DF1E-2RS/P-2.5 [HRS]
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection; 2.5mm间距连接器完全锁定和离散电线连接
| 型号： | DF1E-2RS/P-2.5 |
| 厂家： | 
HRS |
| 描述： | 2.5mm Pitch Connector for Full Lock and Discrete Wire Connection |
| 文件： | 总16页 (文件大小：397K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
DF1E Series
Full lock function
added
Inner-lock system
full lock mechanism
Mis-insertion
prevention
ꢀFeatures
1. Full Lock Function Added
Double lock
engaged
The inner lock system adopts a full lock mechanism.
This mechanism prevents disengagement to occur due to
an unexpected external shock.
Double lock
engaged
2. Increase in Crimping Contact Fixation Force and
Semi-insertion Prevention
The double lock is activated for the use method to give a
stress to the cable, to increase crimping contact fixation
force, and to prevent the semi-insertion of the crimping
contact.
3. Mold Lance Adopted
Since the contact lance may be deformed involving in the
contact after the crimping process, the mold lance has been
adopted.
4. Mis-insertion Prevention
Equipped with the mechanism to completely prevent reverse
insertion and insertion between dissimilar contacts.
8. Correspond to Automatic Insertion Machine
5. Means to Prevent Solder Crack
The radial tape packaging is provided for 2 to
8 contacts on the straight pin header side, in
order to correspond to mass production.
The glass enforcement resin is adopted for the pin header to
prevent a solder crack to occur due to heat compression.
6. Correspond to Potting
9. Various Applications
Corresponding to potting, the pin header is provided for
product variations.
Corresponding to potting up to 8mm and mounting height
19.8mm (no retainer), the low profile is achieved.
With the same series, various applications can
be used for the board solder dip type and in-
line.
7. Production Facility Cost Reduction
ꢀApplications
The female crimping contact uses the DF1B series crimping
contact, which has been conventionally marketed.
Investment for new facilities isn't needed. However, if the
retainer is installed in the cable with AWG#22 or more wire,
use the DF1E crimping contact. The female crimping
contact for in-line is used together with the DF1B applicator.
Therefore, no investment is needed for new facilities.
Electronic equipment, office machines,
industrial equipment, and consumer
equipment, and so on
B116
ꢀProducts Specifications
Current rating Note 1.
AWG#20 to 24 :
3A
2A
26 :
28 :
Operating Temperature Range: -35 to +85ç Note 2.
Storage Temperature Range : -10 to +60ç Note 3.
Storage Moisture Range : -40 to 70%
Rating
1A Operating Moisture Range : -20 to 80%
30 : 0.5A
Voltage rating 250VAC
ꢀC-UL File No.
UL :E52653
C-UL Rating
AWG#20 to #22 : 3A
AWG#24 to #28 : 1A
Current rating
Voltage rating
Rating
AWG#30
30V AC
: 0.5A
Item
Specification
Condition
1. Contact Resistance
2. Insulation Resistance
3. Withstanding voltage
4. Single Insertor/Extraction Forth
5. Durability (Mating/un-mating)
6. Vibration
30m ohms max.
Measured at 20mV max. and 1mA
500V DC
1000M ohms min.
650V AC/1 minute
No flashover or insulation breakdown.
MIN 0.4N, MAX 4.4N
Measured at the square steel pin with 0.635 0.002
30 cycles
30m ohms max
No electrical discontinuity of 1µs or more
No electrical discontinuity of 1µs or more
30m ohms max
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
2
7. Shock
Acceleration of 490 m/s , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis
8.
Humidity (Steady state)
96 hours at temperature of 40ç and humidity of 90% to 95%
9. Temperature Cycle
30m ohms max.
(-55ç: 30 minutes-> 5 to 35ç: 5 minutes-> 85ç: 30 minutes-> 5 to 35ç: 5 minutes) 5 cicles
10. Resistance to Soldering heat
Flow: 250ç for 10 seconds
No deformation of components affecting performance.
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
ꢀMaterial
Product
Part
Material
Polyamide
Polyamide
Brass
Treatment
White
Remarks
UL94V-0
UL94V-0
–––––––
UL94V-0
UL94V-0
–––––––
Socket
Insulator
Insulator
Contact
Insulator
Insulator
Contact
Beige
Header
Tin-lead plated
White
In-line Plug
retainer
Polyamide
Polyamide
Phosphor copper
Black
Crimping contact
Tin plated
Note : The whisker method is implemented for HRS tin plating.
B117
ꢀOrdering Information
ꢀPin Header
q Series Name : DF
w Series No. : 1E
e Hold Types
r Number of Contacts : 2 to 15 contacts
DF 1E C - * P - 2.5 DSA
t Connector Type
P : Pin Header
q
w
e
r
t
y
u
y Contact Pitch : 2.5mm
u Form type
Standard Product
With Boss
Potting
With Boss
DSA : Straight through hole
DS : Right Angle Type
C
Without Boss
G
Without Boss
Note 1 : The right angle pin header has no symbol.
Note 2 : The potting header has 2 to 10 contacts.
ꢀSocket
q Series Name : DF
w Series No. : 1E
r Connector type
S: Socket
DF 1E - * S - 2.5 C
q
w
e
r
t
y
e
Number of Contacts : 2 to 15 contacts
t Contact Pitch : 2.5mm
y Form Type
C : Crimping socket
ꢀIn-line Plug
q Series Name : DF
w Series No. : 1E
r Number of Contacts : 2 to 10 contacts
DF 1E A - * EP - 2.5 C
t EP : In-line plug
y Contact Pitch : 2.5mm
u Form Type
q
w
e
r
t
y
u
e In-line Plug type
Blank: With Panel mount Lock
A : Without Panel mount Lock
C : Crimping socket
ꢀCrimping Contact
q Series Name : DF
e Applicable Cable Size
2022 : AWG#20 to #22
2428 : WG#24 to #28
DF 1E - ** SCF
w Series No.
:
q
w
e
r
Socket side : 1B (Note 1)
1E (Note 1)
30
: AWG#30
Plug side
: 1E
r Packaging Type
SCF : Female contact : Reel
SF
: Female contact : Bag
PCF : Male contact : Reel
PC : Male contact : Bag
Note 1 : When the retainer is used, use DF1E-2022SC(F), DF1B-
2428SC(F), and DF1B-30SC(F) contacts.
Note 1 : When no retainer is used, all DF1B-**SC(F) and DF1E-
2022SC(F) contacts can be used.
ꢀRetainer
q Series Name : DF
w Series No. : 1E
r Connector Type
DF 1E - * RS/P - 2.5
RS/P : Retainer
q
w
e
r
t
e
Number of Contacts : 2 to 10 contacts
Commonly used for socket and in-line plug
t Contacts Pitch:2.5mm
B118
ꢀApplication Pattern
Socket
Retainer
Photo : Contact Inserted
Pin Header
In-line Plug
ꢀStraight Type
ꢀIn-line Plug (Panel Mount Lock Type)
Photo: Contact Inserted
ꢀStraight Potting Type
ꢀIn-line Plug
Photo: Contact Inserted
ꢀRight Angle Type
B119
ꢀRight Angle Pin Header
5.4
Mold Cavity
No. mark
Contact No. mark
A
10
M
0.64
2.5
P =
A
B
Contact No.1 indicated
Note 2
The symbol ** included in
HRS No. and the product spec
No. indicates the Specific No.
Part Number
CL No.
Number of Contacts
A
B
DF1E –02P–2.5DS(**)
DF1E –03P–2.5DS(**)
DF1E –04P–2.5DS(**)
DF1E –05P–2.5DS(**)
DF1E –06P–2.5DS(**)
DF1E –07P–2.5DS(**)
DF1E –08P–2.5DS(**)
DF1E –09P–2.5DS(**)
DF1E –10P–2.5DS(**)
DF1E –11P–2.5DS(**)
DF1E –12P–2.5DS(**)
DF1E –13P–2.5DS(**)
DF1E –14P–2.5DS(**)
DF1E –15P–2.5DS(**)
541 – 0985– 0 –**
541 – 0986– 3 –**
541 – 0987– 6 –**
541 – 0988– 9 –**
541 – 0989– 1 –**
541 – 0990– 0 –**
541 – 0991– 3 –**
541 – 0992– 6 –**
541 – 0993– 9 –**
541 – 0994– 1 –**
541 – 0995– 4 –**
541 – 0996– 7 –**
541 – 0997– 0 –**
541 – 0998– 2 –**
2
3
02.5
05.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
32.5
35.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
32.5
35.0
37.5
40.0
4
5
6
7
8
9
10
11
12
13
14
15
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to the Specific No.
Note 2. : The 2 to 4 contacts differ in two convex portions from those in above figures. The 2 and 3 contacts are not contained, but the 4
contact connector is contained in the center at one point.
Note 3. : Styles of 2 to 4 contact connectors partially differ from those in above figures.
BPCB mounting pattern (Board Thickness t = 1.6 0.1)
A
0.1
P =
2.5 0.05
B120
5.4
ꢀStraight Pin Header
Mold Cavity
No. mark
Contact No. mark
10
A
P =
2.5
A
B
Contact No.1 indicated
M
0.64
Note 2
The symbol ** included in
HRS No. and the product spec
No. indicates the Specific No.
Part Number
CL No.
Number of Contacts
A
B
DF1EC–02P–2.5DSA(**)
DF1EC–03P–2.5DSA(**)
DF1EC–04P–2.5DSA(**)
DF1EC–05P–2.5DSA(**)
DF1EC–06P–2.5DSA(**)
DF1EC–07P–2.5DSA(**)
DF1EC–08P–2.5DSA(**)
DF1EC–09P–2.5DSA(**)
DF1EC–10P–2.5DSA(**)
DF1EC–11P–2.5DSA(**)
DF1EC–12P–2.5DSA(**)
DF1EC–13P–2.5DSA(**)
DF1EC–14P–2.5DSA(**)
DF1EC–15P–2.5DSA(**)
541– 0867– 4 –**
541– 0868– 7 –**
541– 0869– 0 –**
541– 0870– 9 –**
541– 0871– 1 –**
541– 0872– 4 –**
541– 0873– 7 –**
541– 0874– 0 –**
541– 0875– 2 –**
541– 0876– 5 –**
541– 0877– 8 –**
541– 0878– 0 –**
541– 0879– 3 –**
541– 0880– 2 –**
2
3
02.5
05.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
32.5
35.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
32.5
35.0
37.5
40.0
4
5
6
7
8
9
10
11
12
13
14
15
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to the Specific No.
Note 2. : The 2 to 4 contacts differ in two convex portions from those in above figures. The 2 and 3 contacts are not contained, but the 2
and 3 contacts are not contained, and 4 contact is in the center at one point.
Note 3. : Styles of 2 to 4 contacts partially differ from those in above figures.
Note 4. : The radial package is prepared for DF1EC-*P-2.5DSA(25).However, 2 to 8 contacts only are provided. (Quantity of packaged 2
and 3 contacts: 1000pcs., 4 to 8 contacts: 400pcs.)
BPCB mounting pattern (Board Thickness t = 1.6 0.1)
A
0.1
P =
2.5 0.05
B121
ꢀStraight Pin Header for Potting
5.4
Mold Cavity
No. mark
Contact No. mark
A
10
P= 2.5
A
B
Contact No.1 indicated
M
0.64
Note 2
Note 2
The symbol **
included in HRS No.
and the product
spec No. indicates
the Specific No.
Part Number
CL No.
Number of Contacts
A
B
C
DF1EG –02P–2.5DSA(**)
DF1EG –03P–2.5DSA(**)
DF1EG –04P–2.5DSA(**)
DF1EG –05P–2.5DSA(**)
DF1EG –06P–2.5DSA(**)
DF1EG –07P–2.5DSA(**)
DF1EG –08P–2.5DSA(**)
DF1EG –09P–2.5DSA(**)
DF1EG –10P–2.5DSA(**)
DF1EG –11P–2.5DSA(**)
541 – 0923 – 3**
541 – 0924 – 6**
541 – 0925 – 9**
541 – 0926 – 1**
541 – 0927 – 4**
541 – 0928 – 7**
541 – 0929 – 0**
541 – 0930 – 9**
541 – 0931 – 1**
541 – 0932 – 4**
2
3
02.5
05.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
7.8
7.8
7.8
8.0
8.0
8.0
8.0
8.0
8.0
8.0
4
5
6
7
8
9
10
11
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. However, the quantity
for delivery will be changed according to spec number.
Note 2. : The 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. The 2 to 5 and 9 to 10
contacts are not contained, but the 6 contact is bonded to the convex portion at both ends.
Note 3. : Styles of 2 to 4 contact may partially differ from the above figures.
Note 4. : The radial tape packaging is prepared for DF1EG-*P-2.5DSA(25).However, 2 to 8 contacts are available. (Quantity of packaged 2
and 3 contacts : 1000pcs., 4 to 8 contacts: 400pcs.)
BPCB mounting pattern (Board Thickness t = 1.6 0.1)
A
0.1
P =
2.5 0.05
B122
ꢀIn-line Plug (Panel Mount Lock Type)
A
B
2.8
2.8
P =
2.5
Mold Cavity
No. mark
Contact No. mark
A
1 0
C
Contact No.1 indicated
10
9
7
5
3
1
Contact No. indicated
Photo: Contact Inserted.
Contact No.1 indicated
Note 2
Note 3
Part Number
CL No.
Number of Contacts
A
B
C
D
E
DF1E–02EP–2.5C(**)
DF1E–03EP–2.5C(**)
DF1E–04EP–2.5C(**)
DF1E–05EP–2.5C(**)
DF1E–06EP–2.5C(**)
DF1E–07EP–2.5C(**)
DF1E–08EP–2.5C(**)
DF1E–09EP–2.5C(**)
DF1E–10EP–2.5C(**)
541– 0943– 0 –**
541– 0944– 3 –**
541– 0945– 6 –**
541– 0946– 9 –**
541– 0947– 1 –**
541– 0948– 4 –**
541– 0949– 7 –**
541– 0950– 6 –**
541– 0951– 9 –**
2
3
8.0
2.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
32.5
35.0
8.4
11.9
14.4
16.9
19.4
21.9
24.4
26.9
29.4
31.9
10.5
13.0
15.5
18.0
20.5
23.0
25.5
28.0
5.0
10.9
13.4
15.9
18.4
20.9
23.4
25.9
28.4
4
7.5
5
10.0
12.5
15.0
17.5
20.0
22.5
6
7
8
9
10
The symbol ** included in HRS No. and the product spec No. indicates the Specific No.
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to the Specific No.
Note 2. : In regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends.
Note 3. In regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures.
Note 4. Use the no radius side at the panel edge in the looking area.
Note 5. : Panel fixation is loosened. (May be enlarged according to the panel board thickness.)
Note 6. : Styles of 2 to 4 contact partially differ from those in the above figures.
* Refer to page B122 for the retainer.
BPanel Cutout
+0.1
( E +
0
+0.1
D
0
5.8 +0.2
0
Panel Thickness
1.7 to 2.0
1.3 to 1.6
0.9 to 1.2
0.7 to 0.8
X
1.5
Panel
1.0
0.5
0.0
Note 4
B123
ꢀIn-line Plug
A
B
P =
2.5
Mold Cavity
No. mark
Contact No. mark
A
1 0
Contact No.1 indicated
Photo: Contact Inserted
1 0
9
7
5
3
1
Contact No. mark
Contact No.1 indicated
Note 2
Note 3
The symbol ** included in
HRS No. and the product spec
No. indicate a Specific No.
Part Number
CL No.
Number of Contacts
A
B
DF1EA –02EP–2.5C(**)
DF1EA –03EP–2.5C(**)
DF1EA –04EP–2.5C(**)
DF1EA –05EP–2.5C(**)
DF1EA –06EP–2.5C(**)
DF1EA –07EP–2.5C(**)
DF1EA –08EP–2.5C(**)
DF1EA –09EP–2.5C(**)
DF1EA –10EP–2.5C(**)
541 – 0957 – 5 – **
541 – 0958 – 8 – **
541 – 0959 – 0 – **
541 – 0960 – 0 – **
541 – 0961 – 2 – **
541 – 0962 – 5 – **
541 – 0963 – 8 – **
541 – 0964 – 0 – **
541 – 0965 – 3 – **
2
3
08.0
10.5
13.0
15.5
18.0
20.5
23.0
25.5
28.0
02.5
05.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
4
5
6
7
8
9
10
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to the Specific No.
Note 2. : In regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends.
Note 3. : 2 to 7 contacts do not contain two convex portions, which is different from the above figure.
Note 4. : Styles of 2 to 4 contacts partially differ from the above figures.
* Refer to page B122 for retainer.
B124
ꢀSocket
P =
2.5
A
B
C
Note 2
10
1
Photo: Contact Inserted
Contact No. mark
No. 1 contact indicated
7.55
Mold Cavity
No. mark
Note 3
Note 4
Note 3
Note 4
The symbol **
included in HRS No.
and the product
spec No. indicate a
Specific No.
Part Number
CL No.
Number of Contacts
A
B
C
DF1E –02S–2.5C(**)
DF1E –03S–2.5C(**)
DF1E –04S–2.5C(**)
DF1E –05S–2.5C(**)
DF1E –06S–2.5C(**)
DF1E –07S–2.5C(**)
DF1E –08S–2.5C(**)
DF1E –09S–2.5C(**)
DF1E –10S–2.5C(**)
DF1E –11S–2.5C(**)
DF1E –12S–2.5C(**)
DF1E –13S–2.5C(**)
DF1E –14S–2.5C(**)
DF1E –15S–2.5C(**)
541 – 0811 – 0 – **
541 – 0812 – 2 – **
541 – 0813 – 5 – **
541 – 0814 – 8 – **
541 – 0815 – 0 – **
541 – 0816 – 3 – **
541 – 0817 – 6 – **
541 – 0818 – 9 – **
541 – 0819 – 1 – **
541 – 0820 – 0 – **
541 – 0821 – 3 – **
541 – 0822 – 6 – **
541 – 0823 – 9 – **
541 – 0824 – 1 – **
2
3
02.5
05.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
32.5
35.0
08.0
10.5
13.0
15.5
18.0
20.5
23.0
25.5
28.0
30.5
33.0
35.5
38.0
40.5
05.4
07.9
10.4
12.9
15.4
17.9
20.4
22.9
25.4
27.9
30.4
32.9
35.4
37.9
4
5
6
7
8
9
10
11
12
13
14
15
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to spec number.
Note 2. : The 2 contact connector is equipped with the convex portion to prevent false-insertion.
Note 3. : The 2 consult Has no wall on the locking side
Note 4. : The 2 to 5 contacts contain the retainer fixed convex portions at both ends.
* Refer to page B122 for the retainer.
B125
ꢀRetainer
A
1.9
B
1.7
0.7
P = 2.5
Note2
Note2
Contact No. mark
1 0
A
Mold Cavity
No. mark
The symbol ** included in
HRS No. and the product spec
No. indicates the Specific No.
Part Number
CL No.
Number of Contacts
A
B
DF1E –02RS/P–2.5(**)
DF1E –03RS/P–2.5(**)
DF1E –04RS/P–2.5(**)
DF1E –05RS/P–2.5(**)
DF1E –06RS/P–2.5(**)
DF1E –07RS/P–2.5(**)
DF1E –08RS/P–2.5(**)
DF1E –09RS/P–2.5(**)
DF1E –10RS/P–2.5(**)
541 – 0971 – 6
541 – 0972 – 9
541 – 0973 – 1
541 – 0974 – 4
541 – 0975 – 7
541 – 0976 – 0
541 – 0977 – 2
541 – 0978 – 5
541 – 0979 – 8
2
3
08.0
10.5
13.0
15.5
18.0
20.5
23.0
25.5
28.0
02.5
05.0
07.5
10.0
12.5
15.0
17.5
20.0
22.5
4
5
6
7
8
9
10
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity
for delivery will be changed according to spec number.
Note 2. : The 2 to 4 contacts contain socket and plug fixed holes at both ends.
* This retainer can be used together with the socket and relay plug.
B126
ꢀPlug Crimping Contact
1.5
2.2
0.64
0.64
ꢀApplicable Cable (Tin plating annealed copper wire)
ꢀRecommended Cable
UL1061, UL1007
Conductor Size (Wire construction)
AWG # 20 (21 cores./0.18mm)
AWG # 22 (17 cores./0.16mm)
AWG # 24 (11 cores./0.16mm)
AWG # 26 (07 cores./0.16mm)
AWG # 28 (07 cores./0.127mm)
AWG # 30 (07 cores./0.1mm)
ꢀStrip Length
3.0 to 3.7mm
Note : If other cables are used instead of the applicable
cable, contact Hirose sales department.
Applicable Cable
Applicable
Cable Indication
Packaging
Type
Part Number
CL No.
Quantity
AWG
Jacket Diameter
Reel
Bag
Reel
Bag
Reel
Bag
10,000
100
DF1E – 2022PCF
DF1E – 2022PC
DF1E – 2428PCF
DF1E – 2428PC
DF1E – 30PCF
DF1E – 30PC
541 – 0937 – 8
541 – 0938 – 0
541 – 0939 – 3
541 – 0940 – 2
541 – 0941 – 5
541 – 0942 – 8
20
22
AWG # 20
AWG # 22
1.2 to 1.9mm
10,000
100
24
28
AWG # 24
AWG # 28
0.9 to 1.5mm
0.6 to 1.2mm
10,000
100
30
AWG # 30
ꢀꢀCrimping Contact Extraction Tool DF-C-PO(B)
B127
ꢀSocket Crimping Contact
ꢀDF1E-2022SCF
ꢀDF1B - * * * * SCF
1.75
0.975
1.75
1.4
1.95
Applicable cable indicated
0.83
1.95
Applicable cable indicated
0.55
ꢀApplicable Cable (Tin plating annealed copper wire)
ꢀRecommended Cable
UL1061, UL1007
Conductor Size (Wire construction)
AWG # 20 (21 cores./0.18mm)
AWG # 22 (17 cores./0.16mm)
AWG # 24 (11 cores./0.16mm)
AWG # 26 (07 cores./0.16mm)
AWG # 28 (07 cores./0.127mm)
AWG # 30 (07 cores./0.1mm)
ꢀStrip Length
2.0mm to 2.5mm
Note : If other cables are used instead of the applicable
cable, consult Hirose sales department.
Applicable Cable
Applicable
Cable Indication
Packaging
Type
Part Number
CL No.
Quantity
AWG
Jacket Diameter
Reel
Bag
Reel
Bag
Reel
Bag
Reel
Bag
10,000
100
DF1E – 2022SCF
DF1E – 2022SC
DF1B – 2022SCF
DF1B – 2022SC
DF1B – 2428SCF
DF1B – 2428SC
DF1B – 30SCF
DF1B – 30SC
541 – 0999 – 5
541 – 1000 – 2
541 – 0223 – 1
541 – 0224 – 4
541 – 0678 – 1
541 – 0679 – 4
541 – 0682 – 9
541 – 0683 – 1
20
22
AWG # 20
AWG # 22
1.2 to 1.9mm
10,000
100
20
22
AWG # 20
AWG # 22
1.2 to 1.9mm
0.9 to 1.5mm
0.6 to 1.2mm
10,000
100
24
28
AWG # 24
AWG # 28
10,000
100
30
AWG # 30
ꢀꢀCrimping Contact Extraction Tool DF-C-PO(B)
B128
BCrimping Tools
Item
Part Number
AP105 – DF1E – 2022S
AP105 – DF1B – 2022S
AP105 – DF1B – 2428S
AP105 – DF1B – 30S
AP105 – DF1B – 2022P
AP105 – DF1B – 2428P
AP105 – DF1B – 30P
CM – 105
CL No.
Applicable Contact
DF1E – 2022SCF
DF1B – 2022SCF
DF1B – 2428SCF
DF1B – 30SCF
DF1E – 2022PCF
DF1E – 2428PCF
DF1E – 30PCF
––––––
901 – 4561 – 0
901 – 4510 – 9
901 – 4518 – 0
901 – 4517 – 8
901 – 4509 – 0
901 – 4521 – 5
901 – 4519 – 3
901 – 0005 – 4
550 – 0277 – 1
550 – 0182 – 7
550 – 0209 – 1
550 – 0211 – 3
550 – 0278 – 4
550 – 0279 – 7
550 – 0280 – 6
K
K
K
K
K
K
Applicator
K
K
K
K
K
K
K
K
Main Press Unit
HT102/DF1E – 2022S
DF1B – TA2022SHC
DF1B – TA2428SHC
DF1B – TA30SHC
DF1E – 2022SC
DF1B – 2022SC
DF1B – 2428SC
DF1B – 30SC
K
K
K
K
K
K
Manual Crimping Tool
HT102/DF1BE – 2022P
HT102/DF1BE – 2428P
HT102/DF1BE – 30P
DF1E – 2022PC
DF1E – 2428PC
DF1E – 30PCF
DF1E – 2022SC (F)
Contact Extraction Tool
DF – C – PO (B)
550 – 0179 – 2
DF1B – * * * * SC (F)
DF1E – * * * * PC (F)
K
Note 1. : Add "K" to the last number of the product, in order to use DF1B series tools, which have been conventionally merchandized.
Note 2. : f any trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any products.
B129
BApplication Pattern
ꢀStandard Header
8.5
DF1E _ * S _ 2.5 C
DF1E _ * RS / P _ 2.5
18.8
17.3
DF1E# _ * P _ 2.5 DSA
DF1E _ * P _ 2.5 DS
DF1E _ * RS / P _ 2.5
DF1E _ * S _ 2.5 C
10.8
14.3
3.7
3
ꢀHeader for Potting
8
DF1E _ * S _ 2.5 C
DF1E _ * RS / P _ 2.5
Potting Resin
3.2
DF1E# _ * P _ 2.5 DSA
ꢀPanel Mounting Lock In-line Plug
ꢀIn-line Plug
25.3
17
25.3
DF1E _ * RS / P _ 2.5
DF1E _ * RS / P _ 2.5
DF1E _ * RS / P _ 2.5
DF1E _ * RS / P _ 2.5
DF1E _ * EP _ 2.5 C
DF1E _ * S _ 2.5 C
DF1E _ * S _ 2.5 C
DF1EA _ * EP _ 2.5 C
22.3
15.5
22.3
B130
BPrecautions
1. Recommended Soldering Condition
:
Flow: 250ç for 3 seconds
Manual soldering: 290ç for 2 seconds
2. Cleaning Condition
: Refer to Nylon Connector Use Hand book.
However, if the connector is cleaned by the potting header, the detergent remains
within the connector, which will cause malfunction.
3. Connection Condition
4. Cautions
: Refer to Nylon Connector Use Hand book.
: ꢀ To remove the connector, if the connector is forcedly removed, it will cause
connector damage. If the connector is hardly removed, slightly push the connector
once, and then remove it using the lock.
ꢀ In some method for laying the cable within equipment, a tension may be applied to
the cable so as to remove the contact. In this case, it is recommended to use the
retainer.
ꢀ If the potting process is implemented, it is desirable to fill the connector with resin,
considering the resin surface tensile force.
ꢀ The color phase of this product may be slightly different from that of the forming
product according to the manufacturing lot and future storage conditions, however
the difference doesn't affect the performance.
B131
相关型号：
DF1E-3EP-2.5C
Board Connector, 3 Contact(s), 1 Row(s), Male, 0.098 inch Pitch, Crimp Terminal, Locking, White Insulator, Plug, ROHS COMPLIANT
HRS
DF1E-3P-2.5DS
Board Connector, 3 Contact(s), 1 Row(s), Male, Right Angle, 0.098 inch Pitch, Solder Terminal, Locking, Beige Insulator, Receptacle
HRS
DF1E-3P-2.5DS(01)
Board Connector, 3 Contact(s), 1 Row(s), Male, Right Angle, Solder Terminal, ROHS COMPLIANT
HRS
©2020 ICPDF网 联系我们和版权申明