首页 |元器件品牌

DF1EC-12P-2.5DSA(00) [HRS]

Board Connector, 12 Contact(s), 1 Row(s), Male, Straight, Solder Terminal,;
DF1EC-12P-2.5DSA(00)
型号： DF1EC-12P-2.5DSA(00)
厂家： HRS    HRS
描述：

Board Connector, 12 Contact(s), 1 Row(s), Male, Straight, Solder Terminal,

连接器
文件： 总16页 (文件大小：293K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
2.5mm Pitch connector for full lock and discrete wire connection  
DF1E Series  
Full lock function  
added  
Inner-lock system  
full lock mechanism  
Mis-insertion  
prevention  
ꢀFeatures  
1. Full lock function added  
Double lock  
engaged  
The inner lock system adopts a full lock mechanism.  
This mechanism prevents disengagement to occur due to  
an unexpected external shock.  
Double lock  
engaged  
2. Increase in crimping contact fixation force and  
semi-insertion prevention  
The double lock is activated for the use method to give a  
stress to the cable, to increase crimping contact fixation  
force, and to prevent the semi-insertion of the crimping  
contact.  
3. Mold lance adopted  
Since the contact lance may be deformed involving in the  
contact after the crimping process, the mold lance has been  
adopted.  
4. Mis-insertion prevention  
Equipped with the mechanism to completely prevent reverse  
insertion and insertion between dissimilar contacts.  
8. Correspond to automatic insertion machine  
5. Means to prevent solder crack  
The radial tape packaging is provided for 2 to  
8 contacts on the straight pin header side, in  
order to correspond to mass production.  
The glass enforcement resin is adopted for the pin header to  
prevent a solder crack to occur due to heat compression.  
6. Correspond to potting  
9. Various applications  
Corresponding to potting, the pin header is provided for  
product variations.  
Corresponding to potting up to 8mm and mounting height  
19.8mm (no retainer), the low profile is achieved.  
With the same series, various applications can  
be used for the board solder dip type and in-  
line.  
7. Production facility cost reduction  
ꢀApplications  
The female crimping contact uses the DF1B series crimping  
contact, which has been conventionally marketed.  
Investment for new facilities isn't needed. However, if the  
retainer is installed in the cable with AWG#22 or more wire,  
use the DF1E crimping contact. The female crimping  
contact for in-line is used together with the DF1B applicator.  
Therefore, no investment is needed for new facilities.  
Electronic equipment, office machines,  
industrial equipment, and consumer  
equipment, and so on  
1
ꢀProducts specifications  
Rated current note 1.  
AWG#20~24 :  
3A  
2A  
1A  
26 :  
28 :  
Operating temperature range -35~+85ç Note 2.  
Storage temperature range -10~+60ç note 3.  
Storage moisture range -40~70%  
Rating  
O
perating moisture range -40~80%  
30 : 0.5A  
Rated voltage AC250V  
Item  
Specification  
Condition  
1. Contact resistance  
2. Insulation resistance  
3. Withstand voltage  
4. Single insertion/extraction force  
5. Operating life  
30mø max.  
Measured at 20mV max. and 1mA  
1000Mø min.  
Measured at 500V DC  
Neither short or breakdown  
MIN 0.4N, MAX 4.4N  
30mø max  
150V AC energized for 1 minute  
Measured at the square steel pin with 0.635± 0.002  
30 cycles of insertions/extractions  
6. Vibration  
Electrical discontinuity, 1µS max.  
Electrical discontinuity, 1µS max.  
30mø max  
10~55Hz and single amplitude 0.75mm in 3 directions for 2 hours, respectively.  
490m/s and 11ms, sin/cosine 3 directions, 3 times, respectively  
Exposed to temperature 40± ±çꢀand humidity 90~95% for 96 hours  
(-55ç: 30 minutes-> 5~35ç: 5 minutes-> 85ç: 30 minutes-> 5~35ç: 5 minutes) 5 cicles  
7. Shock  
8. Moisture resistance  
9. Temperature cycle  
10. Resistance to soldering heat  
30mø max.  
Neither deformation on the appearance nor remarkable contact backlash is found. Reflow: 250ç: 20 seconds  
Manual soldering: soldering iron temperature: 300  
ç
for 3 seconds  
Note 1 : Temperature rise included when energized  
Note 2 : This storage indicates a long-term storage state for the unused product before the board mounted.  
The operating temperature and moisture ranges are applied to the non-energized state after the connector has been installed to the board.  
Note 3 : The above standards represent this series. Individual formal agreement should be based on the "Specification".  
ꢀMaterial  
Product  
Part  
Material  
Polyamide  
Polyamide  
Brass  
Treatment  
White  
Remarks  
UL94V-0  
UL94V-0  
–––––––  
UL94V-0  
UL94V-0  
–––––––  
Socket  
Insulator  
Insulator  
Contact  
Insulator  
Insulator  
Contact  
Beige  
Header  
Solder plating  
White  
In-line Plug  
retainer  
Polyamide  
Polyamide  
Phosphor copper  
Black  
Crimping contact  
Tin plating  
Note : The whisker method is implemented for HRS tin plating.  
2
ꢀOrdering information  
ꢀPin header  
q Series name : DF  
w Series No. : 1E  
r
t
Number of Contacts : 2 to 15 contacts  
Connector Type  
DF 1E C - π P - 2.5 DSA  
q
w
e
r
t
y
u
e
Hold Types  
P : Pin Header  
y Contact Pitch : 2.5mm  
u Form type  
Standard Product  
With Boss  
Potting  
With Boss  
Without Boss  
DSA : Straight Dip  
DS : Right Angle Type  
C
Without Boss  
G
Note 1 : The right angle pin header has no symbol.  
Note 2 : The potting header has 2 to 10 contacts.  
ꢀSocket  
q Series name : DF  
w Series No. : 1E  
r
t
Connector type  
S: Socket  
DF 1E - π S - 2.5 C  
q
w
e
r
t
y
e
Number of Contacts : 2 to 15 contacts  
Contact Pitch : 2.5mm  
y Form Type  
C : Crimping socket  
ꢀIn-line plug  
q Series name : DF  
w Series No. : 1E  
r
t
Number of Contacts : 2 to 10 contacts  
DF 1E A - π EP - 2.5 C  
EP : In-line plug  
q
w
e
r
t
y
u
e
In-line Plug type  
y Contact Pitch : 2.5mm  
u Form Type  
None: With Panel mount Lock  
A : Without Panel mount Lock  
C : Crimping socket  
ꢀCrimping contact  
q Series name : DF  
w Series No.  
e
r
Applicable Cable Size  
2022 : AWG#20~#22  
2428 : WG#24~#28  
DF 1E - ππ SCF  
:
q
w
e
r
Socket side : 1B (Note 1)  
1E (Note 1)  
30  
: AWG#30  
Plug side  
: 1E  
Packaging Type  
SCF : Female contact : Reel  
SF  
: Female contact : Bag  
PCF : Male contact : Reel  
PC : Male contact : Bag  
Note 1 : When the retainer is used, use DF1E-2022SC(F), DF1B-  
2428SC(F), and DF1B-30SC(F) contacts.  
Note 1 : When no retainer is used, all DF1B-ππSC(F) and DF1E-  
2022SC(F) contacts can be used.  
ꢀRetainer  
q Series name : DF  
w Series No. : 1E  
r
t
Connector Type  
DF 1E - π RS/P - 2.5  
RS/P : Retainer  
q
w
e
r
t
e
Number of Contacts : 2 to 10 contacts  
Commonly used for socket and in-line plug  
Contacts Pitch:2.5mm  
3
ꢀApplication pattern  
Socket  
Retainer  
Photo : Contact Inserted  
Pin header  
Relay plug  
ꢀStraight type  
ꢀIn-line plug (panel mount lock type)  
Photo: contact Inserted  
ꢀIn-line plug  
ꢀStraight potting type  
Photo: contact Inserted  
ꢀRight angle type  
4
ꢀRight angle pin header  
5.4  
MoldꢀCavityꢀ  
No.ꢀmark  
ContactꢀNo.ꢀmark  
A
ꢁ0  
M
0.64  
±.5  
Pꢀ=  
A
B
ContactꢀNo.ꢁꢀindicated  
Noteꢀ±  
The symbol ππ included in  
HRS No. and the product spec  
No. indicates the Specific No.  
Product No.  
HRS No.  
Number of Contacts  
A
B
DFꢁEꢀ–0±P–±.5DS(ππ)  
DFꢁEꢀ–03P–±.5DS(ππ)  
DFꢁEꢀ–04P–±.5DS(ππ)  
DFꢁEꢀ–05P–±.5DS(ππ)  
DFꢁEꢀ–06P–±.5DS(ππ)  
DFꢁEꢀ–07P–±.5DS(ππ)  
DFꢁEꢀ–08P–±.5DS(ππ)  
DFꢁEꢀ–09P–±.5DS(ππ)  
DFꢁEꢀ–ꢁ0P–±.5DS(ππ)  
DFꢁEꢀ–ꢁꢁP–±.5DS(ππ)  
DFꢁEꢀ–ꢁ±P–±.5DS(ππ)  
DFꢁEꢀ–ꢁ3P–±.5DS(ππ)  
DFꢁEꢀ–ꢁ4P–±.5DS(ππ)  
DFꢁEꢀ–ꢁ5P–±.5DS(ππ)  
CL54ꢁꢀ–ꢀ0985–ꢀ0ꢀ–ππ  
CL54ꢁꢀ–ꢀ0986–ꢀ3ꢀ–ππ  
CL54ꢁꢀ–ꢀ0987–ꢀ6ꢀ–ππ  
CL54ꢁꢀ–ꢀ0988–ꢀ9ꢀ–ππ  
CL54ꢁꢀ–ꢀ0989–ꢀꢁꢀ–ππ  
CL54ꢁꢀ–ꢀ0990–ꢀ0ꢀ–ππ  
CL54ꢁꢀ–ꢀ099ꢁ–ꢀ3ꢀ–ππ  
CL54ꢁꢀ–ꢀ099±–ꢀ6ꢀ–ππ  
CL54ꢁꢀ–ꢀ0993–ꢀ9ꢀ–ππ  
CL54ꢁꢀ–ꢀ0994–ꢀꢁꢀ–ππ  
CL54ꢁꢀ–ꢀ0995–ꢀ4ꢀ–ππ  
CL54ꢁꢀ–ꢀ0996–ꢀ7ꢀ–ππ  
CL54ꢁꢀ–ꢀ0997–ꢀ0ꢀ–ππ  
CL54ꢁꢀ–ꢀ0998–ꢀ±ꢀ–ππ  
±
3
0±.5  
05.0  
07.5  
ꢁ0.0  
ꢁ±.5  
ꢁ5.0  
ꢁ7.5  
±0.0  
±±.5  
±5.0  
±7.5  
30.0  
3±.5  
35.0  
07.5  
ꢁ0.0  
ꢁ±.5  
ꢁ5.0  
ꢁ7.5  
±0.0  
±±.5  
±5.0  
±7.5  
30.0  
3±.5  
35.0  
37.5  
40.0  
4
5
6
7
8
9
ꢁ0  
ꢁꢁ  
ꢁ±  
ꢁ3  
ꢁ4  
ꢁ5  
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity  
for delivery will be changed according to the Specific No.  
Note 2. : The 2 to 4 contacts differ in two convex portions from those in above figures. The 2 and 3 contacts are not contained, but the 4  
contact connector is contained in the center at one point.  
Note 3. : Styles of 2 to 4 contact connectors partially differ from those in above figures.  
BPCB footprints (board thickness t = 1.6 ± ꢀ0.1)  
A± 0.ꢁ  
Pꢀ=  
±.5± 0.05  
5
5.4  
ꢀStraight pin header  
MoldꢀCavityꢀ  
No.ꢀmark  
ContactꢀNo.ꢀmark  
A
ꢁ0  
Pꢀ=  
±.5  
A
B
ContactꢀNo.ꢁꢀindicated  
M
0.64  
Noteꢀ±  
The symbol ππ included in  
HRS No. and the product spec  
No. indicates the Specific No.  
Product No.  
HRS No.  
Number of Contacts  
A
B
DFꢁEC–0±P–±.5DSA(ππ)  
DFꢁEC–03P–±.5DSA(ππ)  
DFꢁEC–04P–±.5DSA(ππ)  
DFꢁEC–05P–±.5DSA(ππ)  
DFꢁEC–06P–±.5DSA(ππ)  
DFꢁEC–07P–±.5DSA(ππ)  
DFꢁEC–08P–±.5DSA(ππ)  
DFꢁEC–09P–±.5DSA(ππ)  
DFꢁEC–ꢁ0P–±.5DSA(ππ)  
DFꢁEC–ꢁꢁP–±.5DSA(ππ)  
DFꢁEC–ꢁ±P–±.5DSA(ππ)  
DFꢁEC–ꢁ3P–±.5DSA(ππ)  
DFꢁEC–ꢁ4P–±.5DSA(ππ)  
DFꢁEC–ꢁ5P–±.5DSA(ππ)  
CL54ꢁ–ꢀ0867–ꢀ4ꢀ–ππ  
CL54ꢁ–ꢀ0868–ꢀ7ꢀ–ππ  
CL54ꢁ–ꢀ0869–ꢀ0ꢀ–ππ  
CL54ꢁ–ꢀ0870–ꢀ9ꢀ–ππ  
CL54ꢁ–ꢀ087ꢁ–ꢀꢁꢀ–ππ  
CL54ꢁ–ꢀ087±–ꢀ4ꢀ–ππ  
CL54ꢁ–ꢀ0873–ꢀ7ꢀ–ππ  
CL54ꢁ–ꢀ0874–ꢀ0ꢀ–ππ  
CL54ꢁ–ꢀ0875–ꢀ±ꢀ–ππ  
CL54ꢁ–ꢀ0876–ꢀ5ꢀ–ππ  
CL54ꢁ–ꢀ0877–ꢀ8ꢀ–ππ  
CL54ꢁ–ꢀ0878–ꢀ0ꢀ–ππ  
CL54ꢁ–ꢀ0879–ꢀ3ꢀ–ππ  
CL54ꢁ–ꢀ0880–ꢀ±ꢀ–ππ  
±
3
0±.5  
05.0  
07.5  
ꢁ0.0  
ꢁ±.5  
ꢁ5.0  
ꢁ7.5  
±0.0  
±±.5  
±5.0  
±7.5  
30.0  
3±.5  
35.0  
07.5  
ꢁ0.0  
ꢁ±.5  
ꢁ5.0  
ꢁ7.5  
±0.0  
±±.5  
±5.0  
±7.5  
30.0  
3±.5  
35.0  
37.5  
40.0  
4
5
6
7
8
9
ꢁ0  
ꢁꢁ  
ꢁ±  
ꢁ3  
ꢁ4  
ꢁ5  
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity  
for delivery will be changed according to the Specific No.  
Note 2. : The 2 to 4 contacts differ in two convex portions from those in above figures. The 2 and 3 contacts are not contained, but the 2  
and 3 contacts are not contained, and 4 contact is in the center at one point.  
Note 3. : Styles of 2 to 4 contacts partially differ from those in above figures.  
Note 4. : The radial package is prepared for DF1EC-πP-2.5DSA(25).However, 2 to 8 contacts only are provided. (Quantity of packaged 2  
and 3 contacts: 1000pcs., 4 to 8 contacts: 400pcs.)  
BPCB footprints (board thickness t = 1.6 ± ꢀ0.1)  
A± 0.ꢁ  
Pꢀ=  
±.5± 0.05  
6
ꢀStraight pin header for potting  
5.4  
MoldꢀCavityꢀ  
No.ꢀmark  
ContactꢀNo.ꢀmark  
A
ꢁ0  
P= ±.5  
A
B
ContactꢀNo.ꢁꢀindicated  
M
0.64  
Noteꢀ±  
Noteꢀ±  
The symbol ππ  
included in HRS No.  
and the product  
spec No. indicates  
the Specific No.  
Product No.  
HRS No.  
Number of Contacts  
A
B
C
DFꢁEGꢀ–0±P–±.5DSA(ππ)  
DFꢁEGꢀ–03P–±.5DSA(ππ)  
DFꢁEGꢀ–04P–±.5DSA(ππ)  
DFꢁEGꢀ–05P–±.5DSA(ππ)  
DFꢁEGꢀ–06P–±.5DSA(ππ)  
DFꢁEGꢀ–07P–±.5DSA(ππ)  
DFꢁEGꢀ–08P–±.5DSA(ππ)  
DFꢁEGꢀ–09P–±.5DSA(ππ)  
DFꢁEGꢀ–ꢁ0P–±.5DSA(ππ)  
DFꢁEGꢀ–ꢁꢁP–±.5DSA(ππ)  
CL54ꢁꢀ–ꢀ09±3ꢀ–ꢀ3ππ  
CL54ꢁꢀ–ꢀ09±4ꢀ–ꢀ6ππ  
CL54ꢁꢀ–ꢀ09±5ꢀ–ꢀ9ππ  
CL54ꢁꢀ–ꢀ09±6ꢀ–ꢀꢁππ  
CL54ꢁꢀ–ꢀ09±7ꢀ–ꢀ4ππ  
CL54ꢁꢀ–ꢀ09±8ꢀ–ꢀ7ππ  
CL54ꢁꢀ–ꢀ09±9ꢀ–ꢀ0ππ  
CL54ꢁꢀ–ꢀ0930ꢀ–ꢀ9ππ  
CL54ꢁꢀ–ꢀ093ꢁꢀ–ꢀꢁππ  
CL54ꢁꢀ–ꢀ093±ꢀ–ꢀ4ππ  
±
3
0±.5  
05.0  
07.5  
ꢁ0.0  
ꢁ±.5  
ꢁ5.0  
ꢁ7.5  
±0.0  
±±.5  
±5.0  
07.5  
ꢁ0.0  
ꢁ±.5  
ꢁ5.0  
ꢁ7.5  
±0.0  
±±.5  
±5.0  
±7.5  
30.0  
7.8  
7.8  
7.8  
8.0  
8.0  
8.0  
8.0  
8.0  
8.0  
8.0  
4
5
6
7
8
9
ꢁ0  
ꢁꢁ  
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. However, the quantity  
for delivery will be changed according to spec number.  
Note 2. : The 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. The 2 to 5 and 9 to 10  
contacts are not contained, but the 6 contact is bonded to the convex portion at both ends.  
Note 3. : Styles of 2 to 4 contact may partially differ from the above figures.  
Note 4. : The radial tape packaging is prepared for DF1EG-πP-2.5DSA(25).However, 2 to 8 contacts are available. (Quantity of packaged  
2 and 3 contacts : 1000pcs., 4 to 8 contacts: 400pcs.)  
BPCB footprints (board thickness t = 1.6 ± ꢀ0.1)  
A± 0.ꢁ  
Pꢀ=  
±.5± 0.05  
7
ꢀIn-line plug (panel mount lock type)  
A
B
±.8  
±.8  
Pꢀ=  
±.5  
MoldꢀCavityꢀ  
No.ꢀmark  
ContactꢀNo.ꢀmark  
A
ꢁꢀꢀ0  
C
ContactꢀNo.ꢁꢀindicated  
ꢁ0  
9
7
5
3
ꢁ
ContactꢀNo.ꢀindicated  
Photo: contact inserted.  
ContactꢀNo.ꢁꢀindicated  
Noteꢀ±  
Noteꢀ3  
Product No.  
HRS No.  
Number of Contacts  
A
B
C
D
E
DFꢁE–0±EP–±.5C(ππ)  
DFꢁE–03EP–±.5C(ππ)  
DFꢁE–04EP–±.5C(ππ)  
DFꢁE–05EP–±.5C(ππ)  
DFꢁE–06EP–±.5C(ππ)  
DFꢁE–07EP–±.5C(ππ)  
DFꢁE–08EP–±.5C(ππ)  
DFꢁE–09EP–±.5C(ππ)  
DFꢁE–ꢁ0EP–±.5C(ππ)  
CL54ꢁ–ꢀ0943–ꢀ0ꢀ–ππ  
CL54ꢁ–ꢀ0944–ꢀ3ꢀ–ππ  
CL54ꢁ–ꢀ0945–ꢀ6ꢀ–ππ  
CL54ꢁ–ꢀ0946–ꢀ9ꢀ–ππ  
CL54ꢁ–ꢀ0947–ꢀꢁꢀ–ππ  
CL54ꢁ–ꢀ0948–ꢀ4ꢀ–ππ  
CL54ꢁ–ꢀ0949–ꢀ7ꢀ–ππ  
CL54ꢁ–ꢀ0950–ꢀ6ꢀ–ππ  
CL54ꢁ–ꢀ095ꢁ–ꢀ9ꢀ–ππ  
±
3
8.0  
±.5  
ꢁ5.0  
ꢁ7.5  
±0.0  
±±.5  
±5.0  
±7.5  
30.0  
3±.5  
35.0  
8.4  
ꢁ±.5  
ꢁ5.0  
ꢁ7.5  
±0.0  
±±.5  
±5.0  
±7.5  
30.0  
3±.5  
ꢁ0.5  
ꢁ3.0  
ꢁ5.5  
ꢁ8.0  
±0.5  
±3.0  
±5.5  
±8.0  
5.0  
ꢁ0.9  
ꢁ3.4  
ꢁ5.9  
ꢁ8.4  
±0.9  
±3.4  
±5.9  
±8.4  
4
7.5  
5
ꢁ0.0  
ꢁ±.5  
ꢁ5.0  
ꢁ7.5  
±0.0  
±±.5  
6
7
8
9
ꢁ0  
The symbol ππ included in HRS No. and the product spec No. indicates the Specific No.  
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity  
for delivery will be changed according to the Specific No.  
Note 2. : In regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends.  
Note 3. In regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures.  
Note 4. Use the no radius side at the panel edge in the looking area.  
Note 5. : Panel fixation is loosened. (May be enlarged according to the panel board thickness.)  
Note 6. : Styles of 2 to 4 contact partially differ from those in the above figures.  
*ꢀRefer to page B122 for the retainer.  
BPanel cut-outs  
+0.ꢁ  
(ꢀEꢀ+ꢀ  
0
+0.ꢁ  
D
0
5.8 +0.±  
0
Panel Thickness  
ꢁ.7~±.0  
X
1.5  
Panel  
1.0  
0.5  
0.0  
ꢁ.3~ꢁ.6  
Noteꢀ4  
0.9~ꢁ.±  
0.7~0.8  
8
ꢀIn-line plug  
A
B
Pꢀ=  
±.5  
MoldꢀCavityꢀ  
No.ꢀmark  
ContactꢀNo.ꢀmark  
A
1 0  
ContactꢀNo.ꢁꢀindicated  
Photo: Contact Inserted  
1 0  
9
7
5
3
1
ContactꢀNo.ꢀmark  
ContactꢀNo.ꢁꢀindicated  
Noteꢀ±  
Noteꢀ3  
The symbol ππ included in  
HRS No. and the product spec  
No. indicate a Specific No.  
Product No.  
HRS No.  
Number of Contacts  
A
B
DFꢁEAꢀ–0±EP–±.5C(ππ)  
DFꢁEAꢀ–03EP–±.5C(ππ)  
DFꢁEAꢀ–04EP–±.5C(ππ)  
DFꢁEAꢀ–05EP–±.5C(ππ)  
DFꢁEAꢀ–06EP–±.5C(ππ)  
DFꢁEAꢀ–07EP–±.5C(ππ)  
DFꢁEAꢀ–08EP–±.5C(ππ)  
DFꢁEAꢀ–09EP–±.5C(ππ)  
DFꢁEAꢀ–ꢁ0EP–±.5C(ππ)  
CL54ꢁꢀ–ꢀ0957ꢀ–ꢀ5ꢀ–ꢀππ  
CL54ꢁꢀ–ꢀ0958ꢀ–ꢀ8ꢀ–ꢀππ  
CL54ꢁꢀ–ꢀ0959ꢀ–ꢀ0ꢀ–ꢀππ  
CL54ꢁꢀ–ꢀ0960ꢀ–ꢀ0ꢀ–ꢀππ  
CL54ꢁꢀ–ꢀ096ꢁꢀ–ꢀ±ꢀ–ꢀππ  
CL54ꢁꢀ–ꢀ096±ꢀ–ꢀ5ꢀ–ꢀππ  
CL54ꢁꢀ–ꢀ0963ꢀ–ꢀ8ꢀ–ꢀππ  
CL54ꢁꢀ–ꢀ0964ꢀ–ꢀ0ꢀ–ꢀππ  
CL54ꢁꢀ–ꢀ0965ꢀ–ꢀ3ꢀ–ꢀππ  
±
3
08.0  
ꢁ0.5  
ꢁ3.0  
ꢁ5.5  
ꢁ8.0  
±0.5  
±3.0  
±5.5  
±8.0  
0±.5  
05.0  
07.5  
ꢁ0.0  
ꢁ±.5  
ꢁ5.0  
ꢁ7.5  
±0.0  
±±.5  
4
5
6
7
8
9
ꢁ0  
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity  
for delivery will be changed according to the Specific No.  
Note 2. : In regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends.  
Note 3. : 2 to 7 contacts do not contain two convex portions, which is different from the above figure.  
Note 4. : Styles of 2 to 4 contacts partially differ from the above figures.  
* Refer to page B122 for retainer.  
9
ꢀSocket  
Pꢀ=  
±.5  
A
B
C
Noteꢀ±  
ꢁ0  
ꢁ
Photo: Contact Inserted  
ContactꢀNo.ꢀmark  
No.ꢀꢁꢀcontactꢀindicated  
7.55  
MoldꢀCavityꢀ  
No.ꢀmark  
Noteꢀ3  
Noteꢀ4  
Noteꢀ3  
Noteꢀ4  
The symbol ππ  
included in HRS No.  
and the product  
spec No. indicate a  
Specific No.  
Product No.  
HRS No.  
Number of Contacts  
A
B
C
DFꢁEꢀ–0±S–±.5C(ππ)  
DFꢁEꢀ–03S–±.5C(ππ)  
DFꢁEꢀ–04S–±.5C(ππ)  
DFꢁEꢀ–05S–±.5C(ππ)  
DFꢁEꢀ–06S–±.5C(ππ)  
DFꢁEꢀ–07S–±.5C(ππ)  
DFꢁEꢀ–08S–±.5C(ππ)  
DFꢁEꢀ–09S–±.5C(ππ)  
DFꢁEꢀ–ꢁ0S–±.5C(ππ)  
DFꢁEꢀ–ꢁꢁS–±.5C(ππ)  
DFꢁEꢀ–ꢁ±S–±.5C(ππ)  
DFꢁEꢀ–ꢁ3D–±.5C(ππ)  
DFꢁEꢀ–ꢁ4S–±.5C(ππ)  
DFꢁEꢀ–ꢁ5S–±.5C(ππ)  
CL54ꢁꢀ–ꢀ08ꢁꢁꢀ–ꢀ0ꢀ–ꢀππ  
CL54ꢁꢀ–ꢀ08ꢁ±ꢀ–ꢀ±ꢀ–ꢀππ  
CL54ꢁꢀ–ꢀ08ꢁ3ꢀ–ꢀ5ꢀ–ꢀππ  
CL54ꢁꢀ–ꢀ08ꢁ4ꢀ–ꢀ8ꢀ–ꢀππ  
CL54ꢁꢀ–ꢀ08ꢁ5ꢀ–ꢀ0ꢀ–ꢀππ  
CL54ꢁꢀ–ꢀ08ꢁ6ꢀ–ꢀ3ꢀ–ꢀππ  
CL54ꢁꢀ–ꢀ08ꢁ7ꢀ–ꢀ6ꢀ–ꢀππ  
CL54ꢁꢀ–ꢀ08ꢁ8ꢀ–ꢀ9ꢀ–ꢀππ  
CL54ꢁꢀ–ꢀ08ꢁ9ꢀ–ꢀꢁꢀ–ꢀππ  
CL54ꢁꢀ–ꢀ08±0ꢀ–ꢀ0ꢀ–ꢀππ  
CL54ꢁꢀ–ꢀ08±ꢁꢀ–ꢀ3ꢀ–ꢀππ  
CL54ꢁꢀ–ꢀ08±±ꢀ–ꢀ6ꢀ–ꢀππ  
CL54ꢁꢀ–ꢀ08±3ꢀ–ꢀ9ꢀ–ꢀππ  
CL54ꢁꢀ–ꢀ08±4ꢀ–ꢀꢁꢀ–ꢀππ  
±
3
0±.5  
05.0  
07.5  
ꢁ0.0  
ꢁ±.5  
ꢁ5.0  
ꢁ7.5  
±0.0  
±±.5  
±5.0  
±7.5  
30.0  
3±.5  
35.0  
08.0  
ꢁ0.5  
ꢁ3.0  
ꢁ5.5  
ꢁ8.0  
±0.5  
±3.0  
±5.5  
±8.0  
30.5  
33.0  
35.5  
38.0  
40.5  
05.4  
07.9  
ꢁ0.4  
ꢁ±.9  
ꢁ5.4  
ꢁ7.9  
±0.4  
±±.9  
±5.4  
±7.9  
30.4  
3±.9  
35.4  
37.9  
4
5
6
7
8
9
ꢁ0  
ꢁꢁ  
ꢁ±  
ꢁ3  
ꢁ4  
ꢁ5  
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity  
for delivery will be changed according to spec number.  
Note 2. : The 2 contact connector is equipped with the convex portion to prevent false-insertion.  
Note 3. : The 2 consult Has no wall on the locking side  
Note 4. : The 2 to 5 contacts contain the retainer fixed convex portions at both ends.  
* Refer to page B122 for the retainer.  
10  
ꢀRetainer  
A
ꢁ.9  
B
ꢁ.7  
0.7  
Pꢀ= ±.5  
Note±  
Note±  
ContactꢀNo.ꢀmark  
ꢁꢀ0  
A
MoldꢀCavityꢀ  
No.ꢀmark  
The symbol ππ included in  
HRS No. and the product spec  
No. indicates the Specific No.  
Product No.  
HRS No.  
Number of Contacts  
A
B
DFꢁEꢀ–0±RS/P–±.5(ππ)  
DFꢁEꢀ–03RS/P–±.5(ππ)  
DFꢁEꢀ–04RS/P–±.5(ππ)  
DFꢁEꢀ–05RS/P–±.5(ππ)  
DFꢁEꢀ–06RS/P–±.5(ππ)  
DFꢁEꢀ–07RS/P–±.5(ππ)  
DFꢁEꢀ–08RS/P–±.5(ππ)  
DFꢁEꢀ–09RS/P–±.5(ππ)  
DFꢁEꢀ–ꢁ0RS/P–±.5(ππ)  
CL54ꢁꢀ–ꢀ097ꢁꢀ–ꢀ6  
CL54ꢁꢀ–ꢀ097±ꢀ–ꢀ9  
CL54ꢁꢀ–ꢀ0973ꢀ–ꢀꢁ  
CL54ꢁꢀ–ꢀ0974ꢀ–ꢀ4  
CL54ꢁꢀ–ꢀ0975ꢀ–ꢀ7  
CL54ꢁꢀ–ꢀ0976ꢀ–ꢀ0  
CL54ꢁꢀ–ꢀ0977ꢀ–ꢀ±  
CL54ꢁꢀ–ꢀ0978ꢀ–ꢀ5  
CL54ꢁꢀ–ꢀ0979ꢀ–ꢀ8  
±
3
08.0  
ꢁ0.5  
ꢁ3.0  
ꢁ5.5  
ꢁ8.0  
±0.5  
±3.0  
±5.5  
±8.0  
0±.5  
05.0  
07.5  
ꢁ0.0  
ꢁ±.5  
ꢁ5.0  
ꢁ7.5  
±0.0  
±±.5  
4
5
6
7
8
9
ꢁ0  
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity  
for delivery will be changed according to spec number.  
Note 2. : The 2 to 4 contacts contain socket and plug fixed holes at both ends.  
* This retainer can be used together with the socket and relay plug.  
11  
ꢀPlug crimping contact  
ꢁ.5  
±.±  
0.64  
0.64  
ꢀApplicable cable (tin plating annealed copper wire)  
ꢀRecommended cable  
UL1061, UL1007  
Conductor Size (Wire construction)  
AWG # 20 (21 cores./0.18mm)  
AWG # 22 (17 cores./0.16mm)  
AWG # 24 (11 cores./0.16mm)  
AWG # 26 (07 cores./0.16mm)  
AWG # 28 (07 cores./0.127mm)  
AWG # 30 (07 cores./0.1mm)  
ꢀStrip length  
3.0~3.7mm  
Note : If other cables are used instead of the applicable  
cable, contact Hirose sales department.  
Applicable Cable  
Applicable  
Cable Indication  
Packaging  
Type  
Product No.  
HRS No.  
Quantity  
AWG  
Jacket Diameter  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
10,000  
100  
DFꢁEꢀ–ꢀ±0±±PCF CL54ꢁꢀ–ꢀ0937ꢀ–ꢀ8  
DFꢁEꢀ–ꢀ±0±±PC CL54ꢁꢀ–ꢀ0938ꢀ–ꢀ0  
DFꢁEꢀ–ꢀ±4±8PCF CL54ꢁꢀ–ꢀ0939ꢀ–ꢀ3  
20  
22  
AWGꢀ#ꢀ±0  
AWGꢀ#ꢀ±±  
ꢁ.±~ꢁ.9mm  
10,000  
100  
24  
28  
AWGꢀ#ꢀ±4  
AWGꢀ#ꢀ±8  
0.9~ꢁ.5mm  
0.6~ꢁ.±mm  
DFꢁEꢀ–ꢀ±4±8PC  
DFꢁEꢀ–ꢀ30PCF  
DFꢁEꢀ–ꢀ30PC  
CL54ꢁꢀ–ꢀ0940ꢀ–ꢀ±  
CL54ꢁꢀ–ꢀ094ꢁꢀ–ꢀ5  
CL54ꢁꢀ–ꢀ094±ꢀ–ꢀ8  
10,000  
100  
30  
AWGꢀ#ꢀ30  
ꢀꢀCrimping contact extraction tool DF-C-PO(B)  
12  
ꢀSocket crimping contact  
ꢀDF1E-2022SCF  
ꢀDF1B -ꢀ*ꢀ*ꢀ*ꢀ*ꢀSCF  
ꢁ.75  
0.975  
ꢁ.75  
ꢁ.4  
ꢁ.95  
Applicableꢀcableꢀindicated  
0.83  
ꢁ.95  
Applicableꢀcableꢀindicated  
0.55  
ꢀApplicable cable (tin plating annealed copper wire)  
ꢀRecommended cable  
UL1061, UL1007  
Conductor Size (Wire construction)  
AWG # 20 (21 cores./0.18mm)  
AWG # 22 (17 cores./0.16mm)  
AWG # 24 (11 cores./0.16mm)  
AWG # 26 (07 cores./0.16mm)  
AWG # 28 (07 cores./0.127mm)  
AWG # 30 (07 cores./0.1mm)  
ꢀStrip length  
±.0mm~±.5mm  
Note : If other cables are used instead of the applicable  
cable, consult Hirose sales department.  
Applicable Cable  
Applicable  
Cable Indication  
Packaging  
Type  
Product No.  
HRS No.  
Quantity  
AWG  
Jacket Diameter  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
10,000  
100  
DF1E –ꢀ2022SCF CL54ꢁꢀ–ꢀ0999ꢀ–ꢀ5  
DF1E –ꢀ2022SC CL54ꢁꢀ–ꢀꢁ000ꢀ–ꢀ±  
DF1B –ꢀ2022SCF CL54ꢁꢀ–ꢀ0±±3ꢀ–ꢀꢁ  
DF1B –ꢀ2022SC CL54ꢁꢀ–ꢀ0±±4ꢀ–ꢀ4  
DF1B –ꢀ2428SCF CL54ꢁꢀ–ꢀ0678ꢀ–ꢀꢁ  
20  
22  
AWGꢀ#ꢀ±0  
AWGꢀ#ꢀ±±  
ꢁ.±~ꢁ.9mm  
10,000  
100  
20  
22  
AWGꢀ#ꢀ±0  
AWGꢀ#ꢀ±±  
ꢁ.±~ꢁ.9mm  
0.9~ꢁ.5mm  
0.6~ꢁ.±mm  
10,000  
100  
24  
28  
AWGꢀ#ꢀ±4  
AWGꢀ#ꢀ±8  
DF1B –ꢀ2428SC  
DF1B –ꢀ30SCF  
DF1B –ꢀ30SC  
CL54ꢁꢀ–ꢀ0679ꢀ–ꢀ4  
CL54ꢁꢀ–ꢀ068±ꢀ–ꢀ9  
CL54ꢁꢀ–ꢀ0683ꢀ–ꢀꢁ  
10,000  
100  
30  
AWGꢀ#ꢀ30  
ꢀꢀCrimping contact extraction tool DF-C-PO(B)  
13  
BCrimping tools  
Item  
Product No.  
AP105 –ꢀDF1E –ꢀ2022S  
AP105 –ꢀDF1B –ꢀ2022S  
AP105 –ꢀDF1B –ꢀ2428S  
AP105 –ꢀDF1B –ꢀ30S  
AP105 –ꢀDF1B –ꢀ2022P  
AP105 –ꢀDF1B –ꢀ2428P  
AP105 –ꢀDF1B –ꢀ30P  
CM –ꢀ105  
HRS No.  
Applicable Contact  
DFꢁEꢀ–ꢀ±0±±SCF  
DFꢁBꢀ–ꢀ±0±±SCF  
DFꢁBꢀ–ꢀ±4±8SCF  
DFꢁBꢀ–ꢀ30SCF  
DFꢁEꢀ–ꢀ±0±±PCF  
DFꢁEꢀ–ꢀ±4±8PCF  
DFꢁEꢀ–ꢀ30PCF  
––––––  
CL901 –ꢀ4561 –ꢀ0  
CL901 –ꢀ4510 –ꢀ9  
CL901 –ꢀ4518 –ꢀ0  
CL901 –ꢀ4517 –ꢀ8  
CL901 –ꢀ4509 –ꢀ0  
CL901 –ꢀ4521 –ꢀ5  
CL901 –ꢀ4519 –ꢀ3  
CL901 –ꢀ0005 –ꢀ4  
CL550 –ꢀ0277 –ꢀ1  
CL550 –ꢀ0182 –ꢀ7  
CL550 –ꢀ0209 –ꢀ1  
CL550 –ꢀ0211 –ꢀ3  
CL550 –ꢀ0278 –ꢀ4  
CL550 –ꢀ0279 –ꢀ7  
CL550 –ꢀ0280 –ꢀ6  
K
K
K
K
K
K
Applicator  
K
K
K
K
K
K
K
K
Main Press Unit  
HT102/DF1E –ꢀ2022S  
DF1B –ꢀTA2022SHC  
DF1B –ꢀTA2428SHC  
DF1B –ꢀTA30SHC  
DFꢁEꢀ–ꢀ±0±±SC  
DFꢁBꢀ–ꢀ±0±±SC  
DFꢁBꢀ–ꢀ±4±8SC  
DFꢁBꢀ–ꢀ30SC  
K
K
K
K
K
K
Manual Crimping Tool  
HT102/DF1BE –ꢀ2022P  
HT102/DF1BE –ꢀ2428P  
HT102/DF1BE –ꢀ30P  
DFꢁEꢀ–ꢀ±0±±PC  
DFꢁEꢀ–ꢀ±4±8PC  
DFꢁEꢀ–ꢀ30PCF  
DFꢁEꢀ–ꢀ±0±±SCꢀ(F)  
Contact Extraction Tool  
DF – C – PO (B)  
CL550 –ꢀ0179 –ꢀ2  
DFꢁBꢀ–ꢀ*ꢀ*ꢀ*ꢀ*ꢀSCꢀ(F)  
DFꢁEꢀ–ꢀ*ꢀ*ꢀ*ꢀ*ꢀPCꢀ(F)  
K
Note 1. : Add "K" to the last number of the product, in order to use DF1B series tools, which have been conventionally merchandized.  
Note 2. : f any trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any products.  
14  
BApplication pattern  
ꢀStandard header  
8.5  
DFꢁEꢀ_ꢀπꢀSꢀ_ꢀ±.5ꢀC  
DFꢁEꢀ_ꢀπꢀRSꢀ/ꢀPꢀ_ꢀ±.5  
ꢁ8.8  
ꢁ7.3  
DFꢁE#ꢀ_ꢀπꢀPꢀ_ꢀ±.5ꢀDSA  
DFꢁEꢀ_ꢀπꢀPꢀ_ꢀ±.5ꢀDS  
DFꢁEꢀ_ꢀπꢀRSꢀ/ꢀPꢀ_ꢀ±.5  
DFꢁEꢀ_ꢀπꢀSꢀ_ꢀ±.5ꢀC  
ꢁ0.8  
ꢁ4.3  
3.7  
3
ꢀHeader for potting  
8
DFꢁEꢀ_ꢀπꢀSꢀ_ꢀ±.5ꢀC  
DFꢁEꢀ_ꢀπꢀRSꢀ/ꢀPꢀ_ꢀ±.5  
PottingꢀResin  
3.±  
DFꢁE#ꢀ_ꢀπꢀPꢀ_ꢀ±.5ꢀDSA  
ꢀPanel mounting lock in-line plug  
ꢀIn-line plug  
±5.3  
ꢁ7  
±5.3  
DFꢁEꢀ_ꢀπꢀRSꢀ/ꢀPꢀ_ꢀ±.5  
DFꢁEꢀ_ꢀπꢀRSꢀ/ꢀPꢀ_ꢀ±.5  
DFꢁEꢀ_ꢀπꢀRSꢀ/ꢀPꢀ_ꢀ±.5  
DFꢁEꢀ_ꢀπꢀRSꢀ/ꢀPꢀ_ꢀ±.5  
DFꢁEꢀ_ꢀπꢀSꢀ_ꢀ±.5ꢀC  
DFꢁEꢀ_ꢀπꢀSꢀ_ꢀ±.5ꢀC  
DFꢁEAꢀ_ꢀπꢀEPꢀ_ꢀ±.5ꢀC  
±±.3  
DFꢁEꢀ_ꢀπꢀEPꢀ_ꢀ±.5ꢀC  
ꢁ5.5  
±±.3  
15  
BPrecautions for use  
1. Recommended soldering condition  
: ꢀFlow condition with automatic solder machine  
Soldering temperature: 25± 5ç, soldering time: within 3 seconds  
ꢀManual soldering condition  
Soldering temperature: 290± 10ç, soldering time: within 2 seconds  
2. Cleaning condition  
: Refer to the "Nylon Connector Instruction Manual" contained in the other nylon  
connector catalog.  
However, if the connector is cleaned by the potting header, the detergent remains  
within the connector, which will cause malfunction.  
3. Connection condition  
4. Cautions  
: Refer to the "Nylon Connector Instruction Manual" contained in the other nylon  
connector catalog.  
: ꢀ To remove the connector, if the connector is forcedly removed, it will cause  
connector damage. If the connector is hardly removed, slightly push the connector  
once, and then remove it using the lock.  
ꢀ In some method for laying the cable within equipment, a tension may be applied to  
the cable so as to remove the contact. In this case, it is recommended to use the  
retainer.  
ꢀ If the potting process is implemented, it is desirable to fill the connector with resin,  
considering the resin surface tensile force.  
ꢀ The color phase of this product may be slightly different from that of the forming  
product according to the manufacturing lot and future storage conditions, however  
the difference doesn't affect the performance.  
B127  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明