable cable
Part Number
CL No.
Packaging
RoHS
YES
UL Style
1007
Jacket diameter
Wire size
Stranded wire conductor
21/0.18mm
DF33A-2022SCF
DF33A-2022SC
CL676-1093-5
CL676-1094-8
AWG#20
AWG#22
10,000 pcs./reel
100 pcs./bag
1.5 to 1.9mm
17/0.16mm
Note 1: Applicable wire with tin plated solid soft conductor.
Note 2: When using other than the recommended wire, contact your nearest Hirose representative.
Note 3: Strip length: 2.7 to 3.5mm
BTools
Type
Item
Part Number
AP105-DF33-2022S
HT102/DF33-2022S
DF33-C-P0
CL No.
Applicable contacts
Automatic Applicator
CL901-4603-8
CL550-0290-0
CL902-4551-2
DF33A-2022SCF
Manual
Crimp tool
Contact extraction tool
DF33A-2022SC
----------
DF33A-2022SC(F)
BContact Extraction
■ Contact extraction tool : DF33-C-PO
■ Intended crimp Contacts: DF33A-2022SC(F)
■ Work Method
: DF33-*S-3.3C, DF33A-2022SCF
Housing Cross-Sectional Diagram
(1)
1. Refer to the drawing No. 1. Insert
contact extraction tool in the
insulator against the lance. Deflect
the lance as shown.
Contact extraction tool
Contact lance
(2)
2. Assure that the lance is deflected
to release the contact and pull- out
wire with the terminated contact.
Cautions
Take particular care in removing the contact, thus not being subject to injury at convex portion
edge of the crimping contact.
B144
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF33 Series●3.3 mm Contact Pitch, Connectors for Internal Power Supplies
BPrecautions
●Forcefully unmating the connectors will risk damaging them; therefore, when it is difficult to unmate a
connector, first gently press down on it, then release the lock to allow removal.
●When performing a potting process, pay attention to the surface tension of the resin and fill the resin
accordingly.
●Depending on the method by which wires have been routed within the equipment, tension may be exerted
on the wires and a load applied to the contacts. Use of a retainer is recommended because of this.
●When reusing crimp contacts, raise the lance.
●Depending on the manufacturing lot and the storage conditions that have been used, the shade of the
molded parts may change somewhat; however, this will not affect performance.
BRating
The rated current listed in the catalog indicates the nominal current per contact. When all contacts will be
carrying current, use a current limited to about one third of the listed rating.
Note that even when the rated current of the connector body is 3 A, when the nominal current of the
specified wire is 1 A, the connector shall be used to handle 1 A overall.
Also, do not mate or unmate by hot plug. (See Note 1)
Note 1: The hot wire means that the wires are mated or unmated while electricity is being supplied to them.
BApplication Environment
Please contact us when the application environment is such that the equipment will be used under
repetitively hot and cold temperatures.
B145
相关型号:
©2020 ICPDF网 联系我们和版权申明