DF13-12S-1.25C(41) [HRS]
Board Connector, 12 Contact(s), 1 Row(s), Female, Crimp Terminal, Socket;
| 型号： | DF13-12S-1.25C(41) |
| 厂家： | 
HRS |
| 描述： | Board Connector, 12 Contact(s), 1 Row(s), Female, Crimp Terminal, Socket 连接器 |
| 文件： | 总11页 (文件大小：1746K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NC Nylon Connectors
DF13 Series (1.25mm Pitch)
DF13 SERIES
1.25 mm Pitch Compact Crimp Connectors
Low profile with package height
Type
System
Height (h)
DIP
5.3mm
SMT
DIP
5.8mm
3.6mm
SMT
■ Features
Designed for automatic packaging
Suction plane provided for suction type automatic packaging
machine
1. Compact
Low profile with package height of 5.8 mm (SMT straight type).
DIP straight type: 5.3 mm, DIP right-angle type: 3.6 mm. For
details, see "APPLICATION" on page 52.
Straight type
Suction plane
2. Multi-pin
Double-row type available with up to 40 pins, 30% higher
packaging density than single-row type.
3. Compatible with automatic packaging
Vacuum-operated header allows automatic embossed packaging.
See Fig. 1.
Can be packed in magazines for delivery.
Reinforcement
4. Enhanced functions packed into compact unit
Angle type
Suction plane
Box construction prevents prying-out, completely preventing mis-
insertion.
In addition, the SMT-compatible headers are reinforced to prevent
separation of the solder connection.
See Fig. 1.
■ Application
Notebook computers, portable information terminals, compact
OA equipment, and various consumer equipment such as video movies.
Fig. 1
44
NC Nylon Connectors
DF13 Series (1.25mm Pitch)
■ Product standard
Rated current
Rating
1 A
Operating temp.
-35~85˚C(Note 1)
40~80%
Storage temp.
Storage humidity
-10~60˚C (Note 2)
40~70% (Note 2)
Rated voltage AC 150 V Operating humidity
Item
Standard
500 MΩ or more
Conditions
1. Insulation resistance
2. Withstand voltage
3. Contact resistance
Measured at 100 VDC
AC500V 1 minute
Measured at 100 mA
No flashover or dielectric breakdown allowed
30 mΩ or less
4. Insertion and withdrawals force MIN 0.3 N(30gf), MAX 3 N(300gf)
To be measured with a steel pin of M0.35±0.002mm
5. Vibration resistance
6. Moisture resistance
7.Temperature cycle
No electrical discontinuity of 1 µs or more allowed
Frequency: 10 - 55 Hz, single-side amplitude: 0.75 mm, 3 directions for 2 hours
Contact resistance: 30 mΩ or less, insulation resistance: 500 MΩ or more Temperature: 40±2°C, humidity: 90 - 95%, allow 96 hours before measurement .
Contact resistance: 30 mΩ or less, insulation resistance: 500 MΩ or more (-55°C for 30 min. / 5 - 35°C for 10 min. / 85°C for 30 min. / 5 - 35°C for 10 min.) 5 cycles
8. Insertion/extraction life
9. Solder heat resistance
Contact resistance: 30 mΩ or less
Solder-plated: 30 insertions/extractions
:
Gold-plated 50 insertions/extractions
No melting of resin affecting the connector performance allowed
Dip type
Flow: 250°C for 10 min.
Manual soldering: solder temperature:
300°C for 3 seconds
SMT type
Reflow: At recommended Manual soldering: solder temperature:
temperature profile
300°C for 3 seconds
Note 1:
Note 2:
Includes temperature rise when power is on.
"Storage" refers to a long period of storage without use of the product before being mounted on a board.
The operating temperature and humidity ranges apply to the connectors mounted on a board when turned off, and connectors under
temporary storage such as those being transported.
Note 3:
The above standards are typical for the DF13 series. The formal standards are stated in the delivery specifications.
■ Material
Product
Crimp socket
Crimp socket terminal Terminal
Pin header
Part
Insulation
Material
Polyamide resin
Phosphor bronze
Polyamide resin
Brass
Polyamide resin
Brass
Phosphor bronze
Polyamide resin
Brass
Processing
UL Rating
UL94V-0
Beige
Solder-plated or Gold-plated
Beige
Solder-plated
Insulation
Terminal
Insulation
Terminal
Fittings
Insulation
Terminal
Fittings
UL94V-0
UL94V-0
(Dip)
Beige
Pin header
(SMTsingle-row)
Solder-plated or Gold-plated
Solder-plated
Beige
UL94V-0
Pin header
(SMTdouble-row)
Solder-plated or Gold-plated
Solder-plated
Phosphor bronze
Note: Our tin plating is protected from whiskers.
■ Structure of the product number
The product specifications can be determined from the product number.
When ordering, select products using the product numbers listed in this catalog 46 to 52 pages.
● Connector
DF13#
- ✻ S -1.25C
➁ ➂ ➃ ➄
➅
➆
➀
➀
➁
➂
Series Name : DF
Series No. : 13
Shape symbol
➃
➅
➆
No. of contacts: Single row: : 2~12, 14, 15
Double-row: : 10, 20, 30, 40
Types of connectors
Contact pitch: 1.25 mm
Connection form/Type of termination
C: Crimp case
➄
Blank: With guide post
S: Single-row socket
DSA: Straight DIP
A: Without guide post
P: Single-row pin header
DS: Double-row socket
DS: Right-angle DIP
V: Straight SMT
For V type only
B: With guide post,embossed type packing
C: Without guide post, embossed type
packing
DP: Double-row pin header
H: Right-angle SMT
● Terminal
DF13 - 2630SCFA
➀
➂
➁
➀
➁
➂
Applicable wire size
2630 : AWG26~30
Type of plating
Blank: Tin-plated
A: Gold-plated
Type of form/Type of packaging
•
SCF : Socket contact reel
45
NC Nylon Connectors
DF13 Series (1.25mm Pitch)
■ Single-row socket
[Specification No.]: -**,(**)
Blank : 100 pcs. per pack
(40) : 500 pcs. per package
(41) : 1000 pcs. per package
Photo shows engaged pins
Unit : mm
No. of
No. of
Product No.
HRS No.
536-0001-4-
536-0002-7-
536-0003-0-
536-0004-2-
536-0005-5-
536-0006-8-
536-0007-0-
Product No.
A
B
HRS No.
536-0008-3-
536-0009-6-
536-0010-5-
536-0011-8-
536-0013-3-
536-0014-6-
A
B
contacts
contacts
DF13-2S-1.25C (
DF13-3S-1.25C (
DF13-4S-1.25C (
DF13-5S-1.25C (
DF13-6S-1.25C (
DF13-7S-1.25C (
DF13-8S-1.25C (
)
2
3
4
5
6
7
8
1.25 4.15
2.50 5.40
3.75 6.65
5.00 7.90
6.25 9.15
7.50 10.40
8.75 11.65
DF13- 9S-1.25C (
DF13-10S-1.25C (
DF13-11S-1.25C (
DF13-12S-1.25C (
DF13-14S-1.25C (
DF13-15S-1.25C (
)
9
10.00 12.90
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
)
✻✻
)
✻✻
10 11.25 14.15
11 12.50 15.40
12 13.75 16.65
14 16.25 19.15
15 17.50 20.40
)
✻✻
)
✻✻
)
✻✻
)
✻✻
)
✻✻
)
✻✻
)
✻✻
)
✻✻
)
✻✻
Note 1: Minimum order quantity of the models without a number specified is one pack containing 100 sockets.
Note 2: Models available in (40): 500 pieces per package and (41): 1000 pieces per pack should be ordered in quantity of sockets. Order in multiples
of order units, e.g., 500, 1000, 1500,-- .
■ Double-row socket
Photo shows engaged pins
Unit : mm
No. of
contacts
HRS No.
536-0550-2-
536-0555-6-
536-0560-6-
536-0565-0-
Product No.
A
B
[Specification No.]: -**,(**)
Blank : 100 pcs. per pack
(40) : 500 pcs. per package
(41) : 1000 pcs. per package
DF13-10DS-1.25C (✻✻) 10 10.40 5.00
DF13-20DS-1.25C (✻✻) 20 16.65 11.25
DF13-30DS-1.25C (✻✻) 30 22.90 17.50
DF13-40DS-1.25C (✻✻) 40 29.15 23.75
✻✻
✻✻
✻✻
✻✻
Note 1: Minimum order quantity of the models without a number specified is one pack containing 100 sockets.
Note 2: Models available in (40): 500 pieces per package and (41): 1000 pieces per pack should be ordered in quantity of sockets. Order in multiples
of order units, e.g., 500, 1000, 1500,-- .
46
NC Nylon Connectors
DF13 Series (1.25mm Pitch)
■ Single-row Straight Pin Header (DIP)
[Specification No.]: -**,(**)
Blank : Tin-plated
●Board through-hole diameter : ø0.6±0.03
Unit : mm
No. of
No. of
HRS No.
536-0101-9-
536-0102-1-
536-0103-4-
536-0104-7-
536-0105-0-
536-0106-2-
536-0107-5-
Product No.
A
B
HRS No.
Product No.
DF13- 9P-1.25DSA (✻✻)
A
B
contacts
contacts
DF13-2P-1.25DSA (✻✻)
DF13-3P-1.25DSA (✻✻)
DF13-4P-1.25DSA (✻✻)
DF13-5P-1.25DSA (✻✻)
DF13-6P-1.25DSA (✻✻)
DF13-7P-1.25DSA (✻✻)
DF13-8P-1.25DSA (✻✻)
2
1.25 4.15 536-0108-8-
2.50 5.40 536-0109-0-
3.75 6.65 536-0110-0-
5.00 7.90 536-0111-2-
6.25 9.15 536-0113-8-
7.50 10.40 536-0114-0-
8.75 11.65
9
10.00 12.90
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
3
4
5
6
7
8
DF13-10P-1.25DSA (✻✻) 10 11.25 14.15
DF13-11P-1.25DSA (✻✻) 11 12.50 15.40
DF13-12P-1.25DSA (✻✻) 12 13.75 16.65
DF13-14P-1.25DSA (✻✻) 14 16.25 19.15
DF13-15P-1.25DSA (✻✻) 15 17.50 20.40
Note : Minimum order quantity of the models without a number specified is one pack containing 100 sockets.
■ Single-row Right-angle Pin Header (DIP)
[Specification No.]: -**,(**)
(20):Tin-plated, magazine packaging
❖ Magazine dimension
●Board through-hole diameter : ø0.6±0.03
Unit : mm
No. of products
in a magazine
No. of products
No. of
No. of
contacts
HRS No.
Product No.
A
B
HRS No.
Product No.
A
B
contacts
in a magazine
536-0151-7-
536-0152-0-
536-0153-2-
536-0154-5-
536-0155-8-
536-0156-0-
536-0157-3-
DF13-2P-1.25DS (✻✻)
DF13-3P-1.25DS (✻✻)
DF13-4P-1.25DS (✻✻)
DF13-5P-1.25DS (✻✻)
DF13-6P-1.25DS (✻✻)
DF13-7P-1.25DS (✻✻)
DF13-8P-1.25DS (✻✻)
2
3
4
5
6
7
8
1.25 4.15 115
2.50 5.40 89
3.75 6.65 72
5.00 7.90 61
6.25 9.15 52
7.50 10.40 46
8.75 11.65 41
536-0158-6-
536-0159-9-
536-0160-8-
536-0161-0-
536-0163-6-
536-0164-9-
DF13- 9P-1.25DS (✻✻)
9 10.00 12.90 37
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
DF13-10P-1.25DS (✻✻) 10 11.25 14.15 34
DF13-11P-1.25DS (✻✻) 11 12.50 15.40 31
DF13-12P-1.25DS (✻✻) 12 13.75 16.65 29
DF13-14P-1.25DS (✻✻) 14 16.25 19.15 25
DF13-15P-1.25DS (✻✻) 15 17.50 20.40 23
Note: Order magazine-packaged products in multiples of the amount contained in a magazine.
47
NC Nylon Connectors
DF13 Series (1.25mm Pitch)
■ Single-row Straight Pin Header (SMT)
[Specification No.]: -**,(**)
(20) : Tin-plated, magazine packaging
(50) : Gold-plated, magazine packaging
Having a box type housing, the pin headers of this model have no embossed suction surface
and are not available in the embossed packaging specification.
Unit : mm
No. of products
No. of
HRS No.
Product No.
A
B
C
D
E
F
Remarks
contacts
in a magazine
67
57
49
44
39
36
33
30
28
26
24
21
536-0201-3-
536-0202-6-
536-0203-9-
536-0204-1-
536-0205-4-
536-0206-7-
536-0207-0-
536-0208-2-
536-0209-5-
536-0210-4-
536-0211-7-
536-0213-2-
536-0214-5-
DF13- 2P-1.25V (✻✻)
DF13- 3P-1.25V (✻✻)
DF13- 4P-1.25V (✻✻)
DF13- 5P-1.25V (✻✻)
DF13- 6P-1.25V (✻✻)
DF13- 7P-1.25V (✻✻)
DF13- 8P-1.25V (✻✻)
DF13- 9P-1.25V (✻✻)
2
3
4
5
6
7
8
9
1.25
2.50
3.75
5.00
6.25
4.15
5.40
6.65
7.90
9.15
10.40
11.65
12.90
14.15
15.40
16.65
19.15
20.40
7.15
8.40
9.65
3.35
4.60
5.85
7.10
8.35
5.65
6.90
8.15
1.95
3.20
4.45
5.70
6.95
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
10.90
12.15
13.40
14.65
15.90
17.15
18.40
19.65
22.15
23.40
9.40
10.65
11.90
13.15
14.40
15.65
16.90
18.15
20.65
21.90
Guide post:
Provided
7.50
8.75
9.60
8.20
9.45
10.85
12.10
13.35
14.60
15.85
18.35
19.60
10.00
11.25
12.50
13.75
16.25
17.50
10.70
11.95
13.20
14.45
16.95
18.20
DF13-10P-1.25V (✻✻) 10
DF13-11P-1.25V (✻✻) 11
DF13-12P-1.25V (✻✻) 12
DF13-14P-1.25V (✻✻) 14
DF13-15P-1.25V (✻✻) 15
20
Note: Order magazine-packaged products in multiples of the amount contained in a magazine.
❖ Recommended board pattern
❖
Magazine dimensional drawing
Note: When a part marked with
has a pattern and no resist on it, take care to prevent the connector terminal from contacting it.
48
NC Nylon Connectors
DF13 Series (1.25mm Pitch)
■ Single-row Straight Header (SMT)
(Three-wall type compatible with emboss suction)
❖ Recommended board pattern
Note 1: The hole is not required for products
without the guide.
Note 2: When a part marked with
has a
pattern and no resist on it, take care to
prevent the connector terminal from
contacting it.
[Specification No.]: -**,(**)
(20) : Tin-plated, magazine packaging
(21) : Tin-plated, embossed packaging
(50) : Gold-plated, magazine packaging
(51) : Gold-plated, embossed packaging
The pin headers of this model are three-wall type and have an embossed suction surface,
and are thus compatible with suction-operated automatic packaging.
Unit : mm
No. of products Emboss
No. of
contacts
HRS No.
Product No.
A
B
C
D
E
F
G
Remarks
in a magazine
Width
16
16
24
24
24
24
24
24
24
32
32
32
44
536-0051-2-
536-0052-5-
536-0053-8-
536-0054-0-
536-0055-3-
536-0056-6-
536-0057-9-
536-0058-1-
536-0059-4-
536-0060-3-
536-0061-6-
536-0063-1-
536-0064-4-
DF13B- 2P-1.25V (✻✻)
DF13B- 3P-1.25V (✻✻)
DF13B- 4P-1.25V (✻✻)
DF13B- 5P-1.25V (✻✻)
DF13B- 6P-1.25V (✻✻)
DF13B- 7P-1.25V (✻✻)
DF13B- 8P-1.25V (✻✻)
DF13B- 9P-1.25V (✻✻)
DF13B-10P-1.25V (✻✻) 10 11.25 14.15 17.15 13.35 15.65 11.95 10.60 28
DF13B-11P-1.25V (✻✻) 11 12.50 15.40 18.40 14.60 16.90 13.20 11.85 26
DF13B-12P-1.25V (✻✻) 12 13.75 16.65 19.65 15.85 18.15 14.45 13.10 24
DF13B-14P-1.25V (✻✻) 14 16.25 19.15 22.15 18.35 20.65 16.95 15.60 21
DF13B-15P-1.25V (✻✻) 15 17.50 20.40 23.40 19.60 21.90 18.20 16.85 20
2
3
4
5
6
7
8
9
1.25 4.15 7.15 3.35 5.65 1.95 2.20 67
2.50 5.40 8.40 4.60 6.90 3.20 3.45 57
3.75 6.65 9.65 5.85 8.15 4.45 3.10 49
5.00 7.90 10.90 7.10 9.40 5.70 4.35 44
6.25 9.15 12.15 8.35 10.65 6.95 5.60 39
7.50 10.40 13.40 9.60 11.90 8.20 6.85 36
8.75 11.65 14.65 10.85 13.15 9.45 8.10 33
10.00 12.90 15.90 12.10 14.40 10.70 9.35 30
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
Guide post:
Provided
536-0401-2-
536-0402-5-
536-0403-8-
536-0404-0-
536-0405-3-
536-0406-6-
536-0407-9-
536-0408-1-
536-0409-4-
536-0410-3-
536-0411-6-
536-0413-1-
536-0414-4-
DF13C- 2P-1.25V (✻✻)
DF13C- 3P-1.25V (✻✻)
DF13C- 4P-1.25V (✻✻)
DF13C- 5P-1.25V (✻✻)
DF13C- 6P-1.25V (✻✻)
DF13C- 7P-1.25V (✻✻)
DF13C- 8P-1.25V (✻✻)
DF13C- 9P-1.25V (✻✻)
DF13C-10P-1.25V (✻✻) 10 11.25 14.15 17.15
DF13C-11P-1.25V (✻✻) 11 12.50 15.40 18.40
DF13C-12P-1.25V (✻✻) 12 13.75 16.65 19.65
DF13C-14P-1.25V (✻✻) 14 16.25 19.15 22.15
DF13C-15P-1.25V (✻✻) 15 17.50 20.40 23.40
2
3
4
5
6
7
8
9
1.25 4.15 7.15
2.50 5.40 8.40
3.75 6.65 9.65
5.00 7.90 10.90
6.25 9.15 12.15
7.50 10.40 13.40
8.75 11.65 14.65
10.00 12.90 15.90
.
.
.
.
.
.
.
.
.
.
.
.
.
5.65 1.95 2.20 67
6.90 3.20 3.45 57
8.15 4.45 3.10 49
9.40 5.70 4.35 44
10.65 6.95 5.60 39
11.90 8.20 6.85 36
13.15 9.45 8.10 33
14.40 10.70 9.35 30
15.65 11.95 10.60 28
16.90 13.20 11.85 26
18.15 14.45 13.10 24
20.65 16.95 15.60 21
21.90 18.20 16.85 20
16
16
24
24
24
24
24
24
24
32
32
32
44
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
Guide post:
Not Provided
Note 1: Order magazine packaged products in multiples of the number in one magazine.
Note 2: Order embossed packaged product in reels (1,000 pcs. per reel).
49
NC Nylon Connectors
DF13 Series (1.25mm Pitch)
■ Single-row Right-angle Pin Header (SMT)
(Four-wall type compatible with emboss suction)
❖ Recommended board pattern
❖ Magazine dimensional
drawing
[Specification No.]: -**,(**)
(20) : Tin-plated,magazine packaging
(21) : Tin-plated, embossed packaging
(50) : Gold-plated, magazine packaging
(51) : Gold-plated, embossed packaging
Unit : mm
No. of products Emboss
No. of
contacts
HRS No.
Product No.
A
B
C
D
E
Remarks
in a magazine
Width
16
16
24
24
24
24
24
24
24
32
32
32
44
536-0251-1-
536-0252-4-
536-0253-7-
536-0254-0-
536-0255-2-
536-0256-5-
536-0257-8-
536-0258-0-
536-0259-3-
536-0260-2-
536-0261-5-
536-0263-0-
536-0264-3-
DF13 - 2P-1.25H (✻✻)
DF13 - 3P-1.25H (✻✻)
DF13 - 4P-1.25H (✻✻)
DF13 - 5P-1.25H (✻✻)
DF13 - 6P-1.25H (✻✻)
DF13 - 7P-1.25H (✻✻)
DF13 - 8P-1.25H (✻✻)
DF13 - 9P-1.25H (✻✻)
DF13 -10P-1.25H (✻✻) 10 11.25 14.15 17.15 13.35 15.65 28
DF13 -11P-1.25H (✻✻) 11 12.50 15.40 18.40 14.60 16.90 26
DF13 -12P-1.25H (✻✻) 12 13.75 16.65 19.65 15.85 18.15 24
DF13 -14P-1.25H (✻✻) 14 16.25 19.15 22.15 18.35 20.65 21
DF13 -15P-1.25H (✻✻) 15 17.50 20.40 23.40 19.60 21.90 20
2
3
4
5
6
7
8
9
1.25 4.15 7.15 3.35 5.65 67
2.50 5.40 8.40 4.60 6.90 57
3.75 6.65 9.65 5.85 8.15 49
5.00 7.90 10.90 7.10 9.40 44
6.25 9.15 12.15 8.35 10.65 39
7.50 10.40 13.40 9.60 11.90 36
8.75 11.65 14.65 10.85 13.15 33
10.00 12.90 15.90 12.10 14.40 30
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
Guide post:
Provided
536-0301-8-
536-0302-0-
536-0303-3-
536-0304-6-
536-0305-9-
536-0306-1-
536-0307-4-
536-0308-7-
536-0309-0-
536-0310-9-
536-0311-1-
536-0313-7-
536-0314-0-
DF13A- 2P-1.25H (✻✻)
DF13A- 3P-1.25H (✻✻)
DF13A- 4P-1.25H (✻✻)
DF13A- 5P-1.25H (✻✻)
DF13A- 6P-1.25H (✻✻)
DF13A- 7P-1.25H (✻✻)
DF13A- 8P-1.25H (✻✻)
DF13A- 9P-1.25H (✻✻)
DF13A-10P-1.25H (✻✻) 10 11.25 14.15 17.15
DF13A-11P-1.25H (✻✻) 11 12.50 15.40 18.40
DF13A-12P-1.25H (✻✻) 12 13.75 16.65 19.65
DF13A-14P-1.25H (✻✻) 14 16.25 19.15 22.15
DF13A-15P-1.25H (✻✻) 15 17.50 20.40 23.40
2
3
4
5
6
7
8
9
1.25 4.15 7.15
2.50 5.40 8.40
3.75 6.65 9.65
5.00 7.90 10.90
6.25 9.15 12.15
7.50 10.40 13.40
8.75 11.65 14.65
10.00 12.90 15.90
.
.
.
.
.
.
.
.
.
.
.
.
.
5.65 67
6.90 57
8.15 49
9.40 44
10.65 39
11.90 36
13.15 33
14.40 30
15.65 28
16.90 26
18.15 24
20.65 21
21.90 20
16
16
24
24
24
24
24
24
24
32
32
32
44
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
Guide post:
Not Provided
Note 1: Order magazine packaged products in multiples of the number in one magazine.
Note 2: Order embossed packaged product in reels (1,000 pcs. per reel).
50
NC Nylon Connectors
DF13 Series (1.25mm Pitch)
■ Double-row Right-angle Pin Header (SMT)
(Four-wall type compatible with emboss suction)
❖ Recommended board pattern
❖
Magazine dimensional drawing
Note 1: When a part marked with
has a pattern and no resist on it,
take care to prevent the
connector terminal from
contacting it.
Note 2: The hole is not required
for products without
the guide.
[Specification No.]: -**,(**)
(20) : Tin-plated, magazine packaging
(29) : Tin-plated, embossed packaging
(50) : Gold-plated, magazine packaging
(59) : Gold-plated, embossed packaging
Unit : mm
Remarks
Spec. Spec. Spec. Spec.No. of products Emboss
No. of
HRS No.
Product No.
A
B
C
D
contacts
(20) (29) (50) (59) in a magazine
Width
24
536-0510-8-
536-0515-1-
536-0520-1-
536-0525-5-
536-0600-9-
536-0605-2-
536-0610-2-
536-0615-6-
DF13 -10DP-1.25V (✻✻) 10 12.10 5.00 8.70 7.50
DF13 -20DP-1.25V (✻✻) 20 18.35 11.25 14.95 13.75
DF13 -30DP-1.25V (✻✻) 30 24.60 17.50 21.20 20.00
DF13 -40DP-1.25V (✻✻) 40 30.85 23.75 27.45 26.25
K
K
.
.
K
K
.
.
K
K
.
.
K
K
.
.
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
40
26
19
15
40
26
19
15
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
32
Guide post:
Provided
44
44
DF13A-10DP-1.25V (✻✻) 10 12.10 5.00 8.70
DF13A-20DP-1.25V (✻✻) 20 18.35 11.25 14.95
DF13A-30DP-1.25V (✻✻) 30 24.60 17.50 21.20
DF13A-40DP-1.25V (✻✻) 40 30.85 23.75 27.45
.
.
.
.
24
Guide post:
Not Provided
32
44
44
Note 1: Order magazine packaged products in multiples of the number in one magazine.
Note 2: Order embossed packaged product in reels (1,000 pcs. per reel).
Note 3: Embossed tape packaged products will be provided with suction area.
51
NC Nylon Connectors
DF13 Series (1.25mm Pitch)
■ Crimp terminal
HRS No.
536-0300-5
536-0298-5
Product No.
Type
Quantity
Processing
DF13-2630SCF
Reel terminal 10,000 units per reel Tin-plated
DF13-2630SCFA Reel terminal 10,000 units per reel Gold-plated
●Applicable wire (Tin-plated annealed copper wire)
● Recommended wire
UL1571
Conductor size (core construction) Coating diameter
AWG26 (7 cores/0.16 mm)
● Strip length
1.2~1.9mm
AWG28 (7 cores/0.127 mm) ø0.65~ø1.0mm
AWG30 (7 cores/0.1 mm)
Note: Contact our sales department for unspecified wires.
❖ Applicable crimping tool
Type
Applicator
Press body
HRS No.
901-4531-9
901-0005-4
Product No.
AP105-DF13-2630S
CM-105
Applicable contact
DF13-2630SCF/SCFA
...........
DF13-2630SCF
Manual crimping tool 550-0256-1
Extraction tool 550-0179-2
DF13-TB2630HC
DF-C-PO (B)
DF13-2630SCF
Note 1: Any problem caused by using a tool not approved by HIROSE is out of warranty.
Note 2: The manual crimping tool consecutively cuts carrier-fitted reel terminals.
❖ Application drawing
SMT (single row)
DIP (single row)
SMT (double rows)
SMT type right-angle model
(double-row) is not available.
52
NC Nylon Connectors
DF13 Series (1.25mm Pitch)
❖ Embossed tape carrier dimensional drawing (complies with JIS-C-0806)
● DF1 3 B-✻P-1 .2 5 V (Guide pos t: Provided)
● DF1 3 C-✻P-1 .2 5 V (Guide pos t: Not Provided)
● DF1 3 -✻P-1 .2 5 H (Guide pos t: Provided)
● DF1 3 A-✻P-1 .2 5 H (Guide pos t: Not Provided)
Unit : mm
Product type
Dimension
No. of contact
2, 3
A
B
C
D
DF13B- P-1.25V
16
24
32
44
.......
.......
28.4
7.5
16.4
24.4
32.4
44.4
✻
DF13C- P-1.25V
4~10
11.5
14.2
20.2
✻
DF13 - P-1.25H
11~14
15
✻
DF13A- P-1.25H
40.4
✻
Note: 13-pin models are not available in series.
53
NC Nylon Connectors
DF13 Series (1.25mm Pitch)
❖ Notes on use
1. Recommended temperature
profile (SMT)
Note 1: You can solder a product up to two times under the same conditions, provided that
the product is allowed to cool back to room temperature before the second soldering.
Note 2: The above temperature refers to the board surface temperature of the connector lead.
2. Recommended soldering
conditions (SMT)
Soldering iron temperature: 290±10˚C, soldering time: less than 3 seconds
3. Recommended screen
thickness (SMT)
0.15mm~0.2mm
4. Warp in board (SMT)
5. Recommended soldering
condition (DIP)
0.03 mm or less at the center of the connector with the connector ends as the reference.
■ Reflow conditions by automatic soldering machine: Soldering temperature: 250± 5˚C,
for 3 seconds or less.
■ Manual soldering conditions : Soldering iron temperature: 290±10˚C,
soldering time: 2 second or less.
6. Cleaning conditions
See "GUIDE TO HIROSE NYLON CONNECTORS."
7. Connecting conditions
See "GUIDE TO HIROSE NYLON CONNECTORS."
■ Because the crimp terminals are very small, use utmost care when crimping them in
accordance with the"Crimping conditions list" and "Crimping quality standards."
■ When inserting or extracting the connectors, do not pry them forcibly, to prevent them from
beging damaged.
8. PRECAUTIONS
54
相关型号：
DF13-13P-1.25DSA(20)
Board Connector, 13 Contact(s), 1 Row(s), Male, Straight, 0.049 inch Pitch, Solder Terminal, Locking, Receptacle, ROHS COMPLIANT
HRS
©2020 ICPDF网 联系我们和版权申明