SX15A [HONEYWELL]

CPX and XPX Cross to NSC Series;


型号：	SX15A
厂家：	Honeywell
描述：	CPX and XPX Cross to NSC Series 传感器换能器
文件：	总4页 (文件大小：95K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

S X S e r i e s

APPLICATIONS

Low Cost

Medical

Instrumentation

Pressure Sensors

Barometric

Measurement

Pneumatic Controls

Battery Powered

Equipment

FEATURES

Low Cost

High-Impedance Bridge

Absolute and

Differential (Gauge)

Low Noise

Low Power

Consumption for

Battery Power

The SX Series of pressure sensors provide the lowest cost

components for measuring pressures up to 150 psi.

These sensors were specifically designed for use with

non-corrosive, non-ionic media, such as air, dry gases,

and the like. Convenient pressure ranges are available to

measure differential, gauge, and absolute pressures from

0 to 1 psi (SX01) up to 0 to 150 psi (SX150).

EQUIVALENT

CIRCUITS

The Absolute (A) devices have an internal vacuum

reference and an output voltage proportional to absolute

pressure. The Differential (D) devices allow application

of pressure to either side of the diaphragm and can be

used for gauge or differential pressure measurements.

OUTPUT

GND

This product is packaged either in SenSym ICT’s standard

low cost chip carrier “button” package, a plastic ported

“N” package, or a metal TO5 Package with or without gel.

All packages are designed for applications where the

sensing element is to be integral to the OEM equipment.

These packages can be o-ring sealed, epoxied, and/or

clamped onto a pressure fitting. A closed-bridge four-

pin SIP configuration is provided for electrical connection

to the “Button” or “N” Package. The TO5 Package offers

a 5-pin open-bridge configuration. A DIP Package is also

available, which mounts on a PC board like a standard IC

with through-hole pins. This extremely small size

package enables the use of multiple sensors in a limited

available space application.

BUTTON, NIPPLE AND "N" PACKAGE

OUTPUT

GND

TO AND DIP PACKAGE

Because of its high-impedance bridge, the SX Series is

ideal for portable and low power or battery operated

systems. Due to its low noise, the SX is an excellent

choice for medical and other low pressure applications.

Contact your local SenSym ICT representative, the factory,

or go to Sensym ICT’s Web site at www.sensym-ict.com for

additional details.

S X S e r i e s

PRESSURE SENSOR CHARACTERISTICS

Maximum Ratings (For All Devices)

SPECIFICATION

NOTES ^{(for all devices)}

Note 1: Reference Conditions:

Supply Voltage, V

Temperature Ranges:

Operating

+12 Vdc

= 25°C

-40°C to +85°C

-55°C to +125°C

150 psig

Supply

= 5 Vdc

Storage

Common-Mode Pressure

Lead Soldering Temperature

(2-4 Seconds)

Common Line Pressure =

0 psig

250°C

Pressure Applied to P1

Note 2: Full-Scale Span is the

algebraic difference

PERFORMANCE CHARACTERISTICS⁽¹⁾

between the output

voltage at full-scale

pressure and the output at

zero pressure. Full-Scale

Span is ratiometric to the

supply voltage.

Characteristics

Min

Typ

Max

Unit

Zero Pressure Offset⁽⁵⁾

Temperature Coefficient of Offset^(6,9)

-35

–

-20

–

µV/V/°C

Note 3: Pressure Hysteresis - the

maximum output

Combined Pressure Non-Linearity and

Pressure Hysteresis⁽³⁾

–

0.2

0.1

0.5

%FSS

µsec

difference at any point

within the operating

pressure range for

increasing and decreasing

pressure.

Pressure Non-Linearity –

the maximum deviation of

measure output, at

constant temperature

(25°), from “best straight

line” through three points

(offset pressure, full-scale

pressure, one-half full-scale

pressure).

Long Term Stability of Offset & Span⁽⁸⁾

Response Time⁽⁷⁾

–

100

4.1

–

Input Resistance

kΩ

Temperature Coefficient of Resistance^(6,9)

Temperature Coefficient of Span^(6,9)

Output Resistance

+690

-2550

–

+750

-2150

4.1

+810

-1900

–

ppm/°C

kΩ

Repeatability⁽⁴⁾

–

0.5

–

%FSS

SX PERFORMANCE CHARACTERISTICS⁽¹⁾

Note 4: Maximum difference in

output at any pressure

within the operating

pressure range and the

temperature range within

0°C to +70°C after:

Operating

Pressure

(psi)

Part

Number

Sensitivity

(mV/V/psi)

Full-Scale Span⁽²⁾

(mV)

Burst Pressure

(psi)

a) 100 temperature cycles,

0°C to +70°C

b) 1 million pressure

cycles, 0 psi to

Typ

4.0

Min

Typ

Max

SX01

SX05

SX15

SX30

SX100

SX150

0-1

0-5

3.0

100

150

200

150

Full-Scale Span

0-15

0-30

0-100

0-150

1.5

110

150

110

Note 5: The zero pressure offset is

0 mV Min, 20 mV Typ and

35 mV Max for part

0.75

0.3

100

150

200

numbers SXxxxGD2 and

SXxxxDD4.

0.15

*Maximum Pressure above which can cause permanent sensor failure

Note 6: Slope of best straight line

fit from 0°C to 70°C. For

operation outside this

temperature range, contact

factory for more

ORDERING INFORMATION

To order, use the following part number(s):

Order Part Number

information.

Note 7: Response time for a 0 psi

to Full-Scale Span pressure

step change, 10% to 90%

rise time.

Button

Nipple

“N”

Pressure Range

0 to 1 psid or psig

0 to 5 psid or psig

0 to 15 psia

Package

SX01GSO

SX05GSO

SX15AHO

SX30AHO

DIP Package

Note 8: Long term stability over a

one year period.

SX01D

SX05D

SX15A

SX30A

SX100A

SX150A

SX15D

SX30D

SX01DP1

SX01DN

SX05DN

SX15AN

SX30AN

SX01GD2, SX01DD4

SX05GD2, SX05DD4

SX15AD2, SX15AD4

SX30AD2, SX30AD4

SX05DP1

Note 9: This parameter is not 100%

tested. It is guaranteed by

process design.

SX15AP1

0 to 30 psia

SX30AP1

0 to 100 psia

–

SX100AN SX100AHO SX100AD2, SX100AD4

0 to 150 psia

–

SX150AN SX150AHO

–

0 to 15 psid or psig

0 to 30 psid or psig

SX15DP1

SX15DN

SX30DN

SX100DN

–

SX15GSO

SX30GSO

SX100GSO

SX150GSO

SX15GD2, SX15DD4

SX30GD2, SX30DD4

SX100GD2, SX100DD4

–

SX30DP1

0 to 100 psid or psig SX100D

0 to 150 psid or psig SX150D

–

S X S e r i e s

ELECTRICAL CONNECTIONS

-Vo

GND

+Vo

Vs -Vo

GND

Vs +Vo

+Vo +Vo

GND GND

-Vo

+Vo

GND

-Vo

PIN 1 (GND)

PIN 2 (+Vo)

PIN 4 (-Vo)

PIN 3 (+Vs)

DD4

TO CAN

BUTTON AND "N"

GD2

AD2

AD4

PACKAGE OUTLINES

SEALING

SURFACE

Button Package

Ø.040 [Ø1.02]

PRESSURE PORT

VENT HOLE

(GAUGE UNITS

ONLY)

.20 [5.1]

Ø.42 [Ø10.6]

.02 [.5]

R.25 [R6.3]

.27 [6.9]

NOT A

SEALING

SURFACE

.25 [6.4]

.31 [7.9]

.42 [10.7]

.02 [.5]

.88 [22.4]

.36 [9.1]

REF.

.100 [2.54] TYP.

.020 [.51] TYP.

.02 [.4]

PIN 1

ID TAB

.55 [14]

Nipple Package

.27 [6.9]

TYP.

Ø.10 [Ø2.5]

Ø.04 [Ø1]

VENT HOLE

(GAUGE UNITS

ONLY)

.20 [5.1]

PERSSURE PORT

Ø.42 [Ø10.6]

R.25 [R6.3]

.27 [6.9]

.02 [.5]

Ø.07 [1.8]

.25 [6.4]

.31 [7.9]

.42 [10.7]

.02 [.5]

.36 [9.1]

REF.

.88 [22.4]

.015 [.38]

TYP

.100 [2.54] TYP.

.020 [.51] TYP.

PIN 1

ID TAB

MOUNTING FOR

N Housing Package

2X R.13

[R3.2]

SCREW OR TIE WRAP

2X Ø.125

[3.2]

2X R.075

[R1.9]

2X Ø.190

[4.8]

PIN 1

ID TAB

1.15

[29.2]

REF.

.25

[6.4]

.90

[22.9]

.10 [2.5]

TYP.

.05

[1.3]

.02

[.5] TYP.

.06

[1.5]

4X .02 [.4]

PIN THICKNESS

.34

[8.6]

.36

[9.1]

.28

[7.1]

.40

[10.2]

.285

[7.2]

.50

[12.7]

1.07 [27.2]

Ø.105 [2.67]

2° DRAFT

D2 Dip Package

.550

[13.97]

.315

[8.00]

.545

[13.84]

.470

[11.94]

Ø.025 [Ø.64]

VENT HOLE

.075

[1.91]

.24

[6.0] NOM

.110

[2.79] TYP

MOLDED PIN

IDENTIFIERS

(PINS 4 AND 1

ONLY)

(GAUGE UNITS ONLY)

.020

.60

[15.2] NOM

.010

[.25] TYP

[.51] TYP

.100

[2.54] TYP

S X S e r i e s

Low Cost Pressure Sensors

PACKAGE OUTLINES (con’t)

DD4 Dip Package

.300

[7.62] TYP

.550

[13.97]

.14

[3.6]

.380

[9.65]

Ø.090

[2.29] TYP

2° DRAFT

.25

.285

[7.24]

[6.4]

.470

[11.94]

.17

[4.3] TYP

.110

[2.79] TYP

.020

[.51] TYP

.60

[15.2] NOM

.010

[.25] TYP

.100

[2.54] TYP

AD4 Dip Package

.300

[7.62] TYP

.550

[13.97]

.14

[3.6]

.380

[9.65]

Ø.090

[2.29] TYP

.285

[7.24]

2° DRAFT

.470

[11.94]

.17

[4.3] TYP

.110

[2.79] TYP

.020

[.51] TYP

.60

[15.2] NOM

.010

[.25] TYP

.100

[2.54] TYP

TO5 Package

8X Ø.017 [Ø.43]

Ø.063 [Ø1.59] FOR

PARYLENE

Ø.219 [5.56] FOR

GEL FILL

LEADS EQUAL

SPACED ON

.53

[13.5]

.277

[7.04]

Ø.230 [5.84] BCD

.03

[.8]

Ø.360

[Ø9.14]

.036

[.92]

Ø.32

[8.2]

.032

[.81]

Ø.13

[Ø3.3]

TO39 Package

8X Ø.017 [Ø.43]

LEADS EQUAL

SPACED ON

Ø.063 [Ø1.59] FOR

PARYLENE

Ø.219 [5.56] FOR

GEL FILL

.50

[12.7]

.277

[7.04]

Ø.200 [5.08] BCD

Ø.360

[Ø9.14]

.036

[.92]

Ø.32

[8.2]

.032

[.81]

VENT HOLE

(GAUGE UNITS

ONLY)

1 408 954 6700

FAX: 408 954 9458

GENERAL DISCLAIMER: Invensys Sensor Systems reserves the right to make changes to its products and

their specifications at any time, without prior notice to anyone. Invensys Sensor Systems has made

every effort to ensure accuracy of the information contained herein but can assume no responsibility

for inadvertent errors, omissions, or subsequent changes. Invensys Sensor Systems does not assume any

responsibility for the use of any circuit or other information described within this document, and

further, makes no representations of any kind that the circuit and information described herein is free

of infringement of any intellectual property right or any other right of third parties. No express or

implied licenses of any Invensys Sensor Systems intellectual property right is granted by implication or

otherwise.

SenSym ICT

1804 McCarthy Boulevard

Milpitas, CA 95035

www.sensym-ict.com

SX15A [HONEYWELL]

相关型号：

SX15AD2

SX15AD2

SX15AD4

SX15AHO

SX15ALP

SX15AN

SX15AN

SX15AP

SX15AP1

SX15ASMPLT

SX15ASMPT

SX15ASMTP