HFD42/6-L13SR [HONGFA]
SUBMINIATURE SIGNAL RELAY;
| 型号： | HFD42/6-L13SR |
| 厂家： | 
HONGFA TECHNOLOGY |
| 描述： | SUBMINIATURE SIGNAL RELAY |
| 文件： | 总5页 (文件大小：865K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SUBMINIATURE SIGNAL RELAY
HFD42
Features
● Offers excellent board space savings
● Surge withstand voltage up to 2500V,
meets FCC Part 68 and Telecordia
● Meets EN60950/EN41003
● SMT and DIP types available
● High load capacity 2A
File No.:E133481
● Low power consumption
● Single side stable and latching type available
File No.:R50317623
RoHS compliant
CHARACTERISTICS
CONTACT DATA
2C
Insulation resistance
1000M (at 500VDC)
1500VAC 1min
750VAC 1min
Contact arrangement
Contact resistance
Contact material
Between coil & contacts
100m max. (at 10mA 30mVDC)
Dielectric
strength
AgNi + Au plated
Between open contacts
Between contact sets
1A 30VDC
0.5A 125VAC
2A 30VDC
1800VAC 1min
Contact rating
(Res. load)
Surge withstand voltage
Between open contacts (10/160µs)
Between coil & contacts (2/10µs)
1500V(FCC part 68)
2500V (Telecordia)
1A 125VAC
Max. switching current
Max. switching voltage
Max. switching power
Min. applicable load
Mechanical endurance
4A
250VAC / 220VDC
125VA / 120W
10mV 10µA
Operate time (Set time)
Release time (Reset time)
Ambient temperature
Humidity
3ms max.
3ms max.
-40 to 85
1 x 108OPS
5% to 85% RH
10Hz to 55Hz 3.3mm DA
10Hz to 55Hz 5.0mm DA
735m/s2
1 x 105OPS( 1A 30VDC,
Resistive load, at 85oC, 1s on 9s off)
1 x 105OPS( 0.5A 125VAC,
Functional
Destructive
Functional
Destructive
Vibration
resistance
Electrical endurance
Resistive load, at 85oC, 1s on 9s off)
Shock
resistance
980m/s2
Termination
Unit weight
DIP, SMT
COIL
Approx. 1.1g
Single side stable: 140mW、230mW
1 coil latching: 100mW、120mW
Moisture sensitivity levels (Only for
SMT type, JEDEC-STD-020)
Construction
Coil power
MSL3
Plastic sealed
SAFETY APPROVAL RATINGS
Notes: 1) The data shown above are initial values.
1A 30VDC 85
0.5A 125VAC 85
2A 30VDC 85
1A 125VAC 85
0.5A 125VAC 85
1A 30VDC 85
2A 30VDC 85
1A 125VAC 85
UL/CUL
TÜV
Notes: 1) All values unspecified are at room temperature.
2) Only typical loads are listed above. Other load specifications
can be available upon request.
HONGFA RELAY
ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED
2019 Rev. 1.00
95
COIL DATA
at 23
Single side stable
Pick-up
Voltage
VDC
Drop-out
Voltage
VDC
Coil
Resistance
Nominal
Voltage
VDC
Max.
Voltage
VDC
Coil
Code
max.
min.
HFD42/1.5
1.5
2.4
3
1.13
1.8
0.15
0.24
0.3
16 x (1 10%)
41 x (1 10%)
2.2
3.6
HFD42/2.4
HFD42/3
HFD42/4.5
HFD42/5
HFD42/6
HFD42/9
HFD42/12
HFD42/24
2.25
3.38
3.75
4.5
64.3 x (1 10%)
145 x (1 10%)
178 x (1 10%)
257 x (1 10%)
579 x (1 10%)
1028 x (1 10%)
2504 x (1 10%)
4.5
4.5
5
0.45
0.5
6.7
7.5
6
0.6
9.0
9
6.75
9
0.9
13.5
18.0
36.0
12
24
1.2
18
2.4
Notes: 1) Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time.
1 coil latching
Set
Voltage
VDC
Reset
Voltage
VDC
Coil
Resistance
Nominal
Voltage
VDC
Max.
Voltage
VDC
Coil
Code
max.
max.
1.5
2.4
3
1.13
1.8
1.13
1.8
22.5 x (1 10%)
58 x (1 10%)
3.0
4.8
HFD42/1.5-L
HFD42/2.4-L
HFD42/3-L
HFD42/4.5-L
HFD42/5-L
HFD42/6-L
HFD42/9-L
HFD42/12-L
HFD42/24-L
2.25
3.38
3.75
4.5
2.25
3.38
3.75
4.5
90 x (1 10%)
6.0
4.5
5
203 x (1 10%)
250 x (1 10%)
360 x (1 10%)
810 x (1 10%)
1440 x (1 10%)
2880 x (1 10%)
9.0
10.0
12.0
18.0
24.0
36.0
6
9
6.75
9
6.75
9
12
24
18
18
Notes: 1) When user's requirements can't be found in the above table,special order allowed.
2) In case 5V of transistor drive circuit, it is recommended to use 4.5V type relay, and 3V to use 2.4V type relay.
ORDERING INFORMATION
S
(XXX)
3
HFD42 / 24
-L1
R
Type
Coil voltage
Sort
1.5, 2.4, 3, 4.5, 6, 9, 12, 24VDC
L1: 1 coil latching
Nil: Single side stable
Contact material 3: AgNi+Gold plated
Terminal type
Packing style
S: Standard SMT
R: Tape and reel packing (Only for SMT type)1)
S1: Short terminal SMT
Nil: DIP
Nil: Tube packing(Only for DIP type)
Special code2)
XXX: Customer special requirement
Nil: Standard
Notes: 1) R type (tape and reel) packing is moisture-proof which meets requirement of MSL-3. Please choose R type packing for SMT products.
For R type, the letter "R" will only be printed on packing tag but not on relay cover. Tube packing is normally not available for SMT
products unless specially requested by customer. But please note that tube packing is not moisture-proof so please bake the products
before use according to description of Notice 10 herewith. In addition, tube packaging will be adopted when the ordering quantity of R
type is equal to or less than 100 pieces unless otherwise specified.
2) The customer special requirement express as special code after evaluating by Hongfa.
96
OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT
Unit: mm
Outline Dimensions
PCB Layout
(Bottom view)
10.6
5.7
2.2 2.2
3.2
DIP type
8-Ø0.85
1.5
10.6
5.7
3.2
2.2 2.2
Standard
SMT type
0.8
1.5
7.4
5.7
10.6
3.2
2.2 2.2
Short terminal
SMT type
0.8
5.7
1.5
Wiring Diagram
(Bottom view)
Single side stable
1 coil latching
1
2
3
4
1
2
3
4
5
8
7
6
5
8
7
6
Orientation mark
Orientation mark
No energized condition
Reset condition
Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm
and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm.
2) The tolerance without indicating for PCB layout is always ±0.1mm.
3) The width of the gridding is 2.5mm.
97
TAPE PACKING
Unit: mm
Direction of Relay Insertion
I
Reel
4:1
Orientation mark
Cover tape
Feed direction
Embossed
carrier tape
Notes: 1) Packing: 500pcs/reel, 4 reels/carton.
2) MOQ for reel packing is 500pcs.
I
adhesive tape
Cover tape
adhesive tape
Cover tape
Feed direction
during customer usage
at least 5 empty
relay positions
at least 5 empty
relay positions
Reel Dimensions
1
29.4
24.4
0.2
13
0.3
1.6
2
3-R1
21
0.5
Tape Dimensions
4
A-A
B-B
1.5
2
0.05
B
0.5
。
3
A
A
2
0.2
7.7
12
10.1
B
98
TAPE PACKING
Unit: mm
Tape Dimensions (S1 type: Short terminal SMT)
4
A-A
B-B
1.5
2
B
0.05
0.5
。
3
A
A
2
0.2
6
12
B
10.1
Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm
and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm.
2) The tolerance without indicating for PCB layout is always ±0.1mm.
3) The width of the gridding is 2.54mm.
CHARACTERISTIC CURVES
REFLOW WELDING,TEMPERATURE
MAXIMUM SWITCHING POWER
ENDURANCE CURVE
ON PCB BOARD
RECOMMENDED WELDING TEMPERATURE
1000V
Temperature
(
)
500
AC Resistive Load
125V
30VDC
Resistive Load
Soldering
100V
max.245
220
100
50
max. 3 /s
DC Resistive Load
30V
180
150
Preheating
max. 6 /s
10V
10
125VAC Resistive Load
Time(s)
max. 60
max. 100
10mV
1
max. 100
100mA
1A
10A
10uA
0
1
2
3
max. 280
Contact Current
Contact Current (A)
Test conditions:
Resistive load, at 40oC, 1s on 9s off.
Notice
1) This relay is highly sensitive polarized relay, if correct polarity is not applied to the coil terminals, the relay does not operate properly.
2) To avoid using relays under strong magnetic field which will change the parameters of relays such as pick-up voltage and drop-out voltage.
3) Relay is on the “reset” status when being released from stock, with the consideration of shock risen from transit and relay mounting, it should
be changed to the “set” status when application(connecting to the power supply). Please reset the relay to “set” or “reset” status on request.
4) Energizing coil with rated voltage is basic for normal operation of a relay, please make sure the energized voltage to relay coil have reached the
rated voltage. Regarding latching relay, in order to maintain the "set" or "reset" status, impulse width of the rated voltage applied to coil should
be more than 5 times of "set" or "reset" time.
5) The relay may be damaged because of falling or when shocking conditions exceed the requirement.
6) For SMT products, validation with real application should be done before your series production, if the reflow-soldering temperature curve is out
of our recommendation. Generally, two-time reflow-soldering is not recommended for the relay. However, if two-time reflow-soldering is required,
a 60-min. interval should be guaranteed and a validation should be done before production.
7) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB.
8) Regarding the plastic sealed relay, we should leave it cooling naturally untill below 40oC after welding, then clean it and deal with coating, remarkably
the temperature of solvents should also be controlled below 40oC.Please avoid cleaning the relay by ultrasonic, avoid using the solvents like
gasoline, Freon, and so on, which would affect the configuration of relay or influence the environment.
9) About preferable condition of operation, storage and transportation, please refer to "Explanation to terminology and guidetines of relay".
10) Relays packaged in moisture barrier bags meet MSL-3 requirements. The relays should be stored at ambient conditions of ≤30℃ and ≤60%
RH after they are removed from their packaging, and should be used within 168 hours. If the relays cannot be used within 168 hours, please
repack them or store them in a drying oven at 25℃±5℃, ≤10% RH. Otherwise, relays may be subjected to a soldering test to check their
performance, or they may be used after keeping them in an oven for 72 hours at with 50℃±5℃, ≤30% RH.
Disclaimer
The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice.
We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to
choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s
responsibility to determine which product should be used only.
© Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved.
99
相关型号：
©2020 ICPDF网 联系我们和版权申明