VF401 [HONEYWELL]

2-Wire Solid State Switch; 2线固态开关
VF401
型号: VF401
厂家: Honeywell    Honeywell
描述:

2-Wire Solid State Switch
2线固态开关

开关 传感器 换能器 磁场传感器
文件: 总5页 (文件大小:616K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
VF401  
2-Wire Solid State Switch  
DESCRIPTION  
The VF401 allows a greater air gap between the target and the  
sensor with reduced loss in sensor signal or accuracy.  
The VF401 is a 2-wire MR (magnetoresistive) bridge array in a  
miniature plastic package, designed for sensing fine pitch ring  
magnets.  
Patent number 6,297,628.  
FEATURES  
POTENTIAL APPLICATIONS  
Wide operating temperature range  
2-wire operation means less wiring  
Enhanced sensitivity, ±7 gauss typical  
Output pattern independent of gap between target and  
sensor  
Speed encoding using a multipole ring magnet  
Enhanced accuracy cam and crank position sensing  
Wheel speed sensing  
Window lift applications  
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com  
VF401  
ABSOLUTE MAXIMUM RATINGS1  
Parameter  
Minimum  
Typical  
Maximum  
Unit  
Supply voltage2  
-18  
+18  
V
Magnetic flux gauss  
no limit  
175 [347] for  
10 min. at  
10 cycles  
3000  
°C [°F]  
Temperature  
Frequency  
Hz  
Notes:  
1. Absolute maximum ratings are the extreme limits the device will momentarily withstand without damage to the device. Electrical  
and magnetic characteristics are not guaranteed if the rated voltage and/or currents are exceeded nor will the device necessarily  
operate at absolute maximum ratings.  
2. Customer supplied sense resistor required for negative reverse voltage.  
PERFORMANCE SPECIFICATIONS (Established using a 65,00 mm [2.559 in] diameter, 48 pole pair ring magnet.)  
Parameter  
Vcc1  
Condition  
Minimum  
Typical  
Maximum  
Unit  
V
4.5  
11.8  
5.9  
1.9  
16  
Vh (V+ to V-)  
Icc operate  
Icc released  
Icc ratio (op/rel)  
V
14  
7
16.80  
8.40  
2.3  
mA  
mA  
2.0  
1.5  
Rise time at 25 °C [77 °F] Vcc = 12 V, RL: = 150 Ohm, CL = 1000 pf  
10% to 90%  
µs  
Fall time at 25 °C [77 °F]  
10% to 90%  
Vcc = 12 V, RL: = 150 Ohm, CL = 1000 pf  
1.5  
µs  
Operating temperature  
Differential magnetic field  
over entire MR bridge  
area  
-40 [-40]  
150 [302]  
°C [°F]  
gauss  
+7  
-7  
operate  
release  
Air gap2  
0.75  
30  
2.5  
70  
mm  
%
Duty cycle  
50  
Notes:  
1. Vcc is limited by Vh and the value chosen for the sense  
resistor.  
2. Sensor operation at limits for air gap is dependent on ring  
magnet.  
2
www.honeywell.com/sensing  
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com  
2-Wire Solid State Switch  
ELECTRICAL SPECIFICATION TEST CONDITION  
SENSOR OUTPUT  
BLOCK DIAGRAM  
MOUNTING DIMENSIONS (For reference only. mm/[in])  
Honeywell Sensing and Control  
3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com  
ORDER GUIDE  
Catalog Listing  
VF401  
Description  
2-wire solid state switch, standard bulk pack, 500 units per bag  
Note:  
Bulk packaging process may affect lead straightness on some units.  
WARNING  
MISUSE OF DOCUMENTATION  
WARNING  
PERSONAL INJURY  
The information presented in this product sheet is for  
reference only. Do not use this document as a product  
installation guide.  
DO NOT USE these products as safety or emergency stop  
devices or in any other application where failure of the  
product could result in personal injury.  
Complete installation, operation, and maintenance  
information is provided in the instructions supplied with  
each product.  
Failure to comply with these instructions could result  
in death or serious injury.  
Failure to comply with these instructions could result  
in death or serious injury.  
SALES AND SERVICE  
Honeywell serves its customers through a worldwide network  
of sales offices, representatives and distributors. For  
application assistance, current specifications, pricing or name  
of the nearest Authorized Distributor, contact your local sales  
office or:  
WARRANTY/REMEDY  
Honeywell warrants goods of its manufacture as being free of  
defective materials and faulty workmanship. Honeywell’s  
standard product warranty applies unless agreed to otherwise  
by Honeywell in writing; please refer to your order  
acknowledgement or consult your local sales office for specific  
warranty details. If warranted goods are returned to Honeywell  
during the period of coverage, Honeywell will repair or replace,  
at its option, without charge those items it finds defective. The  
foregoing is buyer’s sole remedy and is in lieu of all other  
warranties, expressed or implied, including those of  
merchantability and fitness for a particular purpose. In no  
event shall Honeywell be liable for consequential, special,  
or indirect damages.  
E-mail: info.sc@honeywell.com  
Internet: www.honeywell.com/sensing  
Phone and Fax:  
Asia Pacific  
+65 6355-2828  
+65 6445-3033 Fax  
+44 (0) 1698 481481  
+44 (0) 1698 481676 Fax  
+1-305-805-8188  
+1-305-883-8257 Fax  
+1-800-537-6945  
Europe  
Latin America  
USA/Canada  
While we provide application assistance personally, through  
our literature and the Honeywell web site, it is up to the  
customer to determine the suitability of the product in the  
application.  
+1-815-235-6847  
+1-815-235-6545 Fax  
Specifications may change without notice. The information we  
supply is believed to be accurate and reliable as of this  
printing. However, we assume no responsibility for its use.  
Automation and Control Solutions  
Sensing and Control  
Honeywell  
1985 Douglas Drive North  
005884-1-EN IL50 GLO Printed in USA  
April 2007  
© 2007 Honeywell International Inc. All rights reserved.  
Minneapolis, MN 55422  
www.honeywell.com/sensing  
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com  

相关型号:

VF40100C

Dual High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.38 V at IF = 5 A
VISHAY

VF40100C-E3/45

Rectifier Diode, Schottky, 20A, 100V V(RRM),
VISHAY

VF40100C-E3/4W

Dual High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.38 V at IF = 5 A
VISHAY

VF40100C-M3/4W

40A,100V,TRENCH SKY RECT.
VISHAY

VF40100C_15

Dual High-Voltage Trench MOS Barrier Schottky Rectifier
VISHAY

VF40100G

Dual High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.42 V at IF = 5 A
VISHAY

VF40100G-E3/4W

Dual High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.42 V at IF = 5 A
VISHAY

VF40100G-M3/4W

Rectifier Diode, Schottky, 1 Phase, 2 Element, 20A, 100V V(RRM), Silicon, TO-220AB, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, ITO-220AB, 3 PIN
VISHAY

VF40120C

Dual High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.43 V at IF = 5 A
VISHAY

VF40120C-E3/4W

Dual High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.43 V at IF = 5 A
VISHAY

VF40120C-M3-4W

Dual High-Voltage Trench MOS Barrier Schottky Rectifier
VISHAY

VF40120C_10

Dual High-Voltage Trench MOS Barrier Schottky Rectifier
VISHAY