DF2-18P-2.5C(40) [HRS]
Board Connector, 18 Contact(s), 1 Row(s), Male, Crimp Terminal, Plug;
| 型号： | DF2-18P-2.5C(40) |
| 厂家： | 
HRS |
| 描述： | Board Connector, 18 Contact(s), 1 Row(s), Male, Crimp Terminal, Plug PC 连接器 |
| 文件： | 总4页 (文件大小：161K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NC Nylon Connectors
DF2 Series (2.5mm Pitch)
DF2 SERIES
2.5 mm Pitch Board-in Connectors (approved by UL & CSA)
■ Features
1. Reduces the cost of the headers.
Extractable socket and board-in connector provided with the dual-
sided harness eliminate one of the two headers required for a dual-
sided socket harness, with the board separating function remaining
unchanged.
2. Space-saving
Compact and space-saving design
Package height:
5.5mm
Height:5.5mm
Width:
4.0mm
Board
grounding
width: 2.7mm
3. Temporary board fixing structure
Can be fixed to a board temporarily because it is lightly press-fitted
to the board when inserted. See Fig. 1.
Temporary board
fixing structure
■ Application
Fig. 1
General OA equipment such as personal computers, fax, printer
123
NC Nylon Connectors
DF2 Series (2.5mm Pitch)
■ Product standard
º
-35~85 C(Note 2)
AWG 24:3A
AWG 26:2A
AWG 28:1A
Operating temp.
Rated current
Cable size
Operating humidity 40~80%
Rating
(Note 1)
º
-10~60 C(Note 3)
Storage temp.
Rated voltage
AC250V
Storage humidity 40~70%(Note 3)
■ UL & CSA Safety Standards File
•
Approved by UL CSA Safety Standard
UL
: E52653
Rated voltage (Note 1) Cable size
AWG 24~28:1A
CSA : R95109
Rating
Rated current
AC30V
Item
Standard
Conditions
1. Insulation resistance
2. Withstand voltage
3. Contact resistance
4. Vibration resistance
5. Moisture resistance
6. Temperature cycle
1000 MΩ or more
Measured at 500 VDC
No flashover or dielectric breakdown allowed
30 mΩ or less
AC650V
Measured at 100 mA
Frequency: 10 - 55 Hz, single-side amplitude: 0.75 mm, 3 directions for 2 hours
1 minute
No damaged or loose parts are allowed
º
Temperature: 40±2 C, humidity: 90 - 95%, allow 96 hours before measurement
Contact resistance: 30 mΩ or less, insulation resistance: 1000 MΩ or more
º
C
º
C
º
º
for 30 min. / 5 - 35 C
Contact resistance: 30 mΩ or less, insulation resistance: 1000 MΩ or more (-55
for 30 min. / 5 - 35
for 10 min. / 85
C
for 10 min.)
5 cycles
º
º
C
7. Solder heat resistance
No melting of resin affecting the connector performance allowed
Flow: 250
C
for 10 seconds
Manual soldering: solder temperature: 300
for 3 seconds
Note 1:
Note 2:
Note 3:
The rated current varies depending on the size of wires connected to the connector.
Includes temperature rise when power is on.
"Storage" refers to a long period of storage without use of the product before being mounted on a board.
The operating temperature and humidity ranges apply to when the product (power off) is mounted on a board.
The above standards are typical for the DF2 series. The formal standards are stated in the delivery specifications.
Note 4:
■ Material
Product
Crimp plug
Part
Material
Processing
White (natural)
Tin-plated
UL Rating
UL94V-0
Insulation
Terminal
Polyamide resin
Phosphor bronze
Crimp terminal for plug
Note : Our tin plating is protected from whiskers.
■ Structure of the product number
The product specifications can be determined from the product number.
When ordering, select products using the product numbers listed in this catalog 125 page.
● Crimp plug
DF2 - ✻P - 2.5C
➀ ➁ ➂➃ ➄ ➅
➀
➁
➂
➃
➄
➅
Series Name:DF
Series No. :2
Contact pitch:2.5mm
Connection form
C:Crimp case
No. of contacts:2~16, 18, 20
Type of connector
P:Plug
● Terminal
DF2 - 2428PCF
➀
➁
➀
➁
Applicable wire size
2428:AWG24~28
Connection form/Type of termination
PCF :Plug contact, reel
PC :Plug contact, loose piece
124
NC Nylon Connectors
DF2 Series (2.5mm Pitch)
■ Crimp plug
Photo shows engaged pins.
● Board through hole dia. : ø0.8 ±00.1
[Specification No.]: -**,(**)
Blank :100 pcs. per pack
(40) : 500 pcs. packaging
(41) : 1000 pcs. packaging
Unit : mm
No. of
No. of
HRS No.
542-0001-6-
542-0002-9-
542-0003-1-
542-0004-4-
542-0005-7-
542-0006-0-
542-0007-2-
542-0008-5-
542-0009-8-
Product No.
A
B
HRS No.
542-0010-7-
542-0011-0-
542-0012-2-
542-0013-5-
542-0014-8-
542-0015-0-
542-0017-6-
542-0019-1-
Product No.
DF2-11P-2.5C(
DF2-12P-2.5C(
DF2-13P-2.5C(
DF2-14P-2.5C(
DF2-15P-2.5C(
DF2-16P-2.5C(
DF2-18P-2.5C(
DF2-20P-2.5C(
A
B
contacts
contacts
DF2- 2P-2.5C(
DF2- 3P-2.5C(
DF2- 4P-2.5C(
DF2- 5P-2.5C(
DF2- 6P-2.5C(
DF2- 7P-2.5C(
DF2- 8P-2.5C(
DF2- 9P-2.5C(
DF2-10P-2.5C(
)
2
3
4
5
6
7
8
9
10
5.0
7.5
10.0
12.5 10.0
15.0 12.5
17.5 15.0
20.0 17.5
22.5 20.5
25.0 22.5
2.5
5.0
7.5
)
✻✻
)
✻✻
)
✻✻
)
✻✻
)
✻✻
)
✻✻
)
✻✻
)
✻✻
11 27.5 25.0
12 30.0 27.5
13 32.5 30.0
14 35.0 32.5
15 37.5 35.0
16 40.0 37.5
18 45.0 42.5
20 50.0 47.5
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
)
✻✻
)
✻✻
)
✻✻
)
✻✻
)
✻✻
)
✻✻
)
✻✻
)
✻✻
Note 1: Minimum order quantity of the models without a number specified is one pack containing 100 sockets.
Note 2: Models available in (40): 500 pieces per package and (41): 1000 pieces per pack should be ordered in quantity of sockets. Order in multiples
of order units, e.g., 500, 1000, 1500,-- ..
HRS No.
542-0020-0
542-0021-3
Product No.
Type
Quantity
Processing
■ Crimp terminal
DF2-2428PCF
Reel terminal
10,000 units per reel Tip-plated
100 pcs. per pack Tip-plated
DF2-2428PC Loose piece terminal
● Applicable wire (Tin-plated annealed copper wire)
Conductor size (core construction)
AWG 24(11 cores0.16mm)
AWG 26(7 cores/0.16mm)
AWG 28(7 cores/0.127mm)
Coating diameter
ø0.9~ø1.5mm
Note: Contact our sales department for unspecified wires.
● Recommended wire:UL1061,UL1007
● Strip length:1.6~2.1mm
❖ Applicable crimping tool
Type
HRS No.
Product No.
AP105-DF2-2428P
CM-105
Applicable contact
DF2-2428PCF
Applicator
901-4506-1
901-0005-4
550-0172-3
550-0170-8
Press body
Manual crimping tool
Extraction tool
DF2-TA2428HC
DF-C-PO(A)
DF2-2428PC
DF2-2428PCF
Note: We will not honor the warranty if a proble is caused by using a tool not approved by Hirose.
125
NC Nylon Connectors
DF2 Series (2.5mm Pitch)
❖ Notes on use
1. Recommended soldering
conditions
■ Flow conditions for automatic soldering device: Solder temperature: 250±5°C, soldering
time: Within 3 seconds
■ Manual soldering conditions: Solder temperature: 290 ±10°C, soldering time: Within 3
seconds
■ If a load is applied to the cables while the connectors and cables are hot after soldering,
the coating clamps tend to be loosened. Wait until the connectors cool off to room
temperature after soldering.
2. Cleaning conditions
See "GUIDE TO HIROSE NYLON CONNECTORS."
Do not use a solvent such as trichloroethane that damages the cable coating.
Also, do not use heated solvent for cleaning.
3. Connecting conditions
See "GUIDE TO HIROSE NYLON CONNECTORS."
126
相关型号：
DF2-20P-2.5C
2.5mm Pitch Connector Directly Mounted on Board (Product Compliant to UL/CSA Standard)
HRS
DF2-2428PC
2.5mm Pitch Connector Directly Mounted on Board (Product Compliant to UL/CSA Standard)
HRS
DF2-2428PCF
2.5mm Pitch Connector Directly Mounted on Board (Product Compliant to UL/CSA Standard)
HRS
©2020 ICPDF网 联系我们和版权申明