HFD4-V/12-LS1R [HONGFA]

SUBMINIATURE HIGH DIELECTRIC STRENGTH SIGNAL RELAY;


型号：	HFD4-V/12-LS1R
厂家：	HONGFA TECHNOLOGY
描述：	SUBMINIATURE HIGH DIELECTRIC STRENGTH SIGNAL RELAY
文件：	总5页 (文件大小：777K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SUBMINIATURE HIGH DIELECTRIC STRENGTH SIGNAL RELAY

HFD4-V

Features

● Subminiature high dielectric strength signal relay

● Surge withstand voltage up to 2500V

● Meets EN60950/EN41003

File No.:E133481

D E

● gap between open contacts ≥0.4mm

● Low power consumption

File No.:40048125

● Single side stable and latching type available

RoHS compliant

CHARACTERISTICS

CONTACT DATA

Insulation resistance

1000M (at 500VDC)

1200VAC 1min

1600VAC 1min

1800VAC 1min

Contact arrangement

Contact resistance

Contact material

Between open contacts

100m max. (at 10mA 30mVDC)

AgNi + Au plated

1A 30VDC

Dielectric

strength

Between coil & contacts

Between contact sets

Contact rating

(Res. load)

Surge withstand voltage

0.3A 125VAC

425VAC / 600VDC

Between open contacts (10/160µs)

Between coil & contacts (2/10µs)

1500V (FCC part 68)

2500V (Telecordia)

Max. switching voltage

Max. switching current

Max. switching power

Min. applicable load ¹⁾

Mechanical endurance

Operate time (Set time)

Release time (Reset time)

Ambient temperature

Humidity

3ms max.

62.5VA / 60W

10mV 10µA

1 x 10⁷OPS

-40 to 85

5% to 85% RH

735m/s²

1 x 10⁵OPS(1A 30VDC)

1 x 10⁵OPS(0.3A 125VAC)

1 x 10⁵OPS(10mA 600VDC,

2 sets of NO contacts in series)

Functional

Shock

resistance

Electrical endurance ²⁾

980m/s²

Destructive

10Hz to 55Hz 3.3mm DA

10Hz to 55Hz 5.0mm DA

DIP, SMT

Functional

Destructive

Notes: 1) Min. applicable load is reference value. Please perform the

confirmation test with the actual load before production since

reference value may change according to switching frequencies,

environmental conditions and expected contact resistance and

reliability.

Vibration resistance

Termination

Unit weight

Construction

2) Electric endurance data are collected in one pair of NO contacts

test.

Approx. 0.8g

Plastic sealed

Notes: 1) The data shown above are initial values.

2) UL insulation system: Class F

COIL

Single side stable

1 coil latching

See "COIL DATA"

Coil power

SAFETY APPROVAL RATINGS

Temperature rise

70K max.(At 1A load, 85 environment)

1A 30VDC at 85

0.3A 125VAC at 85

UL/CUL

AgNi + Au plated

1A 30VDC at 85

0.3A 125VAC at 85

AgNi + Au plated

VDE

Notes: 1) Only typical loads are listed above. Other load specifications

can be available upon request.

HONGFA RELAY

ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED

2020 Rev. 1.00

COIL DATA

at 23

Single side stable

Nominal

Power

Pick-up

Voltage

VDC

Drop-out

Voltage

VDC

Coil

Resistance

Nominal

Voltage

VDC

Max.

Voltage

VDC

Coil

Code

approx.

max.

min.

HFD4-V/1.5

HFD4-V/2.4

HFD4-V/3

HFD4-V/4.5

HFD4-V/5

HFD4-V/6

HFD4-V/9

HFD4-V/12

1.5

2.4

2.2

3.6

≤1.2

≤1.92

≤2.4

≤3.6

≤4

≥0.15

≥0.24

≥0.3

≥0.45

≥0.5

≥0.6

≥0.9

≥1.2

≥2.4

11.3 x (1 10%)

28.9 x (1 10%)

45 x (1 10%)

200

4.5

6.7

101.3 x (1 10%)

125 x (1 10%)

180 x (1 10%)

405 x (1 10%)

720 x (1 10%)

2880 x (1 10%)

7.5

9.0

≤4.8

≤7.2

≤9.6

≤19.2

13.5

18.0

36.0

HFD4-V/24

1 coil latching

Set

Voltage

VDC

Reset

Voltage

VDC

Nominal

Power

Coil

Resistance

Nominal

Voltage

VDC

Max.

Voltage

VDC

Coil

Code

max.

approx.

1.5

2.4

≤1.2

≤1.92

≤2.4

≤3.6

≤4

140

200

3.0

4.8

HFD4/1.5-L

HFD4/2.4-L

HFD4/3-L

HFD4/4.5-L

HFD4/5-L

HFD4/6-L

HFD4/9-L

HFD4/12-L

HFD4/24-L

≤1.2

≤1.92

≤2.4

≤3.6

≤4

16 x (1 10%)

41.1x (1 10%)

64.3 x (1 10%)

145 x (1 10%)

178 x (1 10%)

257 x (1 10%)

579 x (1 10%)

1028 x (1 10%)

2880 x (1 10%)

6.0

4.5

9.0

10.0

12.0

18.0

24.0

36.0

≤4.8

≤7.2

≤9.6

≤19.2

≤4.8

≤7.2

≤9.6

≤19.2

Notes: 1) Max voltage refers to the over voltage that the relay coil can withstand in a very short time.

2) When user's requirements can't be found in the above table,special order allowed.

3) In case 5V of transistor drive circuit, it is recommended to use 4.5V type relay, and 3V to use 2.4V type relay.

ORDERING INFORMATION

HFD4-V/

-L

(XXX)

Type

Coil voltage

Sort

1.5, 2.4, 3, 4.5, 5, 6, 9, 12, 24VDC

L: 1 coil latching

S: Standard SMT

Nil: Single side stable

Terminal type

S1: Short terminal SMT

Nil: DIP

R: Tape and reel packing (Only for SMT type) ⁽¹⁾

Nil: Tube packing(Only for DIP type)

Packing style

Special code ⁽²⁾

Notes: 1) R type (tape and reel) packing is moisture-proof which meets requirement of MSL-3. Please choose R type packing for SMT products.

For R type, the letter "R" will only be printed on packing tag but not on relay cover. Tube packing is normally not available for SMT

products unless specially requested by customer. But please note that tube packing is not moisture-proof so please bake the products

before use according to description of Notice 12 herewith. In addition, tube packaging will be adopted when the ordering quantity of R

type is equal to or less than 100 pieces unless otherwise specified.

2) The customer special requirement express as special code after evaluating by Hongfa.

3) For products that should meet the explosion-proof requirements of "IEC 60079 series",please note [Ex] after the specification while placing

orders.Not all products have explosion-proof certification,so please contact us if necessary, in order to select the suitable products.

OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT

Unit: mm

Outline Dimensions

PCB Layout

(Bottom view)

6.5

3.2 2.2 2.2

8xØ

0.85

DIP type

0.4

3.2

5.08

1.2

2.2 2.2

3.2 2.2 2.2

6.5

Standard

SMT type

0.8

5.08

7.5

0.4

3.2

2.2

1.2

3.2 2.2 2.2

6.5

Short terminal

SMT type

0.8

5.08

6.6

0.4

3.2

2.2

1.2

Wiring Diagram

(Bottom view)

Single side stable

1 coil latching

Orientation mark

No energized condition

Reset condition

Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm

and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm.

2) The tolerance without indicating for PCB layout is always ±0.1mm.

TAPE PACKING

Unit: mm

Direction of Relay Insertion

Reel

4:1

Orientation mark

Cover tape

Feed direction

Embossed

carrier tape

Notes: 1) Packing: 900pcs/reel, 4 reels/carton.

2) MOQ for reel packing is 900pcs.

adhesive tape

Cover tape

adhesive tape

Cover tape

Feed direction

during customer usage

at least 5 empty

relay positions

at least 5 empty

relay positions

Reel Dimensions

29.4

24.4

0.2

0.3

1.6

3-R1

0.5

Tape Dimensions (S type: Standard SMT)

A-A

B-B

1.5

0.05

0.5

。

0.2

8.1

TAPE PACKING

Unit: mm

Tape Dimensions (S1 type: Short terminal SMT)

A-A

B-B

1.5

0.05

0.5

。

0.2

Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm

and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm.

2) The tolerance without indicating for PCB layout is always ±0.1mm.

3) The width of the gridding is 2.54mm.

CHARACTERISTIC CURVES

REFLOW WELDING,TEMPERATURE

ENDURANCE CURVE

MAXIMUM SWITCHING POWER

ON PCB BOARD

RECOMMENDED WELDING TEMPERATURE

500

500V

Temperature

(

)

AC Resistive Load

30VDC

Resistive Load

100V

100

Soldering

max.245

220

DC Resistive Load

30V

max. 3 /s

180

150

Preheating

max. 6 /s

10V

125VAC

Time(s)

Resistive Load

max. 60

max. 100

1.2

10A

0.2

0.4

0.6

0.8

1.0

100mA

10uA

max. 280

Contact Current (A)

Contact Current

Test conditions:

Resistive load, at 85^oC, 1s on 9s off.

Notice

1) This relay is highly sensitive polarized relay, if correct polarity is not applied to the coil terminals, the relay does not operate properly.

2) To avoid using relays under strong magnetic field which will change the parameters of relays such as pick-up voltage and drop-out voltage.

3) Relay is on the “reset” status when being released from stock, with the consideration of shock risen from transit and relay mounting, it should

be changed to the “set” status when application(connecting to the power supply). Please reset the relay to “set” or “reset” status on request.

4) Energizing coil with rated voltage is basic for normal operation of a relay, please make sure the energized voltage to relay coil have reached the

rated voltage. Regarding latching relay, in order to maintain the "set" or "reset" status, impulse width of the rated voltage applied to coil should

be more than 5 times of "set" or "reset" time.

5) For mono-stable type,in case the holding volatage will be reduced after relay operates reliably,please ensure that the effective value of the holding

voltage is over 60% of rated voltage.

6) The relay may be damaged because of falling or when shocking conditions exceed the requirement.

7) For SMT products, validation with real application should be done before your series production, if the reflow-soldering temperature curve is out

of our recommendation. Generally, two-time reflow-soldering is not recommended for the relay. However, if two-time reflow-soldering is required,

a 60-min. interval should be guaranteed and a validation should be done before production.

8) For THT type,please adopt wave soldering or manual welding. If reflow soldering is needed,please contact us to further confirm the applicability.

9) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB.

10) Regarding the plastic sealed relay, we should leave it cooling naturally untill below 40^oC after welding, then clean it and deal with coating,

remarkably the temperature of solvents should also be controlled below 40^oC.Please avoid cleaning the relay by ultrasonic, avoid using the solvents

like zgasoline, Freon, and so on, which would affect the configuration of relay or influence the environment.

11) About preferable condition of operation, storage and transportation, please refer to "Explanation to terminology and guidetines of relay".

12) Relays packaged in moisture barrier bags meet MSL-3 requirements. The relays should be stored at ambient conditions of ≤30℃and ≤60%

RH after they are removed from their packaging, and should be used within 168 hours. If the relays cannot be used within 168 hours, please

repack them or store them in a drying oven at 25℃±5℃, ≤10% RH. Otherwise, relays may be subjected to a soldering test to check their

performance, or they may be used after keeping them in an oven for 72 hours at with 50℃±5℃, ≤30% RH.

Disclaimer

The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice.

We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to

choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s

responsibility to determine which product should be used only.

HFD4-V/12-LS1R [HONGFA]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E