DF14-25S-1.25H [HRS]
1.25mm Pitch Super Low profile Crimping Connector; 1.25mm间距超低调压接连接器型号: | DF14-25S-1.25H |
厂家: | HRS |
描述: | 1.25mm Pitch Super Low profile Crimping Connector |
文件: | 总6页 (文件大小:196K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1.25mm Pitch Super Low profile Crimping Connector
DF14 Series
■Features
1. Super Low Profile
This is a connector special for right angle which has pursued a low
profile on the board.
Board mounting height: 2.5mm
A signal can be fetched from the area where there is no board to
board space.
Board Mounting Figure
2. Correspond to Automatic Mounting
The header has the vacuum mount face which enables the vacuum
absorption and the automatic mounting by the embossed tape
packaging.In addition, the tube packaging can be selected.
3. Four Wall Type Without Friction to Board by Socket
The header has the box structure to prevent from being twisted and
has the perfect mis-insertion prevention method. Moreover the
header has the wall on the board side and doesn't have any trouble
resulted from the friction to board by socket.
1
In addition, the metal fitting is attached to prevent the solder peel.
■Applications
LCD, Note PC, Mobile Terminal Small business equipment, Video camera
B177
■Product Specifications
Current rating
1A
Operating Temperature Range-25 to +85ç (Note 1) Storage Temperature Range -10 to +60ç (Note 2)
Rating
Voltage rating 150V AC
Operating Moisture Range
40 to 80%
Storage Moisture Range
40 to 70%
Item
Specification
Condition
1. Insulation Resistance 500M ohms Min
100V DC
2. Withstanding voltage No flashover or insulation breakdown.
500V AC/1 minute
100mA
3. Contact Resistance
4. Insertion/Extraction Force MIN0.15N (15gf), MAX3N (300gf)
5. Vibration No electrical discontinuity of 1µs or more
30m ohms Max
Measure at the square steel pin of 0.3 0.002mm
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-25ç: 30 minutes■5 to 35ç: 10 minutes■85ç: 30 minutes■
6. Humidity (Steady state) Contact resistance: 30m ohms Max Insulation resistance:500M ohms Min
7. Temperature Cycle
Contact resistance: 30m ohms Max Insulation resistance: 500M ohms Min
5 to 35ç: 10 minutes) 5 cycles
Durability (Mating/un-mating)
8.
Contact resistance: 30m ohms Max
Tin plating: 30 cycles Gold plating: 50 cycles
Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
9. Resistance to Soldering heat No deformation of components affecting performance.
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
■Material
Product
Part
Material
Polyamide
Finish
Beige
Remarks
UL-94V-0
–––––––
UL-94V-0
–––––––
–––––––
Crimping Socket
Insulator
Contact
Insulator
Contact
Fitting
Crimping Contact for Socket
Phosphor Copper
Polyamide
Tin-lead plated or gold plated
Beige
Pin Header
Brass
Tin-lead plated or gold plated
Tin-lead plated
Phosphor copper
Note . Hirose’s tin plating product takes measures against whisker.
■Ordering Information
■Connector
DF14 - * S - 1.25 C
1
2
3
4
5
Series Name: DF14
Contact Pitch: 1.25mm
Contact Type
1
2
3
4
Number of Contacts: 2 to 10, 15, 20, 25, 30
Connector Type
5
C: Crimping socket
H: Right angle SMT
S: Single row socket
P: Single row pin header
■Contact
DF14 - 2628 SCF A
1
2
3
Applicable cable size
2628: AWG26 to 28
3032: AWG30 to 32
Packaging Type
SCF: Socket contact/reel
Plating Type
2
3
1
Blank: Tin plated
A: Gold plated
B178
■Crimping Socket
Photo: Contact insertion state
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
DF14- 2S-1.25C(**)
DF14- 3S-1.25C(**)
DF14- 4S-1.25C(**)
DF14- 5S-1.25C(**)
DF14- 6S-1.25C(**)
DF14- 7S-1.25C(**)
DF14- 8S-1.25C(**)
DF14- 9S-1.25C(**)
DF14-10S-1.25C(**)
DF14-15S-1.25C(**)
DF14-20S-1.25C(**)
DF14-25S-1.25C(**)
DF14-30S-1.25C(**)
538-0005-8-**
538-0006-0-**
538-0007-3-**
538-0008-6-**
538-0009-9-**
538-0010-8-**
538-0011-0-**
538-0013-6-**
538-0014-9-**
538-0054-3-**
538-0059-7-**
538-0064-7-**
538-0012-3-**
2
3
4.45
1.25
5.70
2.50
4
6.95
3.75
5
8.20
5.00
6
9.45
6.25
7
10.70
11.95
13.20
14.45
20.70
26.95
33.20
39.45
7.50
8
8.75
9
10.00
11.25
17.50
23.75
30.00
36.25
10
15
20
25
30
[Specific No.]–**,(**)
Blank : 1 bag 100 pcs.
Note 1.The quantity at the specific No. "Blank" is delivered per bag. If needed, please order the products per bag.
■Socket Crimping Contact
Part Number
DF14-2628SCF
DF14-3032SCF
CL No.
Packaging Type
Reel
Quantity
10,000
Finish
538-0001-7-**
538-0003-2-**
Tin plated
Reel
K
Applicable Cable (Tin plating Annealed copper wire)
K
Recommended Cable
Conductor Size (Wire construction)
Jacket Diameter
UL1571
AWG26(7 cores/0.16mm)
AWG28(7 cores/0.127mm)
AWG30(7 cores/0.1mm)
AWG32(7 cores/0.08mm)
K
Strip Length
Ø0.54 to Ø1mm
1.2 to 1.9mm
Note:If other cables are used instead of the applicable cable, contact Hirose
sales department.
BApplicable Crimping Tool
Type
Part Number
AP105-DF14-2628S
AP105-DF14-3032S
CM-105
CL No.
Applicable Contact
DF14-2628SCF/SCFA
DF14-3032SCF/SCFA
---------------------------------------------
DF14-2628SCF/SCFA
DF14-3032SCF/SCFA
901-4548-1
901-4544-0
901-0005-4
550-0261-1
550-0262-4
Applicator
Press Main Unit
DF14-2628/CR-HT
DF14-3032/CR-HT
Manual Crimping Tool
Note 1.If a trouble has occurred due to tools, which are not designated by Hirose, Hirose won't guarantee any product.
Note 2.Use the reel contact sequentially cut for manual crimping tool.
B179
■Right Angle Pin Header (SMT)
Note 1."Without boss" indicates the style with no boss.
BPCB mounting pattern
BTube Packaging Dimensions
[Specific No.]–**,(**)
(20): Tin plated tube packaging
(21): Tin plated embossed tape packaging
(50): Gold plated tube packaging
(59): Gold plated embossed tape packaging
Note 2."Without boss" indicates that no hole is needed.
Unit: mm
With boss
Part Number
Without boss
Part Number
Tube Packaging
Number of Contacts
A
B
C
D
CL No.
CL No.
Quantity
66
DF14- 2P-1.25H(**) 538-0021-4-** DF14A- 2P-1.25H(**) 538-0033-3-**
DF14- 3P-1.25H(**) 538-0022-7-** DF14A- 3P-1.25H(**) 538-0034-6-**
DF14- 4P-1.25H(**) 538-0023-0-** DF14A- 4P-1.25H(**) 538-0035-9-**
DF14- 5P-1.25H(**) 538-0024-2-** DF14A- 5P-1.25H(**) 538-0036-1-**
DF14- 6P-1.25H(**) 538-0025-5-** DF14A- 6P-1.25H(**) 538-0037-4-**
DF14- 7P-1.25H(**) 538-0026-8-** DF14A- 7P-1.25H(**) 538-0038-7-**
DF14- 8P-1.25H(**) 538-0027-0-** DF14A- 8P-1.25H(**) 538-0039-0-**
DF14- 9P-1.25H(**) 538-0028-3-** DF14A- 9P-1.25H(**) 538-0040-9-**
DF14-10P-1.25H(**) 538-0029-6-** DF14A-10P-1.25H(**) 538-0041-1-**
DF14-15P-1.25H(**) 538-0084-4-** DF14A-15P-1.25H(**) 538-0114-3-**
DF14-20P-1.25H(**) 538-0089-8-** DF14A-20P-1.25H(**) 538-0119-7-**
DF14-25P-1.25H(**) 538-0094-8-** DF14A-25P-1.25H(**) 538-0124-7-**
DF14-30P-1.25H(**) 538-0020-1-** DF14A-30P-1.25H(**) 538-0045-2-**
2
3
7.45
8.70
1.25
2.50
3.75
5.00
6.25
7.50
8.75
6.45
7.70
8.95
8.05
9.30
56
4
9.95
10.55
49
5
11.20
12.45
13.70
14.95
10.20 11.80
11.45 13.05
12.70 14.30
13.95 15.55
44
6
39
7
36
8
32
9
16.20 10.00 15.20 16.80
17.45 11.25 16.45 18.05
23.70 17.50 22.70 24.30
29.95 23.75 28.95 30.55
36.20 30.00 35.20 36.80
42.45 36.25 41.45 43.05
30
10
15
20
25
30
28
20
16
13
11
Note 1.Please order the tube packaging product, multiplying the packaging quantity (pcs.).
Note 2.Please order the embossed tape packaging product according to reel number. (1000 pcs./reel)
B180
BEmbossed Carrier Tape Dimensions
■ 2 to 10 Contacts
■ 15, 20, 25, 30 Contacts
Unit: mm
Inserted Connector
DF14/14A- 2P-1.25H
DF14/14A- 3P-1.25H
DF14/14A- 4P-1.25H
DF14/14A- 5P-1.25H
DF14/14A- 6P-1.25H
DF14/14A- 7P-1.25H
DF14/14A- 8P-1.25H
DF14/14A- 9P-1.25H
DF14/14A-10P-1.25H
DF14/14A-15P-1.25H
DF14/14A-20P-1.25H
DF14/14A-25P-1.25H
DF14/14A-30P-1.25H
Number of Contacts
A
B
C
D
2
3
16
16
24
24
24
24
24
24
24
44
44
56
56
7.5
16.4
16.4
24.4
24.4
24.4
24.4
24.4
24.4
24.4
44.4
44.4
56.4
56.4
–––
–––
–––
–––
–––
–––
–––
–––
–––
40.4
7.5
4
11.5
11.5
11.5
11.5
11.5
11.5
11.5
20.2
20.2
26.2
26.2
5
6
7
8
9
10
15
20
25
30
40.4
52.4
52.4
B181
BPrecautions
1. Recommended Temperature Profile (SMT)
Note 1.The soldering process is allowed up to twice under the same condition. However, the
interval between the first and second processes must be maintained at the room
temperature.
Note 1.The temperature indicates the board surface temperature on the connector lead area.
2. Recommended Manual Soldering Condition (SMT)
3. Recommended Screen Thickness (SMT)
4. Board Sled (SMT)
Manual soldering: 290ç for 2 seconds
0.15 to 0.2mm
Max 0.03mm at the connector center area, based on both connector edges
Refer to Nylon Connector Use Hand book.
5. Cleaning Condition
6. Connection Condition
Refer to Nylon Connector Use Hand book.
■Be careful to carry out the crimping operation according to the "Crimping Condition Sheet"
and "Crimping Quality Reference", because the crimping contact style is too small.
■Be careful for an excessive scoop insertion/extraction, which will cause damage to the
product.
7. Cautions
B182
相关型号:
DF14-2P-1.25H(20)
Board Connector, 2 Contact(s), 1 Row(s), Male, Right Angle, 0.049 inch Pitch, Surface Mount Terminal, Beige Insulator, Receptacle
HRS
DF14-2P-1.25H(21)
Board Connector, 2 Contact(s), 1 Row(s), Male, Right Angle, 0.049 inch Pitch, Surface Mount Terminal, Beige Insulator, Receptacle
HRS
DF14-2P-1.25H(26)
Board Connector, 2 Contact(s), 1 Row(s), Male, Right Angle, Surface Mount Terminal, ROHS COMPLIANT
HRS
©2020 ICPDF网 联系我们和版权申明